MR98 Series Backpressure Regulators, Relief and Differential Relief valves

MR98 Series Instruction Manual January 2015 MR98 Series Backpressure Regulators, Relief and Differential Relief valves P1757 TyPe MR98L P1753 TyPe MR98H D103588X012 Figure 1. Typical MR98 Series Backpressure Regulators, Relief and Differential Relief Valves www.fisherregulators.com

Available Constructions Type MR98L: Type MR98H: Type MR98HH: Type MR98LD: Type MR98HD: Type MR98HHD: 1/4 NPT: 1/2 in. / DN 15: 3/4 and 1 in. / DN 20 and 25: 1-1/2 and 2 in. / DN 40 and 50: Maximum Spring Case Loading Pressure for Types MR98LD, MR98HD and MR98HHD (Spring Setting Plus Loading Pressure) (1)(2) Type MR98LD Spring Case Gray Cast Iron: Steel or Stainless steel: Type MR98HD Spring Case Gray Cast Iron: Steel or Stainless steel: Type MR98HHD Spring Case Steel or Stainless steel: Maximum Inlet and Outlet Pressure Rating and Materials (1)(2) BODy SIze In. DN C v C g C 1 - - - - 15 120 250 780 BODy SIze In. DN X T F d F L K m - - - - 15 Set Pressure Ranges See Table 3 Pressure Registration Metal Seats: Class IV Class IV elastomer Seats: Class VI or better Temperature Capabilities for elastomer Parts (1)(3) See Table 5 Temperature Capabilities for Metal Parts (1)(3) See Table 5 Approximate Weights MR98H Series: 1/4 NPT: 1/2 in. / DN 15: 3/4 and 1 in. / DN 20 and 25: 1-1/2 and 2 in. / DN 40 and 50: MR98L Series: 1/4 NPT: 1/2 in. / DN 15: 3/4 and 1 in. / DN 20 and 25: 2

! WARNINg Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion, causing property damage and personal injury or death. Fisher backpressure regulators, relief and differential relief valves must be installed, operated and maintained in accordance with federal, state and local codes, rules and regulations and emerson Process Management Regulator Technologies, Inc. (emerson ) instructions. If a leak develops or if the outlet continually vents gas, service to the unit may be required. Failure to correct install or service the unit. Installation, operation and maintenance person may result in improper adjustment and unsafe operation. either condition may result in equipment damage or when installing, operating and maintaining the MR98 Series backpressure regulators, relief and differential relief valves. Product Description Type MR98L Type MR98H Type MR98HH Type MR98LD Type MR98HD Type MR98HHD Introduction Scope of the Manual 3

ADjuSTINg SCReW CONTROL SPRINg vent DIAPHRAgM valve PLug ORIFICe CONTROL LINe TAP TyPe MR98H WITH INTeRNAL PReSSuRe RegISTRATION INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE BACK view OF 1/2 IN. / DN 15 TyPe MR98H WITH external PReSSuRe RegISTRATION SIDe AND INTeRNAL view OF 3/4 TO 2 IN. / DN 20 TO 50 TyPe MR98H WITH external PReSSuRe RegISTRATION (ALSO TyPICAL OF TyPe MR98L, 1/2 TO 2 IN. / DN 15 TO 50 BODIeS) MeTAL DIAPHRAgMS SPRINg MeTAL DIAPHRAgM SPRINg gasket gasket FOR TyPe MR98H WITH TWO MeTAL DIAPHRAgMS (ALSO TyPICAL OF TyPeS MR98HH AND MR98L except FOR psi / 0.1 TO 0.48 bar RANge) psi / 0.14 TO 0.48 bar RANge) WITH ONe MeTAL DIAPHRAgM Figure 2. MR98 Series Operational Schematics

HANDWHeeL CONTROL SPRINg DIAPHRAgM LOADINg PReSSuRe INLeT TAP valve PLug ORIFICe CONTROL LINe TAP INLET PRESSURE OUTLET PRESSURE LOADING PRESSURE TyPe MR98HD WITH INTeRNAL PReSSuRe RegISTRATION TyPe MR98HD WITH external PReSSuRe RegISTRATION SPRINg MeTAL DIAPHRAgMS gasket Principle of Operation FOR TyPeS MR98HD, MR98HHD AND MR98LD WITH TWO MeTAL DIAPHRAgMS, ASSeMBLe DIAPHRAgM gaskets under AND ABOve THe MeTAL DIAPHRAgMS AS SHOWN ABOve Figure 2. MR98 Series Operational Schematics (continued) 5

