MEDICAL COMPONENTS FOR WOUND CARE, OSTOMY AND MEDICAL DEVICES PRODUCT GUIDE
For over 35 years manufacturers around the world have trusted Transcontinental Advanced Coatings to deliver high-performance medical components for wound dressings and the advanced wound care market. The inspire range includes breathable polyurethane films, polyurethane foams, hydrophilic foams, laminates and adhesives, ultra-thin films, novel highly breathable adhesive systems and new developments in infection control. Our medical components are produced in ISO 9001-2015 facilities to exacting standards in a clean room environment and are tested to ensure compliance with the appropriate regulatory standards. POLYURETHANE FILM, FOAM AND ADHESIVE TECHNOLOGY FOR WOUND CARE DRESSINGS FEATURES Breathable Bacterial Barrier Skin Friendly Adhesive Pattern Coating Printed Waterproof Conformable Branded Colored Conductive BENEFITS Low Risk of Maceration / Rapid Wound Healing Less Chance of Infection Differentiation by Dressing Type Corporate Branding Differentiation and Correct Positioning of Dressing Withstands Patient Washing / Showering Dressing Stays in Place Longer Highly Breathable; A Variety of Adhesive Types Available Low Risk of Skin Reactions Suitable for Electrodes
POLYURETHANE FILMS ADHESIVE COATED POLYURETHANE FILMS UNITS OF MEASURE 15µm PU Film on Paper Liner 15µm PU Film 20µm PU Film on Polyester POLYURETHANE FILMS Film on Paper Liner Film Film 25µm PU a Paper Liner for hydrocolloid applications PU FILM/FOAM THICKNESS µm 15 15 20 30 30 30 25 60 OTHER COLORS ARE AVAILABLE ON REQUEST CASTING LINER RELEASE FORCE 60µm PU Film on a Paper Liner Clear 2151 2155 1201 2301 1301 2304 2250 2601 Pink 2150 1206 2350 2352 2650 Beige 2152 2340 White 2370 N/25mm/ PU Release 0.12 0.12 0.12 0.12 0.12 0.12 0.1 0.15 PU CASTING LINER TYPE Paper Polyester Polyester Paper Film Film Paper Paper FINISH Matt Clear Clear Clear Clear Clear Clear Clear Clear BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes MVTR UPRIGHT g/m 2 /24hrs 3500 3500 3000 2600 2300 2600 1400 17990 MVTR INVERTED g/m 2 /24hrs 15500 15500 9000 14500 9000 14500 TENSILE STRENGTH N/25mm 12.5 12.5 20 27.5 35 27.5 22 77 ELONGATION % 440 440 475 475 500 475 500 825 SUITABLE FOR GAMMA AGAINST COTTON SURFACE AGAINST TEFLON SURFACE Yes Yes Yes Yes Yes Yes Yes Yes 0.85 0.85 0.85 0.85 0.85 0.78 0.85 0.85 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes Yes Yes Yes UNITS OF MEASURE a Filmic Liner with High Tack ADHESIVE COATED FILMS Medium Tack Breathable Tack Tack 60µm PU with a Medium Tack PATTERN COATED ADHESIVE COATED FILMS a High Tack Pattern 15µm PU a High Tack Pattern PU FILM/FOAM THICKNESS µm 30 30 30 30 30 60 30 30 30 15 20 OTHER COLORS AVAILABLE ON REQUEST CASTING LINER RELEASE FORCE 20µm PU Clear 2327 2331 1305 2325 2375P 2155P 1201P Pink 2353 2351 2601 2371P 2376P 1206P Beige White N/25mm/ PU Release 0.15 0.15 0.14 0.15 0.15 N/A 0.2 0.2 0.2 0.12 0.12 PU CASTING LINER TYPE Film Film Film Film Film N/A Film Film Film Film Film FINISH Matt Clear / Matt Clear / Matt Clear / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Clear / Matt BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes MVTR UPRIGHT g/m 2 /24hrs 600 600 1400 800 600 450 1500 1600 2000 3500 2500 MVTR INVERTED g/m 2 /24hrs 650 650 1400 850 650 500 4400 4400 8000 9000 5000 TENSILE STRENGTH N/25mm 27.5 27.5 35 27.5 27.5 >50 27.5 27.5 27.5 14 20 ELONGATION % 475 475 50 475 475 800 475 475 475 400 475 SUITABLE FOR GAMMA SUITABLE FOR ETHYLENE OXIDE Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes LINER TYPE N/A Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper TYPICAL ADHESION TO STEEL N/25mm 19 13 19 12 13 13 17 17 8 8 17 ADHESIVE DEPOSIT g/m 2 40 40 25 25 40 40 18 18 12 12 18 PATTERN COATING COVERAGE % 100 100 100 100 100 100 75 75 50 50 75 LINER RELEASE N/25mm 0.05 0.05 0.04 0.07 0.07 0.06 0.1 0.1 0.1 0.1 0.06 AGAINST COTTON SURFACE AGAINST TEFLON SURFACE 0.78 0.78 0.78 0.95 0.95 0.85 