Companion volume for MEA Aeroskills Training Package Skill Sets by purpose Release 2.0

Transcription

1 Companion volume for MEA Aeroskills Training Package Skill Sets by purpose Release 2.0

2 These materials were developed by in association with the Commonwealth Government through the Department of Education and Training 2015 Commonwealth of Australia. With the exception of the Commonwealth Coat of Arms, the Department s logo, any material protected by a trade mark and where otherwise noted, all material presented in this document is provided under a Creative Commons Attribution-No Derivative Works 3.0 Australia licence. Disclaimer This work is the result of consultations with Australian industry participants. It is a collaborative view and does not necessarily represent the view of Department of Education and Training or any specific body. For the sake of brevity it may omit factors which could be pertinent in particular cases. While care has been taken in the preparation of this material, Department of Education and Training and the original developer do not warrant that any licensing or registration requirements specified here are either complete or upto-date for your State or Territory. Department of Education and Training and the original developer do not accept any liability for any damage or loss (including indirect and consequential loss) incurred by any person as a result of relying on the information contained in this material. The Commonwealth, through Department of Education and Training, does not accept any liability to any person for the information or advice (or the use of such information or advice) which is provided in this material or incorporated into it by reference. The information is provided on the basis that all persons accessing this material undertake responsibility for assessing the relevance and accuracy of its content. No liability is accepted for any information or services which may appear in any other format. No responsibility is taken for any information or services which may appear on any linked websites. Published by: Release Date: 5 August, 2015 For further information about this Companion Volume or any other work being undertaken by Manufacturing Skills Australia (MSA), please visit: Level 3, 104 Mount Street North Sydney NSW 2060 T: F: E: info@mskills.org.au W:

3 Companion volume for MEA Aeroskills Training Package - Skill Sets by purpose Background The aviation industry is highly regulated and work performed must often be on the basis of specific task approval by either a Regulator or the organisation operating within specific regulatory requirements. In addition, the certification of work and the release of aircraft to service after, in the Civil Aviation Safety Authority (CASA) regulatory system, must be performed by an individual with the applicable licence that contains the privileges relevant to the aircraft type and task. Such approvals are covered by a large number of Skill Sets that are contained in this Companion Volume and sorted by the purpose of the Skill Set. Skill Sets have also been developed to enable individuals with allied trade qualifications to attain competencies required for the grant of approvals to repair and overhaul items of aeronautical product (). The MEA Skill Sets are presented in separate sections that relate to their purpose, as below. Release 1: April 2015 Section 1 contains Skill Sets applicable to individuals with relevant allied trade Certificate III or Certificate IV qualifications that provide competencies required for employment in aviation component workshops operating under either the CASA or the Australian Defence Force (ADF) regulatory systems. Section 2 contains Skill Sets that meet CASA requirements for the removal of exclusions from B1 and B2 aircraft engineer licences, and for the grant of an A licence to holders of a Certificate IV in Aeroskills or a B2 licence. Section 3 contains Skill Sets that meet CASA requirements for the grant of authorisations to individuals working in CASR Part 145 organisations, and where applicable to individuals working under the ADF regulatory system (DEFAUST 9022). Release 2: August 2015 Section 4 contains Skill Sets that meet CASA requirements for the grant of Small Aircraft Licence Additional Ratings and for the progression from Small Aircraft Licence to a full B1.1, B1.3 or B2 licence required for large aircraft.

