AQUA PRODUCTS MODEL G. Cleaners B-17 ASSORTED AQUA PRODUCTS CLEANERS

Size: px

Start display at page:

Download "AQUA PRODUCTS MODEL G. Cleaners B-17 ASSORTED AQUA PRODUCTS CLEANERS"

Ashley Bond
5 years ago
Views:

1 Cleaners B-17 DESCRIPTIONS OF THESE ITEMS ARE ON THE NEXT 4 PAGES 99A MODEL G

2 Cleaners B-18 Edited HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr A10000B HANDLE ASSY. (Blue & White, Bracket included) - Ultramax A HANDLE ASSY. (Blue & White, Bracket included) - Aquamax, Aquabot Ultra A HANDLE ASSY. (Blue & White, Bracket included) - AB Ultra, AMAX Biturbo, UMAX Jr A HANDLE ASSY. (Green & Black, Bracket not included) - Merlin A BRACKET FOR HANDLE (Black) - Merlin 5088BK 2 OBSOLETE OBSOLETE BRACKET FOR HANDLE (Blue) - all units except Merlin S1100B CLEVIS PIN (Flat Head, hole in end) - Secure Handle inside Side Plate of Merlin CLEVIS PIN (Round Head, hole in end) - Secure Handle inside most Handle Brackets WASHER (St.Steel) - Use to secure Handle Assy. inside most Handle Brackets COTTER RING (Aluminum, 3/16 ) - Secure Handle Pin inside Side Plate of all units SCREW (10-32, 7/8, Phil Pan Head) - For securing the Handle Bracket to the Body Assembly SCREW (#8, 11/16, Phil Pan Head) - To secure Handle Bracket to top of Outer Shell in Ultramax units SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket P-CLIP (1/4, Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body P-CLIP (5/16, Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body P-CLIP (7/16, Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy P-CLIP (11/16, Plastic) - For securing the foam-insulated part of a 9-wire cable to the Handle P-CLIP (3/8, Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body replace nla P-CLIP (1/2, Plastic) rep w/ P-CLIP (5/8, Plastic) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy P-CLIP (5/8, St.Steel) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy P-CLIP (5/8, Coated Steel) - For securing the insulated part of a 4,7,9-wire cable to the Handle P-CLIP (11/16, St.Steel) - For securing the foam-insulated part of a 9-wire cable to the Handle P-CLIP (9/16, Plastic) - For securing the Heat Shrink part of the 2-wire cable to the Handle Assy SCREWS (#8, 11/16, Phil Pan-Flat Head) - To secure a P-Clip whenever the hole is deep SCREWS (#6, 7/16, Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow PLUG (3-Pin, Female, 2-Wire) - Aquabot, AB Turbo, AMAX Jr HT/+, AMAX, Merlin PLUG (4-Pin, Female, 4-Wire) - AB Turbo Solo, AB Turbo RC, AMAX Jr+RC PLUG (7-Pin, Female, 7-Wire) - Aquamax Biturbo RC PLUG (9-Pin, Female, 9-Wire) - Ultramax Jr, Ultramax PLUG (7-Pin, Male, 7-Wire) - Aquabot Plus RC, Aquabot Ultra 1640E EZ-SWIVEL (Blue, Plastic, Small) - For detangling the 2-wire Cable Assembly S EZ-SWIVEL (Blue, Plastic, Large) - For detangling the 4 or 7-wire Cable Assembly S CABLE ASSY. (2-Wire, 100 Foot, Floating) - Aquamax Junior Plus A CABLE ASSY. (7-Wire, 120 Foot, Floating) - Aquamax Biturbo RC A CABLE ASSY. (7-Wire, 75 Foot, Floating) - Aquabot Plus RC, Aquabot Ultra A CABLE ASSY. (4-Wire, 120 Foot, Floating) - Aquamax Biturbo A CABLE ASSY. (9-Wire, 120 Foot, Floating) - Ultramax Junior, Ultramax A CABLE ASSY. (9-Wire, 150 Foot, Floating) - Ultramax Junior, Ultramax A CABLE ASSY. (4-Wire, 75 Foot, Floating) - Aquabot Turbo Solo, Aquabot Turbo RC A CABLE ASSY. (2-Wire, 51 Foot, Floating) - Aquabot A CABLE ASSY. (2-Wire, 60 Foot, Floating) - AB Turbo, AMAX Jr HT, Merlin A CABLE ASSY. (2-Wire, 75 Foot, Floating) - Aquabot Plus, Aquamax Jr HT A1675F CABLE ASSY. (2-Wire, 120 Foot, Floating) - Aquamax A FLOAT BALL (Blue & White, Large) - For Large Cable with Rope Assembly FLOAT BALL (Light Blue, Small) - For OLD Cable Assembly with Float Balls KEY FLOAT (Lock for Float Ball) - For OLD Cable Assembly with Float Balls OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo 2230B OUTLET TOP (Top, Bottom, & Cap) - For all units with an Outer Shell like the Ultramax 2240B OUTLET TOP (Black, Flat Circle) - Merlin 5093BK BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot A BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - Ultramax (only 1/2 of unit) A22000NOHOLE BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AB Turbo RC/Solo A22000-W2H BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - ABOT+RC A22000XH BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquamax A BODY ASSY. (White, w/ all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AMAX Biturbo A22201MBT BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - Ultramax Jr A22201MJR BODY ASSY. (White, w/ all Holes, Lock Tabs, Outlet Bottom, Inserts) - Aquabot Ultra A22201UB BODY ASSY. (Yellow, with all Holes, Lock Tabs, Pin, Inserts) - Merlin A5091