Table 1. Types MR98L and MR98LD Regulators Body Constructions BODy MATeRIAL BODy SIze BODy CONSTRuCTION end CONNeCTION STyLe gray Cast Iron WCC or LCC Steel CF8M Stainless Steel (1) CF3M Stainless Steel (1) Monel or Hastelloy C (1) Monel Hastelloy

Table 2. Types MR98H, MR98HD, MR98HH and MR98HHD Regulators Body Constructions BODy MATeRIAL BODy SIze BODy CONSTRuCTION end CONNeCTION STyLe gray Cast Iron (2) WCC or LCC Steel CF8M Stainless Steel (1) CF3MStainless Steel (1) Monel or Hastelloy C (1) - continued - Monel Hastelloy 7

Table 2. Types MR98H, MR98HD, MR98HH and MR98HHD Regulators Body Constructions (continued) BODy MATeRIAL BODy SIze BODy CONSTRuCTION end CONNeCTION STyLe gray Cast Iron WCC or LCC Steel CF8M Stainless Steel (1) CF3M Stainless Steel (1) Monel or Hastelloy C (1) Monel Hastelloy 8

TyPe MR98H MR98HD MR98HH MR98HHD BODy SIze Table 3. MR98 Series Body Sizes, Pressure Ranges and Spring Information CONTROL PReSSuRe RANge (1) SPRINg WIRe DIAMeTeR SPRINg FRee LeNgTH In. DN psig bar In. mm In. mm - - - - 15 25 25 - - - - 15 25 25 SPRINg MATeRIAL SPRINg PART NuMBeR SPRINg COLOR 2 to 7 1E392527022 12 to 25 20 to 38 2 to 7 12 to 25 20 to 38 2 to 7 102 1E398927022 102 12 to 25 102 20 to 38 2 to 7 102 1E3989X0052 Stainless steel 12 to 25 102 Stainless steel 15 to 35 1E392527022 25 to 75 130 to 200 15 to 35 25 to 75 130 to 200 15 to 35 102 1E398927022 25 to 75 102 102 130 to 200 15 to 35 102 1E3989X0052 25 to 75 Stainless steel 102 Stainless steel 5 to 35 1E792327092 50 to 100 75 to 170 1P7888X0022 - - - - 150 to 375 105 15 150 to 375 129 20 150 to 375 9

LOADINg PReSSuRe HIgH PReSSuRe ReLIeF OuTLeT AND OPTIONAL PIPINg TO SySTeM uncontrolled LOW PReSSuRe CONTROLLeD HIgH PReSSuRe PuMP TyPe MR98HD LOW PReSSuRe (FOR LOADINg) CONTROLLeD HIgH PReSSuRe TyPe MR98LD Figure 3. Installation Schematics for Types MR98LD and MR98HD Relief Valves 10

Installation! WARNINg Personal injury or system damage may result if this backpressure regulator, relief or differential relief valve is installed where service conditions could exceed the limits given on regulator nameplate. Additionally, physical damage to the backpressure regulator or relief valve may result in personal injury or property damage due to escaping of accumulated gas. To avoid such injury and damage, install the backpressure regulator or relief valve in a safe location. under enclosed conditions or indoors, escaping gas may accumulate and be an should be piped outdoors. For regulator constructions with a spring case vent, the vent should be to the atmosphere. Protect openings against entrance of rain, snow, insects or any other foreign material that may plug the spring case vent or vent line. Overpressure Protection! WARNINg Overpressuring any portion of this equipment may result in equipment damage, leaks in the relief valve/ backpressure regulator or personal injury due to bursting of pressurecontaining parts. vents and Relief valve Outlet! WARNINg If using an MR98 Series backpressure regulator, relief or differential relief valve personal injury and property damage vented gas that may have accumulated. To prevent such injury or damage, provide piping or tubing to vent the gas to a safe, well-ventilated area. All vents should be kept open to permit free openings against entrance of rain, snow, insects or any other foreign material that may plug the vent or vent line. 11

