International standard flanges acc.to SAE, ISO, DIN, GOST
|
|
- Shanon Poole
- 5 years ago
- Views:
Transcription
1 Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level in whole operating range High operational reliability and service life for operation hours High volumetric efficiency up to 98% Symbol R, L International standard flanges acc.to SAE, ISO, DIN, GOST Technical Data Nominal Size Parameters Symbol Unit Actual displacement V g [cm 3 ],3,, 8,, 1,8 1,,1,,1 31,1 [in 3 ] Rotation speed Pressure at inlet* Pressure at outlet** nominal n n [min -1 ] minimum n min [min -1 ] maximum n max [min -1 ] 8 minimum p 1min [bar] -,3 (-. PSI) maximum p 1max [bar], (7.3 PSI) [bar] 8 max. continuous p n [PSI] [bar] maximum p max [PSI] [bar] peak p 3 [PSI] Nominal flow rate (min.) [l. min -1 ],, 8, 11, 13, 1,, 8,,9 3, 3,71 Q at n n and p n n [GPM] Maximum flow rate [l. min -1 ] 1,8, 3, 8, 3,89,3,18,7 1, 8,,8 Q at n max and p max max [GPM] Nominal input power (max.) at n n and p n P n [kw] 3,33,1,, 8,9 9, 11,8 11,8 1,9 13, 13,7 Maximum input power at n max and p max P max [kw] 8,77 11,8 13,1 1,78 1,3,,1 9, 31,, 1,91 Weight m [kg],,3,,7,8,9 3,1 3,3 3, 3, 3,8 [lbs] ) * pressure in the reversible design can be up to p 1 = p n -7 bar max. External drainage must be used in case of the reversible design. ) ** pressure in the reversible design is % lower than shown in the table (depending on operating conditions). 3) p n maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation. ) p max maximum pressure - maximum pressure permissible for a short time, max. s. ) p 3 peak pressure - short-time pressure (fractions of a second) arising in case of a sudden change of the operating mode; any excess of this pressure during operation is impermissible. Gear Pump / Size GP ccm Volumetric efficiency % 9 98 Mechanical efficiency % 8 Fluid temperature range (NR) C ( F) (-...17) Fluid temperature range (FPM) C ( F) (-...8) Viscosity range mm /s (SUS)...8 ( ), 1 (89) for cold start Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 1 Max. degree of fluid contamination for p bar Class 1/18/1 acc. to ISO Max. degree of fluid contamination for p bar Class /17/1 acc. to ISO Page 1
2 Direction of rotation, reversible design Determine direction of rotation by looking at the drive shaft. The pump can be used only in the specified direction of rotation. The pumps codes (i-directional) have an external drainage located in the cover. CLOCKWISE R COUNTER-CLOCKWISE L REVERSILE INLET OUTLET INLET OUTLET INLET INLET OUTLET Pressure in this port: min. -,3 bar (-, PSI) * max. +, bar (+7,3 PSI) *Other port thread see section Ports design (page 8). M1x1, 1 (.) 18, (.73) Ordering GP Gear pump serie Direction of rotation Counter clockwise Clockwise i-directional Flange design Shaft Type L R F RE RF RH S SC AH AI AJ AK CH CI CJ CK DD DF DH DI DJ DK DL KH VL VJ VM VN S R C GA GC GD GE UA U UD UE HE HF HH HI HK KA K KH KI M ME MJ N V H Shaft seal No designation standard without shaft seal Seals NR FPM (Viton) HNR / ports Ports orientation Ports orientation S *R *C Combination of Flanges and Shafts **see page 8 *Not available for i-directional pumps Flange Design F RE RF RH S SC AH AI AJ AK Shaft Type CH CI CJ CK DD DF DH DI DJ DK DL KH VJ VL VM VN Page
