PRODUCT SPECIFICATIONS AIR HANDLERS CXM ELITE SERIES R-0A Ready - Multi-Position ulletin No. 0 March 0 Supersedes February 0 Nominal Capacity -. to Tons Optional Electric Heat -. to 0 kw MODEL NUMER IDENTIFICATION C X m - 0-0 - - 0 Unit Type C = Air Handler Minor Revision Number Refrigerant Type X = R-0A Series Configuration M = Multi-Position Nominal Cooling Capacity - Tons 08/0 =. to tons 00 = to. tons 0 = tons 0 =. tons 08 = tons 00 = tons Refrigerant Metering Device = Fixed Orifice = TXV - leedport (indoor unit) = TXV - Non-bleedport (indoor unit) = TXV - Non-bleedport (outdoor unit) = TXV - R-0A Non-bleedport (indoor unit) Voltage 0 = 08/0V-0hz-ph 0 = 0V 0hz ph
FEATURES CONTENTS lower Data... Dimensions... Electrical Data... Electric Heat Data... 8 Features... Installation Clearances With Electric Heat... Model Number Identification... Optional Accessories... Specifications... WARRANTY F H G H All covered components - Limited five years in residential applications, one year in non-residential applications. Refer to Lennox Limited Warranty Certificate included with each unit for additional details. APPROVALS Tested with matching air conditioners and heat pump units in the Lennox Research Laboratory environmental test room in accordance with AHRI Standard 0/0. Optional electric heaters are rated in accordance with US Department of Energy (DOE) test procedures and Federal Trade Commission (FTC) labeling regulations. lower performance data according to unit tests conducted in Lennox air test chamber. Air handlers are UL Listed to US and Canadian safety standards and components within are bonded for grounding to meet safety standards for servicing required by CEC and NEC. Air handler units are approved for installation in manufactured housing and mobile homes. ISO 900 Registered Manufacturing Quality System. APPLICATIONS. to ton nominal sizes. Multi-position (upflow, downflow or horizontal) applications. Applicable to expansion valve systems in R-0A cooling applications and check and expansion valve systems in R-0A heat pump applications. See bulletins in section Air Conditioners for cooling capacities. See bulletins in section Heat Pump Outdoor Units for cooling and heating capacities. Optional field installed electric heaters available in several sizes for additive heating capacity. A I D C REFRIGERANT SYSTEM Copper Tube/Enhanced Fin Indoor Coil Lennox designed and fabricated twin coils. Assembled in A configuration. Provides extra large surface and contact area, excellent heat transfer and low air resistance for maximum efficiency. Precise circuiting for uniform refrigerant distribution. Precisely spaced ripple-edged aluminum fins fitted to durable seamless copper tubes. Fins are strengthened to resist bending and are equipped with collars that grip tubing for maximum contact area. Lanced fins provide maximum exposure of fin surface to air stream. Long life copper tubing is easy to service. Rifled tubing provides superior heat transfer. Flared shoulder tubing joints and silver soldering provide tight, leakproof joints. Coil thoroughly factory tested under high pressure to insure leakproof construction. CXM / Page
C D E FEATURES REFRIGERANT SYSTEM (continued) Refrigerant Line Connections Suction (vapor) and liquid lines have sweat connections that extended outside of the cabinet for ease of connection. See dimension drawings for locations. Check and Expansion Valve Furnished For use with R-0A systems. Wide range valve with Chatleff style fitting. Factory installed on all models, internal to cabinet. CAINET Constructed of heavy-gauge galvanized steel. Completely insulated with thick fiberglass insulation. Pre-painted steel cabinets have mildly textured enamel finish with primer coat on unpainted side of all panels. Units are shipped in one piece but may be disassembled into two separate sections for ease of installation in tight applications. See dimension drawings. Thick rubber gasket between sections of the two piece cabinets provides an air tight seal. No external screw heads on sides of cabinet for tight installations without damage to walls or woodwork. Removable panels provide complete service access. Electrical inlets provided in sides and top of cabinet. See dimension drawings for locations. Low Leakage