3 Cleaners B SCREWS (18-8, 6/32 x 5/8, Phil Pan Head) - To secure the Outlet Top on the Merlin ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Anti-Roll Brackets SCREW (M-5, Phil Bev Head) - To secure the Anti-Roll Brackets to the Body Assembly LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base (set of 2) 9204BL WIRE RETAINER CLIP (OLD, Pre-shaped Wire) - Use w/ Locking Plate to secure Bottom Lid SCREWS (18-8, 8/32 x 1/2, Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly DRAIN VALVE FLAPS (OLD, Rubber) - For use to cover the large holes at corners of old units SIDE PLATE (Blue, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr B SIDE PLATE (Black, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr BK 45 REPLACE NLA SIDE PLATE (White, no holes) REP W/ W SIDE PLATE (Black) - Merlin 5095BK SIDE PLATE (Blue, 4 holes for Bolts) - Aquamax, Aquamax Biturbo, AMAX Jr S3400B-4H SIDE PLATE (Blue, 6 holes, 4 for Bolts, 2 for DM access) - AB+RC, AB Ultra, UMAX units S3400B-6H SIDE PLATE (Blue, 8 holes, 4 for Bolts, 4 for Piston Clamps) - Aquabot Turbo Solo / RC S3400B-8H SIDE PLATE (Black, 6 holes, 4 for Bolts, 2 for DMaccess) - AB+RC, AB Ultra, UMAX units S3400BK-6H SIDE PLATE (shallow, 1 large hole for cables, 4 small holes for Bolts) - Ultramax S3400W SIDE PLATE (White, 4 holes for Bolts) - Aquamax, Aquamax Biturbo S3400W-4H C RING GUARD (Green) - For Merlin Side Plate 5096G BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies BUSHING (OLD, small sleeve) - For the end of older Pulley Assemblies like A BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body s Pin Support SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body s Pin Support STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg DRIVE BELTS (Tan) PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors A PULLEY ASSEMBLY (Medium) - For most Commercial Units with Black Drive Motors A PULLEY ASSEMBLY (Long, OLD) *** See Drive Motor Spacer Bracket A PUMP MOTOR - Aquabot A6001A PUMP MOTOR - Aquabot Turbo, Aquamax Jr HT A6001T PUMP MOTOR - Aquabot Plus RC, AB Ultra, AMAX Jr+, Aquamax, AMAX BT, Ultramax A6010U PUMP MOTOR - Merlin A PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft SCREW (8-18, 3/4, Phil No-head) - For securing Pump Motors to the Body Outlet Top DRIVE MOTOR (White, Terminal Basin) - Aquabot A4510A DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Aquamax Junior HT A4510T DRIVE MOTOR (GTSP, White, Terminal Basin) - ABOT Turbo) ** only when specified by AP A DRIVE MOTOR (White, Terminal Basin) - Aquamax Junior Plus A DRIVE MOTOR (Black, bare wire leads) - AMAX, AMAX Biturbo, AMAX RC, AMAX BT RC A8517MBT DRIVE MOTOR (Black, BB Liquid Air Sensor, bare wire leads) - All AMAX units with A.S. A DRIVE MOTOR (Master/Black, Standard) - Ultramax Junior, Ultramax A8523SL DRIVE MOTOR (Master/Black, BB Liquid Air Sensor) - Ultramax Jr, Ultramax A8524BBSL DRIVE MOTOR (Master/Black) - Aquabot Plus RC, Aquabot Ultra A8526SL DRIVE MOTOR (Black, bare wire leads) - Merlin A SPIRAL PIN (3/4, solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors SCREW (5/8 ) - For sealing the Terminal Cover onto the Basin of all White Drive Motors WHEEL TUBE ASSY (Aquabot, Merlin) ** does not use retaining rings A WHEEL TUBE ASSY (Aquamax, Aquamax Biturbo) A WHEEL TUBE ASSY (Aquamax, Aquamax Biturbo) - Model G A38001MG WHEEL TUBE ASSY (Ultramax) A WHEEL TUBE ASSY (Ultramax) - Model G A38200MG WHEEL TUBE ASSY (Aquabot Ultra, Ultramax Junior) A WHEEL TUBE ASSY (Aquabot Ultra, Ultramax Junior) - Model G A38201MG WHEEL TUBE ASSY (Aquabot Plus RC) A38203

