The Hamburger. by Benjamin Wing Will Bullock Ted Kocak

Size: px
Start display at page:

Download "The Hamburger. by Benjamin Wing Will Bullock Ted Kocak"

Transcription

1 The Hamburger by Benjamin Wing Will Bullock Ted Kocak December 6, 2008

2 Abstract The goal is to make a roller coaster that lasts fifteen seconds with a budget of forty dollars. The roller coaster should not take very long to set up and should not take up too much space. The roller coaster will move a small ball bearing though plastic tubing pretzel, onto a few inclined planes, into a funnel, and down a plastic tubing spiral. The potential energy is converted into kinetic energy, frictional energy, and collisions. It is not very exact and the time varies by about five seconds due to the funnel; ranging from twelve seconds to seventeen seconds. The roller coaster is very variable, but is close to the goal.

3 Introduction The roller coaster must fit within a.5 meter by.5 meter by.5 meter box and must be able to be set up within 30 seconds and must be safe in its running. The roller coaster is to be made from scratch from materials totaling no more than forty dollars. The goal is to take as close to exactly fifteen seconds as possible. The roller coaster must be self sufficient and cannot be influenced in any way once started. The roller coaster is to move any vessel, such as a ball bearing or small car. Design Process We began our design of the Hamburger with an intense session of brainstorming. Initially we were planning on using a tripod so we could raise the beginning height of the coaster. After further examining of the objectives, however, we realized that the use of a tripod would immediately put us over the $40 limit. We also realized that it would be unsteady and difficult to set up within the 30 second time period we were given. We decided the best track would be a bendable plastic tube. This would give us an easily maneuverable track. We also decided that adding a set of steps would add excitement and make the coaster more enjoyable to watch. We thought of using pegboard because of the simplicity of attaching other parts such as the tubing and step section. We also decided to use a funnel in an attempt to take more time. As we began building, we realized that we needed to build a support frame. After constructing the initial sections of the coaster, we attempted to add the funnel. This proved far more difficult than we had anticipated because it was so variable and unsteady. We decided to use a piece of string, wrapped around the funnel, to hold the funnel as steadily and horizontally as possible. This was somewhat helpful but still left room for improvement. After some testing of the coaster, we realized we were still short on time. Because of this, we decided to add a helix tube in order to add more time.

4 Design To begin our coaster a ball bearing is dropped into a stretch of clear plastic tubing at the upper portion of the track that contains the two loops, which are fastened to the pegboard frame by zipties at critical points. The clear plastic tubing is readily flexible which allowed us not only to see the progress of the coaster at all points of its ride but to shape the track to any desired angle or form as well. The rollercoaster is built upon a cube-like frame which not only gives the coaster added strength and stability but also allows for the height of the coaster to be effectively doubled via use of two simple hinges, a bolt, and another sheet of peg board. The upper portion of track must be at a constant acute angle (approximately held at 70 degrees), otherwise, the coaster will fail to ascend the first loop. This problem is dealt with by the use of a simple locking mechanism that is similar in nature to a pinlock. After finishing the upper portion the coaster will shoot from the tubing onto a slightly angled incline from which it will travel upwards along the length of the incline until its velocity is equal to zero at which point it will proceed downwards and drop onto the next ramp where a similar scenario plays out. It is worth noting that the inclines are outfitted with bumpers (both of which are attached to the pegboard by zipties) at the ends of each of the PVC pipe inclines so that the coaster will not deviate from its intended path of travel and off the track. The ball bearing then continues into a funnel that is anchored to the pegboard by two screws and a block of wood, which serves as a foundation for the funnel. The funnel is held at a relatively constant level angle to the pegboard by a piece of string, which wraps around the base of the funnel twice and is then tied to the cube frame. The coaster then drops into a spiral, which is constructed by stacking small blocks of wood in decreasing heights and fastening them with zip ties to the tube itself. The coaster will descend the spiral and come to a definite stop at the end of the tubing, as there is a small wad of paper placed there.

5 Results Trial The roller coaster takes anywhere from twelve to seventeen seconds: Time taken (seconds) As we began testing the coaster, we realized we had misjudged how quickly the ball bearing would pass through the different sections. It flew through the initial tubing loops and quickly passed through the step section. The funnel was the most variable part of the roller coaster, and it also takes the longest. This section could take anywhere between four and twelve seconds depending on what angle and velocity the ball bearing entered. The roller coaster itself is very hard to pinpoint. During the testing, the roller coaster took twelve seconds, and if we had used something other than the funnel it might have been a little easier to pin point. Conclusion In conclusion, we were able to complete the task given to us and completed a coaster with a 15 second runtime that was within the given parameters. We learned that even though you can plan out what you are going to do the end product usually comes out to be completely different. The main problem attributed to our coaster was its relatively unpredictable runtime which was anywhere from seconds but was usually close to the 15 second mark. We determined that this inconsistency in runtimes was primarily due to the funnel portion of the track which could range anywhere from 5-9 seconds while held level. Despite our best attempts to correct this issue, it still remains as the biggest failure of this coaster. However, despite the disappointing inconsistency, we learned many valuable team skills and I am still extremely impressed by our team s innovativeness and on the spot solutions. All in all, our teamwork and individual skills made our rollercoaster a success. References No references were used