3 ccm ccm 8 ccm bar bar 9 bar bar 1 bar bar bar bar bar bar bar 7 bar 1 8 bar bar bar 1 3 bar 3 bar bar 1 bar bar bar 1, 1 3, 1 3, 1 3 3, Rotation speed n [/min] Rotation speed n [/min] Rotation speed n [/min] 1 ccm 1 ccm ccm bar bar 8 bar bar 18 7 bar bar bar bar bar 1 1 bar bar bar 8 bar bar bar bar bar bar, 1 3 3,, 1 3,, 1 3, Rotation speed n [/min] Rotation speed n [/min] Rotation speed n [/min] ccm 31 ccm Characteristics measured at ν = 3 mm /s (1 SUS) bar bar bar 9 bar bar bar bar bar bar 8 bar bar bar bar bar 8 bar bar bar bar bar bar bar bar 9 bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 9 bar bar 1 bar 8 bar bar bar bar, 1,8 bar bar bar bar bar Rotation speed n [/min] bar bar bar bar bar 17 bar bar bar bar bar, 1 1,, Rotation speed n [/min] 1 8 Page 3
4 Ordering - Multiple Version GP - / / - - / / - Gear pump serie P Direction of rotation Counter clockwise Clockwise i-directional Front pump (shaft side) 8 Middle pump Rear pump L R S C Front pump M ME MJ GA GC GD GE Middle pump UA U UD UE HE HF HK Rear pump HH HI KA K KC KD N V H Shaft seal No designation standard without shaft seal Seals NR FPM (Viton) HNR / ports Always from left: - Ports orientation Use blind plug for not used ports Flange design F RE RF RH S SC AH AI AJ AK CH CI CJ CK DD DI DJ DK DL KH VL VJ VM VN Shaft Type Ports orientation S *C **see page 8 *Not available for i-directional pumps Flange design in millimeters (inches) F (3.9) 9 (3.) 9 (3.) 8 (3.1) x 9 (.3) 8 (1.89) 8 (3.1) h 7 (.8) 13 (.1) RE 113 (.), (1.9) 3, (1.8) 88 (3.) 71, (.81) 19 (.7) x 9 (.3) 9, (3.79) (.) 3, (1.) f7 Page
5 Flange design in millimeters (inches) RF RH 9 (3.) 7 (.83) 19 (.7) 7 (.8) 93 (3.) 7 (.9) [ (.87)] 1 (.3) 118 (.) 3, (1.71) 3, (1.3) x 9 (.3) (3.9) 8 (3.1) h8 1 (.33) 9 (3.) 39 (1.) 1 (.3) x 9,3 (.37) (.3) f8 (.) S SC 113 (.) 7, (1.87) 1 (.1), (.19) x 11 (.3) 1 (.7), (.) 8, (3.) f7 1 (.9) 17 (.89) 1 (.7) x 1,3 (.) 1 (.7),3 (.) 1, (.) f8 19 (.7) 19 (.7) AH AI 8 (3.31) (.3) 17 (.7) 7, (.8) 8 (3.31) (.3) 17 (.7) 7, (.8) (3.9) 3,3 (1.3) 1,1 (.) (.3) (1.97) f7 (3.9) 3,3 (1.3) 1,1 (.) (.3) (1.97) f7 x 1 (.7) x 1 (.7) AJ AK (3.9) 3,3 (1.3) 1,1 (.) 8 (3.31) (.3) x 1 (.7) (.3) 17 (.7) 7, (.8) 8x, (1.89x.1) NR 7 3, (.13) (.8) 7,8 (1.88) (.) f7 (3.9) 3,3 (1.3) 1,1 (.) x 1 (.7) 8 (3.31) (.3) (.3) 17 (.7) 7, (.8) 8x, (1.89x.1) NR 7 3, (.13) (.8) 7,8 (1.88) (.) f7 Page
6 Shaft design in millimeters (inches) CH CI DD 1 (.7) 1 (.7) 1,7 (.) 17 (.7) WOODRUFF KEY 3x WASHER 1 NUT M1x1, Max. Nm 1,7 (.) 1, (.) WOODRUFF KEY 3,x, WASHER 1 NUT M1x1, Max. Nm 31,9 (1.) (.9) 1, (.1) 9, (.37) 7, (1.8) 39,8 (1.7) 1:8 7, (1.8) 39,8 (1.7) 1:8 Max. 7 Nm (.3 lbf.ft) ANSI 9.1 9T - 1/3 DP CJ 1,7 (.) 1 (.7) WOODRUFF KEY x, WASHER 1 NUT M1x1, Max. Nm 1, (.) CK 17 (.7) 7,7 (.) WOODRUFF KEY 3x WASHER 1 1,8 (.71) NUT M1x1, Max. Nm DF 31,9 (1.) (.9) 18, (.73) 7, (1.8) 39,8 (1.7) 1:8 17 (.7) 1: 37,7 (1.8) ANSI T - 1/3 DP Max. 1 Nm (11.3 lbf.ft) DH DI DJ 37,9 (1.9) (1.18) 18, (.73), (1.1) 17, (.9) 17,8 (.7) 3,1 (.91) 1, (.) 1, (.) ANSI T - 1/3 DP Max. Nm 17x1,xd ČSN 1 93 Max. Nm 17x1 DIN 8 Max. 1 Nm (11.3 lbf.ft) DK DL KH xf7x1,x9g GOST , (.93) M-7H, (.1), (.) 1 (.) (.98) (1.7) 9 (1.93) Max. Nm A EQUILATERAL SPLINE 1x13x3,, (.17) 3, (.1) 19,3 (.7) A 1, (.) H1 3, (1.) 1, H1 (.) Max. Nm 1 (.9) H13 13 (.1) A - A 1 (.7) 1 (.3) e9,7 (.),9 (.11) 8 (.31) e9 18 (.71) Max. 1 Nm (11.3 lbf.ft) Page
