TECHNICAL DATA SHEET
|
|
- Adela Lawrence
- 5 years ago
- Views:
Transcription
1 ITEM: Eurocoup flexible couplings, flange adapters and dismantling joints PN6. Place of Manufacturer: Rozenobel 15 City Country Sizes: DN 50 - mm. 6 Bar Flangeadapterbody: Flangeadapterbody: PAS 30 Follower gland / end ring: Up to 1668mm. S275JR EN10025 Flange follower gland / end ring: Studs & Bolts, Plug(s), Washers and Nuts: BS 2494 drinking water approved: EPDM Grade C. Thickness: Microns Coating approx. 300mic. m.d.f.t.
2 ITEM: Eurocoup flexible couplings, flange adapters and dismantling joints PN10. Place of Manufacturer: Rozenobel 15 City Country Sizes: DN 50 - mm. 10 Bar Flangeadapterbody: Up to 326mm. GGG - DIN-EN 1563 Flangeadapterbody: PAS 30 Follower gland / end ring: Up to 326mm. GGG - DIN-EN 1563 Up to 1668mm. S275JR EN10025 Flange follower gland / end ring: Studs & Bolts, Plug(s), Washers and Nuts: BS 2494 drinking water approved: EPDM Grade C. Thickness: Microns Coating approx. 300mic. m.d.f.t.
3 ITEM: Eurocoup flexible couplings, flange adapters and dismantling joints PN16. Place of Manufacturer: Rozenobel 15 City Country Sizes: DN 50 - mm. 16 Bar Flangeadapterbody: Up to 326mm. GGG - DIN-EN 1563 Flangeadapterbody: PAS 30 Follower gland / end ring: Up to 326mm. GGG - DIN-EN 1563 Up to 1668mm. S275JR EN10025 Flange follower gland / end ring: Above 1669mm. S355J2G3 EN10025 Studs & Bolts, Plug(s), Washers and Nuts: BS 2494 drinking water approved: EPDM Grade C. Thickness: Microns Coating approx. 300mic. Min.
4 ITEM: Eurocoup flexible couplings, flange adapters and dismantling joints PN25. Sizes: DN mm. 25 Bar Flangeadapterbody: Up to 222mm. GGG - DIN-EN 1563 Flangeadapterbody: PAS 30 Follower gland / end ring: Up to 170mm. GGG - DIN-EN 1563 Flange follower gland / end ring: Studs & Bolts, Plug(s), Washers and Nuts: BS 2494 drinking water approved: EPDM Grade C. Thickness: Microns Coating approx. 300mic. Min.
5 ITEM: Eurocoup flexible couplings, flange adapters and dismantling joints PN40. Sizes: DN mm. 40 Bar Flangeadapterbody: GGG - DIN-EN 1563 Flangeadapterbody: PAS 30 Follower gland / end ring: GGG - DIN-EN 1563 Up to 1668mm. S275JR EN10025 Flange follower gland / end ring: Studs & Bolts, Plug(s), Washers and Nuts: BS 2494 drinking water approved: EPDM Grade C. Thickness: Microns Coating approx. 300mic. Min.
6 General Notes: In case of discrepancies between Technical Data Sheet and the brochure, Technical Data Sheet shall prevail. S235JR EN10025 = St DIN17100 or equivalent or better. S275JR EN10025 = St DIN17100 or equivalent or better. S355J2G3 or G4 EN10025 = St. 52-3N DIN17100 or equivalent or better. GGG50-DIN EN 1563 = DUCTILE CAST IRON DIN 1563 or equivalent or better. Please note: Unijoint use reduced flange plate thickness Flanges are drilled acc. to ISO UNIJOINT Pipe tolerances: Over a length of 250mm pipe ends must be within following tolerances and ovality (incl. coating?): Cast iron pipes : +1,0, -2,0mm. Steel pipes : P.O.D. 60,3 thru 273,1mm : +1,6, -0,4. : P.O.D. 273,1 thru 2000mm : +2,4, -0,8. : P.O.D thru 3400mm : +4,0, -2,0. In accordance with ANSI/AWWA C are the Pipe tolerances: Over a length of 400mm. for >DN1800 and 250mm. for >DN1800 pipe ends must be within following tolerances and ovality (incl. coating?): Cast iron pipes : +2,0, -2,0mm. Steel pipes : P.O.D. 60,3 thru 400,0mm : +1,5, -1,5. : P.O.D. 400,0 thru 600,0mm : +2,0, -2,0. : P.O.D. 600,0 thru 1050mm : +2,5, -2,5. : P.O.D thru 3000mm : +3,0, -1,5. (L = length of 400mm. for >DN1800 and 250mm. for >DN1800 incl. min. V clearance of 10mm. is indicated on the drawings!) Grade A, Nitrile - NBR (DVGW + KTW approved) Temperature range: -20 C to +100 C. Marked according to Unijoint specifications. Grade C, Ethylene Propylene - EPDM (BS2494 Temperature range: -40 C to +90 C. Marked according to Unijoint specifications. drinking water approved). Not included are neither flange gaskets nor flange fasteners. We carried out all the work to build our products according to; ANSI/AWWA C219-01, (Revision of ANSI/AWWA C219-97, C219-91) Standard for Bolted, sleeve-type couplings for plain-end pipe.