4 Cleaners B-20 Edited WHEEL TUBE ASSY (Aquabot Plus RC) - Model G A38203MG WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr Plus) A WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model G A38205MG RETAINING RING (E-Clip) - New Style REPLACE NLA RETAINING RING (C-Clip) - Old Style Rep W/ WASHER (Nylon, Flat) - For each end of the Wheel Tube BRUSHES (Light Blue PVA Foam, long) - Aquamax, Aquamax Biturbo BRUSHES (Light Blue PVA Foam) - Aquabot, AB Turbo, AMAX Jr, Merlin, Ultramax BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Ultramax 3002B BRUSHES (Blue Molded Rubber, long, cut in half) - Aquabot Ultra, Ultramax Junior 3002B BRUSHES (Blue Molded Rubber, cut in half) - Aquabot Plus RC 3002B4S BRUSHES (Blue Molded Rubber, long) - Aquamax, Aquamax Biturbo 3002BM BRUSHES (Black Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin Ultramax 3003B BRUSHES (Black Molded Rubber, cut in half) - Aquabot Plus RC 3003BL BRUSHES (Black Molded Rubber, long) - Aquamax, Aquamax Biturbo 3003M BRUSHES (Light Blue PVA Foam) - Aquabot Ultra, Ultramax Junior 3008A BRUSHES (Light Blue PVA Foam) - Aquabot Plus RC 3009A BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin A BRUSHES (Black Sponge Foam) - Aquamax, Aquamax Biturbo A REPLACE NLA DRIVE TRACK (Black) REP W/ DRIVE TRACK (Blue) A DRIVE TRACK with TRACTION TABS (Blue) - For all Model G units MODEL G SPACER BRACKETS ** necessary with Model G Drive Tracks FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Ultramax FILTER BAG (Fine) - AB Ultra, Aquamax, Aquamax Biturbo FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Ultramax FILTER BAG (Mesh) - AB Ultra, Aquamax, Aquamax Biturbo, PHV 100/ FILTER BAG CLIP (Black, Short) - AB, AB Turbo, AB+RC, AMAX Jr, Ultrmax FILTER BAG CLIP (Black, Long) - AB Ultra, Aquamax, Aquamax Biturbo FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, Ultramax FILTER SCREEN (White, Cage) - AB Ultra, Aquamax, Aquamax Biturbo FILTER SCREEN (Plastic, Mesh) - Bravo, Merlin A5080S SCREW (#6, 11/16, Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot A9200X BOTTOM LID ASSY. (Mint Green, W-shaped Wire Frame) - Merlin A9200XMG BOTTOM LID ASSY. (White, Square Wire Frame) - AB Ultra, Aquamax, Aquamax Biturbo A9201XC INTAKE VALVE FLAP (Black PVC Rubber) - AMAX, AMAX Biturbo, AB Ultra INTAKE VALVE FLAP (Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX 9305B-B INTAKE VALVE FLAP (Black PVC Rubber) - ABOT, AB Turbo, AMXJr, UMAX A OBSOLETE OBSOLETE LOCKING PLATE ASSY. (OLD, White, Plastic, w/ Spring, Screw, Washers) H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb S SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them POWER SUPPLY (3-Prong, Male Socket, 7hr External Dial Timer) - Aquabot Turbo POWER SUPPLY (3-Prong, Male Socket) - Aquabot A POWER SUPPLY (3-Prong, Male Socket) - Aquabot Plus A POWER SUPPLY ASSY. Merlin POWER SUPPLY (3-Prong, Male Socket) - Aquamax Jr HT, Aquamax Jr Plus, Aquamax A POWER SUPPLY (7-Pin, Male Socket, Wired RC) - Aquamax Biturbo RC A POWER SUPPLY (4-Pin, Male Socket) - Aquamax Biturbo A POWER SUPPLY (9-Pin, Male Socket, Radio RC) - All Ultramax units A POWER SUPPLY (OLD, 4-Pin Male, 7hr Internal Timer, Wired RC) - AB Turbo Solo / RC A POWER SUPPLY (7-Pin, Female Socket, Radio RC) - Aquabot Plus RC, Aquabot Ultra A POWER SUPPLY (4-Prong, Male Socket) - Aquamax Jr Plus RC A POWER SUPPLY (OLD, 7-Pin, Female Socket, Wired RC) - Aquabot Plus RC, Ultrabot A POWER SUPPLY (RARE, 7-Pin, Female Socket, Radio RC) - Aquabot Plus RC, Aquabot Ultra A POWER SUPPLY (4-Pin Male, 7hr External Dial Timer, Radio RC) - AB Turbo Solo / RC A SOCKET ASSY. (3-Pin, Male, 2-Wire) - ABOT, AB Turbo, JET unit s, AMAX Jr, AMAX) SOCKET ASSY. (4-Pin, Male, 4-Wire) - AB Turbo Solo, AB Turbo RC, Aquamax Biturbo) SOCKET ASSY. (7-Pin, Male, 7-Wire) - Aquabot + RC, Aquabot Ultra, All AMAX RC units 7136