7 Shaft design in millimeters (inches) VJ VL VM 19 (.7) (.8) SQUARE KEY xx19 (.1x.1x.7) Max. Nm (.98), (.) SQUARE KEY xx (.1x.1x.98) Max. Nm, (.87) 1,3 (.) SQUARE KEY,8x,8x, (.19x.19x.87) 3 (1.) 1,9 (.3) 17, (.9) (1.18) 3, (1.) 1 (.9) h7 1, (.) 3 (1.) 19,1 (.7) 1,1 (.83) Max. Nm (17. lbf.ft) VN 3 (1.) 9 (.3) (1.7) 3 (.1) SQUARE KEY xx3 (.x.x1.) Max. Nm (.79) k, (.89) Ports design in millimeters (inches) Metric thread according to ISO 19 A C D A C D ALL MJ M7x 1 (.3) 33 (1.) 1 (.) ME M18x1, 1 (.) (.9) 1 (.) SPP pipe thread according to ISO 8-1 A C D A C D to (.1) GC G1/ 1 (.) 33 (1.) - (.1-1.3) GD G3/ 1 (.3) 39 (1.3) 1 (.) GC G1/ 1 (.) 33 (1.) 1 (.) above (1.3) GE G1 18 (.71) (1.77) GD G3/ 1 (.3) 39 (1.3) UNF thread according to SAE A C D A C D to (.1) UD 7/8-1 UNF- 17 (.7) 3 (1.3) ( ) UE 1-1/1-1 UNF- 19 (.7) 1 (1.1) 1 (.) UD 7/8-1 UNF- 17 (1.) 33 (1.) 1 (.) Page 7
8 Ports design in millimeters (inches) Flanged fittings according to DIN 891/89 ALL HF (.79) M 13 (.1) (1.7) HK (.98) M8 13 (.1) (.17) HE 1 (.9) M 13 (.1) 3 (1.38) Note: HH - for multiple version - for with one common inlet Flanged fittings - square ALL HI (.79) M8 13 (.1) (1.7) HH 13, (.3) M 13 (.1) (1.18) Flanged fittings - cross ALL K (.79) (1.7) KA 13, (.3) M (1.18) to (.1) KH 1 (.) above (.1) KI 19 (.7) M8 13 (.1) 13 (.1) 38 (1.) KH 1 (.) M8 38 (1.) Drains: A C D ALL M M1x1, 1 (.7) (.79) GA G1/ 1 (.7) (1.77) UA 7/1- UNF- 13 (.1) 1 (.83) U 9/1-18 UNF- 1 (.) (.98) 1 (.) Standard Drain port thread: M for M Suction / Pressure Ports GA for G Suction / Pressure Ports UA for U Suction / Pressure Ports Other combination on request **Port orientation ODY COVER Only threaded ports (M, G, U) can be made in the cover. If all ports are required, describe them in the code. Sample: GP-R-RECH-CGDGDGCGC-N For Suction port in Cover, Pressure port in ody: GP-R-RECH-CGDGC-N For Suction port in ody, Pressure port in Cover: GP-R-RECH-CGDGC-N Other combinations for instance two suction ports, one pressure port describe in the order beside the code. GP-R-RECH-CGDGDGC-N Two suction ports, Pressure port in the ody. Page 8
9 GP Pumps - basic design in millimeters (inches) GP-*R-SDD-SG*G*-N x 11 (.3) 1 (.1), (.19) x R 1 (.7) Q 11 (.3), (.) 1, (.1) (.9) 8, (3.) 11 (.3) 19 (.7) 31,9 (1.) A (C) A C A C (.), (1.7) 8, (3.39) 118,1 (.) 1 (.98) 1,9 (.),9 (.13) 137, (.39) (.37), (1.73) 89, (3.1) 11,3 (.78) (1.), (.17) 111, (.38) 13,3 (.) 8 (.9), (1.8) 9,3 (3.3) 1, (.9) (1.3) 9, (.3) 119,1 (.9) 11, (.9) 1 (.73) 8,8 (1.9) 98, (3.88) 1,7 (.1) 31 (1.89) 3,7 (.1) 18, (.), (.3) GP-*R-AJKH-SH*H*-N x,7 (.) (.3) (1.18),7 (.),9 (.11) 7, (.8) (.3) 1,1 (.) (3.9) P Q (3.9) x M 13 (.1) 18 (.71) 3 (1.38) (.) f7 (1,7) + Nm ( lbf.ft) (.79) 17 (.7) (C) A A C A C (.), (1.9) 8, (3.31) 91, (3.9) 1 (.98) 9,9 (1.9),9 (.) 1,1 (.33) (.37), (1.) 87, (3.3) 9, (3.7) (1.) 3, (.9) 9, (.) 11, (.8) 8 (.9) 3, (1.7) 9,3 (3.) 97, (3.8) (1.3) 7, (.) 117,1 (.1) 1,3 (.89) 1 (.73),8 (1.8) 9, (3.8) 3,8 (.9) 31 (1.89) 1,7 (.3) 1, (.98) 133,7 (.) Page 9