7 QUALITY ASSURANCE We manufacture all components to suit the requirements of the various National and International Standards applicable within the Pipeline Industry. Our Quality Assurance Department carries out all work in accordance NEN-EN-ISO 9001: For further information please contact our Techn. Dep.: On all projects we supply a full technical submittal process and our goods for these projects have been inspected by major inspection agencies and consultants such as; Norkse Veritas, SGS, Lloyds, Germanischer Lloyd, KIWA, Halcrow, Brown & Root, ADWEA, KAHRAMAA, Tebodin. Rozenobel 15 P.O. Box 7014 NL-5980 AA PANNINGEN The Netherlands Telephone : +31-(0) Fax : +31-(0) unijoint@tyco-valves.com WEB-site : We reserve the right to change specifications without prior notice. Last up-date of this brochure / technical data sheet: 27 March 2006 Copyright 2000 by UniJoint B.V. No parts of this brochure may be recorded, stored, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Uni Joint B.V.
DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
More informationBerkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I
Cast Iron Flanged, Packing Construction B4EYRMBH Page 0. Date March 4, 03 Supersedes /0/09 9 3 3 8 8 B/M B53 CW M L034.88" 3C 5 8 3B 80 A 3A 3 See Supplement B 9 3, See See Shaft (Not sold separately)
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationFittings and valves. Ductile cast iron valves. for water and gas supply
Fittings and valves Ductile cast iron valves for water and gas supply 1 Valves made of ductile cast iron Leak-proof, The basis cast iron Düker places emphasis on protection: Quality and a long life cycle,
More informationDual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series
Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.
More informationFlange. Connection Trunnion Ball Valves.
Flange Connection Trunnion Ball Valves www.smstork.com TRUNNION BALL VALVES Where to use On/Off Shore Oil and Gas Production Subsea Oil and Gas Production Oil and Gas Storage Oil and Gas Transportation
More informationManual Actuator. CR / CM Levers. Type Series Booklet
Manual Actuator CR / CM Type Series Booklet Legal information/copyright Type Series Booklet CR / CM All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
More informationSIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi
2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless
More informationa Nexans company Catalogue 2009
a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationAMS MU800 Mullion Drained Curtain Walling
SPECIFICATION AMS MU800 Mullion Drained Curtain Walling The AMS MU800 mullion drained curtain walling system offers unique architectural design features combined with market leading weather performance.
More informationFLEXIBLE METAL HOSE.
FLEXIBLE METAL HOSE info@ayvaz.com www.ayvaz.com 2 FLEXIBLE METAL HOSES INDUSTRIAL HOSES BRAIDED AND NON-BRAIDED HOSES WITHOUT FITTINGS Standard and open pitch corrugated metal hose AISI 304 or AISI 321
More informationCertainTeed. Access Covers and Gratings. REXUS Manhole Covers
CertainTeed Access Covers and Gratings REXUS Manhole Covers Advanced Ergonomics REXUS enables utility personnel to undertake visual inspections and routine maintenance of underground networks with the
More informationPipeline Valves. Fully Welded. Trunnion Ball Valves.
Fully Welded Trunnion Ball Valves www.kurvalf.com TRUNNION BALL VALVES Where to use On/Off Shore Oil and Gas Production Subsea Oil and Gas Production Oil and Gas Storage Oil and Gas Transportation Oil
More informationLiberty Process Equipment, Inc.