4 Table of contents Companion volume for MEA Aeroskills Training Package - Skill Sets by purpose... 3 Background... 3 SECTION Aviation Maintenance Workshop Skill Sets...10 Avionics...10 Skill Set AMW001 Electrical component repair/overhaul...10 Skill Set AMW002 Mechanical and electro-mechanical instrument component repair/overhaul...11 Skill Set AMW003 Aircraft display, control and distribution system component repair/overhaul...12 Skill Set AMW004 Oxygen system component repair/overhaul...12 Skill Set AMW005 Aircraft radio frequency communication and navigation system component repair/overhaul 13 Skill Set AMW006 Aircraft pulse system component repair/overhaul...13 Skill Set AMW007 Aircraft audio and visual system and reproducer repair/overhaul...14 Mechanical...15 Skill Set AMW008 Hydraulic system component repair/overhaul...15 Skill Set AMW009 Electro-hydraulic component repair/overhaul...15 Skill Set AMW010 Pneumatic system component repair/overhaul...16 Skill Set AMW011 Electro-pneumatic component repair/overhaul...16 Skill Set AMW012 Fuel system component repair/overhaul...16 Skill Set AMW013 Gas turbine engine air inlet and compressor module/component repair/overhaul...17 Skill set AMW014 Gas turbine engine combustion section module/component repair/overhaul...17 Skill Set AMW015 Gas turbine engine turbine and exhaust module/component repair/overhaul...18 Skill Set AMW016 Gas turbine engine ancillary section module/component repair/overhaul...18 Skill Set AMW017 Piston engine disassembly for repair/overhaul...19 Skill Set AMW018 Repair and/or overhaul aircraft piston engine cylinder assembly...19 Skill Set AMW019 Repair and/or overhaul aircraft piston engine crankcase assembly...20 Skill Set AMW020 Reassemble aircraft piston engines...20 Skill Set AMW021 Assemble aircraft piston engine quick engine change unit...20 Skill Set AMW022 Test aircraft piston engines after repair or overhaul...21 Skill Set AMW023 Propeller repair/overhaul...21 Skill Set AMW024 Rotary wing dynamic component repair/overhaul...22 Skill Set AMW025 Mechanical system component repair/overhaul...22 Skill Set AMW026 Composite structure...23 SECTION AIRCRAFT MAINTENANCE ENGINEER LICENCE SKILL SETS...24 Skill Sets for Removal of B1 and B2 Licence Exclusions...24 Skill Set LME001 Electrical B1.1 Licence Exclusions E1 and E4 Removal...25 Skill Set LME002 Electrical B1.1 Licence Exclusions E1 and E4 Removal (small aircraft with gas turbine engine)..25 Skill Set LME003 Electrical B1.2, B1.3 or B1.4 Licence Exclusions E1 and E4 Removal...26 Skill Set LME004 Electrical B1.2 or B1.4 Licence Exclusions E1 and E4 Removal (small aircraft/helicopters)...26 Skill Set LME005 Electrical B2 Licence Exclusions E1 and E4 Removal...27

5 Skill Set LME006 Electrical B2 Licence Exclusions E1 and E4 Removal (small aircraft or helicopters)...27 Skill Set LME007 Airframe B1.1 Licence Exclusion E2 Removal...27 Skill Set LME008 Airframe B1.1 Licence Exclusion E2 Removal (small aircraft with gas turbine engine)...28 Skill Set LME009 Airframe B1.2 Licence Exclusion E2 Removal...29 Skill Set LME010 Airframe B1.2 Licence Exclusion E2 Removal (working on small aircraft)...30 Skill Set LME011 Airframe B1.3 and B1.4 Licence Exclusion E2 Removal...30 Skill Set LME012 Airframe B1.4 Licence Exclusion E2 Removal (working on basic helicopters)...31 Skill Set LME013 Power Plant B1.1 Licence Exclusion E3 Removal...32 Skill Set LME014 Power Plant B1.2 Licence Exclusion E3 Removal...32 Skill Set LME015 Power Plant B1.2 Licence Exclusion E3 Removal (working on small aircraft)...33 Skill Set LME016 Power Plant B1.3 Licence Exclusion E3 Removal...33 Skill Set LME017 Power Plant B1.4 Licence Exclusion E3 Removal...33 Skill Set LME018 Power Plant B1.4 Licence Exclusion E3 Removal (working on basic helicopters)...34 Skill Set LME019 Instrument B1 Licence Exclusions E5 and E7 Removal...34 Skill Set LME020 Instrument B1.2 and B1.4 Licence Exclusions E5 and E7 Removal (small aircraft/helicopters) 35 Skill Set LME021 Instrument B2 Licence Exclusions E5 and E7 Removal...35 Skill Set LME022 Instrument and Radio B1 Licence Exclusion E6 Removal...36 Skill Set LME023 Instrument and Radio B1.2 and 1.4 Licence Exclusion E6 Removal (small aircraft/helicopters)...36 Skill Set LME024 Instrument and Radio B2 Licence Exclusion E6 Removal...37 Skill Set LME025 Instrument and Radio B2 Licence Exclusion E6 Removal (non-type rated aircraft/helicopters)...38 Skill Set LME026 Radio B1 Licence Exclusion E8 Removal...38 Skill Set LME027 Radio B1.2 and B1.4 Licence Exclusion E8 Removal (working on small aircraft/helicopters)...39 Skill Set LME028 Radio B2 Licence Exclusion E8 Removal...39 Skill Set LME029 Radio B2 Licence Exclusion E8 Removal (non-type rated aircraft and helicopters)...40 Skill Set LME030 Airframe B1 Licence Exclusion E9 and E43 Removal...40 Skill Set LME031Airframe B1 Licence Exclusion E10 Removal...40 Skill Set LME032 Radio B2 Licence Exclusion E11 Removal...41 Skill Set LME033 Airframe/Engine B1.1 and B1.2 Licence Exclusion E12 Removal...41 Skill Set LME034 Airframe B1 Licence Exclusion E13 Removal...42 Skill Set LME035 Airframe B1 Licence Exclusion E14 Removal...42 Skill Set LME036 Airframe B1.1 and B1.3 Licence Exclusion E15 Removal...42 Skill Set LME037 Airframe B1.1 Licence Exclusion E15 Removal...43 Skill Set LME038 Airframe B1.1 Licence Exclusion E16 Removal...43 Skill Set LME039 Airframe B1.2 Licence Exclusion E16 Removal...44 Skill Set LME040 Radio B2 Licence Exclusion E18 Removal...45 Skill Set LME041 Radio B2 Licence Exclusion E19 Removal...45 Skill Set LME042 Radio B2 Licence Exclusion E20 Removal...45 Skill Set LME043 Radio B2 Licence Exclusion E21 Removal...46 Skill Set LME044 Radio B2 Licence Exclusion E22 Removal...46 Skill Set LME045 Radio B2 Licence Exclusion E23 Removal...47