10 GPT Pumps - basic design in millimeters (inches) GP-*/*L-SDF-SH*H*/H*H*-N x 11 (.3) 1 (.1), (.19) x R1 (.7) P Q x M 13 (.1) x 3 (1.38) 11 (.3), (.) (.9) 18,7 (.7) 8, (3.) f7 (.79), (.18) (C) 19 (.7) 31,9 (1.) A1 A A1 A C / (.37 /.37), (1.73) 98,8 (3.89) 13,9 (.7) 17,8 (.9) 8 / 8 (.9 /.9), (1.8) 3, (.7), (.91) 18,1 (7.17) 1 / (.73 /.37) 8,8 (1.9) 8, (.) 13,3 (.) 18, (7.9) 1 / (.98 /.) 1,9 (.) 113, (.) 1, (.1) 188, (7.) / (1. /.37), (.17) 1,8 (.7) 1,9 (.3) 197,8 (7.79) GP-1/GP1-,/,L-RECH-SGDGC/GG/GG-N 3, (1.8) 88 (3.) 7 (.83) x 9 (.3) 97 (3.8) 113 (.) 1 (.) A3 1 (.) A A1 1,7 (.) 1 (.7) (.) 9, (.37) 3, (1.) 1:8 1 (.9) 1 (.) (C) 17 (.7) 19 (.7) 39.8 (1.7) A1 A A3 C 1 /, /, (.73 /.1 /.1 ) 8,8 (1.9) 1,3 (.13) 199,8 (7.87) 3, (9.8) 7, (.8) Page
NK Multi-stage submersible pumps
NK Multi-stage submersible pumps PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 10 m APPLICATION LIMITS Maximum liquid temperature +40 C Maximum sand content 0 g/m³ 20 m maximum immersion
More informationTecnidra s.a.i.c. Libertad 6206 (1657) Loma Hermosa Pcia. de Buenos Aires Tel
INTERMOT - ADVANCED - MOTORS IAM SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATIONS Pag. ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES BEARINGS
More informationINTERMOT DUAL DISPLACEMENT MOTORS
INTERMOT DUAL DISPLACEMENT MOTORS IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATIONS Pag. 2 HYDRAULIC FLUID RACCOMENDATIONS INSTRUCTION AND ADVICES BEARINGS SHAFT SEAL FEATURES FLUSHING DISTRIBUTOR
More informationCASM electric cylinders The modular electric cylinder system
CASM electric cylinders The modular electric cylinder system CASM electric cylinders are ideally suited to performing fast and powerful linear movements. Unlike pneumatic or hydraulic cylinders, CASM electric
More informationSingle, oversized roller compresses a low friction hose through a full 360-degree rotation
Graco EP Series Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degree rotation More flow per revolution than conventional designs One hose compression per
More informationDUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationTECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA
TECHNICAL BROCHURE BPRIMELINE R1 Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA Prime Line A Full Range of Product Features Rugged Construction: Cast iron construction in close
More informationCASM electric cylinders
CASM electric cylinders 2 The modular electric cylinder system CASM electric cylinders are ideally suited to performing fast and powerful linear movements. Unlike pneumatic or hydraulic cylinders, CASM
More information2-3-5 Valve Manifolds
2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision
More informationAISI 316L PERFORMANCE RANGE INSTALLATION AND USE
CP-ST Stainless steel centrifugal pumps CP-ST4 Pump body: stainless steel AISI 304 Impeller: stainless steel AISI 304 Shaft: stainless steel AISI 431 CP-ST6 Pump body: stainless steel AISI 316L Impeller:
More informationModel SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless
More informationCAST IRON IMPELLER. VOLTAGE 50 Hz
ENERGY EFFICIENCY KDN CONDITIONING, IRRIGATION, WATER TRANSFER, PRESSURIZATION, INDUSTRIAL APPLICATION TECHNICAL DATA - KDN KDN 3-15.1 KDN 3-15 KDN 3-160.1 KDN 3-160 KDN 3-00.1 * NEW IE MOTOR Enbloc, centrifugal
More informationDual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series
Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.
More informationACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189
ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 HYDROSCAND ACCESSORIES PRODUCT GROUP 500, 505, 507 OCH 510 This product group includes products that complement Hydroscand s range of hoses and fluid connectors,
More informationTechnical Specifications
Standard couplings with poppet valve. Faster interchangeability (except size 12,5). Standard couplings for general purpose applications with poppet valve shut-off system. Faster proprietary profile ( 1/2
More informationEclipse Hermetic Gas Boosters Series HB
Datasheet 620 7/6/2012 Eclipse Hermetic Gas Boosters Series HB Version 1.1 Type Designations The booster is identified by catalog model, assembly number, and ordering part number. The catalog model number
More informationLiberty Process Equipment, Inc.
AP - Operation & Assembly Speed, temperature, viscosity, suction lift, discharge pressure, abrasive content and corrosive action of the liquid be handled should all be considered in applying these pumps.
More informationFirefighting Group Foam Systems. 1. Foam Pourer 2. Foam Makers 3. High Back Pressure 4. Bladder Tanks 5. Foam Porportioner 6.
Firefighting Group Foam Systems 1. Foam Pourer 2. Foam Makers 3. High Back Pressure 4. Bladder Tanks 5. Foam Porportioner 6. Foam Monitor Rim Seal Foam Pourer Model No. 6010 Operating Pressure 4 to 10
More informationCapsule Filling Machine
www.saintyco.com CATALOGUE 2017 PrimaFill CF 12 Technical Data PrimaFill CF 12 Number of stations 8 Number of segment bores 2 sizes: #0, #1, #2, #3, #4 (option #00, #5) 3,000-8,500 s/ h Max. output (pellet
More informationSpare parts list ( ) Spare parts list BR 40/10 C
Spare parts list (59708360) Spare parts list BR 40/10 C 2011-05-09 www.kaercher.com EN Spare parts list BR 40/10 C (59708360)... 6 10 Retaining bracket and switch (02010300)... 7 11 Retaining bracket
More informationFPS-VR Series Vertical Multistage Pumps
INDEX BROCHURE CURVES FPS-VR Series Vertical Multistage Pumps The FPS VR- Series stainless steel Vertical Multistage pump from Franklin Electric is designed for industrial pressure boosting and mining
More informationBROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER
BROEN UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle
More informationPressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120
Data sheet Pressure relief valve VRH 5 / VRH / VRH 60 / VRH hpp.danfoss.com Table of Contents Contents 1. Introduction...2 2. Features...2 3. Variants...2 4. Technical data...3 5. Flow...3 5.1 VRH 5 Max.
More informationPressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120
Data sheet Pressure relief valve VRH 5 / VRH / VRH 60 / VRH 120 hpp.danfoss.com Table of Contents Contents 1. Introduction...2 2. Features...2 3. Variants...2 4. Technical data...3 5. Flow...4 5.1 VRH
More informationD Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks
5.2016.15.k 1 Swing Check Valves D Series / Screwed onnet Screwed End - Full Opening Ductile Iron Swing Checks C C Threaded Swing Checks Pressure 1 2 3 4 300# D300-1 D300-2 D300-3 D300-4 600# D600-1 D600-2
More informationTB131. Gas Conversion Kits for NVx & VPC Heaters. Issue 1.0 May Applies to models: NVx & VPC
TB131 Issue 1.0 May 2018 Applies to models: NVx & VPC Gas Conversion Kits for NVx & VPC Heaters www.powmatic.co.uk +44 (0) 1460 53535 info@powrmatic.co.uk General Information Heater conversion between
More informationSynflex. Mini Catalog
Synflex Mini Catalog Table of Contents Hose Selection Chart Core 5 Hoses (Application/Product) 2 3R30, 3130, 3580, 30CT, 3R80 Core 5 Hoses (Product) 2 3R30, 3130, 3580, 30CT, 3R80 Hose 3R30 Low Pressure
More informationMODEL CM BELT DRIVEN UTILITY VENT SET OVERVIEW
MODEL CM OVERVIEW The CM Series belt driven backward inclined Utility Vent Set fans from S&P offer an excellent choice of product for all medium and high pressure exhaust or supply applications for commercial,
More informationSpare parts list ( ) Spare parts list BR 30/4 C Bp
Spare parts list (59712300) Spare parts list BR 30/4 C Bp 2011-05-09 www.kaercher.com EN Spare parts list BR 30/4 C Bp (59712300)... 6 10 Housing individual parts (02096890)... 7 11 Housing (02096900)...
More informationFor draining expansion tanks, other liquid storage vessels.
Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up
More information9 LABORATORY ACCESSORY
9 NORMAG - LABORATORY GLASSWARE L 309 e.1 DRYING TUBES They serve for drying of gas with suitable desiccants. To avoid sticking of the packing during the process, not shape resistant desiccants (e.g. phosphorus
More informationSpecial Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change
Special Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change Catalogue 21 E High speed three-phase motors with HSK-C tool holder for manual tool change protection type: IP54 Motor description
More informationGF Machining Solutions Mikron MILL E 500U-700U (5 axis)
GF Machining Solutions Mikron MILL E 500U-700U (5 axis) GF has a Worldwide Footprint, 26 countries Over 8,500 employees, #6 machine Tool builder worldwide * Holliston, MA Nearest Technical Center 7/2018
More informationThe Shand & Jurs Model Pressure Relief Vent
PRODUCT DATA SHEET Designed for high efficiency & economy Provides maximum flow capacity Reduces maintenance and replacement costs Suitable for corrosive and toxic applications Standard flange base for
More informationBirmingham City Centre Vision for Movement
Birmingham City Centre Vision for Movement Wes Sedman - Centro Commissioning Team Laying the foundations for a vibrant and liveable global city Birmingham Big City Plan - A City Centre Masterplan A vision
More informationWÄRTSILÄ MARINE REDUCTION GEARS
WÄRTSILÄ MARINE REDUCTION GEARS The cruise ferry Finnmarken is equipped with two Wärtsilä TCH 150V85-S50 gears. The anchor handling tug supply vessels Fairmount Sherpa and Fairmount Summit are both equipped
More informationSmallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationAerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:
More informationPilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
More informationJARVIS. Model 70 Airsnip Air Powered Scissors
Air Powered Scissors EQUIPMENT SELECTION... Ordering No. Airsnip Model 70... 4019009 Air Filter/Regulator/Lubricator.. 3022003 Balancer... 1350084 Power--Pak (250 PSI)... 4026016 TABLE OF CONTENTS... Page
More informationAdapters. The World Standard. Pipe Fittings. Metric Adapters. ISO Port Adapters. Garden Hose Fittings
Adapters Pipe ittings SAE Standards ryseal Threads orgings & Extrusions etric Adapters Economical Reusable orgings & Extrusions ISO Port Adapters eets ISO 649-3 Requirements eets SAE 2244-3 Requirements
More informationNot The Typical Red & Blue
Not The Typical Red & Blue BAT is pleased to announce our new line of high quality, taper-swivel, -AN hose ends. Their distinctive titanium and black anodized finish offers a fresh new look over ordinary
More informationVirto - the flexibility of a natural shape.
- the flexibility of a natural shape. 118 Wash basin Model no.: 252560 Dimensions: 600 x 480 mm Weight: 13,6 kg model no. 291700, model no. 291800, or wash basin boxette, model-no. 876411, of the bathroom
More informationPenberthy Series LL, LM, LH, GL and GH Jet Pumps for Pumping Liquids
Practical, simple and cost-effective alternatives for process industries to pump a range of liquids Features Simple design with no moving parts to wear out. No lubrication required. Virtually maintenance-free.
More informationFlange. Connection Trunnion Ball Valves.
Flange Connection Trunnion Ball Valves www.smstork.com TRUNNION BALL VALVES Where to use On/Off Shore Oil and Gas Production Subsea Oil and Gas Production Oil and Gas Storage Oil and Gas Transportation
More informationINSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL
BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the
More informationTYPE CERTIFICATE DATA SHEET
TYPE CERTIFICATE DATA SHEET N EASA.R.125 for SA 341 Type Certificate Holder Airbus Helicopters 13725 Marignane CEDEX France For Models: SA 341 G, SA 342 J TE.CERT.00049-001 European Aviation Safety Agency,
More informationCOLGED. Isytech
COLGED SPARE PARTS CATALOGUE ERSATZTEILKATALOG CATALOGUE PIECES DETACHEES CATALOGO PARTI RICAMBIO CATALOGO DE PIEZAS DE RECAMBIO CATALOGO PECAS, DE REPOSICAO Isytech -0. --0 9 0 R L 8 4 8 0 L R 4 MOD T0
More informationFugitive Emission Test Report
Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition
More informationPipeline Valves. Fully Welded. Trunnion Ball Valves.
Fully Welded Trunnion Ball Valves www.kurvalf.com TRUNNION BALL VALVES Where to use On/Off Shore Oil and Gas Production Subsea Oil and Gas Production Oil and Gas Storage Oil and Gas Transportation Oil
More informationFBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information
FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated
More informationBerkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I
Cast Iron Flanged, Packing Construction B4EYRMBH Page 0. Date March 4, 03 Supersedes /0/09 9 3 3 8 8 B/M B53 CW M L034.88" 3C 5 8 3B 80 A 3A 3 See Supplement B 9 3, See See Shaft (Not sold separately)
More informationNR, NR4. NR n 2900 rpm. NR4 n 1450 rpm. In-line Pumps. Construction. Applications. Operating conditions
NR, NR Inline Pups n rp n rp onstruction losecoupled, singleipeller, centrifugal pups; electric otor with extended shaft directly connected to the pup. Pup casing with suction and delivery connections
More informationHAND TOOLS. Combination Wrenches 120/1. Combination Wrench Sets 120/1CB. Adjustable Wrenches 250/1. Hexagon Wrenches 230/3SL.