6 Appendices Original Concept

7

Team Project 6: Design and Build a Roller Coaster. The Neon Nemesis

Team Project 6: Design and Build a Roller Coaster. The Neon Nemesis Team Project 6: Design and Build a Roller Coaster The Neon Nemesis Due: December 2, 2008 Justin Battenberg, Sara Evans, Nicholas Youst Abstract The purpose of this project is to design and build a roller

More information

Kiffin s Crazy Coaster

Kiffin s Crazy Coaster Kiffin s Crazy Coaster By Orazi s Angels Tyler Kiste, Cory Winters, Michael Dehart Abstract 1 This experiment looked to develop our abilities to work as a team and pushed us to apply the concepts that

More information

Project 6 Roller Coaster

Project 6 Roller Coaster Project6 RollerCoaster The Folded Paper Ramp/Tube Roller Coaster of Ultimate Domination 6 December 2008 Mohammad Salehi Jay Lockaby Kyle Elich Danny Holbert All members of this group have read and approve

More information

Team Shananigans: The Funnelcoaster

Team Shananigans: The Funnelcoaster Team Shananigans: The Funnelcoaster 12 2 08 Presented by: Leslie Roberts, Ben Hemphill, Ryan Burnett, Cori Crenshaw, Austen Webber ii Abstract: This project was assigned so that students could work together

More information

Engineering Fundamentals 151. Roller Coaster Project. December 2 nd, Wesley Jones. Chris Kibler. Ryan Moran. Evan Sutton

Engineering Fundamentals 151. Roller Coaster Project. December 2 nd, Wesley Jones. Chris Kibler. Ryan Moran. Evan Sutton 1 Engineering Fundamentals 151 Roller Coaster Project December 2 nd, 2008 Wesley Jones Chris Kibler Ryan Moran Evan Sutton 2 Each member has read and agreed upon the given format of this report. Abstract

More information

Eric Collins Ted Dorris Drew Ellis Will Glass. The Polar Express. 12/06/08 Reviewed by Eric Collins, Ted Dorris, Drew Ellis, and Will Glass

Eric Collins Ted Dorris Drew Ellis Will Glass. The Polar Express. 12/06/08 Reviewed by Eric Collins, Ted Dorris, Drew Ellis, and Will Glass Eric Collins Ted Dorris Drew Ellis Will Glass The Polar Express 12/06/08 Reviewed by Eric Collins, Ted Dorris, Drew Ellis, and Will Glass Abstract The objective of our team s project was to construct a

More information

Physics Is Fun. At Waldameer Park! Erie, PA

Physics Is Fun. At Waldameer Park! Erie, PA Physics Is Fun At Waldameer Park! Erie, PA THINGS TO BRING: Amusement Park Physics Bring a pencil Bring a calculator Don t forget to bring this assignment packet Bring a stop watch, a digital watch, or

More information

Everybody Dance Now. X Christopher Drinnon. X Danielle Karman. X Joey Moran. X Thomas Swearingen. X Robert Wilkins. Rollercoaster

Everybody Dance Now. X Christopher Drinnon. X Danielle Karman. X Joey Moran. X Thomas Swearingen. X Robert Wilkins. Rollercoaster TEAM C. & C. MUSIC FACTORY Everybody Dance Now Rollercoaster X Christopher Drinnon Christopher Drinnon X Danielle Karman Danielle Karman X Joey Moran Joey Moran X Thomas Swearingen Thomas Swearingen X

More information

Roller Coasters. Each team must successfully complete this challenge in order to be eligible for the final challenge and the prize.