Cabinet All models have less than % air leakage and meet ANSI/ASHRAE Standard 9-00 Method of Test for Determining the Air Tightness of HVAC Equipment. Multi-Position Capability Shipped for upflow and horizontal right-hand discharge. Quickly converted to downflow or left-hand, horizontal air discharge. Optional Kit required for conversion to downflow. Drain Pans Drain pans designed for upflow, downflow or horizontal applications. Deep, corrosion resistant plastic drain pans have dual pipe drains. See dimension drawings. F G Optional Accessories Downflow Combustible Flooring ase ase is required for models with electric heat installed in downflow position on combustible floors. Horizontal Support Frame Kit Provides support of unit in horizontal applications. Consists of () x -/ x -/8 in. and () x x -7/8 in. painted heavy gauge cold rolled steel support channels with assembly and suspending holes. olts and nuts furnished for field assembly. Suspending rods must be field provided. Side Return Unit Stand (Upflow Only) Raises unit in. above floor for side return air duct connection. Eliminates need for wooden platform construction. All aluminum construction. Two adjustable frames fit -08/0 thru -00 models. Wall Hanging racket Kit (Upflow Only) Allows unit to be hung on wall at any height. Consists of heavy-gauge steel support brackets (one for air handler, one for wall mount). Screws furnished for fastening one bracket to unit. olts for fastening one bracket to wall are field provided. LOWER Lennox designed and built direct-drive blower. Statically and dynamically balanced before installation in unit. Resiliently mounted multi-speed leadless motor with plug-in connections. Choice of blower speeds. See blower performance tables. Speed changes easily accomplished by a simple wiring change. lower slides out of cabinet for servicing. CONTROLS Transformer and lower Cooling Relay volt transformer with in-line fuse and blower cooling relay furnished as standard. Factory installed in the unit control box. Terminal strip furnished. Optional Accessories Thermostat See Thermostat bulletins in Controls section and Lennox Price ook for a complete list of thermostats. CXM / Page
H FEATURES OPTIONAL ELECTRIC HEAT Field install internal to unit cabinet. Available in several voltages and kw sizes. See Electric Heat tables. Helix wound nichrome heating elements exposed directly in air stream resulting in instant heat transfer, low element temperatures and long service life. Each element equipped with accurately located limit control with fixed temperature off setting and automatic reset. Supplemental thermal cutoff limit control, provides positive protection in case of excessive temperatures. Thermal sequencer relay brings elements on and off line, in sequence and equal increments, with time delay between each. Initiates and terminates blower operation. Heating control relay(s) furnished as standard. Control box and access cover constructed of heavy gauge galvanized steel. Factory assembled with controls installed and wired. Electric heat low voltage controls plug-in to air handler. reaker Models The following heaters are equipped with circuit breakers for overload and short circuit protection: EC9-C, -C, -C, -8C, -9C, -0C, -.C, -C, -0C, -C and -0C (08/0V-ph) EC9-C, -0C and -C (08/0V-ph) Factory wired and mounted on electric heat unit. Current sensitive and temperature actuated. Manual reset. breakers qualify as disconnect means at unit in many areas, eliminate the need for field provided disconnect. Consult local electrical code in your area. NOTE - 0V- phase air handlers can be used in 7V applications. 7V electric heaters are shipped with a 7V to 0V step-down transformer. I Optional Accessories reaker Cover Kit Flexible plastic cover protects circuit breaker. Recommended in areas with high humidity or unconditioned areas to prevent nuisance tripping. Single-Point Power Source Control ox Control ox may be used with optional electric heat when single power supply is connected to multi-circuit electric heat. Field installs external to the unit cabinet on either side or top. Constructed of heavy gauge steel, baked enamel finish, prepunched mounting holes, electrical inlet knockouts, and terminal strip. Removable cover provides easy access. Dimensions (H x W x D) - 7 x 7 x in. INDOOR AIR QUALITY Air Filter Tool-less access to filter area for quick and easy servicing. Disposable frame type filter furnished and factory installed in rails in cabinet. See Specifications tables for sizes. CXM / Page
