MODEL # ARC-10 10ft x 6ft x 76in / 3.04m x 1.82m x 1.93m QTY DESCRIPTION PART NUMBER

Size: px

Start display at page:

Download "MODEL # ARC-10 10ft x 6ft x 76in / 3.04m x 1.82m x 1.93m QTY DESCRIPTION PART NUMBER"

Nelson Simpson
5 years ago
Views:

3380 N. El Paso St., Colorado Springs, CO 80907 Visit our website at www.letsgoaero.

93m QTY DESCRIPTION PART NUMBER FABRIC BODY: Arc Cover (tent body) Door Panel w/ mesh Connector Panel w/ buckles N/A PANL-MESH PANL-CONNECT 5 POLES & STRAPS: Saddle Poles, Fiberglass, shock-corded

attached TPOL-59BK TFPL-74.5BK BSPL-7.5CR64.5BK WEB/QCLIP-96CM 4 CARRY BAG: Carry bag - green UNIVERSAL PARTS: (Some attached to fabric) Pole Bag Stake Bag; 0.5in Guy Lines;.5M Guy Lines; 5.

1 3380 N. El Paso St., Colorado Springs, CO Visit our website at Tentris ArcHaus Owner s Manual For Assistance, please call or MODEL # ARC-0 0ft x 6ft x 76in / 3.04m x.8m x.93m QTY DESCRIPTION PART NUMBER FABRIC BODY: Arc Cover (tent body) Door Panel w/ mesh Connector Panel w/ buckles N/A PANL-MESH PANL-CONNECT 5 POLES & STRAPS: Saddle Poles, Fiberglass, shock-corded Tent Pole w/connector ferrules - black Spanner Poles, Fiberglass, shock-corded Tent Pole w/ C-clips - black Base U-Tube Poles, Steel, chain-corded base Tent Pole - black Web Strapping w/ quick clips attached TPOL-59BK TFPL-74.5BK BSPL-7.5CR64.5BK WEB/QCLIP-96CM 4 CARRY BAG: Carry bag - green UNIVERSAL PARTS: (Some attached to fabric) Pole Bag Stake Bag; 0.5in Guy Lines;.5M Guy Lines; 5.0M STAKES: Stake Set of ten, 7 in. steel stakes Stake Set of four, in steel stake CBAG-770OL PBAG-36IN SBAG-IN GROPE-.5M GROPE-5M SSET-0ST-7IN SSET-T0G-IN Review your parts list above to make sure all parts have been included in your package. For assistance, do NOT return product to store. Call Let s Go Aero: or Monday-Friday 8:30-5:00 pm MST. Mention your Model Number so our Representative may assist you. For additional product information and related accessories, visit our website:

ASSEMBLY INSTRUCTIONS Step : Frame Layout Proper Frame layout is essential to

(Qty: ) Base U-Tube Poles (Steel chained-corded base tent pole).

Step 3: Cover Install (Qty: 5) Spanner Poles, shock-corded (Tent pole with

(Qty: ) Arc Cover (Tent Body) - Lay Arc Cover inside Frame perimeter - Slide

Saddle tubing. - Repeat with the remaining four poles.

- Align U-Tube corner tubing in the cover s reinforced corners - Connect the

2 ASSEMBLY INSTRUCTIONS Step : Frame Layout Proper Frame layout is essential to make to sure the ArcHaus sets up correctly and to prevent damage. (Qty: ) Base U-Tube Poles (Steel chained-corded base tent pole). (Qty: ) Webbing Straps (Webbing with quick clips attached, length adjustable) Step 3: Cover Install (Qty: 5) Spanner Poles, shock-corded (Tent pole with C-Clips). (Qty: ) Arc Cover (Tent Body) - Lay Arc Cover inside Frame perimeter - Slide Spanner Pole under center of cover, lift cover and clip center pole onto Saddle tubing. - Repeat with the remaining four poles. Adjust Webbing Straps length for a tensioned fit for enhance structural strength and zipper support. Step : Arc Saddle Assembly Step 4: Position Fitted Cover - Align Cover seams with Saddle tubing to center cover. - Position ground fabric and bungee cord under and around U-Tube ends. - Align U-Tube corner tubing in the cover s reinforced corners - Connect the cord ring and bungee hook in each corner. The cord ring must be oriented to the inside of the Saddle Poles as shown in diagram below. (Qty: ) Saddle Poles, shock-corded (Tent Pole with connector ferrules) Connect Saddle Poles to each end of U-Tubes. Stand on Webbing Straps while inserting Saddle Poles.

Step 5: Connect and Engage Tension System - Clip ground fabric wrap to the Arc Cover. - Tension bungee on each end to draw Cover tightly and around the Arc Frame.

Zip on and off end panels of choice to inside zipper of Arc Cover at either or both sides. The ArcHaus may be used with or without the end panels.