0.95 0.95 0.95 0.95 0.95 0.3 0.3 0.3 0.3 0.3 0.3 0.45 0.45 0.45 0.45 0.45 PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes N/A Yes Yes Yes Yes Yes Breathable film, typically for use in medical products as a backing film for hydrophilic foams, hydrocolloid dressings and adhesive coated secondary wound dressings for the consumer and professional markets. Available in Clear, Pink, Beige and White and can be printed in-house with FDA approved inks. Exceptional breathability Superior soft feel and high conformability Waterproof, bacterial barrier Good transparency and exceptional matt surface Tested in accordance with ISO 10993 (Biological evauation of medical devices) Available with either film or paper casting liners Available in Master Rolls or slit to the customer s specification Adhesive coated films are used for a variety of applications including secondary wound dressings, island dressings and plasters. The materials with clear filmic casting liners are also suitable for applications where there is a need to see the wound as the dressing is applied or for incise applications. Available in Clear, Pink, or Blue and can be printed with FDA approved inks. Exceptional breathability Superior soft feel and high conformability Waterproof, bacterial barrier Good transparency and exceptional matt surface Tested in accordance with ISO 10993 (Biological evauation of medical devices) Available with either film or paper casting liners Available in Master Rolls or slit to the customer's specification
POLYURETHANE FOAMS SPECIALTY PRODUCTS FOAMS UNITS OF MEASURE 130µm Film / Foam 15µm PU Film / Foam 250µm PU Film / Foam 400µm Film / Foam PU FILM/FOAM THICKNESS µm 130 250 250 400 OTHER COLORS ARE AVAILABLE ON REQUEST Clear Pink 7210 7252 7255 7242 Beige 7250 7240 White 7251 7241 PU CASTING LINER TYPE Paper Paper Paper Paper FINISH Matt Matt Matt Matt Matt CASTING LINER RELEASE FORCE N/25mm/PU Release 0.10 0.15 0.15 0.15 BACTERIAL BARRIER No Yes Yes Yes MVTR UPRIGHT g/m 2 /24hrs 2500 4000 1500 MVTR INVERTED g/m 2 /24hrs 2500 3500 5000 2500 TENSILE STRENGTH N/25mm 12 25 20 30 ELONGATION % 400 450 450 450 SUITABLE FOR GAMMA No Yes* No Yes* AGAINST COTTON SURFACE AGAINST TEFLON SURFACE - 0.85 0.85 0.85-0.35 0.35 0.35 PRINTABLE PU CASTING LINER Yes Yes Yes Yes Transcontinental Advanced Coatings has experience in coating specialty products to meet particular customer needs. This expertise includes: Printing of films Patterned adhesive coating Gamma sterilizable adhesives Pigmentation of films Coating of customer supplied/approved adhesive Recommended storage conditions of 23 C ±5 C, 50% ±10% Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed are for guidance purposes only and do not consitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contained herein is intended as a recommendation to use our products to infringe any patent. PLEASE CONTACT Transcontinental Advanced Coatings directly if your application has not been covered by our standard range (contact details below) *Dependent on dose CONTACT CHINA Site: +86 20 3221 8338 Transcontinental China Factory 2-101 No 96 Banhe Road, Huangpu District Guangzhou 510730 Uncoated polyurethane film/foam laminate components that are typically used for professional wound care applications. Can be printed with FDA approved inks. Available in White, Pink, Beige and Brown. Exceptionally soft feel with cusioning and insulating characteristics Waterproof and breathable Outer film provides bacterial barrier and easy clean surface Used to create dressings that can be applied without the need for support films/papers Available in Master Rolls or slit to the customer's specification UK Site: +44 1978 660241 Transcontinental United Kingdom Ash Road North Wrexham Industrial Estate Wrexham, LL13 9UF USA Site: +1 704 847 9171 Transcontinental Matthews 700 Crestdale Road Matthews, NC 28105 For more information, please visit www.tc.tc/advancedcoatings or email communications@tc.tc