SPECIFICATIONS General Data Model Number CXM -08/0 Connections in. Evaporator Coil CXM -00 CXM -0 CXM -0 CXM -08 CXM -00 Nominal Tonnage. -.. Refrigerant R-0A R-0A R-0A R-0A R-0A R-0A Suction (vapor) line - sweat /8 / / 7/8 7/8 7/8 Liquid line - sweat /8 /8 /8 /8 /8 /8 Condensate drain - fpt () / () / () / () / () / () / Net face area - ft....0.0 7. 7. Tube outside diameter - in. /8 /8 /8 /8 /8 /8 Number of rows Fins per inch lower Data Wheel nom. diameter x width - in. 0 x 7 0 x 8 x 8 x 8 -/ x 9 x 9 lower motor output - hp / / / / / / Filters Number Size - in. x 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 x x 0 x x Shipping Data Package - lbs. 7 77 8 0 0 ELECTRICAL DATA overcurrent protection (unit only) all voltages Voltage - phase 08/0V 08/0V 08/0V 08/0V 08/0V 08/0V Voltage - phase - - - - - - 0V - - - 0V 0V circuit ampacity (unit only) - 08/0V OPTIONAL ACCESSORIES - ORDER SEPARATELY 0V - - - - - - - - - reaker Cover Kit 8W0 8W0 8W0 8W0 8W0 8W0 Downflow Combustible Flooring ase J7 K K K K K Downflow Conversion Kit 8M7 8M7 8M7 8M7 8M7 8M7 Horizontal Support Frame Kit J8 J8 J8 J8 J8 J8 Side Return Unit Stand (Upflow) K K K K K K Single-Point Power Source Control ox H9 H9 H9 H9 H9 H9 Wall Hanging racket Kit (Upflow) K0 K0 K0 K0 K0 K0 Disposable frame type filter. HACR type circuit breaker or fuse. lower motor is 0V phase. Optional electric heat is 0V phase. REPLACEMENT CIRCUIT REAKERS Voltage amp 0 amp amp 0 amp amp 0 amp 0 amp 08/0V - Phase pole breaker 08/0V - Phase pole breaker K 7K70 7K07 9K 7K7 K 7K7 - - - W7 - - - K 8M8 K K7 INSTALLATION CLEARANCES WITH ELECTRIC HEAT Cabinet 0 inch (0 mm) To Plenum inch ( mm) To Outlet Duct within feet (9 mm) inch ( mm) Floor See Note # Service / Maintenance See Note # Units installed on combustible floors in the downflow position with electric heat require optional downflow combustible flooring base. Front service access - inches (0 mm) minimum. NOTE - If cabinet depth is more than inches (0 mm), allow a minimum of the cabinet depth plus inches ( mm). CXM / Page
LOWER DATA CXM-08/0 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 00 89 00 700 0.0 0 0 890 9 9 0.0 000 87 90 90 0 0. 980 80 8 80 0.0 90 0 8 80 0 0. 9 8 7 0 0 0.0 90 800 0.0 80 0 7 0 90 0 0.0 780 9 8 90 0.0 70 80 0 0 70 7 0.70 0 00 9 0.7 7 9 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-00 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 90 8 7 0 0.0 9 80 90 0 07 0 0.0 90 7 90 08 00 0. 70 7 0 08 9 0.0 0 0 0 0 8 0. 80 0 0 9 00 70 0.0 0 80 980 0.0 9 0 890 0 80 0 0.0 70 7 7 90 0.0 0 0 0 8 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-0 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 0 0 90 9 0.0 0 9 0 8 9 0 0.0 0 80 70 80 00 0. 9 70 80 7 0 0 0.0 7 90 70 0 0 0. 0 0 8 0 00 0 0.0 0 7 0 00 00 0.0 00 00 90 0.0 0 7 00 00 9 0.0 00 90 80 77 0 0.70 90 0 80 90 0 0.7 870 0 70 8 9 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-0 LOWER PERFORMANCE (0V) External Air Volume & Motor Watts at Specific lower Taps Static High Low Pressure in. w.g. cfm Watts cfm Watts 0 0 0 90 0.0 0 9 0 8 0.0 0 80 70 80 0. 9 70 80 7 0.0 7 90 70 0. 0 0 8 0 0.0 0 7 0 0.0 00 0.0 0 7 00 00 0.0 00 90 80 0.70 90 0 80 0.7 870 0 70 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-0 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 8 00 70 0.0 790 8 70 0.0 70 0 0 70 0. 70 0 0 0 0 0.0 0 0 0 0 0 0. 0 0 70 00 0.0 9 70 0 0.0 0 0 90 9 0 0.0 90 0 9 090 0 0.0 00 9 8 0.70 9 8 87 0 79 0 0.7 87 70 780 9 700 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM / Page