AP - Operation & Assembly Speed, temperature, viscosity, suction lift, discharge pressure, abrasive content and corrosive action of the liquid be handled should all be considered in applying these pumps.
More informationTuf-Lite II Fans 8000 Series Hub
Tuf-Lite II Fans 8000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 through 40 Diameter Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationSpare parts list ( ) Spare parts list BR 30/4 C Bp
Spare parts list (59712300) Spare parts list BR 30/4 C Bp 2011-05-09 www.kaercher.com EN Spare parts list BR 30/4 C Bp (59712300)... 6 10 Housing individual parts (02096890)... 7 11 Housing (02096900)...
More informationMaintenance & Repair Instructions
brands you trust. Maintenance & Repair Instructions CRANE ChemPharma, Tufline Flanged 6 & 8 Process Ball Valves Figure 1. 2-Piece Ball Valves Tufline 521F, 523F Size: 6" - 8" Tufline 521R, 523R Size:
More informationSUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops
More informationPilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
More informationPINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve
More informationTuf-Lite II Fans 7000 Series Hub
Tuf-Lite II Fans Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 & 3 Diameter Hudson Tuf-Lite II (white, prev. blue***) fan blades are made from fiberglass
More informationMR95 Series Pressure Regulators
Instruction Manual MR95 Series October 2014 MR95 Series Pressure Regulators P1757 TYPE MR95L P1753 TYPE MR95H PRESSURE REDUCING REGULATORS Figure 1. Typical MR95 Series Pressure Regulators D103587X012
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationindustrial ball valves
Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with Gyrolok Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationSpare parts list ( ) Spare parts list BR 40/10 C
Spare parts list (59708360) Spare parts list BR 40/10 C 2011-05-09 www.kaercher.com EN Spare parts list BR 40/10 C (59708360)... 6 10 Retaining bracket and switch (02010300)... 7 11 Retaining bracket
More informationMR95 Series Pressure Regulators
Instruction Manual D103587X012 MR95 Series July 2017 MR95 Series Pressure Regulators TYPE MR95L TYPE MR95H PRESSURE REDUCING REGULATORS Figure 1. Typical MR95 Series Pressure Regulators Specifications
More informationClearly the Best FLEXIBLE PVC SOLUTION
Clearly the Best FLEXIBLE PVC SOLUTION M.T.I. See-Thru STRIP DOORS MT.I. Flexible See-Thru Strip Doors are an economical answer to various barrier problems including shops, factories, warehouses, food
More informationMODELS: 440 SM & 440 SMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 440 SM & 440 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
More informationGraphite Ribbon/Filament Packing for Fisher Sliding Stem Valves
Instruction Manual Graphite Packing for Sliding-Stem Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Storage and Startup...
More informationFLEXIBLE STAINLESS STEEL CONNECTION HOSES
FLEXIBLE STAINLESS STEEL CONNECTION HOSES LARGE RANGE SUPERIOR IN PRICE & QUALITY TECHNICAL DOCUMENTATION Bijgewerkt tot en met augustus 2015 (wijzigingen / correcties en zetfouten voorbehouden). UK 013
More informationTECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA
TECHNICAL BROCHURE BPRIMELINE R1 Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA Prime Line A Full Range of Product Features Rugged Construction: Cast iron construction in close
More information6. Textile Products. Cargo Restraint Nets. Please feel free to contact us for your projects!
6. Textile Products Cargo Restraint Nets and Straps 37 6. Textile Products Cargo Restraint Nets allsafe JUNGFALK manufactures for various customers cargo restraint nets designed to their specific requirements.
More informationWeld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No.
8.11 Accessory parts Table of Contents Protection parts for lubrication points Weld-on nut 8.11.2 Protection ring 8.11.2 Protector for lubrication points 8.11.3 Weld-on piece for lubrication points 8.11.3
More informationEdward W. Daniel, LLC
Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 Manufacturing Warehousing & Distribution Packaging Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 About EWD Capabilities...
More informationget connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
More informationY Camper Shell Tracks, 37 Cross Bars. Y Camper Shell Tracks, 44 Cross Bars.
