Stainless Steel Combined Drinking Fountain With Bottle Filler

Transcription

1 Stainless Steel Combined Drinking Fountain With Bottle Filler Product Code WH-DFBF-WRAS Stainless steel wall mounted drinking fountain with bottle filler spout. WRAS approved drinking water bubbler (tap) and WRAS approved swan neck bottle filler. WRAS is the Water Regulations Advisory Scheme and the water bubbler (tap) and bottle filler has been tested and approved to meet these requirements. The combined drinking fountain and bottle filler is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The drinking fountain / bottle filler has a radius front edge design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates an integral wall fixing bracket which allows the drinking fountain to be easily installed at adult or junior height. The combined drinking fountain with bottle filler comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, WRAS approved chrome plated bubbler valve and WRAS approved press button swan neck bottle filler. 32mm plastic bottle trap 32mm chrome plated bottle trap with waste pipe and wall flange.

2 Stainless Steel Drinking Fountain With WRAS Approved bubbler Product Code DFWH-WRAS Stainless steel wall mounted drinking fountain with WRAS approved drinking water bubbler (tap). WRAS is the Water Regulations Advisory Scheme and the water bubbler (tap) has been tested and approved to meet these requirements. The drinking fountain is manufactured from 1.6 thick satin polished stainless steel for durability and vandal resistance. The drinking fountain has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets which allow the drinking fountain to be easily installed at adult or junior height. The drinking fountain comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and WRAS approved chrome plated bubbler valve. 32mm plastic bottle trap 32mm chrome plated bottle trap with waste pipe and wall flange.

3 Wall Mounted Bottle Filler DFWH-CF Product Code DFWH-CF The wall mounted bottle filler is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The bottle filler has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets which allow the bottle filler to be easily installed at adult or junior height. The WRAS approved swan neck filler is operated by a press button and is suitable for filling bottles and cups. The bottle filler comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and chrome plated WRAS approved swan neck bottle filler valve and spout. The drinking fountain can be supplied with a drinking water bubbler valve instead of the swan neck bottle filler. Wall mounted drinking fountain with undershroud Combined drinking fountain and bottle filling station

4 Shrouded Drinking Fountain With WRAS Approved Bubbler Product Code DFWHS-WRAS The wall mounted shrouded drinking fountain is manufactured from 1.6 thick satin polished stainless steel for durability and vandal resistance. Supplied with WRAS approved drinking water bubbler (tap). WRAS is the Water Regulations Advisory Scheme and the water bubbler (tap) has been tested and approved to meet the water byelaws. The drinking fountain and undershroud has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets which allow the drinking fountain to be easily installed at adult or junior height. The undershroud has a removable access panel held in place with security screws. The drinking fountain comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and WRAS approved chrome plated bubbler valve. 32mm plastic bottle trap. Wall mounted drinking fountain. Combined drinking fountain and bottle filling station. Phone:

5 Wall Mounted Shrouded Bottle Filling Station Product Code DFWHS-CF The shrouded bottle filler is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The bottle filling station and undershroud has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets which allow the filling station to be easily installed at adult or junior height. The undershroud has a removable access panel held in place with security screws. The WRAS approved swan neck filler is operated by a press button and is suitable for filling bottles and cups. The shrouded bottle filler comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and WRAS approved chrome plated swan neck bottle filler valve and spout. The drinking fountain can be supplied with a drinking water bubbler valve instead of the swan neck bottle filler. Wall mounted drinking fountain. Combined drinking fountain and bottle filling station. Phone:

6 Coloured Drinking Fountain Stainless Steel Product Code DFWHC The drinking fountain is manufactured from 1.6 thick satin polished stainless steel for durability and vandal resistance. Finished with a heavy duty coloured finish baked on at 200 degrees for durability.white or black coloured finish as standard, other RAL or BS colours available The drinking fountain has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets which allow the drinking fountain to be easily installed at adult or junior height. The drinking fountain comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and standard NSF approved chrome plated bubbler valve. Optional cup / bottle filler instead of the bubbler valve. WRAS approved bubbler valve (tap) Wall mounted drinking fountain with undershroud Combined drinking fountain and bottle filling station.