LOWER DATA CXM-08 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 90 90 78 0 7 0 0.0 89 8 770 80 0 0.0 870 80 70 0 7 0. 80 70 70 00 0 0.0 800 8 90 0 0. 7 0 80 0 0.0 700 0 00 80 9 0.0 80 8 0 90 70 0.0 8 0 0 70 0.0 0 0 90 80 00 0 0.70 0 000 0 80 9 0.7 90 00 900 70 80 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-08 LOWER PERFORMANCE (0V) External Air Volume & Motor Watts at Specific lower Taps Static High Low Pressure in. w.g. cfm Watts cfm Watts 0 870 0 77 0 0.0 87 0 77 0 0.0 870 90 7 0. 80 8 70 0 0.0 8 7 70 00 0. 790 0 8 90 0.0 7 80 0.0 0 0 0 0.0 70 80 0 0.0 70 9 8 0.70 00 8 97 0 0.7 7 0 70 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-00 LOWER PERFORMANCE (08/0V) External Air Volume & Motor Watts at Specific lower Taps Static High Medium Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts 0 780 0 70 77 8 0.0 00 770 00 77 90 0.0 08 7 99 770 80 0. 00 70 97 70 70 0.0 00 70 90 7 0 0. 000 70 9 7 0 0.0 90 7 880 0 9 0.0 870 8 79 80 0 0 0.0 7 90 0 7 0.0 0 0 0 0.70 90 80 9 0 0.80 90 0 0 0 7 0.8 9 0 00 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM-00 LOWER PERFORMANCE (0V) External Air Volume & Motor Watts at Specific lower Taps Static High Low Pressure in. w.g. cfm Watts cfm Watts 0 0 79 9 70 0.0 0 780 90 700 0.0 080 7 90 8 0. 0 7 90 7 0.0 00 70 880 0 0. 9 7 80 0.0 90 70 8 0 0.0 80 80 7 00 0.0 70 0 70 0.0 8 0 0 0.70 0 8 90 0 0.80 0 0 7 0.8 0 NOTE - All air data is measured external to unit with air filter in place with bottom return air. Electric heaters have no appreciable air resistance. CXM / Page 7
ELECTRIC HEAT DATA - CXM-08/0 SINGLE PHASE. kw lbs. kw lbs. kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs. Model Number No. of Stages Input Volts kw tuh lower Motor Full Load Amps EC9-. (L7) 08.9,00. EC9- (L0) EC9-C (L) 0A breaker EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. 0. 7,00. 0. 7,800. 0. 8,00. 08.0 0,0. 0 0 0.,0. 0.7,0. 0.0,0. 08.8,800. 0.,00. 8 0 0.,700. 8 0 0.0 7,00. 8 0 08.,00. 9 0 0.0 7,00. 0. 8,800. 0.0 0,00. 08.0 0,00. 8 0 0.7,900. 0 7.,00. 0 8.0 7,00. 08.8,00. 0 7.,800. 9 0 0 8. 8,00. 9 0 0 9.0 0,700. 9 0 08 7.,00. 7 0 0 8. 8,700. 0 0 9.,00. 0 0 0.0,00. 0 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page 8
ELECTRIC HEAT DATA - CXM-00 SINGLE PHASE kw lbs. kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs.. kw 0 lbs. kw lbs. Model Number EC9- (L0) EC9-C (L) 0A breaker EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker EC9-.C (L) () A and () 0A breaker EC9-C (L) () 0A and () 0A breaker No. of Stages Input NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps Volts kw tuh Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,0.7 0 - - - 0 - - - - - - - - - 0.,0.7 - - - - - - - - - - - - 0.7,0.7 - - - - - - - - - - - - 0.0,0.7 - - - - - - - - - - - - 08.8,800.7 - - - - - - - - - - - - 0.,00.7 8 - - - 0 - - - - - - - - - 0.,700.7 8 - - - 0 - - - - - - - - - 0.0 7,00.7 8 - - - 0 - - - - - - - - - 08.,00.7 0 - - - 0 - - - - - - - - - 0.0 7,00.7 - - - - - - - - - - - - 0. 8,800.7 - - - - - - - - - - - - 0.0 0,00.7 - - - - - - - - - - - - 08.0 0,00.7 8 - - - 0 - - - - - - - - - 0.7,900.7 - - - - - - - - - - - - 0 7.,00.7 - - - - - - - - - - - - 0 8.0 7,00.7 - - - - - - - - - - - - 08.8,00.7 - - - - - - - - - - - - 0 7.,800.7 9 - - - 0 - - - - - - - - - 0 8. 8,00.7 9 - - - 0 - - - - - - - - - 0 9.0 0,700.7 9 - - - 0 - - - - - - - - - 08 7.,00.7 7 - - - 0 - - - - - - - - - 0 8. 8,700.7 - - - 0 - - - - - - - - - 0 9.,00.7 - - - 0 - - - - - - - - - 0 0.0,00.7 - - - 0 - - - - - - - - - 08 9.,000.7 0 0 0 0.,800.7 0 70 0. 9,00.7 0 70 0.,00.7 0 7 70 08. 8,00.7 7 0 7 80 0.,000.7 8 0 0 7 80 0.8 7,000.7 8 0 0 7 80 0.0,00.7 8 0 0 80 80 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page 9
ELECTRIC HEAT DATA - CXM-0 SINGLE PHASE kw lbs. kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs.. kw 0 lbs. kw lbs. 0 kw 9 lbs. THREE PHASE 8 kw lbs. 0 kw lbs. kw lbs. 0 kw 9 lbs. Model Number EC9- (L0) EC9-C (L) 0A breaker EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker EC9-.C (L) () A & () 0A breaker EC9-C (L) () 0A & () 0A reaker EC9-0C (L8) () 0A & () 0A reaker EC9-8 (8K) EC9-0 (8K) EC9-0 (8K7) () 0A Fuses EC9-C (8K) () 0A breaker EC9- (8K8) () A Fuses EC9-0C (8K) () A breaker No. of Stages Input NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps Volts kw tuh Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,0.7 0 - - - 0 - - - - - - - - - 0.,0.7 - - - - - - - - - - - - 0.7,0.7 - - - - - - - - - - - - 0.0,0.7 - - - - - - - - - - - - 08.8,800.7 - - - - - - - - - - - - 0.,00.7 8 - - - 0 - - - - - - - - - 0.,700.7 8 - - - 0 - - - - - - - - - 0.0 7,00.7 8 - - - 0 - - - - - - - - - 08.,00.7 0 - - - 0 - - - - - - - - - 0.0 7,00.7 - - - - - - - - - - - - 0. 