6 Skill Set LME046 Radio B2 Licence Exclusion E24 Removal...47 Skill Set LME047 Radio B2 Licence Exclusion E25 Removal...48 Skill Set LME048 Radio B2 Licence Exclusion E26 Removal...48 Skill Set LME049 Instrument B2 Licence Exclusion E27 Removal...48 Skill Set LME050 Instrument B2 Licence Exclusion E28 Removal...49 Skill Set LME051 Instrument B2 Licence Exclusion E29 Removal...49 Skill Set LME052 Instrument B2 Licence Exclusion E30 Removal...50 Skill Set LME053 Instrument B2 Licence Exclusion E31 Removal...50 Skill Set LME054 Electrical B2 Licence Exclusion E32 Removal...51 Skill Set LME055 Engine B1.2 or 1.4 Licence Exclusions E33 and E38 Removal...51 Skill Set LME056 Electrical/Instrument/Radio B2 Licence Exclusion E34 Removal...51 Skill Set LME057 Airframe B1.1 or B1.2 Licence Exclusion E35 Removal...52 Skill Set LME058 Engine B1.2 or B1.4 Licence Exclusions E36 and E37 Removal...52 Skill Set LME059 Engine B1.2 or B1.4 Licence Exclusions E36 and E37 Removal (small aircraft/helicopters)...53 Skill Set LME060 Airframe B1.1 or B1.3 Licence Exclusions E39 Removal...53 Skill Set LME061 Airframe B1.2 or B1.4 Licence Exclusion E39 Removal (small aircraft/helicopters)...54 Skill Set LME062 Airframe B1 Licence Exclusion E40 Removal...54 Skill Set LME063 Airframe - B1 Licence Exclusion E41 Removal...54 Skill Set LME064 Airframe B1 Licence Exclusion E42 Removal...55 Skill Set LME065 Electrical B1 Licence Exclusion E44 Removal...55 Skill Sets for Grant of A Licence to Holders of Certificate IV in Aeroskills or B2 Licences...57 Skill Sets for Grant of A Licence to Holders of Certificate IV...57 Skill Set LME066 Units of competency for A1 licence if Certificate IV in Aeroskills (Mechanical) is held...57 Skill Set LME067 Units of competency for A2 licence if Certificate IV in Aeroskills (Mechanical) is held...57 Skill Set LME068 Units of competency for A3 licence if Certificate IV in Aeroskills (Mechanical) is held...58 Skill Set LME069 Units of competency for A4 licence if Certificate IV in Aeroskills (Mechanical) is held...59 Skill Set LME070 Units of competency for A1 licence if Certificate IV in Aeroskills (Avionics) is held...59 Skill Set LME071 Units of competency for A2 licence if Certificate IV in Aeroskills (Avionics) is held...60 Skill Set LME072 Units of competency for A3 licence if Certificate IV in Aeroskills (Avionics) is held...60 Skill Set LME073 Units of competency for A4 licence if Certificate IV in Aeroskills (Avionics) is held...61 Skill Sets for Grant of A Licence to Holders of B2 Licences...61 Skill Set LME074 Units of competency for A1 licence if a B2 licence is held...61 Skill Set LME075 Units of competency for A2 licence if a B2 licence is held...62 Skill Set LME076 Units of competency for A3 licence if a B2 licence is held...62 Skill Set LME077 Units of competency for A4 licence if a B2 licence is held...62 SECTION Skill Sets For Individual Maintenance Authorisations...63 Aircraft Maintenance Task Authorisations...63 Skill Set MTA001 Aircraft egress system...63 Skill Set MTA002 In-flight entertainment system...63 Skill Set MTA003 Borescope inspection approval...64