Combination Wrenches 120/1 Unior wrenches are made of quality chrome vanadium steel. They are available in two lines: chrome plated with polished heads or chromium plated only. Wrenches are functional
More informationDesigned for Exceptional Performance, Long Service Life, Low Maintenance Cost Patent Pending
Designed for Exceptional Performance, Long Service Life, Low Maintenance Cost Patent Pending People, Capabilities and Systems to Save Money and Increase Productivity Company Profile We re the largest and
More informationData Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More informationEDM4X, EDM2X. Product Specifications EXPANSION VALVE COILS ALL MODELS
EDM4X, EDM2X Product Specifications EXPANSION VALVE COILS ALL MODELS 1 1/2 thru 5 Tons Multiposition installation upflow, downflow, or horizontal Available for R 410A or R 22 Bolt on TXV metering device
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More informationSpare Parts List 2006-03 PS-3300 TH IMPORTANT! - To assure product SAFETY and RELIABILITY, repairs, maintenance or adjustments should be performed by DOLMAR Service Centers, or other qualified service
More informationWISH NEBRASKA INC CUSTOMER : LOCKWOOD TOWER FT SYSTEM PSI AT TOP OF PIVOT
WISHNE-SAMPLE WISH NEBRASKA INC JANUARY 20, 2010 WISHNE-SAMPLE CUSTOMER : LOCKWOOD 2000 7 TOWER - 1317.98 FT SYSTEM 800 GPM @ 40 PSI AT TOP OF PIVOT FIELD : NELSON R3000 ROTATORS LEGAL : NELSON 20 PSI
More informationFiltration Product Catalog
Filtration Product Catalog Sock / bag filter housing Sock / bag filter Dynalene's filtration products offer a comprehensive particulate removal solution that can be tailored to any fluid application. The
More informationindustrial ball valves
Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with Gyrolok Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure
More information4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationINNOVATION. STRENGTH. PERFORMANCE.
PRESSURE WASHERS 1 INNOVATION. STRENGTH. PERFORMANCE. Across the globe, the Hustler brand signifies innovation, strength, performance and superior customer care. Our mission is to provide the most dependable,
More informationData Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
More informationOWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL Heavy Duty Oil Hose Reel 504200 Description Open hose reel for air, water (high or low pressure), oil or grease, depending on model. Uncoil the hose to the desired length. It can
More informationSIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi
2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless
More informationDesign Guide. No. 160, 8/1/05. AirHeat Burners. AH-MA Series. Version 2
Design Guide No. 160, 8/1/05 AirHeat Burners AH-MA Series Version 2 COPYRIGHT Copyright 200 by Eclipse, Inc. All rights reserved worldwide. This publication is protected by federal regulation and shall
More informationAutomatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.
Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Available materials: Steel, powder coated, RAL7032, RAL3000 (Application
More informationUNODOS + / FLOCDOS +
Operation manual UNODOS+ / FLOCDOS+ (01-09) page 1 of 7 UNODOS + / FLOCDOS + Table of contents page 1. Technical description... 2 1.1 The function... 2 1.2 Technical details... 2 1.3 The dosing performance...
More informationANACONDA SEALTITE CONDUIT TYPE NMFG BLUE
ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE All-plastic, medium mechanical strength, food grade conduit.. NMFG is a conduit specially made for the food industry. The smooth jacket of FDA approved compound
More informationTYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET NO. EASA.A.573 for Virus SW 121 Type Certificate Holder Pipistrel d.o.o. Ajdovščina Goriška cesta 50A 5270 Ajdovščina Slovenia, Europe For models: Virus SW 121 TE.CERT.00048-001
More informationHoses and Accessories PTFE Hoses. Contents. Introduction
Contents Introduction... 1 Guidelines for fitting hose... 2 RX Eriflon-F 621 MD... 4 RX Eriflon-F 621 HD... 5 RX Eriflon-F 622 HD... 6 RX Eriflon-C4 Chlorine... 7 RX Eriflon-F 614... 8 RX Eriflon -F 511...
