TO BE FILLED BY THE ATO TRAINING STAFF

Transcription

1 Direction ersonnels Navigants ôle examens TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES (A) Applicant Last name(s)*: First name(s)*: Date of birth: Type of licence held: Licence number: State of licence issue: If applicable, this form is also the certificate of completion of the type rating course for ZFTT. Skill test roficiency check: Skill test: 1 Theoretical training for the issue of a type rating performed during period (if relevant) From: To: ATO: ark obtained % (ass mark 75%): Signature of HT: 2 FSTD training (if relevant) FSTD (aircraft type): HT Type and number of licence: Name(s)*: Three or more axes: No Yes Ready for service and used: FSTD manufacturer: otion or system: Visual aid: Yes No FSTD operator: Total training time at the controls: Location, date and time: Type rating instructor Name(s)*: FSTD ID code: Instrument approaches at aerodromes to a decision altitude or height of: Type and number of licence: Synthetic flight instructor Signature of instructor: 3 Flight training : in the aircraft in the FSTD (for ZFTT) Type of aircraft: Registration: Flight time at the controls: Take-offs: Take-off time: Location and date: Type rating instructor Name(s)*: Revalidation Renewal Type of test: 4 ATO informations Landings: Type Rating: Type and number of licence held: Training aerodromes or sites (take-offs, approaches and landings): Landing time: Signature of instructor: Only in case of initial rating or renewal of expired rating: IR Revalidation Renewal CAT-II/III (if relevant) Licence Skill test ATL(A) L(A) TO BE FILLED BY THE ATO TRAINING STAFF The ATO confirms that the candidate has been trained according to the approved syllabus and assures the level of proficiency required. ATO name: Name of head of training*: Location & date: Signature of head of training & ATO stamp: *In capital letters: DGAC/EASA EASA art FCL Appendix 9 01/09 Registration number: Licence number: ARIS CEDEX 15

2 Direction ersonnels Navigants ôle examens 5 Skill test and proficiency check details: Revalidation of TR only: 10 route sectors Or 1 route sector with an examiner Or combined LC/OC acc. to FCL 740.A (a)(3) Date of exam first attempt: Aerodrome or site: SI or aircraft registration: Date of exam second attempt: Aerodrome or site: SI or aircraft registration: Take-off time: Landing time: Total flight time: Total flight time: TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES TR IR ATL(A) L(A) ass Examiner s certificate number: artial ass** ** I have received information from the applicant regarding his/her experience and instruction and found that experience and instruction complying with the applicable requirements in art FCL. I confirm that all the required manoeuvres and exercises have been completed as well as information on the verbal theorecal knowledge examination when applicable. I confirm that in the event of a partial pass or fail I must not exercise the privileges of the rating until a full pass has been obtained. Applicant name(s)* and signature: *In capital letters: 6 Remarks ass artial ass** In case of artial ass or ** CAT-II/III ass ** Examiner s name(s)* and signature: TR IR ATL(A) L(A) CAT-II/III Examiner s certificate number: Type and licence number : ass ass ass ** ** ** European IR/BN ass ** European IR/BN ass ** Type and licence number : Validation of European IR/BN I confirm that all requirements for validation of IR/BN have been checked and completed according to the the instructions given on pages 3 and 4 of this form. **Give reasons and detail any further training: I have received information from the applicant regarding his/her experience and instruction and found that experience and instruction complying with the applicable requirements in art FCL. I confirm that all the required manoeuvres and exercises have been completed as well as information on the verbal theorecalknowledge examination when applicable. Validation of European IR/BN Examiner s name(s)* and signature: I confirm that all requirements for validation of IR/BN have been checked and completed according to the the instructions given on pages 3 and 4 of this form. DGAC/EASA EASA art FCL Appendix 9 02/ ARIS CEDEX 15