8,800.7 - - - - - - - - - - - - 0.0 0,00.7 - - - - - - - - - - - - 08.0 0,00.7 8 - - - 0 - - - - - - - - - 0.7,900.7 - - - - - - - - - - - - 0 7.,00.7 - - - - - - - - - - - - 0 8.0 7,00.7 - - - - - - - - - - - - 08.8,00.7 - - - - - - - - - - - - 0 7.,800.7 9 - - - 0 - - - - - - - - - 0 8. 8,00.7 9 - - - 0 - - - - - - - - - 0 9.0 0,700.7 9 - - - 0 - - - - - - - - - 08 7.,00.7 7 - - - 0 - - - - - - - - - 0 8. 8,700.7 - - - 0 - - - - - - - - - 0 9.,00.7 - - - 0 - - - - - - - - - 0 0.0,00.7 - - - 0 - - - - - - - - - 08 9.,000.7 0 0 0 0.,800.7 0 70 0. 9,00.7 0 70 0.,00.7 0 7 70 08. 8,00.7 7 0 7 80 0.,000.7 8 0 0 7 80 0.8 7,000.7 8 0 0 7 80 0.0,00.7 8 0 0 80 80 08.0,00.7 0 9 00 0.8 7,00.7 9 0 0 97 00 0 8.,700.7 9 0 0 97 00 0 0.0 8,00.7 9 0 0 0 0 08.0 0,00.7 - - - - - - - - - - - - 0.7,900.7 - - - 0 - - - - - - - - - 0 7.,00.7 - - - 0 - - - - - - - - - 0 8.0 7,00.7 - - - 0 - - - - - - - - - 08 7.,00.7 8 - - - 0 - - - - - - - - - 0 8. 8,700.7 - - - - - - - - - - - - 0 9.,00.7 - - - - - - - - - - - - 0 0.0,00.7 - - - - - - - - - - - - 0 8. 8,700. - - - 0 - - - - - - - - - 0 9.,00. - - - 0 - - - - - - - - - 80 0.0,00. - - - 0 - - - - - - - - - 08. 8,00.7 - - - - - - - - - - - - 0.,000.7 7 - - - 0 - - - - - - - - - 0. 7,000.7 7 - - - 0 - - - - - - - - - 0.0,00.7 7 - - - 0 - - - - - - - - - 0.,000. - - - 0 - - - - - - - - - 0.8 7,000. - - - 0 - - - - - - - - - 80.0,00. - - - 0 - - - - - - - - - 08.0,00.7 8 0 0 0 0.8 7,00.7 8 0 0 8.,700.7 8 0 0 0.0 8,00.7 70 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page 0
ELECTRIC HEAT DATA - CXM-0 SINGLE PHASE kw lbs. kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs.. kw 0 lbs. kw lbs. 0 kw 9 lbs. THREE PHASE 8 kw lbs. 0 kw lbs. kw lbs. 0 kw 9 lbs. Model Number EC9- (L0) EC9-C (L) 0A breaker EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker EC9-.C (L) () A & () 0A breaker EC9-C (L) () 0A & () 0A reaker EC9-0C (L8) () 0A & () 0A reaker EC9-8 (8K) EC9-0 (8K) EC9-C (8K) () 0A breaker EC9-0C (8K) () A breaker No. of Stages Input NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps Volts kw tuh Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,0. - - - - - - - - - - - - 0.,0. - - - - - - - - - - - - 0.7,0. - - - - - - - - - - - - 0.0,0. - - - - - - - - - - - - 08.8,800. - - - 0 - - - - - - - - - 0.,00. 9 - - - 0 - - - - - - - - - 0.,700. 9 - - - 0 - - - - - - - - - 0.0 7,00. 9 - - - 0 - - - - - - - - - 08.,00. 0 - - - 0 - - - - - - - - - 0.0 7,00. - - - - - - - - - - - - 0. 8,800. - - - - - - - - - - - - 0.0 0,00. - - - - - - - - - - - - 08.0 0,00. 0 - - - 0 - - - - - - - - - 0.7,900. - - - - - - - - - - - - 0 7.,00. - - - - - - - - - - - - 0 8.0 7,00. - - - - - - - - - - - - 08.8,00. - - - - - - - - - - - - 0 7.,800. 0 - - - 0 - - - - - - - - - 0 8. 8,00. 0 - - - 0 - - - - - - - - - 0 9.0 0,700. 0 - - - 0 - - - - - - - - - 08 7.,00. 8 - - - 0 - - - - - - - - - 0 8. 8,700. - - - 0 - - - - - - - - - 0 9.,00. - - - 0 - - - - - - - - - 0 0.0,00. - - - 0 - - - - - - - - - 08 9.,000. 70 0 0.,800. 0 70 0. 9,00. 0 70 0.,00. 0 8 70 08. 8,00. 7 0 0 7 80 0.,000. 9 0 0 7 80 0.8 7,000. 9 0 0 7 80 0.0,00. 9 0 0 8 90 08.0,00. 0 9 00 0.8 7,00. 0 0 0 99 00 0 8.,700. 0 0 0 99 00 0 0.0 8,00. 0 0 0 07 0 08.0 0,00. - - - - - - - - - - - - 0.7,900. 7 - - - 0 - - - - - - - - - 0 7.,00. 7 - - - 0 - - - - - - - - - 0 8.0 7,00. 7 - - - 0 - - - - - - - - - 08 7.,00. 9 - - - 0 - - - - - - - - - 0 8. 8,700. - - - - - - - - - - - - 0 9.,00. - - - - - - - - - - - - 0 0.0,00. - - - - - - - - - - - - 08. 8,00. - - - - - - - - - - - - 0.,000. 8 - - - 0 - - - - - - - - - 0. 7,000. 8 - - - 0 - - - - - - - - - 0.0,00. 8 - - - 0 - - - - - - - - - 08.0,00. 9 0 0 0 0.8 7,00. 0 0 0 8.,700. 0 0 0 0.0 8,00. 70 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page