7 Skill Set MTA004 Aircraft composite structure repair/modification using hot and cold bonding...64 Skill Set MTA005 Aircraft composite structure repair/modification using cold bonding only...65 Skill Sets for Aircraft Welding Authorisations...65 Skill Set MTA006 Aircraft welding using the gas welding process aluminium alloys...66 Skill Set MTA007 Aircraft welding using the gas welding process magnesium alloys...66 Skill Set MTA008 Aircraft welding using the gas welding process carbon and low alloy steels...67 Skill Set MTA009 Aircraft welding using the gas welding process corrosion and heat resisting steels...67 Skill Set MTA010 Aircraft welding using the gas welding process nickel alloys...68 Skill Set MTA011 Aircraft welding using the gas welding process copper based alloys...69 Skill Set MTA012 Aircraft welding using the gas welding process titanium alloys...69 Skill Set MTA013 Aircraft welding using the braze welding process - aluminium alloys...70 Skill Set MTA014 Aircraft welding using the braze welding process - magnesium alloys...70 Skill Set MTA015 Aircraft welding using the braze welding process - carbon and low alloy steels...71 Skill Set MTA016 Aircraft welding using the braze welding process - corrosion and heat resisting steels...71 Skill Set MTA017 Aircraft welding using the braze welding process - nickel alloys...72 Skill Set MTA018 Aircraft welding using the braze welding process - copper based alloys...72 Skill Set MTA019 Aircraft welding using the braze welding process - titanium alloys...73 Skill Set MTA020 Aircraft welding using the gas metal arc welding process - aluminium alloys...73 Skill Set MTA021 Aircraft welding using the gas metal arc welding process - magnesium alloys...74 Skill Set MTA022 Aircraft welding using the gas metal arc welding process - carbon and low alloy steels...75 Skill Set MTA023 Aircraft welding using the gas metal arc welding process-corrosion and heat resisting steel...76 Skill Set MTA024 Aircraft welding using the gas metal arc welding process - nickel alloys...76 Skill Set MTA025 Aircraft welding using the gas metal arc welding process - copper based alloys...77 Skill Set MTA026 Aircraft welding using the gas metal arc welding process - titanium alloys...78 Skill Set MTA027 Aircraft welding using the gas tungsten arc welding process - aluminium alloys...79 Skill Set MTA028 Aircraft welding using the gas tungsten arc welding process - magnesium alloys...79 Skill Set MTA029 Aircraft welding using the gas tungsten arc welding process - carbon and low alloy steels...80 Skill Set MTA030 Aircraft welding using gas tungsten arc welding process - corrosion and heat resisting steel...81 Skill Set MTA031 Aircraft welding using the gas tungsten arc welding process - nickel alloys...82 Skill Set MTA032 Aircraft welding using the plasma arc welding process - aluminium alloys...82 Skill Set MTA033 Aircraft welding using the plasma arc welding process - magnesium alloys...83 Skill Set MTA034 Aircraft welding using the plasma arc welding process - carbon and low alloy steels...84 Skill Set MTA035 Aircraft welding using the plasma arc welding process - corrosion and heat resisting steels...85 Skill Set MTA036 Aircraft welding using the plasma arc welding process - nickel alloys...85 Skill Set MTA037 Aircraft welding using the plasma arc welding process - copper based alloys...86 Skill Set MTA038 Aircraft welding using the plasma arc welding process - titanium alloys...87 Skill Set MTA039 Aircraft welding using the manual metal arc welding process - aluminium alloys...88 Skill Set MTA040 Aircraft welding using the manual metal arc welding process - magnesium alloys...88 Skill Set MTA041 Aircraft welding using the manual metal arc welding process - carbon and low alloy steels...89 Skill Set MTA042 Aircraft welding using manual metal arc welding process - corrosion and heat resisting steels 90 Skill Set MTA043 Aircraft welding using the manual metal arc welding process - nickel alloys...91