3 Direction ersonnels Navigants ôle examens VALIDATION OF EUROEAN IR/BN INSTRUCTION TO EXAINERS Valid from 25/08/2017 until 25/08/2018 Introduction Following the enforcement of EU 2016/539 regulation (training checking of pilots for BN operations), the purpose of this note is to provide examiners (especially non-french examiners ) with proper instruction to conduct the assessment of pilots holding an EASA licence administrated by France for transition to European IR/BN. It is reminded that European IR/BN will be mandatory (and be recorded in the licence) to operate BN classified airspaces or BN approaches procedures latest from 25/08/2018. The procedure described thereafter will enable examiners to deliver the European IR/BN : to pilots having attended an EASA approved BN course in an ATO, or to pilots holding a RNAV/GNSS course certificate provided by an EASA approved ATO or an European Airline (grandfathering procedure) rocedure for Grandfathering During the transition period (from 25/08/2017 until 25/08/2018) French licence holders are eligible for validation of European IR/BN during their LC, provided they : 1. can justify to their examiner having completed a RNAV/GNSS course by providing a certificate delivered by an EASA approved ATO or an European AOC operator, 2. answer to an 8 questions oral questionnaire during the briefing prior to the LC session, 3. are assessed as competent when performing at least one 2D or one 3D approach based on GNSS during the flight/fstd session of the LC. All 3 items above must be covered Note 1: the certificate stated in (1) has no formal defined format. It must clearly state that the applicant has been trained (theoretical course + in-flight/fstd training) in operating RNAV/GNSS procedures, especially RN GNSS approaches (such training is mandatory as per ORO.FC.230 for airlines operating RNAV/GNSS approaches). Once checked, the certificate is to stay with the holder. reparation of the applicant for the oral questionnaire It is highly advisable that applicants self-prepare themselves for the oral examination. For this purpose, they can study any updated and detailed document on the subject (the list of training objectives is detailed in AC7 FCL.615(b) part area navigation systems, RNAV/FS ). Normally, knowledge and guidance included in the Operator anual should be sufficient. Note that DGAC provides a comprehensive BN guide (in French language) downloadable on: rocedure for the validation of European IR/BN for pilots not holding a RNAV/GNSS course certificate (not eligible for grandfathering) These pilots must attend an approved BN course in an EASA approved ATO (ground + flight/fstd training + checking). DGAC/EASA EASA-FCL Appendix 9 03/ ARIS CEDEX 15

4 Direction ersonnels Navigants ôle examens aperwork to be completed by examiner for the validation of European IR/BN From 25/08/2017 and after having conducted the evaluation as described above (grandfathering procedure), the examiner shall either: Tick the corresponding box on the paper Training and Report Form for LC, or For examiner having access to the internet system SIGEBEL, tick the corresponding box on the test record page. Note: it is mandatory to use the latest version of the French TRF (training and report form) including the corresponding tick-box. It is downloadable on DGAC website. Reminder: only examiners administrated by France are entitled to write on the licence of the holder of an EASA licence administrated by France (under conditions). Non-French examiners must only fill-in the TRF. The LC and the BN mention will be entered in the licence by a French licence officer. Examiners entitled to conduct IR/BN evaluation During the transition period (from 25/08/2017 until 25/08/2018), only EASA certified examiner are entitled to conduct the evaluation for validation of European IR/BN and only if they: hold an European IR/BN, or are trained in RNAV/GNSS procedures via the completion of a course provided by an EASA approved ATO or a European AOC operator Revalidation of IR/BN Once validated, IR/BN must be revalidated at each LC by the successful completion of either one 2D or one 3D approach based on GNSS. The examiner shall confirm the revalidation by ticking the corresponding box on the paper or electronic report form. Additional information to examiner concerning the oral questionnaire Examiners are requested to ask 8 questions. ass rate is 75% (6 good answers) Questions must cover both theoretical aspects of RNAV/BN (principles, parameters like accuracy, integrity, continuity, functionality, navigation specifications, designation of specifications especially the ones commonly used by the candidate in operations) and practical aspects (use of BN, SOs, EL practice, associated NOTAs, RN A technique, etc.). When preparing their questions, examiners can use the operator O and/or official documents like AC7 FCL.615(b) part area navigation systems, RNAV/FS and ICAO doc French readers can usefully refer to the comprehensive document mentioned earlier in this note. DGAC/EASA EASA-FCL Appendix 9 04/ ARIS CEDEX 15

5 Direction ersonnels Navigants ôle examens 6. ulti-pilot aeroplanes and single-pilot high performance complex aeroplanes: (a) The following symbols mean: = Trained as IC or Co-pilot and as F and NF for the issue of a type rating as applicable. X = Simulators shall be used for this exercise, if available; otherwise an aircraft shall be used if appropriate for the manoeuvre or procedure. # = The training shall be complemented by supervised aeroplane inspection. TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES (b) The practical training shall be conducted at least at the training equipment level shown as (), or may be conducted up to any higher equipment level shown by the arrow ( >). The following abbreviations are used to indicate the training equipment used: A FFS = Aeroplane = Full Flight Simulator FTD = Flight Training Device OTD = Other Training Devices (c) The starred items (*) shall be flown solely by reference to instruments. If this condition is not met during the skill test or proficiency check, the type rating will be restricted to VFR only. (d) Where the letter appears in the skill test or proficiency check column this will indicate the mandatory exercise. (e) An FFS shall be used for practical training and testing if the FFS forms part of an approved type rating course. The following considerations will apply to the approval of the course: (i) the qualification of the FFS or FNT II; (ii) the qualifications of the instructors; (iii) the amount of FFS or FNT II training provided on the course; and (iv) the qualifications and previous experience on similar types of the pilot under training. (f) anoeuvres and procedures shall include CC for multi-pilot aeroplane (...) (g) Not applicable (h) Not applicable (i) In case of a restricted type rating issued in accordance with FCL.720.A(e), the applicants shall fulfil the same requirements as other applicants for the type rating except for the practical exercises relating to the take-off and landing phases. (j) To establish or maintain BN privileges one approach shall be an RN ACH. Where an RN ACH is not practicable, it shall be performed in an appropriately equipped FSTD. DGAC/EASA EASA art FCL Appendix 9 05/ ARIS CEDEX 15