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationEuropean Aviation Safety Agency
TCDS.R.125 Page 1 of 10 European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET SA 341 G SA 342 J Type Certificate Holder: AIRBUS HELICOPTERS Aéroport International Marseille Provence 13725 Marignane
More informationColor Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual
Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit
More informationPN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
More informationWILKINS 575A WILKINS 575 SIZE 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6"
WILKINS 575 WILKINS 575A 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6" DESCRIPTION The 575 is a reduced pressure assembly. Production began approximately 1975 under the Richwell model RP name. Around 1978 it
More informationIntroduction TEFLON PFA Filtration
Introduction TEFLON PFA Filtration The following pages are devoted to in-line filtration devices. Designs follow the popular 47 and 50 holders manufactured the past 23 years by Savillex Corp. Typical applications
More informationIntroduction 2. Other Applicable Documents 2. Scope of Delivery 3. Attaching the Snap-on Ferrite Suppressor 4
H-206.F2 6-Axis Precision Alignment System Contents Introduction 2 Other Applicable Documents 2 Scope of Delivery 3 Attaching the Snap-on Ferrite Suppressor 4 Connecting the Hexapod to the C-887 with the
More informationEdward W. Daniel, LLC
Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 Manufacturing Warehousing & Distribution Packaging Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 About EWD Capabilities...
More informationMX Series MX40-7XXX Series MX40-6XXX Series. Selection Guide. Applications. DuraDrive Series Actuator (Includes Accessories)
MX40-6043 Series MX40-7XXX Series MX40-6XXX Series Selection Guide Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional control from a DDC system
More informationSpecifications of KINEDIZER burners
3-.6-8 Specifications of KINEDIZER burners Typical burner data Fuel : natural gas at 5 C with 0.9 kwh/nm³ (HHV) - sg = 0.6 [] Combustion air : 5 C - % O - 50 % Humidity - sg =.0 [] Stated pressures are
More informationGT370 HEDGETRIMMER TYPE
GT370 HEDGETRIMMER TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions E13791 GT370-----A New Parts Wiring Diagram Main Menu 44 18 02-04 SEAN HOLDEN GT370 MANUFACTURING PLANT USTI
More informationSE-Unimont The parts marked with an asterisk *) are wear parts, for which no liability based on any legal regulations whatsoever can be accepted
SE-Unimont 8-20 Pos. Ref.No. Description 01 5198883 WH 8300 Machine body 8-15 02 5198883 WH 8213 Lift guide 03 5198883 WH 8214 Trapezoid spindle TR 32 x 3 04 5198883 WH 8215 Fixing flange 05 5198883 WH
More informationSpecification Details: Coded Dash Number M28803/1 -MC PART LISTINGS MANUFACTURER'S DESIGNATION OR TYPE NUMBER TEST OR QUALIFICATION REFERENCE
Specification Details: DLA Land and Maritime - VQ Date: 2/4/2015 Specification: MIL-DTL-28803 Title: Display, Optoelectronic, Readouts, Backlighted Segmented Federal Supply Class (FSC): 5980 Conventional:
More informationGeneral-Use Auto-Tuning HPX-T Series
General-Use Auto-Tuning HPX-T Series Built-in Hyper-tuning automatically adjusts scanning characteristics. Adjustment steps, results and scanning conditions are digitally displayed by LED. Digital display
More informationINSTALLATION INSTRUCTIONS TOWNSEND
INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please
More informationPBG PACKAGED GAS BURNERS
CAPACITIES PBG PACKAGED GAS BURNERS Air Static Pressure ("wc) Excess Air (%) Flame Length (Inches) Model No. Capacity (1000 Btu/hr) Motor HP Air Flow (SCFH) Gas Flow (SCFH) Gas Turndown Max. 440 5.9 4560
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationSTIH) Technical Information Cut-off machine STIHL Cutquik TS 410, 420 Series Guard with defined adjustment range
STIH) Technical Information 5.009 Cut-off machine STIHL Cutquik TS 40, 40 Series 48 Contents. Guard with defined adjustment range. Belt guard, screw. Set of instruction labels 4. Summary. Guard with defined
More informationHardware Solutions Contents
Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking
More informationAvailable materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas).
Manual hose reel type STKi2 The manual hose reel type STKi2 with closed hub is suitable for all industrial and vehicle applications. While extending the drum hub and the cross braces the length of the
More informationAdvantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
More informationNR, NR4 60 Hz. NR n=3450rpm NR 50/250. NR4 n=1750rpm. In-line Pumps
NR, NR z Inline ups onstruction losecoupled, singleipeller, centrifugal pups; electric otor with extended shaft directly connected to the pup. up casing with suction and delivery connections with the sae
More informationSE-Unimont 8-15 Pos. Ref.No. description WH 8000 Machine body WH 8213 Lift guide WH 8214 Trapezoid spindle TR
SE-Unimont 8-15 Pos. Ref.No. description 01 5198883 WH 8000 Machine body 8-15 02 5198883 WH 8213 Lift guide 03 5198883 WH 8214 Trapezoid spindle TR 32 x 12 04 5198883 WH 8215 Fixing flange 05 5198883 WH
More information