3 Step 5: Connect and Engage Tension System - Clip ground fabric wrap to the Arc Cover. - Tension bungee on each end to draw Cover tightly and around the Arc Frame. Step 6: Attach Modular End Panels of Choice (Qty: ) Door Panels with screens. (Qty: ) Connector Panel with buckles. Zip on and off end panels of choice to inside zipper of Arc Cover at either or both sides. The ArcHaus may be used with or without the end panels. Be sure to stake the ArcHaus corners and use guy lines. Note that the outer zipper may be used for connecting two ArcHauses together with the ZipperMate option. Contact Let s Go Aero for purchasing information. Step 7: Stake the Guy Lines & Corners of the ArcHaus Locate the Guy Lines on all four sides of the tent. Untie the Guy Lines and loop it into a stake that is provided. Extend the Guy Line and drive the stake into the ground securing the Guy Line. Locate the loops at tent corners and drive the stakes supplied at each corner. In windy conditions, use more heavy-duty stakes for reinforcement. Available at your local retail outfitter or through Let s Go Aero. IMPORTANT NOTICE Always stake down tent to prevent wind pull. When using on pavement, use sand bags or comparable objects to anchor.

As a valued customer, your satisfaction is very important to us. We welcome your feedback and await your responses, suggestions, and recommendations. Email us via our service team: support@letsgoaero.

Obtaining a familiarity with the assembly and disassembly processes will help ensure your satisfaction and ease concerns you may have should you find yourself setting up in the dark or adverse

IMPORTANT NOTICE: You may compromise the original FIRE RETARDENCY and WATER REPELLENCY protective coatings when you apply sprays or other chemical treatments to your tent.

If you desire additional moisture protection, use a seam sealing compound ONLY; be sure to follow the manufacturer s directions.

4 As a valued customer, your satisfaction is very important to us. We welcome your feedback and await your responses, suggestions, and recommendations. us via our service team: support@letsgoaero.com WE ADVISE YOU TO ASSEMBLE THIS PRODUCT AT LEAST ONCE AT HOME BEFORE GOING ON A TRIP. Obtaining a familiarity with the assembly and disassembly processes will help ensure your satisfaction and ease concerns you may have should you find yourself setting up in the dark or adverse weather conditions. GET THE MOST ENJOYMENT FROM YOUR PRODUCT BY READING THIS OWNER S MANUAL THOROUGHLY; THEN FOLLOW OUR CAMPING SUGGESTIONS OUTLINED BELOW. IMPORTANT NOTICE: You may compromise the original FIRE RETARDENCY and WATER REPELLENCY protective coatings when you apply sprays or other chemical treatments to your tent. This fabric has been factory-treated and is HIGHLY WATER-REPELLANT; however, it is NOT WATERPROOF. All tents can experience seam leakage during wet weather. If you desire additional moisture protection, use a seam sealing compound ONLY; be sure to follow the manufacturer s directions. We recommend sealing your tent during your initial setup and prior to each camping season. Seam Sealer Compounds can be purchased at your local camping products retailer. THIS FABRIC IS NOT WATERPROOF! Your product s fabric is a synthetic material that has been treated and is not only highly-resistant to the sun s Ultraviolet (UV) light but also highly water-repellant in light rain conditions. Insure a successful and enjoyable camping experience by heeding the following tips: Keep objects from touching the inside, as objects will draw in moisture at the point of contact. Prep your product where necessary with a recommended seam sealing compound refer to the seam sealing information in DO NOT SPRAY section of this owner manual. Important: Prolonged exposure to sunlight that causes UV damage and/or the use of non-recommended foreign substances on synthetic material may damage the fabric properties and IS NOT COVERED BY THE LIMITED WARRANTY. OUR RECREATIONAL PRODUCTS ARE CONSTRUCTED USING CUSTOM SPECIFICATIONS. However, they are not engineered for extreme weather, climates or environments. Modification, abuse, and inclement or surprise weather conditions may make additional precautions necessary. Here are some tips should you find yourself preparing for adverse conditions: Make sure any guy lines/ropes on your structure are well-secured in the ground and lines/ropes are sufficiently taught between structure and stake; adjust where needed. Facing periods of heavy winds? Secure tent loops and guy lines/ropes with extra stakes and/or heavier-duty ones as necessary. Check the corners of the roof fabric and make sure roofline is properly positioned on framing. Use ALL provided methods of securing your fabric to its framing: nylon fastener strips, ties, and guy lines/ ropes where located. Storms or steady rains may collect in water pockets on the roofline. Water adds weight, and weight weakens the overall structure. Avoid possible collapse by maintaining a watchful eye and removing any water accumulation that may occur. WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS PRODUCT FABRIC. THIS FABRIC IS NOT FIREPROOF! It is made with flame resistant fabric, which meets CPAI-84 specifications. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the fabric may render the flame-resistant properties ineffective. Do NOT ERECT NEAR an open flame. NEVER use any fuel burning, oxygen consuming devices, or any device that produces fumes including, but not limited to: cooking stoves, lanterns, candles, hibachis, or heaters in or around your product. Inhalation of fumes may result in carbon monoxide poisoning, injury and/or death. Your product is NOT machine washable. Your product is NOT machine dryable. One of the easiest ways to damage your product is storing it while wet. If you must close camp in the rain, follow these guidelines carefully: As Soon As Possible: Open your product and ensure that every area of fabric is clean and completely dry before roll ing up for storage. If necessary, hang product outside or loosely drape over a ladder in your garage or spare room for a few days, turning it inside and out to prevent trapping pockets of water or debris. Use a soft brush to wipe away surface dirt. To clean your product: Hand wash using a mild dishwashing soap and softbristle brush, then allow the fabric to completely air dry. Don t neglect the frame: Wipe down all parts steel, plastic, and fiberglass - before putting away for next season s use. Salts from ocean air can and do affect damage if not dealt with as quickly as possible. Storing a wet fabric for as little as 4 hours in warm weather is likely to cause fabric to mildew. Once mildew sets in, the stains are permanent. Stains cannot be removed without potential harm to the fabric s coatings; chemicals or cleaning agents used to remove dirt and stains may irreversibly harm the fabric. Salts, mildew and other causes and subsequent effects are NOT covered under the limited warranty.

5 TROUBLESHOOTING GUIDE PROBLEM. CONDENSATION SOLUTION THIS IS CAUSED BY LOWER TEMPERATURES ON OUTSIDE OF PRODUCT COMBINED WITH BODY HEAT ON INSIDE OF PRODUCT. WHEN THIS OCCURS, AVOID TOUCHING WALLS TO REDUCE CONTACT LEAKAGE. LEAVING DOORS AND WINDOWS OPEN WILL REDUCE CONDENSATION.. MILDEW TO AVOID MILDEW, NEVER STORE YOUR PRODUCT WET OR DAMP. HOWEVER, IF MILDEW OCCURS, USE A SOFT BRISTLE BRUSH OR SPONGE WITH MILD SOAP TO CLEAN. LET DRY IN THE SUNLIGHT AND APPLY SEAM SEALER COMPOUND ON INSIDE SEAMS. 3. REPAIRING A TEAR FOR SMALL TEARS USE A SELF-ADHESIVE PATCH KIT OR POLYURETHANE BASED SEALER COMPOUND. WE RECOMMEND A REPAIR SHOP FOR LARGER TEARS. 4. FAULTY ZIPPER ALL OF OUR TENTS COME WITH SELF-REPAIRING NYLON COIL ZIPPERS. IF THE ZIPPER SEPARATES, YOU CAN MOVE THE SLIDER TO THE BEGINNING OF THE ZIPPER TAPE AND REWORK THE ZIPPER.LOCAL AW- NING AND UPHOLSTERY REPAIR SHOPS MAY BE ABLE TO ASSIST YOU. WARNING This Tent/Shelter has been developed and is intended to provide protection from sun and light rain. DO NOT use any gas or flame sources under or near this product. This product is NOT WATERPROOF. Excess water build-up can cause the frame system to become unstable, and collapse, causing injury. Any personal accessories or modifications to product should be removed before the onset of inclement weather such as heavy rain, wind, lightning, hail, snow, etc. This product should be completely dismantled to avoid permanent damage to product components and avoid any possibility of personal injury. This product is not a toy. This product is not designed for use by children without adult supervision. Under no circumstances should this product be used as a permanent or temporary storage facility for children s toys, garden tools, personal belongings or similar valuables. Consumer-made modifications for extended use, i.e. permanently securing to platforms and/or Consumer s failure to follow stated guidelines, will invalidate any Limited warranty, expressed or implied. Limited 6 Month Warranty If your product does not work properly because of a defect in materials or workmanship, Let s Go Aero Inc. will, for 6 months from the date of purchase, at its option either (a) repair our product with new or refurbished parts, or (b) replace it with a new product. The decision to repair or replace will be made by Let s Go Aero Incorporated. Let s Go Aero reserves the right to make substitutions to warranty claims if parts are unavailable or obsolete. If repair is needed during the limited warranty period, the purchaser will be required to furnish a sales receipt as proof of purchase indicating date of purchase, amount paid, and place of purchase. Product will not be covered under warranty due to damages resulting from misuse, excessive or abusive usage, and/or inclement weather conditions (i.e. windstorms, hurricanes, lightening storms, tornadoes). In such events, the consumer assumes cost of needed parts. Let s Go Aero Inc. is not responsible for normal wear and tear, zipper exhaustion, or the natural breakdown in materials that occurs with extended use. UNDER NO CIRCUMSTANCES SHALL LET S GO AERO INC BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN- TIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. LET S GO AERO INC EXPRESSLY EXCLUDES ALL WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion or limitation or implied warranties, so the above limitation may not apply to you. HOW TO OBTAIN WARRANTY SERVICE: Call Let s Go Aero at or during business hours. You must have a copy of your purchase receipt from an authorized dealer (or Let s Go Aero if purchased directly from us) as proof. The Tentris lines including the ArcHaus is patented. US Patent No. 8,00,987; patents pending.

Model # WMT-9920N Sport Dome Tent 9 ft. x 8 ft. x 48in.

T M CPOL-392OR TPOL-428BK Model # WMT-9920N Sport Dome Tent 9 ft. x 8 ft. x 48in. QTY. DESCRIPTION PART NUMBER 2 FABRIC BODY: Dome Tent Body POLES: Fiberglass, shock-corded Tent Pole- black; Fiberglass,