7 Stainless Steel Drinking Fountain Junior Height Floor Standing Product Code DFFSJ-WRAS The junior height drinking fountain is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The floor standing junior height drinking fountain and undershroud has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall and floor fixing points which allow the drinking fountain to be easily installed. The undershroud is fully removable and held in place with security screws. The Drinking Fountain comes complete with integral wall fixings, 32mm flush grated waste fitting, WRAS approved chrome plated bubbler valve, and junior height shroud. Optional WRAS approved cup / bottle filler instead of the bubbler valve. Wall mounted drinking fountain. Wall mounted drinking fountain with undershroud. Phone:

8 Stainless Steel Drinking Fountain Adult Height Floor Standing Product Code DFFSA-WRAS The adult height drinking fountain is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The floor standing adult height drinking fountain and undershroud has a radius front design to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall and floor fixing points which allow the drinking fountain to be easily installed. The undershroud is removable and held in place with security screws. The drinking fountain comes complete with integral wall fixings, 32mm flush grated waste fitting, WRAS approved chrome plated bubbler valve, and adult height shroud. Optional WRAS approved cup / bottle filler instead of the bubbler valve. Wall mounted drinking fountain. Wall mounted drinking fountain with undershroud. Combined drinking fountain and bottle filling station. Phone:

9 Pedestal Drinking Fountain Stainless Steel Product Code DFPED-WRAS The pedestal drinking fountain is manufactured from 1.6mm thick satin polished stainless steel for durability and vandal resistance. The pedestal drinking fountain is a full height design mounted on a circular pedestal with a floor fixing plate which makes it suitable for use in school and public buildings. The drinking fountain comes complete with floor fixing plate, 32mm flush grated waste fitting, and WRAS approved chrome plated bubbler valve. Optional WRAS approved cup / bottle filler instead of the bubbler valve. Wall mounted drinking fountain with undershroud Combined drinking fountain and bottle filling station.

10 Stainless Steel Recessed Drinking Fountain Product Code DFR The recessed drinking fountain is manufactured from 1.2 thick satin brush polished stainless steel for durability and vandal resistance. The recessed drinking fountain is designed to be installed into the wall conceal the supply and waste pipework and to eliminate sharp corners and edges which makes it suitable for use in school and public buildings. The unit incorporates integral wall fixing brackets and can be easily installed at adult or junior height. The recessed drinking fountain comes complete with integral wall fixing brackets, 32mm flush grated waste fitting, and a flexible rubber bubbler valve. Wall mounted drinking fountain with undershroud

11 Stainless Steel Recessed Bottle Filler Station Product Code BFS Stainless steel recessed bottle filling station complete with press button valve, bottle filling spout and waste fitting. The recessed bottle filler station is manufactured from 1.6 thick satin polished stainless steel for durability and vandal resistance. The stainless steel wall recessed water bottle filling station is ideal for filling sports bottles in schools, gyms, leisure centres, and public areas. The bottle filling station is complete with a push button control, bottle filling spout, and 32mm flush grated waste fitting. The Recessed bottle filling station fits into the wall and is secured by concealed fixing brackets. Size Overall Size 890mm High 483mm Wide 305mm Front to back. Recess Size 813mm high 432mm Wide 305mm Front to back Phone:

12 Outdoor Bottle Filler Push button or sensor operation Product Code OBF The outdoor bottle filler is environmentally friendly and promotes the use of refillable water bottles whilst providing a fast, convenient way to obtain drinking water, and reduces the waste associated with disposable water bottles. Ideal for locations such as sports venues, parks, schools, and any public outdoor area. Construction The outdoor bottle filler is manufactured from heavy gauge Stainless steel, or heavy gauge steel with a powder coated finish in green, red or blue. The bottle filler pedestal has a fixing flange with pre-drilled holes for fixing bolts supplied by others. As an option a ground mounting plate can be supplied. The ground mounting plate requires installation into the floor. The bottle filler has a removable access panel with vandal resistant screws. Replaceable internal water filter. Operation Push button control as standard Push button control with additional sensor operation. Size Height: 1320mm Height to base of filler recess: 927mm Diameter: 305mm Stainless steel or powder coated steel finish Push Button or push button and sensor operation Ground mounting plate Ground level pet drinking fountain Freeze resistant valve on push button model only Phone:

13 Concrete Outdoor Drinking Fountain Product Code GUF99 Outdoor concrete pedestal drinking fountain. The vandal resistant design incorporates a round drinking fountain bowl manufactured from 18 gauge 304 stainless steel mounted into a reinforced brown concrete aggregate pedestal. The drinking fountain is activated by a front mounted self-closing button. The button requires less than 5 pounds of force and activates an internally mounted valve with an adjustable flow regulator. The bubbler is manufactured from polished chrome plated brass with a non-squirt feature and operates on a water pressure range of 1 to 7 bar. Resistant to sunlight, heat, moisture and wear 18 gauge, 304 stainless steel bowl Reinforced concrete with aggregate finish Polished chrome plated brass, anti-rotation nonsquirt bubbler 100 mesh inlet strainer Junior Height version 762mm high. Foot spray valves. Hose bib tap option. Web: