markilux 8800 / 8800

VERTICL BLINDS ND CONSERVTORY WNINGS safe timeless beautiful markilux 8800 / 8800 Form follows function the timelessly modern conservatory awning with contrasting shapes designed down to the last detail optionally with tracfix system rated to wind resistance class 3 (corresponds to Beaufort 6) www.markilux.com markilux

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS side view face fixture awning pitch from 5 side view fixture to a conservatory side view wall sealing profile (optional) up to a maximum awning pitch of front profile closes completely flush with the guide tracks the maintenance cover at each end of the cassette aids quick installation when the awning is retracted, the cover is fully protected within the cassette coupled unit 2 fields units with tracfix (optional) have no gap between the cover and the guide track; when completely exten ded the front pro - file finishes flush with the end of guide tracks Design Features Technical Specification Optional ccessories the round cassette and angular guide tracks harmonise perfectly with one another and with the shapes found in contemporary conservatory design when fully extended the rounded front profile sits flush with the end of the guide tracks, giving the system a completely closed appearance when retracted the cover is protected from the weather by the cassette, which encloses it completely for long-lasting attractiveness the awning has been powder coated exterior solar shading so the heat does not get into the conservatory in the first place by virtue of the especially sturdy construction areas of up to 36m² can be covered safely by one unit with a single cover permanently high cover tension is achieved by way of two special gas-piston mechanisms operating independently of one another motor with electronic cut-off mechanism to prevent overheating and damage if the awning is obstructed. (Not in the case of a radio-controlled motor) brackets with patented clip-on mechanism for simple, problem free installation radio-controlled motor with remote control for comfortable operation, markilux remote control with ergonomic design wall sealing profile to cover the gap between awning and wall tracfix system attractive, completely closed appearance with no annoying gap between the blind cover and the tracks. When completely extended the front profile finishes flush with the end of the guide tracks to simplify fixture, a broad selection of brackets is available awning available in non-standard RL colours 180 Special features www.markilux.com

markilux 8800 / 8800 tracfix VERTIC L BLINDS ND CONSERVTORY WNINGS Dimensions and configuration options 1 74 1 0 1 0 2 1 2 300 251 300 3 301 3 400 351 400 01 02 min. 4 401 4 0 1 0 5 1 5 0 551 0 61) 1 6 7001) 651 700 433 04 1 0 05 2 300 70 [67] [77] 3 03 4002) 42) 02) 52) 02) 62) 7002) 1) depending on the fixture combination, an additional central cassette support is required from a fixture width of 1 cm, and a central support for any cover support tube from a fixture width of 1 cm 09 dimensions in cm the case of tracfix 1 cover support tube 2 cover support tubes standard optional hard-wired motor 13 Frame colours standard 12 tracfix (optional) Operation / Drive unit 07 08 [ ] dimensions in 2) from an extension of 401 cm, an additional track bracket per track is required 06 optional traffic white RL 90 radio-controlled motor (433 z) metallic aluminium RL 9006 silentec anthracite metallic RL 54 17 io radio-controlled motor grey brown, similar to RL 80 18 non-standard powder-coated finish Covers fabric range no. standard optional sunsilk snc 324 xx / 328 xx / 369 xx sunvas snc 3 xx / 3 xx 313 xx 3 xx sunsilk perla FR 374 xx transolair 338 xx perfotex 332 xx sunvas perla 370 xx slightly from those depicted in both hue and finish. 4) 3) not available in tracfix units 4) only available in tracfix units; from a fixture width of 1 cm, maximum extension 4 cm hard-wired motor 433 radio-controlled motor (433 z) fixture width / order width in. minimum widths www.markilux.com 4) 3) Colours similar to those in the RL chart. Colours may differ extension Dimensions and configuration options 181

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Coupled units standard optional dditional information The width of the awning cover is always less than that of the awning. 2 fields 3 fields Dimensions and tolerances width extension Fixture / order width definition: The fixture/order width is the measurement from track centre to track centre i.e. from fixture point to fixture point on the conservatory. The overall width of the awning is 0 mm greater than the fixture width. The fixture width tolerance is + 0 mm / mm. housing tolerances awning cover width fixture width blind cover length extension + 5 / mm 90 1) mm ± 0 mm Definition of the extension / order extension: The extension is measured with the awning extended from the back of the cassette to the leading edge of the front profile. The tolerance in the extension is + 40 / 40 mm. 1) dimensions for tracfix units on request Definition of operating side: the operating side is always given as if seen from the outside (right or left). iscellaneous standard optional In cases of face fixture the awning can be set at a pitch of between 5 and. Track-only mounted awnings can be set at pitches of up to 90. wall sealing profile 2) tracfix light and wind sensor 2) up to a maximum awning pitch of Units which are to run uphill are available upon request. N.B! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating. N.B! In contrast to standard motors, radio-controlled motors have no safety cut-out mechanism if the front profile is obstructed. If this function is desired in combination with radio-controlled operation, order the hard-wired motor with an external radio receiver and an appropriate transmitter. In the case of a bank of awnings operating simultaneously, the same speed of rotation of the motors cannot be guaranteed because of the internal tolerances of the motors. The rate of extension of a single unit with hard-wired motor is approximately seconds per metre. Depending on the size of the awning, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the awning. 182 Coupled units / Dimensions and tolerances / iscellaneous / dditional information www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Dimensions and configuration options Coupled unit, 2 fields, 1 or 2 motors Coupled unit, 3 fields, 2 motors 0 0 700 800 900 00 10 1300 00 401 0 1 0 1 700 701 800 801 900 overall width + 1 0 2 300 3 901 00 01 10 1300 1301 00 400 4 0 5 0 6 700 0 700 800 900 00 10 1300 00 1700 1800 00 00 00 551 0 1 700 701 800 801 900 901 00 01 10 1300 overall width + 1 0 2 300 3 1301 00 01 1700 1701 1800 dimensions in cm 1801 00 01 00 01 00 400 4 0 2) 5 0 6 1) 700 01 02 03 04 05 06 07 08 09 12 13 17 18 1 cover support tube 2 cover support tubes 1) 2 cover support tubes; possible up to a max. fixture width of cm 2) 2 cover support tubes; possible up to a max. fixture width of cm tracfix (optional) dimensions in cm fixture width / order width extension www.markilux.com Dimensions and configuration options 183

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS dditional information Coupled conservatory awnings are available up to a max. width of 3 single units (3 fields) side by side. In the case of coupled units with 2 or 3 fields and 2 motors unequal running speeds due to tolerances within the motors may occur. In the case of coupled units with fields of differing sizes smooth rolling-up behaviour of the covers cannot be guaranteed. This has no bearing on the functionality of the awning or the durability of the cover. The rate of extension of coupled units with 2 fields, 1 otor and 3 fields, 2 motors is approximately to 18 seconds per metre. In the case of coupled units with 2 fields, 2 motors extension takes as long as with single awnings i.e. approx. 12 to seconds per metre. In the case of 2 motors, the individual motors can be operated independently of one another. For the maximum awning size, please refer to the matrix for single units! The matrices above assume equal field widths in coupled awnings. If a coupled unit of unequal field width is ordered, for which a cover support tube is required on the larger awning, then if only for aesthetic reasons one should also be fitted to the smaller awning (see the matrix for one field). In the case of coupled units up to a fixture width of 700 cm the cassette will be supplied in one piece. If, for transportation or installation reasons, the cassette needs to be split, please note this explicitly when ordering. If coupled awnings are fitted into a recess or reveal the overall width of the coupled awning must be at least 6 cm less than the width of the opening to allow the awning to be coupled. Depending on the size of the awning, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the awning. Fixtures, fittings and accessories Cassette fixture brackets face fixture bracket left pitch adjustment range from 5 face fixture bracket right pitch adjustment range from 5 cassette coupling bracket face fixture central pitch adjustment range from 5 763. 764. 76181. face fixture bracket, wide, left pitch adjustment range from 5 face fixture bracket, wide, right pitch adjustment range from 5 top fixture bracket pitch adjustment range from 5 76231. 76232. 77058. 126 40 bottom fixture bracket for track-only fixture left 126 40 bottom fixture bracket for track-only fixture right coupling bracket for the cassette for track-only fixture bottom fixture coupling point 761. 762. 76180.. insert RL colour code no. 184 dditional information coupled units / Fixtures, fittings and accessories www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixtures, fittings and accessories Cassette fixture brackets 227527 767. raised cassette bracket foot can be tilted backwards by up to, head of cassette fixture bracket can be tilted forwards by up to left, for track-only fixture 227527 768. raised cassette bracket foot can be tilted backwards by up to, head of cassette fixture bracket can be tilted forwards by up to right, for track-only fixture 227527 768. raised cassette bracket foot can be tilted backwards by up to, head of cassette fixture bracket can be tilted forwards by up to for coupling point bottom fixture 01 02 03 04 05 0 132 cassette / housing support for track-only fixture height 0 mm 0 132 cassette / housing support for track-only fixture height 0 mm coupling bracket for the cassette in the case of rigid track-only fixture 06 07 76183. 38 76184. 38 769. fixture types 31 and 32 08 09 ccessories 767. storm safety bracket for the cassette (recommended in windy locations and as an additional safety measure for the cassette) 29 71790. 34 diagonal tensioning kit (2 wire tensioners, 1 tensioning wire) 270 7. fixture bracket for light, wind and rain sensor 12 13 77780. wall sealing profile available by the metre for installation example please see Face fixture with wall sealing profile bracket cover support tube 44 30 40 765. angled bracket to prevent deflection of the cover support tube for bracket height 0 mm for installation example see Installation dimensions coupling bracket cover support tube 71780. support bracket to prevent deflection of the cover support tube, can be shortened to between 703 mm (with clamp plate), for installation example see storm safety clip / closing guide 17 18 7. 759. 76235. angled adapter plate for rounded mullions L/R incl. fixture bolts required in addition to fixture combination 32 1 85 Ø9 25 angled adapter plate for rounded mullions without fixture bolts angled adapter plate for rounded mullions coupling point incl. fixture bolts 65 799. 798. 766.. insert RL colour code no. www.markilux.com Fixtures, fittings and accessories 185

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Fixtures, fittings and accessories Track brackets 40 9 footprint dimensions of adjustable track bracket 85 track bracket with adjustable head height 0 mm 85 track bracket with adjustable head height 0 mm 1 85 1 9 40 1 9 40 748. track bracket with adjustable foot plate spacer plate track bracket 9 adjustable foot plate for track bracket 85 height 0 mm 1 40 mm 8,5 1 9 1 85 769. 78570. 785. 85 double track bracket with adjustable head universal track bracket track bracket for conservatory transom fixture 1 761. 9 40 height 0 mm 754. height 0 mm 40 9 755. 1 height 0 mm double track bracket with adjustable head track bracket with adjustable head double track bracket with adjustable head 1 85 762. 9 40 height 0 mm 747. height 00 mm 763. height 00 mm universal track bracket track bracket with adjustable head and foot double track bracket with adjustable head and foot height 00 mm height 00 mm height 00 mm 753. 7. 764. vario-v bracket for single track fixture flat track bracket for lateral track fixture with adjustable head fixture plate 1 mm 752. 749. 788. track bracket for track fixture, rigid track bracket for bottom fixture available by the metre undrilled 9 30 track bracket for track-only fixture directly to conservatory mullions ( mm) 70 40 max. length 6 m 1 717. 713. 76735.. insert RL colour code no. 186 Fixtures, fittings and accessories www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixture combinations ll brackets incur a surcharge Fixture combination 761.L 762.R 76180. Fixture combination 12 763.L 764.R 76181. Fixture combination Fixture combination Fixture combination 22 Fixture combination 31 Fixture combination 32 Fixture combination 41 Fixture combination 51 Fixture combination 61 761.L 762.R 76180. 761.L 762.R 76180. 763.L 764.R 76181. 717. 749. 749. 717. 717. 763.L 764.R 76181. 763.L 764.R 76181. 767.L 768.R 768. 752. Fixture combination 71 767.L 768.R 768. 752. 752. an additional cassette support is required from a field width of 01 mm, 76183. from an extension of 4001 mm an additional bracket 717. per guide track is required only up to an extension of 4000 mm from an extension of 4001 mm fixture combination 51 an additional cassette bracket is required from a fixture width of 01 mm, 763. an additional cassette support is required from a field width of 01 mm, 76183. from an extension of 4001 mm an additional bracket per guide track is required an additional cassette support is required from a field width of 01 mm, 76183. from an extension of 4001 mm an additional bracket 749. per guide track is required an additional cassette bracket is required from a fixture width of 01 mm, 763. from an extension of 4001 mm an additional bracket 749. per guide track is required an additional cassette support is required from a field width of 01 mm, 76183. from an extension of 4001 mm an additional bracket 717. per guide track is required an additional cassette support is required from a field width of 01 mm, 76183. from an extension of 4001 mm an additional bracket per guide track is required an additional cassette bracket is required from a fixture width of 01 mm, 763. from an extension of 4001 mm an additional bracket 752. per guide track is required up to an extension of 4000 mm, fixture type 12 an additional cassette bracket is required from a fixture width of 01 mm, 763. an additional cassette bracket is required from a fixture width of 01 mm, 767. from an extension of 4001 mm, fixture type 81 an additional cassette bracket is required from a fixture width of 01 mm, 767. from an extension of 4001 mm an additional bracket 752. per guide track is required diagonal tensioners are recommended 01 02 03 04 05 06 07 08 09 12 13 17 18 Fixture combination 81 767.L 768.R 768. 752. up to an extension of 4000 mm, fixture type 61 an additional cassette bracket is required from a fixture width of 01 mm, 767. diagonal tensioners are recommended Individual bracket combinations see Fixtures, fittings and accessories. Please note the minimum quantity required for the width and unit height you intend to order! www.markilux.com Fixture combinations 187

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Single unit 1 field, 1 motor asymmetrical guide track lengths B B 300 B 300 B B 300 185 1 + DIF B DIF Coupled unit 2 fields, 1 motor B B B 300 B 300 B 1 185 6 B B B DIF overall awning width + 0 mm extension width between fixture points bracket fixture range difference in measurement [ ] awning width between fixture points fixture width order width dimensions of the cover gap in a standard unit, no cover gap in units with tracfix system motor 188 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Coupled unit, 2 fields, 2 motors B B B 300 B 300 B 1 01 02 03 04 05 06 185 07 08 09 6 B Coupled unit, 2 fields, 2 motors, asymmetrical extensions B B B 300 B 1 B 300 12 13 17 1 185 2 18 6 B 1 2 B overall awning width extension long extension short extension bracket fixture range B [ ] width between fixture points awning width between fixture points fixture width order width dimensions of the cover gap in a standard unit, no cover gap in units with tracfix system motor www.markilux.com 189

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Coupled unit, 3 fields, 2 motors B B B B 300 B 1 B 1 B 300 185 6 6 B Detailed illustration of guide tracks BT BT K B overall awning width coupled unit extension width between fixture points motor BT [ ] B track bracket with adjustable head mullion / fixture substrate dimensions of the cover gap in a standard unit, no cover gap in units with tracfix system bracket fixture range awning width between fixture points fixture width order width 0 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixture combination, bottom fixture 01 02 0 03 8 187 84 5 37 04 05 70 761. 762. 76183. 6 S - 717. min. 0 30 06 07 08 09 B 12 Fixture combination, bottom fixture 13 0 8 187 84 5 37 761. 762. 76183. 6 S - min. 0 17 18 30 B 762. 76180. S overall awning width extension width between fixture points bottom cassette fixture bracket, right coupling bracket for bottom cassette fixture in cross section 761. 717. B bottom fixture cassette bracket, left, from a fixture width of 01 mm an additional housing support is required, 76183. awning width between fixture points fixture width order width track bracket for track-only fixture, rigid up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track track bracket, with adjustable head, 0 mm up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track www.markilux.com 1

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Fixture combination, for track-only fixture (from a field width of 01 mm an additional housing support is required in the centre) 5 761. 762. 76183. 749. max.67 S - max.67 min.46 min.46 V1 max.73 max.73 min.36 min.36 V2 min.17 min.17 max. max. V3 overall awning width extension B width between fixture points awning width between fixture points fixture width order width S in cross section 761. bottom fixture bracket, an additional cassette support is required from a field width of 01 mm, 76183. 762. bottom cassette fixture bracket, right 76180. coupling bracket for bottom cassette fixture 717. rigid track bracket for track-only fixture, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track track bracket with adjustable head 0 mm, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track 2 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixture type 12, face fixture for extensions up to 4000 mm, from an extension of 4001 mm fixture type 51 W X 5 26 32 37 43 25 47 30 35 52 40 53 53 4 187 X 0 Fixture type 22, face fixture with lateral flat track bracket W X 5 26 32 37 43 25 47 30 35 52 40 53 53 W 70 3 187 84 X 763. 764. 76181. W B S X 76181. pitch overall awning width extension width between fixture points in cross section distance from cassette to wall cassette coupling bracket, face fixture awning width between fixture points fixture width order width W 0 5 6 763. 764. 76181. 84 B S - B S - 749. 37 min. 0 30 37 min. 0 763. face fixture bracket, left, from a fixture width of 01 mm an additional face fixture bracket is required, 764. 764. face fixture bracket, right, from a fixture width of 01 mm an additional face fixture bracket is required, 764. track bracket with adjustable head 0 mm, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, fixture type 51 749. flat bracket for lateral track fixture with adjustable head, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track max. 385 01 02 03 04 05 06 07 08 09 12 13 17 18 www.markilux.com 3

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Fixture combination 31, for track-only fixture (from a field width of 01 mm an additional housing support is required in the centre) 0 187 84 5 37 717. min. 300 max. 400 S - min. 0 6 717. 30 70 B Fixture combination 32, for track-only fixture (from a field width of 01 mm an additional housing support is required in the centre) 0 8 187 84 5 37 min. 300 max. 400 6 S - min. 0 30 70 B B S width between fixture points overall awning width extension awning width between fixture points fixture width order width in cross section 717. rigid track bracket for track-only fixture, up to an extension of 4000 mm, 2 per track, from an extension of 4001 mm, 3 per track track bracket with adjustable head 0 mm, up to an extension of 4000 mm, 2 per track, from an extension of 4001 mm, 3 per track 4 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixture type 41, face fixture with vario-v brackets 01 02 W X 5 26 32 37 43 25 47 30 35 52 40 53 53 3 187 X W 0 0 258 37 03 04 05 06 763. 764. 76181. 6 S - min. 300 min. 5 max. 300 07 08 09 70 752. 30 B 12 Fixture type 51, face fixture for extensions greater than 4000 mm, up to an extension of 4000 mm fixture type 12 13 W X 5 26 32 37 43 25 47 30 35 52 40 53 53 3 187 X W 0 763. 764. 76181. 258 37 17 18 S - min. 0 W pitch X distance from cassette to wall overall awning width 6 extension B width between fixture points 30 S in cross section awning width between fixture points B fixture width order width track bracket with adjustable head 0 mm, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track 752. vario-v brackets for lateral track fixture, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track 763. face fixture bracket, left, from a fixture width of 01 mm an additional face fixture bracket is required, 764. 764. face fixture bracket, right, from a fixture width of 01 mm an additional face fixture bracket is required, 764. 76181. cassette coupling bracket, face fixture www.markilux.com 5

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Fixture combination 32 with angled adapter plate for rounded mullions incl. fixture bolts (799.) 228 187 228 187 min. 0 min. 0 min. 300 max. 400 min. 300 max. 400 799. 799. 5 125 5 125 min. 0 V1 V2 V3 125 799. 799. 125 5 70 125 5 125 31 BC 31 69 BC 69 75 25 125 125 V2 799. 5 70 766. 125 V3 5 70 799. 5 70 799. 25 25 overall awning width 31 69 awning fixture width BC order width 69 75 BC 75 - in cross section BC awning width between fixture points extension 799. angled adapter plate for rounded mullions incl. fixture bolts V1, V2 xx. variation 1, 2 xx. 5 70 766. 6 www.markilux.com