ELECTRIC HEAT DATA - CXM-08 SINGLE PHASE kw lbs. kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs.. kw 0 lbs. kw lbs. 0 kw 9 lbs. kw 9 lbs. Model Number EC9- (L0) EC9-C (L) 0A breaker EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker EC9-.C (L) () A and () 0A breaker EC9-C (L) () 0A and () 0A breaker EC9-0C (L8) () 0A and () 0A breaker EC9-C (L9) () 0A breakers No. Volts kw of Input Input Stages tuh Input lower Motor Full Load Amps NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. Ckt Ckt Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,0. - - - - - - - - - - - - - - - - - - 0.,0. - - - - - - - - - - - - - - - - - - 0.7,0. - - - - - - - - - - - - - - - - - - 0.0,0. - - - - - - - - - - - - - - - - - - 08.8,800. - - - - - - 0 - - - - - - - - - - - - 0.,00. 9 - - - - - - 0 - - - - - - - - - - - - 0.,700. 9 - - - - - - 0 - - - - - - - - - - - - 0.0 7,00. 9 - - - - - - 0 - - - - - - - - - - - - 08.,00. 0 - - - - - - 0 - - - - - - - - - - - - 0.0 7,00. - - - - - - - - - - - - - - - - - - 0. 8,800. - - - - - - - - - - - - - - - - - - 0.0 0,00. - - - - - - - - - - - - - - - - - - 08.0 0,00. 0 - - - - - - 0 - - - - - - - - - - - - 0.7,900. - - - - - - - - - - - - - - - - - - 0 7.,00. - - - - - - - - - - - - - - - - - - 0 8.0 7,00. - - - - - - - - - - - - - - - - - - 08.8,00. - - - - - - - - - - - - - - - - - - 0 7.,800. 0 - - - - - - 0 - - - - - - - - - - - - 0 8. 8,00. 0 - - - - - - 0 - - - - - - - - - - - - 0 9.0 0,700. 0 - - - - - - 0 - - - - - - - - - - - - 08 7.,00. 8 - - - - - - 0 - - - - - - - - - - - - 0 8. 8,700. - - - - - - 0 - - - - - - - - - - - - 0 9.,00. - - - - - - 0 - - - - - - - - - - - - 0 0.0,00. - - - - - - 0 - - - - - - - - - - - - 08 9.,000. - - - - - - 70 0 0.,800. - - - 0 - - - 70 0. 9,00. - - - 0 - - - 70 0.,00. - - - 0 - - - 8 70 08. 8,00. 7 - - - 0 0 - - - 7 80 0.,000. 9 - - - 0 0 - - - 7 80 0. 7,000. 9 - - - 0 0 - - - 7 80 0.0,00. 9 - - - 0 0 - - - 8 90 08.0,00. - - - 0 - - - 9 00 0.8 7,00. 0 - - - 0 0 - - - 99 00 0 8.,700. 0 - - - 0 0 - - - 99 00 0 0.0 8,00. 0 - - - 0 0 - - - 07 0 08 8.8,00. 0 0 8 0.0 7,700. 7 0 0 0 0 0.0 78,00. 7 0 0 0 0 0.0 8,00. 7 0 0 0 0 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page
ELECTRIC HEAT DATA - CXM-08 THREE PHASE 8 kw lbs. 0 kw lbs. kw lbs. 0 kw 9 lbs. kw 9 lbs. Model Number EC9-8 (8K) Terminal block EC9-0 (8K) EC9-0 (8K7) () 0A Fuses EC9-C (8K) 0A breaker EC9- (8K8) () A Fuses EC9-0C (8K) () A breaker EC9-0 (8K9) () A Fuses EC9-0 (8K) () A Fuses EC9-C (8K) () A breaker EC9- (8K0) () 0A Fuses EC9- (8K) () A Fuses No. of Stages Input NOTE includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps 7 Volts kw tuh Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,00. - - - - - - - - - - - - 0.7,900. 7 - - - 0 - - - - - - - - - 0 7.,00. 7 - - - 0 - - - - - - - - - 0 8.0 7,00. 7 - - - 0 - - - - - - - - - 08 7.,00. 9 - - - 0 - - - - - - - - - 0 8. 8,700. - - - - - - - - - - - - 0 9.,00. - - - - - - - - - - - - 0 0.0,00. - - - - - - - - - - - - 0 8. 8,700. 7 - - - 0 - - - - - - - - - 0 9.,00. 7 - - - 0 - - - - - - - - - 80 0.0,00. 7 - - - 0 - - - - - - - - - 08. 8,00. - - - - - - - - - - - - 0.,000. 8 - - - 0 - - - - - - - - - 0. 7,000. 8 - - - 0 - - - - - - - - - 0.0,00. 8 - - - 0 - - - - - - - - - 0.,000. - - - 0 - - - - - - - - - 0.8 7,000. - - - 0 - - - - - - - - - 80.0,00. - - - 0 - - - - - - - - - 08.0,00. 9 0 0 0 0.8 7,00. 0 0 0 8.,700. 0 0 0 0.0 8,00. 70 0.8 7,00. - - - - - - - - - - - - 0 8.,700. - - - - - - - - - - - - 80 0.0 8,00. - - - - - - - - - - - - 0.8 7,00. - - - 0 - - - - - - - - - 7 8.,700. - - - 0 - - - - - - - - - 00 0.0 8,00. - - - 0 - - - - - - - - - 08 8.8,00. 7 0 0 70 70 0.0 7,700. 0 7 80 0.0 78,00. 0 7 80 0.0 8,00. 0 78 80 0.0 7,700. 9 - - - - - - - - - - - - 0.0 78,00. 9 - - - - - - - - - - - - 80.0 8,00. 9 - - - - - - - - - - - - 0.0 7,700. - - - - - - - - - - - - 7.0 78,00. - - - - - - - - - - - - 00.0 8,00. - - - - - - - - - - - - Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. All 7v electric heaters are used with 0V air handler units. A 7V to 0V Step-down transformer for the air handler unit is furnished with all 7V electric heaters. lower motor is rated at 0V. 7 HACR type circuit breaker or fuse. CXM / Page
ELECTRIC HEAT DATA - CXM-00 Model Number SINGLE PHASE kw EC9- (L0) lbs. EC9-C (L) 0A breaker kw lbs. kw lbs. 8 kw lbs. 9 kw lbs. 0 kw lbs.. kw 0 lbs. kw lbs. 0 kw 9 lbs. kw 9 lbs. 0 kw 9 lbs. EC9- (L) EC9-C (L7) 0A breaker EC9- (L) EC9-C (L9) A breaker EC9-8 (L0) EC9-8C (L) A breaker EC9-9C (L) 0A breaker EC9-0 (L) EC9-0C (L) 0A breaker EC9-.C (L) () A and () 0A breaker EC9-C (L) () 0A and () 0A breaker EC9-0C (L8) () 0A and () 0A breaker EC9-C (L9) () 0A breakers EC9-0C (L0) () 0A breakers No. of Stages Volts kw Input Input tuh Input NOTE - includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps Ckt Ckt Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,0.9 - - - - - - - - - - - - - - - - - - 0.,0.9 - - - - - - 0 - - - - - - - - - - - - 0.7,0.9 - - - - - - 0 - - - - - - - - - - - - 0.0,0.9 - - - - - - 0 - - - - - - - - - - - - 08.8,800.9 7 - - - - - - 0 - - - - - - - - - - - - 0.,00.9 - - - - - - - - - - - - - - - - - - 0.,700.9 - - - - - - - - - - - - - - - - - - 0.0 7,00.9 - - - - - - - - - - - - - - - - - - 08.,00.9 - - - - - - - - - - - - - - - - - - 0.0 7,00.9 - - - - - - 0 - - - - - - - - - - - - 0. 