8 Skill Set MTA044 Aircraft welding using the manual metal arc welding process - copper based alloys...92 Skill Set MTA045 Aircraft welding using the manual metal arc welding process - titanium alloys...92 Skill Sets for NDT Authorisations...94 Skill Set MTA046 Liquid penetrant inspection approval for aerospace...94 Skill Set MTA047 Magnetic particle inspection approval for aerospace...94 Skill Set MTA048 Eddy current inspection approval for aerospace...95 Skill Set MTA049 Ultrasonic inspection approval for aerospace...96 Skill Set MTA050 Radiographic inspection approval for aerospace...96 Skill Set MTA051 Basic visual liquid dye penetrant inspection approval for aerospace...97 Skill Set MTA052 Basic magnetic particle inspection approval for aerospace...98 Skill Set MTA053 Basic eddy current inspection approval for aerospace...98 Skill Set MTA054 Ultrasonic thickness testing inspection approval for aerospace...99 Skill Set MTA055 Basic radiographic inspection approval for aerospace...99 Skill Sets for Aircraft Component Electroplating Authorisations Skill Set MTA056 Electroplate aeronautical product component parts Skill Set MTA057 Produce anodised film on aluminium alloy Skill Set MTA058 Metal spray aeronautical product component parts Skill Sets for Aircraft Machining Authorisations Skill Set MTA059 Machine aeronautical product component parts (general) Skill Set MTA060 Grind aeronautical product component parts Skill Set MTA061 Precision jig boring of aeronautical product component parts Skill Set MTA062 Complex milling of aeronautical product component parts Skill Set MTA063 Machine aeronautical product component parts using horizontal and/or vertical boring machines Skill Set MTA064 Machine aeronautical product component parts using NC/CNC machines Skill Set MTA065 Machine aeronautical product component parts using NC/CNC machining centres Skill Set MTA066 Machine plastic aeronautical product component parts Skill Set MTA067 Aeronautical product component parts metal spinning lathe operations Skill Sets for Aircraft Tyre Retreading Authorisations Skill Set MTA068 Aircraft tyre retreading (basic) Skill Set MTA069 Aircraft tyre retreading (advanced) SECTION Skill Sets for small aircraft licences Skill Set SAL001 B1 small aircraft elementary Skill Set SAL002 Mechanical/Avionic B1and B2 Electrical systems multi-generator Rating Skill Set SAL003 Mechanical B1.2 Wooden structures - Rating Skill Set SAL004 Mechanical B1.2 Fabric surfaces - Rating Skill Set SAL005 Mechanical B1 Hydraulic systems - Rating Skill Set SAL006 Mechanical B1 Vapour cycle air conditioning systems -Rating 6A Skill Set SAL007 Mechanical B1.1 and B1.3 Air cycle air conditioning systems - Rating 6B Skill Set SAL008 Mechanical/Avionics B1 and B2 Oxygen systems Rating Skill Set SAL009 Mechanical B1.1 and B1.2 Pressurisation and pneumatic systems Rating