Roller Coasters. Each team must successfully complete this challenge in order to be eligible for the final challenge and the prize. Roller Coasters Possible Materials Grey Water Pipe Insulation $5 per tubing, $5 for half (lengthwise) Duct Tape or Masking Tape $3 unlimited use of duct tape $2.50 for roll of masking tape Scissors $2

More information

Title ID Number Sequence and Duration. Age Level Essential Question Learning Objectives

Title ID Number Sequence and Duration. Age Level Essential Question Learning Objectives Title ID Number Sequence and Duration Age Level Essential Question Learning Objectives Lesson Activity Design a Roller Coaster (2 sessions, 60-80 minutes) HS-S-C3 Session 1: Background and Planning Lead

More information

Egg-streme Parachuting Flinn STEM Design Challenge

Egg-streme Parachuting Flinn STEM Design Challenge Egg-streme Parachuting Flinn STEM Design Challenge 6 07, Flinn Scientific, Inc. All Rights Reserved. Reproduced for one-time use with permission from Flinn Scientific, Inc. Batavia, Illinois, U.S.A. No

More information

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,

More information

Names of Lab Team Members. Scorpion Worksheet

Names of Lab Team Members. Scorpion Worksheet PRE-IB PHYSICS GROUP # Name: DEVIL PHYSICS Period: Date: BADDEST CLASS ON CAMPUS PHYSICS DAY AT BUSCH GARDENS General Guidelines: 1. Data collection is a group effort among your lab team. Completion of

More information

Section 2 Gravitational Potential Energy and Kinetic Energy 40,000 J. This is because that was the total mechanical energy at the beginning. Mechanical energy in this case is the sum of GPE and KE. When

More information

Design Challenge: Building a Roller Coaster

Design Challenge: Building a Roller Coaster Design Challenge: Building a Roller Coaster Focus: Students explore materials and tools then use the design process to build their own roller coasters. Specific Curriculum Outcomes Students will be expected

More information

Kings Dominion Coaster Mania Building Contest 2017

Kings Dominion Coaster Mania Building Contest 2017 Updated 1/28/17 1 Kings Dominion Coaster Mania Building Contest 2017 Kings Dominion is proud to introduce our Annual Roller Coaster Building Contest in conjunction with the 2017 Education Days to be held

More information

Zip-A-Dee-Doo-Dah. Grades: 4th and 5th Team Size: 1-3 competitors Duration: 30 minutes Supervisors: Anna Cronin, Tali Khain, Shwetha Rajaram

Zip-A-Dee-Doo-Dah. Grades: 4th and 5th Team Size: 1-3 competitors Duration: 30 minutes Supervisors: Anna Cronin, Tali Khain, Shwetha Rajaram Zip-A-Dee-Doo-Dah Grades: 4th and 5th Team Size: 1-3 competitors Duration: 30 minutes Supervisors: Anna Cronin, Tali Khain, Shwetha Rajaram Summary Description Given a few household materials, each team

More information

Roller Coasters! PRE READING TASK. Physics Gr11A

Roller Coasters! PRE READING TASK. Physics Gr11A Name: Class: Date: Roller Coasters! Grade 11A Science Related Reading/Physics Physics Gr11A A cat jumps over a fence. How does the dog s potential energy change on the way up? How does the dog s potential

More information

Wingsuit Design and Basic Aerodynamics 2

Wingsuit Design and Basic Aerodynamics 2 WINGSUIT DESIGN AND BASIC AERODYNAMICS 2 In this article I would like to expand on the basic aerodynamics principles I covered in my first article (Wingsuit Flying Aerodynamics 1) and to explain the challenges

More information

An Analysis of the Restraint Sufficiency of the Happijac Tie-Down System for Truck- Mounted Slide-In Campers

An Analysis of the Restraint Sufficiency of the Happijac Tie-Down System for Truck- Mounted Slide-In Campers Product Assessment Report October 2002 An Analysis of the Restraint Sufficiency of the Happijac Tie-Down System for Truck- Mounted Slide-In Campers Spencer P. Magleby, PhD Associate Professor of Mechanical

More information

THE AMAZING MAZE BY: EVAN WARNER TYLER BOLTON MATT LANE BEN GASTINEAU CHRIS SORRELLS

THE AMAZING MAZE BY: EVAN WARNER TYLER BOLTON MATT LANE BEN GASTINEAU CHRIS SORRELLS THE AMAZING MAZE BY: EVAN WARNER TYLER BOLTON MATT LANE BEN GASTINEAU CHRIS SORRELLS DECEMBER 3, 2008 Abstract Paragraph Hello there, we are team The Amazing Race. Our wonderful team of hard workers includes

More information

OWNER S MANUAL 10x10 SUN SHELTER WITH NETTING

OWNER S MANUAL 10x10 SUN SHELTER WITH NETTING OWNER S MANUAL 10x10 SUN SHELTER WITH NETTING L-GZ512PST-C 299-4560-2 IMPORTANT: Please read and follow all safety statements, warnings, assembly instructions, use & care directions before attempting to

More information

FibreGuard Closure with SLIDE-N-LOCK Fiber Management

FibreGuard Closure with SLIDE-N-LOCK Fiber Management DECEMBER 2008 FibreGuard Closure with SLIDE-N-LOCK Fiber Management PREPARATION Express Fiber Cable 1. From the expressed cable loop, identify and select the loose buffer tube with the fibers required

More information

ALEKO Victoria Series Retractable Awning Instructions for Installation and Operation

ALEKO Victoria Series Retractable Awning Instructions for Installation and Operation www.alekoproducts.com ALEKO Victoria Series Retractable Awning Instructions for Installation and Operation PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE! The owner s manual includes assembly and operating

More information

DO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below!

