STRUCTURAL PRESSURE VESSELS' ACCESSORIES & SPARE PARTS WATER PURIFICATION TANKS & SYSTEMS

Size: px
Start display at page:

Download "STRUCTURAL PRESSURE VESSELS' ACCESSORIES & SPARE PARTS WATER PURIFICATION TANKS & SYSTEMS"

Transcription

1 STRUCTURAL PRESSURE VESSELS' ACCESSORIES & SPARE PARTS WATER PURIFICATION TANKS & SYSTEMS

2 TABLE OF CONTENT TABLE DES MATIÈRES MATERIALS...5 POLYMERS...5 RUBBERS/ELASTOMERS...6 METALS...6 USER GUIDE...7 WHAT IS WHAT...7 SYMBOLS & ICONS...8 INSTRUCTION...9 INSTALLATION INSTRUCTIONS...9 FLANGE ASSEMBLY...9 ASSEMBLY... 0 ACCESSORIES CLOSURE & ADAPTERS 2.5" THREAD 2.5" CLOSURE PVC... 4" THREAD DN " CLOSURE PVC " - 2.5" ADAPTER " THREAD 6" CLOSURE PVC " FLANGE 6" BLINDFLANGE " BLINDFLANGE ULTRA PURE " FLANGE -.5 BSP " FLANGE - 2.5" 8UN " FLANGE - 4" 8UN " FLANGE - DN " FLANGE - DN " FLANGE - DN WATER PURIFICATION TANKS & SYSTEMS 2

3 BLINDFLANGE DN50 FLANGE DN65 FLANGE DN80 FLANGE DN00 FLANGE DN25 FLANGE DN50 FLANGE DN200 FLANGE DN400 FLANGE... 3 DRAIN INSERTS 6" FLANGE " BSP OUTLET STANDARD "BSP OUTLET LOW FLOW "BSP OUTLET HIGH FLOW SIGHT GLASS SIGHTGLASS VALVES TOOLS AERATION VALVES.5" AERATION VALVE ADAPTER FOR AERATION VALVE.5" " VALVE 2.5" VALVE MANUAL VALVE - 3/4" INLET/OUTLET WRENCHES NOTCHED WRENCH FOR ADATORS OCTOGON 2.5" OCTOGON 4"... 4 WRENCH FOR MANUAL VALVE EXTENSIONS EXTENSION 3/4 BSP EXTENSION 2" BSP EXTENSION HOLDER 6-FOLD HUB WATER PURIFICATION TANKS & SYSTEMS 3

4 SPARE PARTS HUBS & HUB CONNECTORS HUB HUBCAP HUB ADAPTORS LATERAL DIFFUSOR UNION... 5 ELBOW SEALS O'RING FLAT SEAL WATER PURIFICATION TANKS & SYSTEMS 4

5 MATERIALS POLYMERS POLYETHYLENE (PE) PE is the material used for the inner lining of standard Structural vessels and some closures and adaptors found in this catalogue. Typical proprerties: Lightweight High toughness and elongation before break Very low water absorption & permeability High resistance to attack by chemicals Resistance to environmental stress cracking POLYVINYLIDENEFLUORIDE (PVDF) Linings and components for ultra pure applications. PVDF is a high-grade technical polymer with excellent (chemical) properties. Typical proprerties: High Toughness and elongation before break at high and low temperatures. Very high resistance to attack by most chemicals Suitable for ultra pure applications High mechanical strength. POLYPROPYLENE (PP) Injection molded material for standard laterals, hubs and hub adaptors Typical proprerties: Similar properties as PE Higher temperature resistance then PE PP is Brittle when cold (below 0 C) (take car during cold assembly). GLASSFIBER REINFORCED POLYPROPYLENE (PP-GF) Injection molded material for high temperature laterals, hub adaptors. PP-GF has much higher stiffness then normal PP. POLYPHENYLENEOXIDE (PPO) Injection molded material for typical flanges and flanged closures. PPO is used as a 30% glass-filled product. Typical proprerties: High dimensional stability High temperature resistance (up to 99 C) Good resistance to hydrolysis Self extinguishing, non-dripping Low water absorption POLYVINYLCHLORIDE (PVC) Widely used polymer for water transportation systems, but also other applications. PVC is one of the world most used platics. Structural uses PVC in some mechined and injection molded parts of the distribution systems. Typical proprerties: High mechanical strengh, rigidity and hardness Low cold impact strength High chemical resistance Self extinguishing after removing ignition source GLASSFIBER REINFORCED EPOXY (EP-GF) Thermosetting material with a very high strength. Up to 60% glass-filled this plastic approaches the strength of aluminium, but has an even greater strength to weight ratio. It is not intended to come in contact with the contents of the vessel and is used as a reinforcing element only. Typical proprerties: Very high strength & durability Structure elements only WATER PURIFICATION TANKS & SYSTEMS 5