ReguLATOR TyPe MR98H MR98HD MR98HH MR98HHD BODy SIze Table 4. Maximum Cold Working Pressures of Body Size and Materials (1)(2) BODy AND SPRINg CASe MATeRIALS Steel Stainless steel Monel Hastelloy C Steel Stainless steel Monel Hastelloy C Steel Stainless steel Monel Hastelloy C Steel Stainless steel Monel Hastelloy C Steel Stainless steel Monel Hastelloy C Steel Stainless steel Monel Hastelloy C MAXIMuM INLeT PReSSuRe (3) MAXIMuM OuTLeT PReSSuRe MAXIMuM SPRINg CASe PReSSuRe psig bar psig bar psig bar 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 50 125 125 125 125 50 125 125 125 125 250 250 MATeRIAL Stainless steel or Hastelloy C Table 5. Temperature Capabilities (1)(2) TeMPeRATuRe RANge BODy SIze SPRINg CASe BOLTS (1) ORIFICe valve PLug guide BOTTOM PLug In. DN Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs - - - - 15 10 to 13 8 to 11 13 to 18 Table 6. Torque Specifications 180 to 200 Hastelloy Monel 8 to 11 70 to 90 85 to 100 125 to 150 50 to 58 75 to 90 100 to 125 170 to 200 102 to 122 230 to 271 12

Startup Note show the maximum inlet and the constructions. use pressure gauges to monitor inlet pressure, outlet pressure and any loading pressure during startup. Adjustment Types MR98L, MR98H and MR98HH Types MR98LD, MR98HD and MR98HHD Shutdown Relief valve Differential valve (Pressure-Loaded System)! WARNINg To avoid damage of internal parts from a pressure-loaded actuator, carefully vent the regulator spring case pressure prior to inlet pressure. 13

BODy SIze TyPe SPRINg RANge DIAPHRAgM MATeRIAL NuMBeR OF DIAPHRAgM 1 2 2 Metal 1 Metal 2 1 2 2 MR98HHD Metal 2 Table 7. Number of Diaphragms Required 1 2 2 Metal 2 Backpressure Regulator Maintenance! WARNINg To avoid personal injury, property damage or equipment damage caused by sudden release of pressure or explosion of accumulated gas, do not attempt any maintenance or disassembly or regulator from system pressure and relieving all internal pressure from the relief valve or regulator. To avoid possible personal injury from spring or pressure-loaded actuator, make sure that the adjusting screw is completely backed off or the spring case pressure is vented prior to disassembly. Otherwise, the spring load or loading pressure could forcefully eject the spring case. Relief valves or regulators that have been disassembled for repair must be tested for proper operation before being returned to service. Only parts manufactured by emerson should be used for repairing Fisher relief valves and regulators. Due to normal wear or damage that may occur from external sources, this relief valve or backpressure regulator should be inspected and maintained periodically. The frequency of inspection and replacement of parts depends upon the severity of service conditions or the requirement of local, state and federal rules and regulations. Flange Cap Screw Torque Inspection

Disassembly to Replace Diaphragm and Seats CAuTION Metal diaphragms have thin sharp edges. To avoid hand cuts, be careful when handling the diaphragm, particularly the diaphragm edge. For Types MR98LD, MR98HD and MR98HHD: For Types MR98L, MR98H and MR98HH: Note If a metal diaphragm is to be replaced by an elastomer diaphragm or an elastomer diaphragm by a metal diaphragm, a new pusher post is required. each diaphragm material requires a different pusher post length and make sure the proper number of metal or elastomer diaphragm that will be used is followed. Refer to the Parts number of diaphragm to be used. 15

Replacement or Maintenance of Bottom Plug O-ring Disassembly to Replace Packing (For Types MR98LD, MR98HD and MR98HHD) Parts Ordering Note In this parts list, parts marked NACe are intended for corrosion-resistant service as detailed in the NACe International Optional materials are available to please contact your local Sales Office for special ordering instructions.

Parts List Key Description Part Number Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Monel Hastelloy Key Description Part Number Hastelloy Hastelloy Hastelloy Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel 17

Key Description Part Number Key Description Part Number Hastelloy Monel Steel Stainless steel 1P7877X0012 Steel Steel Steel Steel Stainless steel Steel 1E398725072 1E3987X0012 Steel Steel Steel 10 Pusher Post Monel Hastelloy Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel Hastelloy Monel See Table 3 18

Key Description Part Number Key Description Part Number Monel Hastelloy 19

Key Description Part Number Hastelloy Monel Hastelloy Hastelloy Hastelloy Hastelloy Hastelloy 25 Seat Retainer Hastelloy Key Description Part Number Monel Hastelloy 20

Key Description Part Number Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD Key Description Part Number Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD Type MR98HHD 21

Key Description Part Number Type MR98HHD Type MR98HHD Key Description Part Number 51 Vent Type MR98HH Type MR98H Hastelloy Monel Hastelloy Monel Monel Hastelloy 22