6 Direction ersonnels Navigants ôle examens anoeuvres/rocedures Note : Training shall include CC for each item, if O RACTICAL TRAINING FTD 2 OTD FTD + FFS A FNT2 Instructor initials when training completed Checked in FSTD A/C ATL/L/TYE RATING SKILL TEST OR ROF. CHECK 1 attempt 2 attempt ass ass SECTION 1 Insert examiner s initials only 1. Flight preparation 1.1 erformance calculation 1.2 Aeroplane external visual inspection; location of each item and purpose of inspection # TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES 1.3 Cockpit inspection 1.4 Use of checklist prior to starting engines, starting procedures, radio and navigation equipment check, selection and setting of navigation and communication frequencies 1.5 Taxiing in compliance with air traffic control or instructions of instructor 1.6 re-flight checks SECTION 2 2. Take-offs 2.1 Normal take-offs with different flap settings, included expedited take-offs 2.2* Instrument take-off; transition to instrument flight is required during rotation or immediately after becoming airborne 2.3 Crosswind take-off 2.4 Take-off at maximum takeoff mass (actual or simulated maximum take-off mass) 2.5 Take-offs with simulated engine failure Shortly after reaching V2 (in aeroplanes which are not certificated as transport category or commuter category aeroplanes, the engine failure shall not be simulated until reaching a minimum height of 500 ft above runway end. In aeroplanes having the same performance as a transport category aeroplane regarding take-off mass and density altitude, the instructor may simulate the engine failure shortly after reaching V2) OR 2.5.2* Between V1 and V2 2.6 Rejected take-off at a reasonable speed before reaching V1 SECTION 3 3. Flight manoeuvres and procedures 3.1 Turns with and without spoilers 3.2 Tuck under and ach buffets after reaching the critical ach number, and other specific flight characteristics of the aeroplane (e.g. Dutch Roll) 3.3 Normal operation of systems and controls engineer s panel X X an aircraft may not be used FFS only DGAC/EASA EASA art FCL Appendix 9 06/ ARIS CEDEX 15

7 Direction ersonnels Navigants ôle examens anoeuvres/rocedures Note : Training shall include CC for each item RACTICAL TRAINING FTD 2 OTD FTD + FFS A FNT2 Instructor initials when training completed Checked in FSTD A/C ATL/L/TYE RATING SKILL TEST OR ROF. CHECK 1 attempt 2 attempt ass ass 3.4 Normal and abnormal operations of following systems A mandatory minimum of 3 abnormal items shall be selected from to inclusive TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES Engine (if necessary propeller) ressurisation and air-conditioning ilot/static system Fuel system Electrical system Hydraulic system Flight control and Trim-system Anti-icing/de-icing system, Glare shield heating Autopilot/Flight director Stall warning devices or stall avoidance devices, and stability augmentation devices Ground proximity warning system, weather radar, radio altimeter, transponder Radios, navigation equipment, instruments, flight management system Landing gear and brake Slat and flap system Auxiliary power unit 3.6 Abnormal and emergency procedures A mandatory minimum of 3 abnormal items shall be selected from to inclusive Fire drills e.g. engine, AU, cabin, cargo compartment, flight deck, wing and electrical fires including evacuation Smoke control and removal Engine failures, shut-down and restart at a safe height Fuel dumping (simulated) Windshear at take-off/landing X FFS only Simulated cabin pressure failure/emergency descent Incapacitation of flight crew member (O only) Other emergency procedures as outlined in the Aeroplane Flight anual an aircraft TCAS event may not be used FFS only 3.7 Steep turns with 45 bank, 180 to 360 left and right 3.8 Early recognition and counter measures on approaching stall (up to activation of stall warning device) in take-off configuration (flaps in take-off position). In cruising flight configuration and in landing configuration (flaps in landing position, gear extended) Recovery from full stall or after activation of stall warning device in climb, cruise and X approach configuration DGAC/EASA EASA art FCL Appendix 9 07/ ARIS CEDEX 15