DO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below! SAFETY WARNING DO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below! Assumption of Risk Zip line construction and use can be dangerous. Ensure you

More information

MATH & SCIENCE DAYS STUDENT MANUAL

MATH & SCIENCE DAYS STUDENT MANUAL MATH & SCIENCE DAYS STUDENT MANUAL CONSCIOUS COMMUTING As you ride to Six Flags Great America be conscious of some of the PHYSICS on the way. A. STARTING UP THINGS TO MEASURE: As the bus pulls away from

More information

Paper Roller Coasters Engineering Journal. Name: Group: Period: Due date:

Paper Roller Coasters Engineering Journal. Name: Group: Period: Due date: Paper Roller Coasters Engineering Journal Name: Group: Period: Due date: Problem: You are a roller coaster manufacturer competing for a bid to build a roller coaster for an amusement park. Your task is

More information

Operation, Cleaning & Maintenance. For Aluminium Secondary

Operation, Cleaning & Maintenance. For Aluminium Secondary , Cleaning & Maintenance For Aluminium Secondary Contents Horizontal Sliders 3 Vertical Sliders - Non-Balanced 4 Vertical Sliders - Balanced 5 Vertical Sliders - Tilt Back 6-7 Lift Outs 8 Hinged Units

More information

Mazdaspeed6 Stage 1 Location 2 OCC Kit Install guide

Mazdaspeed6 Stage 1 Location 2 OCC Kit Install guide 1 Mazdaspeed6 Stage 1 Location 2 OCC Kit Install guide WARNING: By installing this Product, you understand that: The buyer/user assumes all risk as to quality, performance and use of these products and

More information

Energy and Roller Coasters

Energy and Roller Coasters 2ptsec printing Name Partners in this Project: Science Number: Group # Due _In Physics Lab Notebook Period Energy and Roller Coasters My dream rollercoaster Webquest Tasks Computer Engineer: Artistic Designer:

More information

ABS Model Background Stand

ABS Model Background Stand ABS Model Background Stand Product Overview: The completely redesigned Ravelli ABS model background stand is 10' tall by 12.3' wide. It is comprised of two tripod stands and four 3 cross bar sections and

More information

Table of Contents School Information 2 Note Page 3 Words of Physics 4 Gut Feelings at the Park 5 Helpful Formulas 6 Fun Facts 7 Heart Rate 8 Inverter

Table of Contents School Information 2 Note Page 3 Words of Physics 4 Gut Feelings at the Park 5 Helpful Formulas 6 Fun Facts 7 Heart Rate 8 Inverter Table of Contents School Information 2 Note Page 3 Words of Physics 4 Gut Feelings at the Park 5 Helpful Formulas 6 Fun Facts 7 Heart Rate 8 Inverter 9 Canyon Blaster 10-11 Extreme Ride Theater 12 BC Bus

More information

Model Roller Coaster Contest 2017

Model Roller Coaster Contest 2017 Model Roller Coaster Contest 2017 California s Great America is proud to offer you and your group, entry into this year s Model Roller Coaster Contest. To find out how you and your school can enter this

More information

Lesson 1: Rolling and moving with Science

Lesson 1: Rolling and moving with Science Question: How is science related to roller coasters? Interpret and apply Newton's three laws of motion. Describe phase transitions in terms of kinetic molecular theory Lesson 1: Rolling and moving with

More information

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8 Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555

More information

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver

More information

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly

More information

Coaster Creators. Science/Math Module. Grades 6-8

Coaster Creators. Science/Math Module. Grades 6-8 Science/Math Module Grades 6-8 By Virginia Barrett MAP Team Member Lathrop R-II School District Northwest Regional MAP Center 1 Purpose: This module can be used as the culminating activity for a unit of

More information

Important! You need to print out the 2 page worksheet you find by clicking on this link and take it with you to your lab session.