Y06-550 63 Camper Shell Tracks, 37 Cross Bars. Y06-560 63 Camper Shell Tracks, 44 Cross Bars. Important: Parts List Please read these instructions carefully prior to installation. Please refer to your
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationTIMBER BOLLARDS TYPE I. TYPE ll TS mm Radius 150 x 100 white painted Timber post dia Timber Post. Ground Level NOTES:
30 95 15 20mm Radius x 100 white painted Timber post 900 700 125 dia Timber Post Ground Level 500 500 TYPE I TYPE ll NOTES: 1. Type I Bollards are generally to be installed in grass verge areas. 2. Type
More informationINSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL
BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the
More informationHoses for foodstuff and drink processing. Food quality hoses
Hoses for foodstuff and drink processing for various food and beverage industrial processes Oy s food quality hoses are produced on clean anodized aluminium mandrels by experienced professionals. This
More informationTuf-Lite III Fans 4000KW Series Hub
Tuf-Lite III Fans 4000KW Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 11 through 20 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass
More informationContent. Type SIL100 Ultra-pure silicone hose 4. Type SIL200 Fabric-reinforced silicone hose 6. Type SIL300 Wire-reinforced silicone hose 8
Silicone hoses Introduction The Markert Group specialises in the development and manufacture of customised industrial hose assemblies for demanding applications. Based on our employees' many years of extensive
More informationBruna Epdm Neopr Sizes: ½, ¾, 1, 1 ¼, 1 ½, 2, 2 ½, 3, 4, 5, 6 Full Teflon Viton CAM ARMS - PINS RINGS FOR CAMLOCKS
Bestline Mining Supplies Ltd, are appointed distributors of superior AIRLINE COUPLINGS HOSE CLAMPS HOSE AND PIPE FITTINGS. We work closely with our manufacturers in South Africa to bring you the best quality
More informationModel SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless
More informationTuf-Lite and Tuf-Lite II Fans 6000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32 and 33 Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades are made
More informationFPS-VR Series Vertical Multistage Pumps
INDEX BROCHURE CURVES FPS-VR Series Vertical Multistage Pumps The FPS VR- Series stainless steel Vertical Multistage pump from Franklin Electric is designed for industrial pressure boosting and mining
More informationPN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
More information34070 Sec13 SpecialtyV1 6/21/03 12:17 PM Page 339 SPECIALTY TOOLS 13
SPECIALTY TOOLS 13 TELESCOPIC MAGNETIC RETRIEVING TOOL Versatile telescoping handle and all-angle ball joint. 2375 16-3 4" to 26-3 4".40 Fed l Specs.: GGG-F-360B INSPECTION MIRRORS Versatile all-angle
More informationBecause time is money.
R WATER AND WASTEWATER Because time is money. The Victaulic system for water and wastewater piping systems. The Victaulic system the fast, easy, reliable method for piping in water and wastewater treatment
More information3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut
Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -
More informationbrands you trust. Lead Free Ball Valves Crane ChemPharma & Energy
brands you trust. Lead Free Ball Valves Lead Free Ball Valve Features & Benefits NSF 6 Certified brass Material, fully compliant with national legislation. Quick delivery, in stock and offered for shipment
More informationMystic II Round. 3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut
Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -
More informationLuxor Round. 3/8 Washer /8-16 Serrated Flange Nut
Luxor Round Part # 420929 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Sand Jubilee 2214 1 - - - - - - - - x52 Sand Jubilee 22-1 - - - - - - - x52
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5912 Fourth edition 2011-10-01 Camping tents Tentes de camping Reference number ISO 5912:2011(E) ISO 2011 ISO 2011 COPYRIGHT PROTECTED DOCUMENT All rights reserved. Unless otherwise
More informationTRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
More informationIntroduction to HepSure TM
NEW QSC120 MRC1 QSC175 MRC2 STANDARD COUPLINGS 110mm PVC-U 100mm Ductile Iron 100mm Cast Iron (BS416) 100mm Cast Iron (BS437) 100mm Stainless Steel 100mm SuperSleve (see also MRC1) 100mm (4") Salt Glazed
More informationMODELS: 500 SM & 500 SMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 500 SM & 500 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
More informationXENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL
TEF 9964 XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL IMPORTANT Read this instruction carefully before installing the product 996A106032 TUM 1024 REV. E 06.02.14 Tranberg AS P.O. Box 8033 N-4068 Stavanger
More informationCatalogue. Stainless Steel Fittings and Hygienic Range. brands products. Plugs, Caps and Locknuts St/Steel Range 5
brands products Stainless Steel Fittings and Hygienic Range Hygienic Tubing, Fittings and Valves 1 Hosetails St/Steel Range 3 Connectors St/Steel Range 4 Sockets St/Steel Range 5 Plugs, Caps and Locknuts
More informationPARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT
PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationHow to Build Your Own Flour Mill and Sifter
Prototype and plans developed by Hugo Gervais Custom Fabrication, North Hero, VT Materials List: How to Build Your Own Flour Mill and Sifter Quantity Materials 4 2 X 2 X 26 3 / 16 Square tubing 1 2 X 2
More informationTechnical Blade Specification for LM 48.8 P rotor blade
Project : LM 48.8 P Document type :Technical Blade Specification Blade item number : 017545-02 Document no. / rev. : BS-00081/A2 Client : Fuhrlander Eng Change ID : 27486/A Number of pages : 10 Date :
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationComposite & Polymer Meter Box Lids
TRUMBULL MANUFACTURING, INC. 3850 Hendricks Road, Youngstown, Ohio 44515 Phone: 330.270.7888 Toll Free: 877.504.1507 Fa: 330.392.0756 Find out more at: trumbull-mfg.com Composite & Polymer Meter Bo Lids
More informationMR98 Series Backpressure Regulators, Relief and Differential Relief Valves
Instruction Manual D103588X012 October 2016 Backpressure Regulators, Relief and Differential Relief Valves P1757_1 Type MR98L P1753_1 TYPE MR98H Figure 1. Typical Backpressure Regulators, Relief and Differential
More informationCAST IRON IMPELLER. VOLTAGE 50 Hz
ENERGY EFFICIENCY KDN CONDITIONING, IRRIGATION, WATER TRANSFER, PRESSURIZATION, INDUSTRIAL APPLICATION TECHNICAL DATA - KDN KDN 3-15.1 KDN 3-15 KDN 3-160.1 KDN 3-160 KDN 3-00.1 * NEW IE MOTOR Enbloc, centrifugal
More informationBXUV.N619 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263
BXUV.N619 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements
More informationCARTRIDGE AND BAG FILTER UNIT. Passion for Filtration
CARTRIDGE AND BAG FILTER UNIT Passion for Filtration CARTRIDGE AND BAG FILTER UNITS CARTRIDGE AND BAG FILTER UNITS OUR RANGE OF CARTRIDGE AND BAG FILTER UNITS Cartridge and Bag Filter Units are the most
More informationHVAC Products for Better Ductwork Product Overview
HVAC Products for Better Ductwork Product Overview for better ductwork TABLE OF CONTENTS ACCESS DOORS For Rectangular Duct and Other Flat Surfaces RD Access Doors Page 1 RD Access Door Adapter Kit for
More informationMolded High-Voltage Bushing Wells
66-10 Molded High-voltage Bushing Wells Howard Industries Components Division Molded High-Voltage Bushing Wells Catalog Section 66-10 INTRODUCTION Howard Industries molded high-voltage bushing wells are
More informationSTRUCTURAL PRESSURE VESSELS' ACCESSORIES & SPARE PARTS WATER PURIFICATION TANKS & SYSTEMS
STRUCTURAL PRESSURE VESSELS' ACCESSORIES & SPARE PARTS WATER PURIFICATION TANKS & SYSTEMS TABLE OF CONTENT TABLE DES MATIÈRES MATERIALS...5 POLYMERS...5 RUBBERS/ELASTOMERS...6 METALS...6 USER GUIDE...7
More informationExploded views meat slicer: 800S. DEKO Holland bv B Arnhem The Netherlands
Exploded views meat slicer: 800S DEKO Holland bv. 6827 B Arnhem The Netherlands DEKO Holland bv. Recommended spare parts list Part no. Description 260-07/ 260-08/ 260-5 Switch 230 Volt / Switch 400 Volt
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More informationT&S BRASS AND BRONZE WORKS, INC.
Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 BL-570-08 Travelers Rest, SC: 800-76-03 Simi Valley, CA: 800-3-050 Fax: 86-83-358 www.tsbrass.com 7 /" This Space for Architect/Engineer Approval
More informationBROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER
BROEN UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle
More informationSKU Product Name Price American Underslung
Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price American Underslung MISC-0359
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More information2-3-5 Valve Manifolds
2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision
More informationTo add airplane serial numbers thru and 172S0001 thru 172S9974 to the Effectivity section.