8 Direction ersonnels Navigants ôle examens anoeuvres/rocedures Note : Training shall include CC for each item OTD FTD FTD 2 + FNT2 RACTICAL TRAINING FFS A Instructor initials when training completed Checked in FSTD A/C ATL/L/TYE RATING SKILL TEST OR ROF. CHECK 1 attempt 2 attempt ass ass TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES procedures 3.9.1* Adherence to departure and arrival routes and ATC instructions 3.9.2* Holding procedures 3.9.3* 3D operations to DH/A of 200 feet (60 m) or to higher minima if required by the approach procedure Note: According to the AF, RN ACH procedures may require the use of autopilot or Flight director. The procedure to be flown manually shall be chosen taking into account such limitations (for example, choose an ILS for in case of such AF limitation) * anually, without director * With autopilot * anually, with one engine simulated inoperative; engine failure has to be simulated passing feet above aerodrome level until touchdown or through the complete missed approach procedure. In aeroplanes which are not certificated as transport category aeroplanes (JAR/FAR 25) or as commuter category aeroplanes (SFAR 23), the approach with simulated engine failure and the ensuing go-around shall be initiated in conjuction with the non-precision approach as described in The go-around shall be initiated when reaching the published obstacle clearance height (OCH/A), however not later than reaching a minimum descent height/altitude (DH/A) of 500 feet above runway threshold elevation. In aeroplanes having the same performance as a transport category aeroplane regarding take-off mass and density altitude, the instructor may simulate the engine failure in accordance with * 2D operations down to the DH/A * Circling approach under the following conditions minimum circling altitude/height in simulated IC Followed by : (b) circling approach to another used in item (a) Remark : if (a) and (b) are not possible due ATC, simulated low visibility pattern may be performed SECTION 4 4. issed Approach rocedures 4.1 Go-around with all engines operating* during a 3D operation on reaching decision height 4.2 Other missed approach 4.3* anually go-around with critical engine simulated inoperative after an instrument approach on reachind DH, DH, or At 4.4 Rejected landing at 15m (50 ft) above runway threshold and go-around SECTION 5 * * * * * skill test only 5. Landings 5.1 Normal landings* with visual reference established when reaching DA/H following an instrument approach operation 5.2 Landing with simulated an aircraft jammed horizontal stabiliser in may not any out-of-trim position be used DGAC/EASA EASA art FCL Appendix 9 08/ ARIS CEDEX 15

9 Direction ersonnels Navigants ôle examens anoeuvres/rocedures Note : Training shall include CC for each item RACTICAL TRAINING FTD 2 OTD FTD + FFS A FNT2 Instructor initials when training completed Checked in FSTD A/C ATL/L/TYE RATING SKILL TEST OR ROF. CHECK 1 attempt 2 attempt ass ass 5.3 Cross wind landings 5.4 Traffic pattern and landing without extended or with partly extended flaps and slats TRAINING AND REORT FOR ATL, L, SKILL TEST AND ROFICIENCY CHECK AEROLANES 5.5 Landing with critical engine simulated inoperative 5.6 Landing with two engines simulated inoperative (aeroplanes with 3 engines : the centre engine and the outboard engine as far as practicable according to data ofthe AF. Aeroplanes with 4 engines : two engines at one side) General remark : Special requirements for extension of a type rating for instrument approaches down to a decision height of less than 60m (200 ft) i.e. Cat II/III operations SECTION 6 6. Type rating for instrument approaches down to a decision height of less than 60m (200 ft) ( CAT II/III) The following manoeuvres and procedures are the minimum training requirements to permit instrument approaches down to a DH of less than 60m (200 ft). During the following instrument approaches and missed approach procedures all aeroplane equipment required for type certification of instrument approaches down to a DH of less than 60m (200 ft) shall be used. 6.1* Rejected take-off at a minimum authorised RVR 6.2* CAT II/III approaches. In simulated IC down to DH, using flight guidance system. Standard procedures shall be observed 6.3* Go-around from DH (the training also shall include a go-around due to (simulated) insufficient RVR, wind shear, aeroplane deviation in excess of approach limits for a successful approach, and ground/airborne equipment failure prior to reaching DH and, go-around with simulated airborne equipment failure. 6.4* Landings with visual reference established at DH. (auto-land if fitted) Note : CAT II/III operations shall be accomplished in accordance with the applicable air operations requirements. X FFS ONLY ATL ONLY skill test only FFS only ADDITIONAL ITES TO BE ASSESSED FOR ATL EXA * * ATL SKILL TEST ONLY ASS FAIL anagement of crew cooperation aintaining a general survey of the aircraft Setting priorities and making decisions in accordance with safety aspects and relevant rules and regulations appropriate to the operational situation, including emergencies DGAC/EASA EASA art FCL Appendix 9 09/ ARIS CEDEX 15