9 Skill Set SAL010 Mechanical B1.3 and B1.4 Helicopter powered flight control systems Rating Skill Set SAL011 Mechanical B1 Boosted Induction Systems - Rating S Skill Set SAL012 Mechanical B1.2 Constant speed and variable pitch propeller - Rating V Skill Set SAL013 Avionics B2 Electrical 1 Rating Skill Set SAL014 Avionics B2 Instrument 1 Rating Skill Set SAL015 Avionics B2 Radio 1 Rating Skill Set SAL016 Avionics B2 Autopilot and flight control systems Aeroplane Rating Skill Set SAL017 Avionics B2 Autopilot and flight control systems Helicopter - Rating Skill Set SAL018 Avionics B2 Glass cockpit - Rating Skill Set SAL019 Avionics B2 Navigation systems Rating Skill Set SAL020 Avionics B2 Flight management systems Rating Skill Set SAL021 Avionics Inertial navigation systems - Rating Skill Set SAL022 Avionics B2 Secondary radar - Rating Skill Set SAL023 Avionics B2 Weather radar - Rating Skill Set SAL024 Avionics B2 Cockpit voice recorder - Rating Skill Set SAL025 Avionics B2 Flight data recorder systems - Rating Skill Set SAL026 Avionics B2 High frequency radio systems - Rating Skill Set SAL027 B1.1 Removal of small aircraft limitation Skill Set SAL028 B1.3 Removal of small aircraft limitation Skill Set SAL029 B2 Removal of small aircraft limitation Skill Set SAL030 of a B1.2 licence by holders of a B1.1 small aircraft licence Skill Set SAL031 of a B1.3 licence by holders of a B1.1 small aircraft licence Skill Set SAL032 of a B1.4 licence by holders of a B1.1 small aircraft licence Skill Set SAL033 of a B1.1 small aircraft licence by holders of a B1.2 licence Skill Set SAL034 of a B1.3 small aircraft licence by holders of a B1.2 licence Skill Set SAL035 of a B1.4 licence by holders of a B1.2 licence Skill Set SAL036 of a B1.1 small aircraft licence by holders of a B1.3 small aircraft licence Skill Set SAL037 of a B1.2 licence by holders of a B1.3 small aircraft licence Skill Set SAL038 of a B1.4 licence by holders of a B1.3 small aircraft licence Skill Set SAL039 of a B1.1 small aircraft licence by holders of a B1.4 licence Skill Set SAL040 of a B1.2 licence by holders of a B1.4 licence Skill Set SAL041 of a B1.3 small aircraft licence by holders of a B1.4 licence

10 SECTION 1 Aviation Maintenance Workshop Skill Sets The Skill Sets in this section have been developed as a means of qualifying individuals from allied trades to work in specific areas of aircraft component repair and overhaul and gain applicable task approvals under both the CASA and ADF regulatory systems. They could also be used to qualify individuals with Aeroskills AME qualifications to work on component repair and overhaul. Allied trades are as follows: Allied trades related to avionic and electrical component work are electro-technology, telecommunications and automotive. A metals and engineering background may also qualify where competencies held and work experience is in the electrical and/or electronic fields. Allied trades related to mechanical component work are automotive and metals and engineering where competencies held and work experience is in mechanical fields. Many of the units of competency listed in the Skill Sets have the following common core Aeroskills units as prerequisites: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation processes MEA107 Interpret and use aviation industry manuals and specifications MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation Much of the general content in these units is also covered by units that will be held by individuals in allied trades. To facilitate the movement of such individuals to aviation component workshop employment the parts of these units that are peculiar to Aeroskills have been identified and have been included in MEA145 Conversion from allied trades for employment in aviation workshops which is listed in each Skill Set. Through attainment of MEA145 individuals may be deemed to be competent in each of the listed common core units. Avionics Skill Set AMW001 Electrical component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electrical component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA Skill Sets Companion Volume Release 2, July 2015 Page 10 of 125

11 MEA201 MEA246 MEA260 MEA261 MEA262 MEA286 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft electrical/electro-mechanical The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electrical component repair and overhaul. Skill Set AMW002 Mechanical and electro-mechanical instrument component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on mechanical and electro-mechanical instruments repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 Fabricate and/or repair aircraft electrical hardware or parts MEA252 Test, align and troubleshoot synchro and servo system MEA260 Use electrical test equipment MEA261 MEA262 MEA284 Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft instrument system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on mechanical and electro-mechanical instruments repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 11 of 125

