New HydroMassage Model Highlights: New HydroMassage Models More powerful massage than previous models Enhanced components for 24-hour usage New color options with LED lighting and Introduction of the HydroMassage Lounge A combination of both the HydroMassage Beds and Lounges reaches a larger percentage of members. Similar to tanning, some members prefer the lie-down models, and others will choose the upright models. Members prefer the traditional lay-down Bed models when they want to close their eyes and fully relax. Lounge models are the best fit for members who prefer a more social experience or need a quick massage on the run while using their smartphone. With the upright position, members are more comfortable in an open area. The Lounge models are recommended for prospective member trials at the end of new club tours. They may be positioned in the premium package entrance to attract more attention and get more upgrades New HydroMassage 440 / 450 Lounge 2015 HydroMassage 340 / 350 Bed New models are now available for shipment. Ask about discounts on multiple units per club.
HydroMassage Zone Layouts- Lounges HydroMassage Room for Three lounge Models: 19 x 10 or larger HydroMassage room with three Lounges and a glass door is recommended. Black, Silver, and Red Lounge Models Shown HydroMassage Room for Two Lounge Models: 12 x 10 or larger HydroMassage room with two Lounges, a 3.5 divider, and windows on either side of the door is recommended. 10 x 9 room possible but not recommended. Semi-Private Room for One Lounge Model: 8 x 10 or larger HydroMassage room with one Lounge (or Bed model) and a 4 glass door. Recommend installing window into room if glass door is not an option.
HydroMassage Zone Layouts- Beds HydroMassage Room for Three Bed Models: 30 x 10 or larger HydroMassage room with three Beds, two 5 open entryways, and optional 2 x 7 windows. HydroMassage Room for Two Bed Models: 20 x 10 or larger HydroMassage room with two Bed models, an 8 open entryway, and optional 2 x 7 windows. Semi-Private Room for One Bed Model: 8 x 10 or larger HydroMassage room with one Bed model and a 4 glass door. Recommend installing window into room if glass door is not an option.
HydroMassage Bed and Lounge Layouts HydroMassage Room for Four Lounge and Bed Models: 30 x 10 or larger HydroMassage room with two Lounges, two Beds, and one large 11 entryway or two 5 and open entryways. Optional 4 x4 window. HydroMassage Room for Five Lounge and Bed Models: 20 x 24 space with five units. 10 or larger entrance into first room with Lounges, 4 entrance into HydroMassage Bed area, and 6 entrance into area with other amenities
HydroMassage Bed and Lounge Layouts HydroMassage Room for Seven Lounge and Bed Models: 30 x 24 space with seven units. 10 or larger entrance into first room with Lounges, 8 entrance into room with Beds, and 6 entrance into area with other amenities
HydroMassage Electrical Requirements Technical Specifications MODEL IMAGE SPES WEIGHT WATER VOLTAGE PHASE Amps 440 / 450 285 lbs 20 gallons 80 L x 32 208-240 30 Series empty. 445 distilled Single W x 43 H Volts Amp Lounge with lbs water water 340 / 350 Series Bed Electrical Requirements 91 L x 39 W x 26 H 260 lbs empty. 500 with lbs water 30 gallons distilled water 208-240 Volts Series 300-400 Models *these items are required for EAH HydroMassage unit Single A: 208-240 Volt, single-phase, dedicated line with a 30 Amp dedicated breaker and 10 gauge wire (2 hot legs and a ground*). Install 6 above the floor. A on diagram o 30 Amp, 250 volt NEMA L6-30R Locking Receptacle (three prong plug). B: 110 Volt outlet. Install 6 above floor. B on diagram : AT-5 or AT-6 terminated network jack (able to connect to front desk P). on diagram 30 Amp NEMA L6-30R Locking Receptacle Electrical Wiring Diagrams A 6 B 6 X Y G Top down view of Bed (not to scale) Top down view of Lounge (not to scale) Head End Head End 12 B 12 A 6 Foot End Foot End Unique set of items A, B, required FOR EAH HydroMassage unit (i.e. must install additional sets if a second or third unit is to be installed in the same room). If necessary, location of outlets above may be moved within +/- 5. all 1-800-699-1008 for details. Water Requirements Distilled water required. Distilled water is available major supermarkets or directly from your water supplier (if you have a water delivery service).
HydroMassage HVA Requirements Minimum HVA Requirements* (for installation in private room). 300 FM HVA supply and return per HydroMassage unit (i.e. 900 FM for room with 3 units). Additional FM may be necessary if room is normally warm. Optimal HVA Set-up 300 FM HVA supply and return per HydroMassage unit One 200-300 FM exhaust fan above room, with 2 vents to remove heat No doors at entrance of room Thermostat installed in room When the above HVA requirements can t be met, an external cooling system is REQUIRED to eliminate overheating risk when HydroMassage is installed in a private room HydroMassage External ooling System ITEM # IMAGE SPES WEIGHT ELETRIAL FIN-0140 34.5 L x 15.5 W x 10.5 H 81 lbs Supplied from HydroMassage Unit Room Design for External ooling System ooling System onnection to HydroMassage: Supplied with power cord and two ¼ water lines (requires 5 of clearance see picture) Proximity: May be installed up to 20 away from the HydroMassage unit (room above, below, or adjacent to massage room) Installation in eiling: When installed above room (suspended as an air handler), two ¾ conduits are required for the water lines and electrical cord; terminating at single gang boxes near the back of the HydroMassage unit. Include pull strings in the conduits. HydroMassage technicians are not permitted to install the cooling system above the room. Utilize a licensed general contractor. 5 + learance Required *IMPORTANT: The external cooling system will vibrate slightly while in use. If the cooling system is installed on a platform above the room, it is necessary to secure it to the platform to prevent it from moving and potentially falling (ex. adding a lip around the perimeter of the platform, using straps to secure the cooling system, etc). Please call the HydroMassage Technical Support department at 1-800-699-1008 x 1013 with any questions.
Regulating HydroMassage Usage Recommended Method: HydroMassage Desktop Software Requirements: One AT5 cable connecting unit to front desk computer (or network room). ost is a $119 software charge per club. Overview: Staff activates HydroMassage from a small window in the corner of the front desk computer. When idle, a message box on the Touchscreen instructs members to see the front desk to use HydroMassage. This feature also provides access to HydroMassage tech support for upgrades and troubleshooting and generates member usage reports. Best HydroMassage Marketing Practices lubs using the following strategies have observed 30% - 60% membership adoption rates. Monthly package: Include HydroMassage (10-minutes per day) in a premium membership package, and combine HydroMassage with two or three other premium amenities (ex. guest passes, tanning, etc). Room Layout: reate a HydroMassage Zone with two or more units and a waiting area. Key HydroMassage Zone features: 1. Semi-private room with open entryways (4 or larger) 2. Location in a high traffic area of the club to maximize visibility 3. Relaxing, spa-like atmosphere 4. Small waiting area with a two chairs for members before their massage. HydroMassage Usage Rates HydroMassage Units Massages Per Month Sales Emphasis: Focus 75% of sales efforts on new monthly members. When possible, give prospective members a 1-3 minute sample massage during the initial club tour. Other strategies: 1) Include Free Massage offers in advertising campaigns to drive new guest traffic, 2) include HydroMassage with personal training packages, and 3) display at HydroMassage in each new club s presale location. 3 2 1 Up to 4,242 / mo month Up to 2,908 per month Up to 943 per month lick to hear how a club owner converts 7 of 10 members for massage packages