Key Description Part Number Hastelloy Monel Key Description Part Number Monel Hastelloy 23

BODy SIze end CONNeCTION STyLe gray Cast Iron WCC Steel LCC Steel BODy MATeRIAL CF8M Stainless Steel (1) CF3M Stainless Monel (1) Hastelloy C (1) Steel (1) - - - - - - - - - - - - - - - - - - - - - - Key 1, Types MR98L and MR98LD Body Part Numbers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - continued - Monel Hastelloy

BODy SIze Key 1, Types MR98H, MR98HD, MR98HH and MR98HHD Body Part Numbers (continued) end CONNeCTION STyLe gray Cast Iron (2) WCC Steel LCC Steel CF8M Stainless Steel (1) BODy MATeRIAL CF3M Aluminum- Stainless Monel (1) Hastelloy C (1) Steel (1) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - continued - Monel Hastelloy 25

BODy SIze end CONNeCTION STyLe gray Cast Iron WCC Steel LCC Steel BODy MATeRIAL CF8M Stainless Steel (1) CF3M Aluminum- Stainless Monel (1) Hastelloy C (1) Steel (1) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Key 1, Types MR98H and MR98HD Body Part Numbers (continued) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Monel Hastelloy

Key 2, Spring Case Part Numbers TyPe BODy SIze STyLe In. DN gray Cast Iron WCC Steel LCC Steel - - - - 15 SPRINg CASe MATeRIAL CF8M Stainless Steel Monel Hastelloy C (Standard) ERCA02874A0 (1) ERCA02874A3 (1) (1) - - - - - - - - - - - - - - - - - - - - - - ERAA01872A2 (1) ERAA01872A3 (1) (1) - - - - - - - - - - - - - - - - - - - - - - (Standard) ERCA02883A0 (1) ERCA02883A3 (1) (1) - - - - - - - - - - - - - - - - - - - - - - ERAA01885A0 (1) ERAA01885A4 (1) (1) (1) (1) (Standard) ERCA02908A0 (1) ERCA02908A3 (1) (1) - - - - - - - - - - - - - - - - - - - - - - ERCA00621A2 (1) ERCA00621A6 (1) (1) (1) (1) - - - - (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MR98H - - - - 15 (Standard) (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - (Standard) ERCA02881A0 (1) ERCA02881A3 (1) (1) - - - - - - - - - - - - - - - - - - - - - - (1) (1) (1) (1) (1) (Standard) (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) - - - - (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MR98HD MR98HH MR98HHD 15 (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Standard) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - 15 - - - - - - - - - - - (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (1) (1) (1) - - - - - - - - - - - - - - - - - - - - - - - - - - (Standard) - - - - - - - - - - - ERCA01358A0 ERCA01358A3 ERCA01358A2 - - - - - - - - - - - - - - - - - - - - - - 15 (Standard) - - - - - - - - - - - ERCA01381A0 ERCA01381A3 ERCA01381A2 - - - - - - - - - - - - - - - - - - - - - - (Standard) - - - - - - - - - - - ERCA01360A0 ERCA01360A3 ERCA01360A2 - - - - - - - - - - - - - - - - - - - - - - Key 4*, Valve Plug, Metal Seat BODy SIze valve PLug MATeRIAL BODy STyLe In. DN (1) (1) Hastelloy C (1) Monel (1) - - - - - - - - - - - - - - - 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Monel Hastelloy 27

Key 4*, Valve Plug, Composition Seat BODy SIze valve PLug MATeRIAL BODy STyLe In. DN (1)(2) Hastelloy C (1) - - - - - - - - - - - - - - - 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Key 12* Composition Diaphragm, NACE TyPe BODy SIze In. DN Neoprene (CR) DIAPHRAgM MATeRIAL Fluorocarbon (FKM) (2 required) epdm (2 required) - - - - 15 - - - - 15 Key 12* Metal Diaphragm TyPe BODy SIze In. DN 302 Stainless Steel BODy MATeRIAL (2 RequIReD) 302 Stainless Steel (Oxygen Service) Monel Hastelloy C - - - - 15 - - - - MR98H 15 - - - - - - - - - - - - - - - 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MR98HD 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MR98HH 15 - - - - - - - - - - - - - - - MR98HHD 15 - - - - - - - - - - - - - - - - - - - - - - Monel Hastelloy 28