Revision Transmittal February 13, 2006 TO: Cessna Distributors, Single Engine Service Stations and CPC's SUBJECT: Single Engine Service Bulletin, Floorboard Bulkhead Rivet Inspection. REASON FOR REVISION
More informationPRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
More informationInstallation and operation instructions for KINEMAX burners
-. - Installation and operation instructions for KINEMAX burners Application requirements View port A view port to observe burner flame is essential to inspect the flame aspect. Locate the view port downstream
More informationTavernier Round. 3/8 x 1-7/8 Washer /8-16 Serrated Flange Nut
Tavernier Round Part # 420989 Round Packing List ITEM DESCRIPTION PART # 8 12 15 18 21 24 27 30 33 Carton # 1 8 x52 Gray Sawgrass 121449 1 - - - - - - - - Carton # 2 Carton # 3 12 x52 Gray Sawgrass 121450-1
More informationPRODUCT SPECIFICATION
Product Family Product Number Ages Rainbow Swing GS-RS3100 2 to 12 years 9 0 / 2.75 m Capacity 4 Size Use Zone W: 11 9 / 3.57 m H: 9 0 / 2.75 m L: 23 7 / 7.19 m W: 7 9 / 2.35 m Fall Height Shipping Weight
More informationTERMINAL BLOCK MARKERS MG CPM
1 TERMINAL BLOCK MARKERS MG CPM MG CPM for terminal block markers Weidmüller, ABB Entrelec, Wago, Allen Bradley, Conta clip, Harting, Morsettitalia, Woertz, Connectwell; are availablein versions to suit
More informationPage 92
Page 92 Page 90 Page 91 Page 89 Page 94 Page 93 Page 88 Page 87 175 c c a a b 175 800 750 1 STAINLESS STEEL ANGLE FLOOR OUTSIDE SUBSTATION 1700 400 A A 100 100 1600 13 BOLT SEE DETAIL D ON R.C.C.
More informationANACONDA SEALTITE CONDUIT TYPE NMFG BLUE
ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE All-plastic, medium mechanical strength, food grade conduit.. NMFG is a conduit specially made for the food industry. The smooth jacket of FDA approved compound
More informationContinental Industries CON-STAB ID SEAL FITTINGS or FAX Visit
Continental Industries CON-STAB ID SEAL FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958
More informationHammer, Discus, Shot Put, Javelin
Hammer, Discus, Shot Put, Javelin Competition Aluminium Discus And Hammer Cage 7/10 M The competition aluminium discus and hammer cage is made from extra sturdy aluminium profiles. The profile measures
More informationAdvanced Customization Type 1. White Paper
Advanced Customization Type 1 White Paper Table of contents Introduction... 4 Scope... 6 Special dimensions... 6 Machining... 8 Finish... 10 Mounting facilities... 14 Assembly... 18 Printed panels...
More informationThe Shand & Jurs Model Pressure Relief Vent
PRODUCT DATA SHEET Designed for high efficiency & economy Provides maximum flow capacity Reduces maintenance and replacement costs Suitable for corrosive and toxic applications Standard flange base for
More informationADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS
ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS SAFETY SPRAY SHIELDS FOR FLANGES CLOTH Our plastic cloth safety shields
More informationLouvre Specifications
Louvre Specifications Louvre System Components 01. Louvre windows shall be Kool Vu as manufactured by Pty Ltd. 0. Louvre channel frame shall be in extruded architectural grade 0 T aluminium. New Clips
More informationSpiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8
Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555
More informationCOOPER FREESTANDING TUB FAUCET INSTALLATION
SKU(s): 940972 COOPER FREESTANDING TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no
More informationMARINE & INDUSTRIAL PLASTICS LTD
MIP COMMERCIAL PRICE LIST MARCH 2018 GLOVE BOXES GB Mk 21 Standard Specification 5925.00 Mk 21 Basic Specification 5271.00 Mk 22 Standard Specification 9650.00 Mk 22 Basic Specification 8599.00 Mk 23 Standard
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5912 Fourth edition 2011-10-01 Camping tents Tentes de camping Reference number ISO 5912:2011(E) ISO 2011 ISO 2011 COPYRIGHT PROTECTED DOCUMENT All rights reserved. Unless otherwise
More information