12 Skill Set AMW003 Aircraft display, control and distribution system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft display, control and distribution system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA201 MEA246 MEA252 MEA260 MEA261 MEA262 MEA283 Conversion from allied trades for employment in aviation workshops Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Test, align and troubleshoot synchro and servo system Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft display, control and distribution system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on display, control and distribution system component repair and overhaul. Skill Set AMW004 Oxygen system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on oxygen system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA287 Repair or overhaul aircraft oxygen system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on oxygen system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 12 of 125

13 Skill Set AMW005 Aircraft radio frequency communication and navigation system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft radio frequency communication and navigation system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 MEA246 MEA260 MEA261 MEA262 MEA285 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft radio frequency communication and navigation system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on radio frequency communication and navigation system component repair and overhaul. Skill Set AMW006 Aircraft pulse system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft pulse system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 MEA260 MEA261 MEA262 Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards MEA282 Repair or overhaul aircraft pulse system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. MEA Skill Sets Companion Volume Release 2, July 2015 Page 13 of 125

14 requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on pulse system component repair and overhaul Skill Set AMW007 Aircraft audio and visual system and reproducer repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on audio and visual system and reproducer repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 MEA246 MEA260 MEA261 MEA262 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards MEA288 Repair or overhaul aircraft audio and visual systems and reproducers The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on audio and visual system and reproducer repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 14 of 125

15 Mechanical Skill Set AMW008 Hydraulic system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on hydraulic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA380 Repair and/or overhaul aircraft hydraulic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on hydraulic system component repair and overhaul Skill Set AMW009 Electro-hydraulic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electro-hydraulic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA201 MEA246 MEA260 MEA380 Conversion from allied trades for employment in aviation workshops Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Repair and/or overhaul aircraft hydraulic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electro-hydraulic component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 15 of 125

16 Skill Set AMW010 Pneumatic system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on pneumatic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA381 Repair and/or overhaul aircraft pneumatic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on pneumatic system component repair and overhaul Skill Set AMW011 Electro-pneumatic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electro-pneumatic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 MEA260 Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment MEA381 Repair and/or overhaul aircraft pneumatic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electro-pneumatic component repair and overhaul. Skill Set AMW012 Fuel system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on fuel system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 16 of 125

17 Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA382 Repair and/or overhaul aircraft fuel system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment in aircraft component workshops on fuel system component repair and overhaul. Skill Set AMW013 Gas turbine engine air inlet and compressor module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine air inlet and compressor module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA383 Repair and/or overhaul gas turbine engine air inlet and compressor and/or modules The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine air inlet and compressor module/component repair and overhaul. Skill set AMW014 Gas turbine engine combustion section module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine combustion section module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA384 Conversion from allied trades for employment in aviation workshops Repair and/or overhaul gas turbine engine combustion section and/or modules MEA Skill Sets Companion Volume Release 2, July 2015 Page 17 of 125

18 The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine combustion section module/component repair and overhaul. Skill Set AMW015 Gas turbine engine turbine and exhaust module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine turbine and exhaust module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA385 Repair and/or overhaul gas turbine engine turbine and exhaust section The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine turbine and exhaust module/component repair and overhaul. Skill Set AMW016 Gas turbine engine ancillary section module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine ancillary section module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA386 Repair and/or overhaul gas turbine engine ancillary section The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component MEA Skill Sets Companion Volume Release 2, July 2015 Page 18 of 125

19 workshops on gas turbine engine ancillary section module/component repair and overhaul. Skill Set AMW017 Piston engine disassembly for repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft piston engine disassembly for repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA392 Disassemble aircraft piston engines The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine disassembly. Skill Set AMW018 Repair and/or overhaul aircraft piston engine cylinder assembly Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on the repair and overhaul of aircraft piston engine cylinder assembly. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA393 Repair and/or overhaul aircraft piston engine cylinder assembly The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine cylinder assembly component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 19 of 125

20 Skill Set AMW019 Repair and/or overhaul aircraft piston engine crankcase assembly Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on the repair and overhaul of aircraft piston engine crankcase assembly. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA394 Repair and/or overhaul aircraft piston engine crankcase assembly The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine crankcase assembly component repair and overhaul. Skill Set AMW020 Reassemble aircraft piston engines Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on reassembly of aircraft piston engines. Units MEA108 Complete aviation industry documentation MEA145 MEA395 Conversion from allied trades for employment in aviation workshops Reassemble aircraft piston engines The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine repair and overhaul. Skill Set AMW021 Assemble aircraft piston engine quick engine change unit Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on assembly of aircraft piston engine quick engine change units. MEA108 Complete aviation industry documentation MEA Skill Sets Companion Volume Release 2, July 2015 Page 20 of 125