15 17 50 22 2 9 10 11 SEALED ADJUSTING SCREW OPTION TEE-HANDLE OPTION 31 21 28 (2) 12 16 8 59 25 24 T 29 58 COMPOSITE SEAT OPTION 4 7 1 3 L1 63 OR (3) L4 52 53 5 CONTROL LINE OPTION 13 18 64 18 19 METAL DIAPHRAGM OPTION APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L4 = graphite SeALANT FOR graphite RINg Figure 4. Type MR98L Assembly 29

44 38 41 34 35 L3 36 39 40 43 18 13 42 37 L1 32 33 2 9 10 11 31 18 64 28 45 L1 T 24 59 8 21 16 (2) 25 12 1 COMPOSITE SEAT OPTION 58 29 4 7 4 3 L1 63 OR (3) 5 L4 52 53 L1 CONTROL LINE OPTION 29 19 12 19 SEE DETAIL A DETAIL B 29 29 SEE DETAIL B 19 DETAIL A 19 METAL DIAPHRAGM OPTION APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L3 = SILICONe grease L4 = graphite SeALANT FOR graphite RINg Figure 5. Type MR98LD Assembly 30

15 17 50 2 22 9 SEALED ADJUSTING SCREW OPTION TEE-HANDLE OPTION 10 11 28 4 (2) 16 31 8 12 1 52 53 L1 58 29 CONTROL LINE OPTION 7 4 3 59 L1 OR (3) 63 5 L4 T 24 25 COMPOSITE SEAT OPTION 18 13 12 19 METAL DIAPHRAGM OPTION 18 64 APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L4 = graphite SeALANT FOR graphite RINg Figure 6. Type MR98H Assembly with 1/4 NPT to 1 in. / DN 25 Body Sizes 31

15 17 2 9 50 22 11 10 SEALED ADJUSTING SCREW OPTION TEE - HANDLE OPTION 31 51 28 8 52 53 L1 L1 45 16 12 (2) 4 21 1 CONTROL LINE OPTION 3 24 T 4 59 25 5 63 L1 OR (3) COMPOSITE SEAT OPTION L4 29 12 19 18 13 METAL DIAPHRAGM OPTION 18 64 APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L4 = graphite SeALANT FOR graphite RINg Figure 7. Type MR98H Assembly with 1-1/2 to 2 in. / DN 40 to 50 Body Sizes 32

44 41 34 38 39 35 42 32 36 L3 40 43 37 L1 13 18 33 9 64 18 2 11 31 10 28 8 59 25 (2) 16 12 45 24 T 58 1 COMPOSITE SEAT OPTION 7 29 3 4 5 L1 OR (3) 63 52 53 L1 L4 CONTROL LINE OPTION 29 12 19 29 SEE DETAIL B SEE DETAIL A 19 DETAIL B DETAIL A METAL DIAPHRAGM OPTION APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L3 = SILICONe grease L4 = graphite SeALANT FOR graphite RINg Figure 8. Type MR98HD Assembly with 1/4 NPT to 1 in. / DN 25 Body Sizes 33

41 38 44 L3 35 36 43 34 39 40 32 42 18 13 L1 37 33 2 9 11 10 31 28 8 L1 45 21 3 16 (2) 12 1 4 5 29 63 L1 OR (3) L4 18 64 24 T 52 53 L1 12 19 59 19 25 4 METAL DIAPHRAGM OPTION COMPOSITE SEAT OPTION CONTROL LINE OPTION APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS L3 = SILICONe grease = ANTI - SeIze COMPOuND L4 = graphite SeALANT FOR graphite RINg Figure 9. Type MR98HD Assembly with 1-1/2 to 2 in. / DN 40 to 50 Body Sizes

15 17 13 9 18 2 51 10 11 28 51 (2) 16 31 12 8 58 1 SEE NOTE 4 68 29 7 4 3 L1 OR (3) 63 5 18 64 L4 59 4 T 24 25 52 53 L1 12 19 COMPOSITE SEAT OPTION CONTROL LINE OPTION METAL DIAPHRAGM OPTION APPLy (1) : T = THReAD LOCKeR L1 = general PuRPOSe PTFe OR LITHIuM grease FOR O-RINgS = ANTI - SeIze COMPOuND L4 = graphite SeALANT FOR graphite RINg Figure 10. Type MR98HH Assembly with 1/4 NPT to 1 in. / DN 25 Body Sizes 35

Industrial Regulators emerson Process Management Regulator Technologies, Inc. Europe Natural gas Technologies emerson Process Management Regulator Technologies, Inc. Europe TeSCOM emerson Process Management Tescom Corporation Europe The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or products at any time without notice.