228 187 VERTICL BLINDS ND CONSERVTORY WNINGS min. 0 markilux 8800 / 8800 tracfix Detailed illustrations of variations 1, 2 and 3 (V1, V2 and V3) 125 29 6 31 BC 69 BC ~ 31 BC 31 125 min. 300 max. 400 V1 ~ 29 6 75 BC V1 V2 V3 ~ 29 6 799. 799. 799. 799. 125 766. 69 5 125 V2 BC 5 70 01 02 03 04 05 06 07 08 09 12 13 17 18 1 85 Ø9 25 angled adapter plate for rounded mullions without fixture bolts angled adapter plate for rounded mullions incl. fixture bolts required in addition to fixture combination 32 angled adapter plate for rounded mullions coupling point incl. fixture bolts 65 798. 799. 766. www.markilux.com 7

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Fixture type 61, raised bottom cassette fixture 187 0 max. 4 37 B S B min. 0 min. 235 max. 535 767. 768. 768. B B Fixture type 71, raised bottom fixture with vario-v brackets 187 0 max. 4 37 258 S min. 400 max. 800 min. 235 max. 535 767. 768. 768. overall awning width extension B width between fixture points S in cross section B B awning width between fixture points fixture width order width track bracket with adjustable head 0 mm, up to an extension of 4000 mm, from an extension of 4001 mm fixture type 81 752. vario-v brackets for lateral track fixture, up to an extension of 4000 mm, 1 per track, from an extension of 4001 mm, 2 per track 767. raised cassette fixture bracket, left, an additional cassette bracket is required from a fixture width of 01 mm, 768. 768. raised cassette fixture bracket, right, an additional cassette bracket is required from a fixture width of 01 mm, 768. 768. raised cassette bracket, coupling point 8 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Fixture type 81, raised bottom cassette fixture for awnings with an extension greater than 4000 mm using vario-v brackets 187 B 4 min. 225 max. 535 Raised bottom fixture using cassette coupling bracket 0 767. B 768. 752. 258 S -B B 5 37 min. 0 768. 768. 01 02 03 04 05 06 07 08 09 12 13 17 18 overall awning width extension B width between fixture points S in cross section awning width between fixture points fixture width order width track bracket, with adjustable head, 0 mm 752. vario-v bracket, for track fixture 767. raised cassette fixture bracket, left, an additional cassette bracket is required from a fixture width of 01 mm, 768. 768. raised cassette fixture bracket, right, an additional cassette bracket is required from a fixture width of 01 mm, 768. 768. raised cassette bracket, coupling point www.markilux.com 9

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS Diagonal tensioning kit for raised bottom fixture 71790. 71790. 71790. 71790. 7. 7. 7. 71790. 71790. 71790. 71790. B Face fixture using cassette coupling bracket B easurement from the back of the cassette to the leading edge of the front profile 0 EG G 187 86 70 287 1 76181. EG G B 7. 76181. 76790. overall awning width width between fixture points awning width between fixture points fixture width order width track bracket with adjustable head and foot 0 mm to 0 mm cassette coupling bracket, face fixture diagonal tensioning kit EG G awning retracted awning extended 0 www.markilux.com

VERTICL BLINDS ND CONSERVTORY WNINGS markilux 8800 / 8800 tracfix Support bracket to prevent deflection of the cover support tube (0 mm) Support bracket to prevent deflection of the cover support tube, can be shortened to between 70 mm and 3 mm - 765. 6,5 7. 759. 48 765. 48 71780.,8 40 min. 70 B B 70 71,5 30 max. 3 7. 759. 61 min. 131 5 max. 381 01 02 03 04 05 06 07 08 09 12 13 17 18 B-B 6,4 12 12 6,6 71780. 7. 759. 765. support to prevent deflection of the cover support tube, can be shortened to between 70 mm and 3 mm (with clamp plate) bracket for cover support tube coupling bracket for cover support tube angled support bracket, 0 mm www.markilux.com 1

markilux 8800 / 8800 tracfix VERTICL BLINDS ND CONSERVTORY WNINGS double track bracket B 0 B B 300 T B 300 T 761. 762. 763. 764. 5 5 5 to 5 5 to 5 Cable exit point in the case of motor-driven units 180 26 8 130 58 B T B 761. 762. 763. 764. overall awning width width between fixture points awning width between fixture points fixture width order width fixture bracket fixture bracket height bracket fixture range (cassette brackets) double track bracket with adjustable head double track bracket with adjustable head double track bracket with adjustable head double track bracket with adjustable head and foot 2 / Cable exit point www.markilux.com