21 Units MEA145 Conversion from allied trades for employment in aviation workshops MEA396 Assemble aircraft piston engine quick engine change unit The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on assembly of piston engine quick engine change units. Skill Set AMW022 Test aircraft piston engines after repair or overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on testing of aircraft piston engines after repair or overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA392 Disassemble aircraft piston engines MEA393 Repair and/or overhaul aircraft piston engine cylinder assembly MEA394 Repair and/or overhaul aircraft piston engine crankcase assembly MEA395 Reassemble aircraft piston engines MEA396 Assemble aircraft piston engine quick engine change unit MEA397 Test aircraft piston engines after repair or overhaul The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on testing of piston engines after repair or overhaul. Skill Set AMW023 Propeller repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on propeller repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA389 Repair and/or overhaul propellers MEA Skill Sets Companion Volume Release 2, July 2015 Page 21 of 125

22 The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on propeller repair and overhaul. Skill Set AMW024 Rotary wing dynamic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on rotary wing dynamic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA390 Conversion from allied trades for employment in aviation workshops Repair and/or overhaul rotary wing dynamic The Aeroskills Training Package MEA11 offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on rotary wing dynamic component repair and overhaul. Skill Set AMW025 Mechanical system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on mechanical system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA391 Repair and/or overhaul aircraft mechanical system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on mechanical system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 22 of 125

23 Skill Set AMW026 Composite structure Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on composite structural component repair and overhaul. Units MEA101 Interpret work health and safety practices in aviation MEA103 MEA105 MEA107 MEA108 MEA109 MEA401 MEA405 Plan and organise aviation work activities Apply quality standards applicable to aviation processes Interpret and use aviation industry manuals and specifications Complete aviation industry documentation Perform basic hand skills, standard trade practices and fundamentals in aviation Inspect aircraft structures Repair/modify aircraft composite material structure/ The MEA Aeroskills Training Package offers these units as part of a Certificate IV in Aeroskills (Structures). requirements of CASA for the grant of an approval to perform on aircraft composite structures. MEA Skill Sets Companion Volume Release 2, July 2015 Page 23 of 125

24 SECTION 2 AIRCRAFT MAINTENANCE ENGINEER LICENCE SKILL SETS Skill Sets for Removal of B1 and B2 Licence Exclusions In the process of transitioning from the CAR 31 aircraft engineer licensing system to the new CASR Part 66 system many existing CAR 31 licence holders have been granted a B1 or B2 licence with a range of exclusions. To provide a mechanism for the removal of these exclusions, the Skill Sets in this Section have been developed in consultation with CASA. For the purpose of exclusion removal, they must be delivered by RTOs that also hold Maintenance Training Organisation status under CASR Part 147. CASA has also issued Airworthiness Advisory Circular AAC 9-66 in which it has been specified that CASA regards the grant of a B1 or B2 licence as signifying that all competencies relating to the specific licence privileges granted are held by the individual. Under these provisions, all holders of a B1 licence may be deemed to hold the following units of competency: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation MEA107 Interpret and use aviation industry manuals and specifications MEA108 Complete aviation industry documentation MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation MEA301 Perform aircraft flight servicing All holders of a B2 licence may be deemed to hold the following units of competency: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation MEA107 Interpret and use aviation industry manuals and specifications MEA108 Complete aviation industry documentation MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 Fabricate and/or repair aircraft electrical hardware or parts MEA260 Use electrical test equipment For this reason, the above units are not listed against the Skill Sets where they are specified as prerequisites for listed units. Where any RPL action is required with regard to any of the units of competency listed in the Skill Sets in this Section, RTOs are encouraged to undertake an efficient RPL assessment (in line with CASA guidance in AAC9-66) to determine required gap training (if any) in order to provide an integrated learning program for the units in the applicable Skill Set. MEA Skill Sets Companion Volume Release 2, July 2015 Page 24 of 125