8,800.9 - - - - - - 0 - - - - - - - - - - - - 0.0 0,00.9 - - - - - - 0 - - - - - - - - - - - - 08.0 0,00.9 0 - - - - - - 0 - - - - - - - - - - - - 0.7,900.9 7 - - - - - - 0 - - - - - - - - - - - - 0 7.,00.9 7 - - - - - - 0 - - - - - - - - - - - - 0 8.0 7,00.9 7 - - - - - - 0 - - - - - - - - - - - - 08.8,00.9 - - - - - - - - - - - - - - - - - - 0 7.,800.9 - - - - - - 0 - - - - - - - - - - - - 0 8. 8,00.9 - - - - - - 0 - - - - - - - - - - - - 0 9.0 0,700.9 - - - - - - 0 - - - - - - - - - - - - 08 7.,00.9 - - - - - - 0 - - - - - - - - - - - - 0 8. 8,700.9 7 - - - - - - 0 - - - - - - - - - - - - 0 9.,00.9 7 - - - - - - 0 - - - - - - - - - - - - 0 0.0,00.9 7 - - - - - - 0 - - - - - - - - - - - - 08 9.,000.9 - - - - - - 70 0 0.,800.9 7 - - - 0 0 - - - 70 0. 9,00.9 7 - - - 0 0 - - - 70 0.,00.9 7 - - - 0 0 - - - 70 70 08. 8,00.9 7 7 - - - 0 0 - - - 7 80 0.,000.9 - - - 0 - - - 77 80 0. 7,000.9 - - - 0 - - - 77 80 0.0,00.9 - - - 0 - - - 8 90 08.0,00.9 - - - 0 0 - - - 97 00 0.8 7,00.9 - - - 0 0 - - - 0 0 0 8.,700.9 - - - 0 0 - - - 0 0 0 0.0 8,00.9 - - - 0 0 - - - 09 0 08 8.8,00.9 0 0.0 7,700.9 8 0 0 0 0.0 78,00.9 8 0 0 0 0.0 8,00.9 8 0 0 0 0 08. 7,900.9 7 7 0 0 0 0 0. 8,000.9 0 0 0 0 0 7. 9,000.9 0 0 0 0 0 0.0 0,00.9 0 0 0 7 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F. old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. HACR type circuit breaker or fuse. CXM / Page
ELECTRIC HEAT DATA - CXM-00 THREE PHASE 8 kw lbs. 0 kw lbs. kw lbs. 0 kw 9 lbs. kw 9 lbs. Model Number EC9-8 (8K) Terminal block EC9-0 (8K) EC9-0 (8K7) () 0A Fuses EC9-C (8K) 0A breaker EC9- (8K8) () A Fuses EC9-0C (8K) () A breaker EC9-0 (8K9) () A Fuses EC9-0 (8K) () A Fuses EC9-C (8K) () A breaker EC9- (8K0) () 0A Fuses EC9- (8K) () A Fuses No. of Stages Input NOTE includes the lower Motor Full Load Amps. Electric heater capacity only - does not include additional blower motor heat capacity. Amps shown are for blower motor only. lower Motor Full Load Amps 7 Volts kw tuh Ckt Ckt Ckt Ckt Single Point Power Source 08.0 0,00.9 - - - - - - - - - - - - 0.7,900.9 9 - - - 0 - - - - - - - - - 0 7.,00.9 9 - - - 0 - - - - - - - - - 0 8.0 7,00.9 9 - - - 0 - - - - - - - - - 08 7.,00.9 0 - - - 0 - - - - - - - - - 0 8. 8,700.9 - - - - - - - - - - - - 0 9.,00.9 - - - - - - - - - - - - 0 0.0,00.9 - - - - - - - - - - - - 0 8. 8,700.9 7 - - - 0 - - - - - - - - - 0 9.,00.9 7 - - - 0 - - - - - - - - - 80 0.0,00.9 7 - - - 0 - - - - - - - - - 08. 8,00.9 - - - - - - - - - - - - 0.,000.9 0 - - - 0 - - - - - - - - - 0. 7,000.9 0 - - - 0 - - - - - - - - - 0.0,00.9 0 - - - 0 - - - - - - - - - 0.,000.9 - - - - - - - - - - - - 0.8 7,000.9 - - - - - - - - - - - - 80.0,00.9 - - - - - - - - - - - - 08.0,00.9 0 0 0 8 0 0.8 7,00.9 70 0 8.,700.9 70 0 0.0 8,00.9 70 0.8 7,00.9 - - - - - - - - - - - - 0 8.,700.9 - - - - - - - - - - - - 80 0.0 8,00.9 - - - - - - - - - - - - 0.8 7,00.9 - - - 0 - - - - - - - - - 7 8.,700.9 - - - 0 - - - - - - - - - 00 0.0 8,00.9 - - - 0 - - - - - - - - - 08 8.8,00.9 7 7 0 0 7 80 0.0 7,700.9 0 77 80 0.0 78,00.9 0 77 80 0.0 8,00.9 0 80 80 0.0 7,700.9 0 - - - - - - - - - - - - 0.0 78,00.9 0 - - - - - - - - - - - - 80.0 8,00.9 0 - - - - - - - - - - - - 0.0 7,700.9 - - - - - - - - - - - - 7.0 78,00.9 - - - - - - - - - - - - 00.0 8,00.9 - - - - - - - - - - - - Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 7 F (7 C). old text indicates that the circuit breaker on C circuit breaker models must be replaced with size noted. See Table on Page. All 7v electric heaters are used with 0V air handler units. A 7V to 0V Step-down transformer for the air handler unit is furnished with all 7V electric heaters. lower motor is rated at 0V. 7 HACR type circuit breaker or fuse. CXM / Page