5 Cleaners B SOCKET ASSY. (9-Pin, Male, 9-Wire) - Ultramax Jr, Ultramax SOCKET ASSY. (7-Pin, Female, 7-Wire) - Aquabot Plus RC, Aquabot Ultra 7149E FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply 7106 * SCREW (Small, Pair) - AB+RC, AB Ultra, Umax Jr, have a brace to secure to the Body 1109 * SPACER (2-1/8, PVC, White) - For in between Body Assemblies on the Ultramax 2019 * INFRA RED SENSOR (Aquamax Jr Plus, Aquamax, Aquamax Biturbo) 2209 * NAIL PLUG (White, Plastic) - Use to plug small holes on the Body used for Anti-Roll Brackets 2400 * WASHER (White, 5/8 od, Nylon) - Use when Pin Support Bushing is shallow to take up space 2602 * CLIMBING RINGS (Light Blue PVA, 1 thick) - Use on any unit, fitted over Rubber Brushes ** 3007 * SCREW (Bolts, Long) - Aquabot Plus RC, AB Ultra, AMAX, AMAX BT, UMAX Jr, UMAX 3401 * WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts 3607 * SPRING (Aluminum) - Two are used under the Handle Bracket of the Merlin and Bravo 5087 * FUSE (5.0 Amp, 250 Volt, Slow-Blow) - AB+RC, ABOT Ultra, all AMAX, all UMAX, all PHV 7002 * FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo 7101 * ***SPACER BRACKET (w/ hardware) - Use when Dr. Motor Legs are too short for Pulley A * SCREW (Bolts, Extra-Long) - Ultramax - To secure Bodies together through center Side plates 8307 * SCREW (3-1/4, Phil Pan Head, Long) - For in between Body Assemblies on the Ultramax 8323 * PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors * MAIN DRAIN BUMPER - For use on any Pool s main drain where a unit gets stuck * INSERT (Black, Cylinder, Long) - Insert in Handle through from inside the Side Plate of the Merlin 5084LBK * RECEIVER (OLD, Radio, 4-Way) - AB+RC, AB Ultra, UMAX **must use A Transmitter A * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 2 Drive conn.) - UMAX Jr IR, UMAX Jr BB IR A2240S * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 Drive connections) - Ultramax, UMAX Beach Boy A2241S * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 Drive connections) - Ultramax Jr, UMAX Jr B.B. A2242S * JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 1 Light, 2 Drive connections) - ABOT Ultra Lumina A2243L * JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 2 Drive connections) - Aquabot Plus RC, AB Ultra A2243S * JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 2 IR, 2 Drive connections) - ABOT Ultra Infra Red A2244S * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 2 Drive connections) - UMAX IR, UMAX BB IR A2245S * JUNCTION BOX ASSY. (2-Wire Cable, 1 Pump, 1 Drive connections) - Aquamax Biturbo A2246S * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 1 AS, 2 Drive conn.) - Ultramax w/ OLD Air Senor A2247S * JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 1 AS, 2 Drive conn.) - UMAX IR w/ OLD A.S. A2248S * ROUND CONNECTOR (OLD 3-Pin Female, Grey 2-wire cable) - Used to replace Pump lead S6101 * NOT SHOWN

PARTS LIST COLT COLT HEPA

PARTS LIST COLT COLT HEPA PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131