Important! You need to print out the 2 page worksheet you find by clicking on this link and take it with you to your lab session. 1 PHY 123 Lab 5 - Linear Momentum (updated 10/9/13) In this lab you will investigate the conservation of momentum in one-dimensional collisions of objects. You will do this for both elastic and inelastic

More information

Notes, Parts List & Drawings

Notes, Parts List & Drawings Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives

More information

Important! Read all of these instructions before assembling or riding the glider. For questions or help please call Glide Bikes at

Important! Read all of these instructions before assembling or riding the glider. For questions or help please call Glide Bikes at Go Glider Manual Congratulations on your purchase of the Go Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and maintenance

More information

PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes. يروحملا بابلا 轴门 PortasPivotantes

PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes. يروحملا بابلا 轴门 PortasPivotantes PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes يروحملا بابلا 轴门 PortasPivotantes -90 0 0 90 90 2 165 mm 143 mm 8 mm 4 5 6 7 8 9 10 11 12 13

More information

Developing a Functional Roller Coaster Optimizer. Ernest Lee. April 20, Abstract

Developing a Functional Roller Coaster Optimizer. Ernest Lee. April 20, Abstract Developing a Functional Roller Coaster Optimizer Josh Tsai Brigham Young University joshjtsai@gmail.com Ernest Lee Brigham Young University ernest.tylee@gmail.com April 20, 2017 Abstract Roller coasters

More information

(12) Patent Application Publication (10) Pub. No.: US 2007/ A1

(12) Patent Application Publication (10) Pub. No.: US 2007/ A1 US 2007 O152116A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2007/0152116 A1 Madsen (43) Pub. Date: Jul. 5, 2007 (54) BALL HEAD Publication Classification (76) Inventor: Larry

More information

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM

More information

American Airlines Next Top Model

American Airlines Next Top Model Page 1 of 12 American Airlines Next Top Model Introduction Airlines employ several distinct strategies for the boarding and deboarding of airplanes in an attempt to minimize the time each plane spends

More information

Alien Flier Zip Line Products Installation/Owner s Manual

Alien Flier Zip Line Products Installation/Owner s Manual Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Explorer Zip Line EZ Up Cable Kit Installation... 5 Xtreme Zip Line EZ Up Cable Kit Installation...

More information

ZIP LINE CHALLENGE. DESIGN CHALLENGE Build a device that can transport a ping-pong ball from the top of a zip line to the bottom in 4 seconds or less.

ZIP LINE CHALLENGE. DESIGN CHALLENGE Build a device that can transport a ping-pong ball from the top of a zip line to the bottom in 4 seconds or less. Grades 3 5, 6 8 20 60 minutes ZIP LINE CHALLENGE DESIGN CHALLENGE Build a device that can transport a ping-pong ball from the top of a zip line to the bottom in 4 seconds or less. SUPPLIES AND EQUIPMENT

More information

Integrated Science. 5. Working electromagnet start switch. [Must be designed so the person starting it does

Integrated Science. 5. Working electromagnet start switch. [Must be designed so the person starting it does Integrated Science 2015 Amusement Park Challenge Purpose: A land developer in Snohomish has decided to build an amusement park on farm land near the river. They have all their permits in place. Now they

More information

Table of Contents. Introduction to the AquaTrak AquaTrak Parts List Tank Frame Assembly Pulley System Assembly...

Table of Contents. Introduction to the AquaTrak AquaTrak Parts List Tank Frame Assembly Pulley System Assembly... 56679 V0309 Table of Contents Introduction to the AquaTrak................................................... 2 AquaTrak Parts List... 3 Tank Frame Assembly... 4 Pulley System Assembly... 6 AquaTrak Maintenance...10

More information

Single Line Tethered Glider

Single Line Tethered Glider Single Line Tethered Glider Sub-System Level Design Review Team P14462 Kyle Ball Matthew Douglas William Charlock Jon Erbelding Paul Grossi Sajid Subhani Team Introduction Team Member Major Sajid Subhani

More information

Scale Drawing of Roller Coaster

Scale Drawing of Roller Coaster Scale Drawing of Roller Coaster Worksheet #4 Name Directions: Below is a scale drawing of a portion of the Millennium Force, a roller coaster located in Cedar Point Amusement Park in Ohio. Answer the questions

More information

IMPETUS: Engineering Workbook Model Roller Coaster Competition

IMPETUS: Engineering Workbook Model Roller Coaster Competition IMPETUS: Engineering Workbook Model Roller Coaster Competition School and Team Information This information can be completed at any time before the roller coaster competition School Name: Coach s Name:

More information

Montana Canvas Tent Structure Design

Montana Canvas Tent Structure Design Montana Tech Library Digital Commons @ Montana Tech Proceedings of the Annual Montana Tech Electrical and General Engineering Symposium Student Scholarship 2016 Montana Canvas Tent Structure Design Eric

More information

ENGR : Roller Coaster Project

ENGR : Roller Coaster Project ENGR1182.01: Roller Coaster Project P. 1 Roller Coaster Project As part of the project in ENGR1182.01, your team will: Innovate, Design, Build, Document, Test a model roller coaster. To obtain these deliverables,

More information

Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual

Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit

More information

Roller Coaster Design

Roller Coaster Design Name: Group Members: Per: Due Date: Roller Coaster Design Introduction: The roller coaster is a great example of conversions between potential energy (stored energy) and kinetic energy (the energy of motion).

More information

Six Flags Great Adventure Physics Packet

Six Flags Great Adventure Physics Packet Great Adventure Packet 1 Six Flags Great Adventure Physics Packet Groups Members with Physics teacher s name: Great Adventure Packet 2 Equations Kinematics v = d/t v f = v i + at d = v i t + ½ at 2 v f

More information

Rolling with Roller Coasters

Rolling with Roller Coasters Rolling with Roller Coasters Grade Level: 6 Total Time Required: Two 50 minute class sessions Prepared By: Brenda Capobianco, Todd Kelley, Dana Ruggiero, and Chell Nyquist Sources: National Science Digital

More information

Six Flags. Great. Adventure. Physics. Packet

Six Flags. Great. Adventure. Physics. Packet Great Adventure Packet 0 Six Flags Great Adventure Physics Packet Groups Members - Physics teacher s name: Great Adventure Packet 1 Equations Kinematics v = d/t v f = v i + at d = v i t + ½ at 2 v f 2

More information

Step by Step Set Up Guide

Step by Step Set Up Guide lite Step by Step Set Up Guide 1 lifting lug Secure lifting lugs to a certified lifting sling. Stand and stabilize escape system under work platform. Position module with round lunette ring facing work

More information

Lashings. John R. Sanders Westshore CERT Turtle Clan Director, Camp Wyandot, FSR Assistant Scoutmaster Troop 204, North Olmsted, Ohio

Lashings. John R. Sanders Westshore CERT Turtle Clan Director, Camp Wyandot, FSR Assistant Scoutmaster Troop 204, North Olmsted, Ohio Lashings By John R. Sanders Westshore CERT Turtle Clan Director, Camp Wyandot, FSR Assistant Scoutmaster Troop 204, North Olmsted, Ohio Objectives To explain how to tie lashings and the knots needed to

More information

π H-3505 GARAGE CANOPY PARTS SAFETY uline.com TOOLS NEEDED 10' X 20' X 8'

π H-3505 GARAGE CANOPY PARTS SAFETY uline.com TOOLS NEEDED 10' X 20' X 8' π H-3505 GARAGE CANOPY 10' X 20' X 8' 1-800-295-5510 uline.com TOOLS NEEDED Safety Glasses Wrench or Socket 9/16" or 14mm Tape Measure Phillips Screwdriver Rubber Mallet PARTS Cables x 5 2-way Corner Foot

More information

--- BIG LEAGUE BATTING CAGE ---

--- BIG LEAGUE BATTING CAGE --- --- BIG LEAGUE BATTING CAGE --- BGLC-7500 Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-B Page 1 of 22 IMPORTANT NOTICE: 1. BEFORE

More information

Some of the numbered sections of the track are described to the right. The times correspond to a graph found on page 58.

Some of the numbered sections of the track are described to the right. The times correspond to a graph found on page 58. QUALITATIVE QUESTIONS If the track were stretch out so that it were entirely in a single plane, the profile would look like the diagram below. Some of the numbered sections of the track are described to

More information

Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master

Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master 1. Assembly instructions 2. Attaching the plastic coated steel cables on the Ultimate frame

More information

The Development and Analysis of a Wind Turbine Blade

The Development and Analysis of a Wind Turbine Blade ME 461: Finite Element Analysis Spring 2016 The Development and Analysis of a Wind Turbine Blade Group Members: Joel Crawmer, Edward Miller, and Eros Linarez Department of Mechanical and Nuclear Engineering,

More information

10 X 20 X 8 Dome Canopy

10 X 20 X 8 Dome Canopy 10 X 20 X 8 Dome Canopy Warning Keep all flame and heat sources away from this tent fabric. Refer to labels for flamability specification. It is not fire proof. The tent fabric will burn if left in continuous

More information

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER 1 TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM TK No. 30 CLEAT BENDER Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (920)-662-9966 Fax -

More information

NEWMAR SERVICE SCHOOL

NEWMAR SERVICE SCHOOL NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC

More information

You can also include elements from around the classroom, like tables, chairs, yardsticks, string, etc.

You can also include elements from around the classroom, like tables, chairs, yardsticks, string, etc. Prep: Arrange plenty of space in your room. The teachers may prefer to use the hallway for this activity. Cleanup: Allow 2 minutes near end of class for students to try each other s coasters. Then have

More information

Choose and complete the appropriate number of options in each category in order to add up to the required total. Example: = 15

Choose and complete the appropriate number of options in each category in order to add up to the required total. Example: = 15 TIJ 101 COURSE CULMINATING ACTIVITY PROJECT COASTER Choose and complete the appropriate number of options in each category in order to add up to the required total. Example: 5 + 10 = 15 % Value Total 5

More information

Safety Analysis of the Winch Launch

Safety Analysis of the Winch Launch Safety Analysis of the Winch Launch Trevor Hills British Gliding Association and Lasham Gliding Society ts.hills@talk21.com Presented at the XXVIII OSTIV Congress, Eskilstuna, Sweden, 8-15 June 26 Abstract

More information

TUTORIAL WATER ROCKET GLIDER

TUTORIAL WATER ROCKET GLIDER TUTORIAL WATER ROCKET GLIDER 1. What is a Water Rocket glider? Water Rocket glider is a rocket-cum-glider that uses water as a propellant and then glides in air. It gets its thrust from water. This thrust

More information

LEAP LEADERSHIP RESUME/INTERVIEW

LEAP LEADERSHIP RESUME/INTERVIEW FLIGHT ENDURANCE OVERVIEW Participants analyze flight principles with a rubber band-powered model aircraft. Participants have the opportunity to build, fly, and adjust (trim) a model to make long endurance

More information

Slide Clear - Moving Walls Frameless - Framed - Glass

Slide Clear - Moving Walls Frameless - Framed - Glass Slide Clear - Moving Walls Frameless - Framed - Glass Dynamic and Adaptable Walls and Partitions Slide Clear s flexible systems transform and connect spaces. We create indoor and outdoor partitions which

More information

PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY

PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY 3 ADJUSTING YOUR PEAK 3.1 ADJUSTING THE SITTING POSITION 3.2 ADJUSTING

More information

BigStack. Minimum Crossbar spread 24 For factory racks: Check fitlist notes, or Yakima.com for your vehicle s crossbar spread.

BigStack. Minimum Crossbar spread 24 For factory racks: Check fitlist notes, or Yakima.com for your vehicle s crossbar spread. BigStack Minimum Crossbar spread 24 For factory racks: Check fitlist notes, or Yakima.com for your vehicle s crossbar spread. HEAVY Duty strap (2x) PAD (4x) ADJUSTMENT KNOB (2x) T-BOLT (2x) BAIL (2x) BigStack

More information

MULTIPLE CHOICE QUESTIONS. Fig. 12.1

MULTIPLE CHOICE QUESTIONS. Fig. 12.1 12 Friction 68 MULTIPLE CHOICE QUESTIONS 1. Whenever the surfaces in contact tend to move or move with respect to each other, the force of friction comes into play (a) only if the objects are solid. (b)

More information

Airspace Complexity Measurement: An Air Traffic Control Simulation Analysis

Airspace Complexity Measurement: An Air Traffic Control Simulation Analysis Airspace Complexity Measurement: An Air Traffic Control Simulation Analysis Parimal Kopardekar NASA Ames Research Center Albert Schwartz, Sherri Magyarits, and Jessica Rhodes FAA William J. Hughes Technical

More information

HARD DOOR UPGRADE KIT

HARD DOOR UPGRADE KIT RV Accessories OWNER'S MANUAL HARD DOOR UPGRADE KIT FOR ADD-A-ROOM & BREEZEWAY SCREEN ROOMS THIS MANUAL SUPPLEMENTS THE ADD-A-ROOM INSTRUCTIONS TABLE OF CONTENTS First Time Assembly... 2 Assembling the

More information

How to Build Your Own Flour Mill and Sifter

How to Build Your Own Flour Mill and Sifter Prototype and plans developed by Hugo Gervais Custom Fabrication, North Hero, VT Materials List: How to Build Your Own Flour Mill and Sifter Quantity Materials 4 2 X 2 X 26 3 / 16 Square tubing 1 2 X 2

More information

Installation Guide: Round Trampoline

Installation Guide: Round Trampoline Trampolines & trampoline parts designed to survive in the harsh Oz climate. www.oztrampolines.com.au Installation Guide: Round Trampoline Safety Tips Here at Oz Trampolines we are passionate about your

More information

The Frugal Ergonomic Engineer. By Dr. Len Walsh

The Frugal Ergonomic Engineer. By Dr. Len Walsh The Frugal Ergonomic Engineer By Dr. Len Walsh The Real Problem Is People Come To A Complete Halt When It Comes To Ergonomics When there is no budget to remedy problems. Give up goals, expectations and

More information

Fiberglass 80 meter Vertical BASE

Fiberglass 80 meter Vertical BASE Fiberglass 80 meter Vertical - Revised: 2015-11-06 One antenna in use at K0MPH is a fiberglass 80 meter vertical. The supporting structure is made of fiberglass tubing but the radiation is from a wire

More information

Urea/Adblue Hose Reel

Urea/Adblue Hose Reel www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose

More information

Assembly. Step 3. Attach the safety bracket (7) to the Pivot ARM (6).

Assembly. Step 3. Attach the safety bracket (7) to the Pivot ARM (6). Assembly Step 1. A. Stand the base of the machine by separating the U-frames (1,2). Pull the Front and Rear U-Frames (1,2) as far apart from each other as possible. Then push down on the middle of the

More information

Alien Flier Zip Line Products Installation/Owner s Manual

Alien Flier Zip Line Products Installation/Owner s Manual Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Constructing your Zip Line Xtreme Models... 6 Installing your Alien Flier Trolley on an Existing

More information

User Guide. Tripod. flowtech 75 Tripod. Part No. V

User Guide. Tripod. flowtech 75 Tripod.  Part No. V User Guide Tripod flowtech 75 Tripod Part No. V4150-0001 EN www.vinten.com TM Copyright 2017 All rights reserved. Original Instructions: English All rights reserved throughout the world. No part of this

More information

INTERNAL SAFETY CABINETS

INTERNAL SAFETY CABINETS INTERNAL SAFETY CABINETS Class 3 Flammable Liquids Class 5.1 Oxidising Agents Class 5.2 Organic Peroxides Class 6 Toxic Substances Class 8 Corrosive Substances Pesticide Storage Cabinets Safe-T-Store Accessories

More information

You Must Be At Least This Tall To Ride This Paper. Control 27

You Must Be At Least This Tall To Ride This Paper. Control 27 You Must Be At Least This Tall To Ride This Paper Control 27 Page 1 of 10 Control 27 Contents 1 Introduction 2 2 Basic Model 2 2.1 Definitions............................................... 2 2.2 Commonly

More information

Forcible Entry Notebook

Forcible Entry Notebook Forcible Entry Notebook by Captain Robert Morris, L-28 Doors that Swing Toward You (Outward)--Part II Additional security may be installed on these doors by bolting a metal shield to protect the space

More information

SEATBOXES TEL: FAX: Maver s aim and focus for 2011 was to produce a truly modular system of seatboxes.

SEATBOXES TEL: FAX: Maver s aim and focus for 2011 was to produce a truly modular system of seatboxes. SEATBOXES PAGE 58-63 PAGE 64 PAGE 65-66 PAGE 67-71 MXi SEATBOX SERIES MX 250 & SPARES MXi MODULES & SPARES SEATBOX Maver s aim and focus for 2011 was to produce a truly modular system of seatboxes. Serious

More information

State Fair Field Trip

State Fair Field Trip State Fair Field Trip Each student must complete this and three of the other activities at the fair to receive credit. Student Name Teacher Key Questions - Quantitative As you ride to the fair grounds

More information

AND LOAD CANOPY RACK SPECIFICATIONS

AND LOAD CANOPY RACK SPECIFICATIONS 8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck

More information

Pre-lab questions: Physics 1AL CONSERVATION OF MOMENTUM Spring Introduction

Pre-lab questions: Physics 1AL CONSERVATION OF MOMENTUM Spring Introduction Introduction You have a summer job at Amtrak with a group examining the crash between two trains. Your supervisor wants you to calculate the results of two different cases. The first is a perfectly inelastic

More information

Installation Instructions for the Rolltec Physique XL Awning

Installation Instructions for the Rolltec Physique XL Awning Installation Instructions for the Rolltec Physique XL Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions of various

More information

MONTANA ACCESSORIES CATALOGUE

MONTANA ACCESSORIES CATALOGUE TOWARDS A FUTURE OF POSSIBILITIES MONTANA ACCESSORIES CATALOGUE P.O. Box 5598, Dubai, United Arab Emirates Tel: +971 4 8846146 Fax: +971 4 8846830 Toll-free Number (only UAE) 800-GULFEX Email: sales@gulfex.com

More information

2522 and 2523 Fiber Optic Splice Organizer Tray

2522 and 2523 Fiber Optic Splice Organizer Tray 2522 and 2523 Fiber Optic Splice Organizer Tray Instructions February 1996 Issue 1, 34-7039-6256-2 1 Table of Contents 1. General... 3 2. Kit Contents... 3 3. Available Kits and Accessories... 4 4. Tray

More information

MACO RAIL SYSTEMS SLIDING HARDWARE

MACO RAIL SYSTEMS SLIDING HARDWARE TECHNOLOGY IN MOTION MACO SLIDING HARDWARE For a harmonic confluence inside and out LIFT&SLIDE HARDWARE PVC Re-define non-enclosed area as floor space in harmony with nature: to take a breath, let in light

More information