DIMENSIONS - INCHES (MM) / (9) / (9) -/ (8) D VOLTAGE INLETS (Top and Left Side) TOP VIEW SUPPLY AIR OPENING / (9) LOW VOLTAGE INLETS (Top and Right Side) -/8 (9) SUCTION () -/8 (7) LIQUID -/ (70) UPFLOW POSITION DETAIL OF PIPING PLATE -/ () -/8 () -/ (89) CONDENSATE DRAINS () (Horizontal) CONDENSATE DRAINS () (Upflow and Downflow) /8 C Model No. A C D E F G H CXM-08/0 in. -/ -/ 0-/8 -/ 9 -/8 0-/8 AIR FLOW G OPTIONAL ELECTRIC HEAT (Field Installed) LOWER mm 9 7 8 8 CXM-00 in. 9-/ -/ 0-/8 9-/ 9 0 -/8 -/8 mm 0 0 8 08 CXM-0 in. -/ -/8 9-/ 0 -/8 -/8 A mm 9 0 7 0 08 70 /8 PIPING PLATE Return Air F FRONT VIEW /8 H FILTER ACCESS SUCTION LIQUID FILTER () COIL Return Air E SIDE VIEW /8 DOWNFLOW POSITION /8 CXM-0 in. -/ -/ -/8 9-/ 0 7-7/8 -/8 CXM-08 CXM-00 E /8 F RETURN AIR OPENING mm 0 7 0 08 708 in. 8-/ -/ -/8 9-/ 0 7-7/8 0-/8 mm 8 0 0 8 08 708 778 /8 -/8 (9) SUCTION () -/8 (9) LIQUID DETAIL OF PIPING PLATE -/8 () CONDENSATE DRAINS () (Horizontal) CONDENSATE DRAINS () (Upflow and Downflow) Model No. A C D E F G H CXM-08/0 in. -/ -/ 0-/8 -/ 9 -/8 0-/8 mm 9 7 8 8 () TOP VIEW () -/ () -/ (89) CXM-00 in. 9-/ -/ 0-/8 9-/ 9 0 -/8 -/8 mm 0 0 8 08 FILTER ACCESS C CXM-0 in. -/ -/8 9-/ 0 -/8 -/8 mm 9 0 7 0 08 70 CXM-0 in. -/ -/ -/8 9-/ 0 7-7/8 -/8 mm 0 7 0 08 708 PIPING PLATE H FILTER SUCTION COIL CXM-08 CXM-00 in. 8-/ -/ -/8 9-/ 0 7-7/8 0-/8 mm 8 0 0 8 08 708 778 AIR FLOW G A LIQUID OPTIONAL ELECTRIC HEAT (Field Installed) LOW VOLTAGE (Right Side) VOLTAGE (Left Side) LOWER / (9) Supply Air D FRONT VIEW / (9) /8 Supply Air -/ (8) SIDE VIEW /8 CXM / Page
DIMENSIONS - INCHES (MM) DETAIL OF PIPING PLATE HORIZONTAL POSITION (RIGHT-HAND AIR DISCHARGE) -/8 (7) () LIQUID FILTER SUCTION -/8 (9) COIL LOWER C -/ CONDENSATE DRAINS () (Upflow and Downflow) /8 -/ () -/ (8) -/8 () CONDENSATE DRAINS () (Horizontal) LIQUID SUCTION H TOP VIEW A OPTIONAL ELECTRIC HEAT (Field Installed) G /8 VOLTAGE INLETS (Top and Right Side) -/ (8) / (9) / (9) E /8 F RETURN AIR OPENING () PIPING PLATE AIR FLOW SUPPLY AIR OPENING D /8 END VIEW FILTER ACCESS FRONT VIEW LOW VOLTAGE INLETS (ottom and Right Side) END VIEW / (9) HORIZONTAL POSITION (LEFT-HAND AIR DISCHARGE) FILTER DETAIL OF PIPING PLATE C LOWER COIL -/8 () -/8 (9) OPTIONAL ELECTRIC HEAT (Field Installed) TOP VIEW SUCTION LIQUID SUCTION LIQUID () -/8 (7) / (9) / (9) -/ (8) LOW VOLTAGE INLETS (Top and Left Side) /8 G A H /8 D SUPPLY AIR OPENING AIR FLOW PIPING PLATE FILTER ACCESS CONDENSATE DRAINS () (Horizontal) () E RETURN AIR OPENING F /8 / (9) END VIEW VOLTAGE INLETS (ottom and Left Side) FRONT VIEW -/ () -/ -/ (8) /8 END VIEW Model No. A C D E F G H inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm CXM-08/0 -/ 9 -/ 0-/8 -/ 7 9 8 8 -/8 0-/8 CXM-00 9-/ -/ 0 0-/8 9-/ 0 9 8 0 08 -/8 -/8 CXM-0 9 -/ 0 -/8 7 9-/ 0 0 08 -/8 70 -/8 CXM-0 -/ -/ 0 -/8 7 9-/ 0 0 08 7-7/8 708 -/8 CXM-08 CXM-00 8-/ 8 -/ 0 -/8 9-/ 0 8 0 08 7-7/8 708 0-/8 778 CXM / Page 7
DIMENSIONS - INCHES (MM) AIR FLOW PIPING PLATE AIR FLOW AIR FLOW PIPING PLATE A /8 RIGHT HAND AIR FLOW /8 /8 A LEFT HAND AIR FLOW AIR FLOW A Model No. A in. mm in. mm CXM-08/0 -/ 9 -/ PIPING PLATE A CXM-00 9-/ -/ 0 CXM-0 9 -/ 0 CXM-0 -/ -/ 0 AIR FLOW PIPING PLATE CXM-08 CXM-00 8-/ 8 -/ 0 UP-FLOW DOWN-FLOW /8 SIDE RETURN UNIT STAND (Upflow Only) (0) () CXM-08/0 -/ () CXM-00 thru -00 -/ (0) ADJUSTALE 0 (08) to () ALL UNITS CXM / Page 8
DIMENSIONS - INCHES (MM) DOWNFLOW COMUSTILE FLOORING ASE AIR HANDLER -/8 () Catalog No. - J7 -/8 (89) SUPPLY AIR OPENING (8) 8-/ () -/8 () DOWNFLOW COMUSTILE FLOORING ASE TOP VIEW /8 A -/8 (0) Opening SIDE VIEW () Catalog No. - K -/8 () -/8 () 0 (08) TOP VIEW -/8 (89) -/ (9) reak Off Extended Width At Pre-perforated Line To Fit Specific Air Handler eing Installed. Note: Allow For An Additional Two Inch ( mm) Overhang For Air Handler Positioning Adjustment. /8 () SUPPLY AIR OPENING /8 -/8 (0) Opening SIDE VIEW () C Model No. -08, -0, -00-0, -0-08, -00 in. mm in. mm in. mm A -/8 - - - - - - - - - - - - - - - - - - -/8 - - - - - - C - - - - - - - - - - - - -/8 CXM / Page 9
REVISIONS Sections Electric Heat Data Description of Change New catalog numbers for electric heat models. Removed EvenHeater electric heat models (see Price ook for information). Visit us at www.lennox.com For the latest technical information, www.lennoxdavenet.com Contact us at -800--LENNOX NOTE - Due to Lennox ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency. 0 Lennox Industries, Inc.