6 RUBBERS/ELASTOMERS ACRYLONITRILE BUTADIENE (NBR) General purpose rubber compound ETHYLENE-PROPYLENE-DIENE TERPOLYMER (EPDM) Rubber compound with a better chemical and thermal resistance than standard NBR grade. TETRAFLUORETHYLENE/ HEXAFLUORPROPYLENE (FEP) Very high performance O-ring material. FEP seals are in fact made of a FPM inner core providing the necessary flexibility, enveloped by a seamless Teflon (PFA) cover. Used where chemical, toxological and thermal properties are of the utmost importance. FLUOR-CARBON ELASTOMER (FPM) Special grade (Viton ) for specific applications. Suitable for most Ultra Pure or highly corrosive applications. METALS STAINLESS STEEL (SS) All bolts are made of A2 ( ) grade stainless steel, all nuts, washers, spring washers etc. are grade A4 ( ). ALUMINIUM (AL) Lightweight and corrosion resistant metal for construction of the flanges that are built in STRUCTURAL pressure vessels For specific chemical resistance of one or more materials and agents, please contact our sales department. We will be happy to give advise. Please specify the chemical exactly, along with its concentration & temperature. WATER PURIFICATION TANKS & SYSTEMS 6

7 USER GUIDE WHAT IS WHAT 2 4" - 6" - 8" 6" FLANGE DN Item Description Dimensions Quantity Matière N d'article Adaptor 6 - DN65 PP A C A C 2 Diffusor mm PP A A Diameter of vessel 8 System connection 2 Vessel connection 9 Type of lateral connection 3 Exploded View 0 Lateral slot size 4 Dimensions Spare parts list 5 Pressure drop curve 2 Minimum order quantity 6 Operating temperature 3 Codes 7 Type of installation A-2727-F6 A-2527-F6 3 WATER PURIFICATION TANKS & SYSTEMS 7

8 SYMBOLS & ICONS Bajonet system System or component suitable from C up to 50 C Threated system System or component suitable from C up to 65 C Slotsize of 0.2 mm System or component suitable from C up to 99 C Slotsize of 0.3 mm Outward system connection Slotsize of 0.5 mm Adaptor function from... to... Slotsize of 2 mm Glue connection System or component for flanged vessels Spare parts System or component for threaded vessels System or component suitable for ultra Threaded or flanged closures Maximum torque specification Threaded or flanged adapters Minimum order quantity Drain inserts System for installation in top of threaded Tools and assembly aids System for installation in bottom of threaded vessel System for installation in top of flanged vessel System for installation in topthreaded vessel System for installation in bottom of flanged vessel System for installation in topflanged vessel with sideholewith sidehole System for installation in topflanged vessel WATER PURIFICATION TANKS & SYSTEMS 8

9 INSTRUCTION INSTALLATION INSTRUCTIONS Please check parts on transport damage prior to assembly and installations. Protect the components from freezing 0 C (32 F). Pre-heating of the parts in warm water is recommended for assemblies below 0 C (50 F). Maximum torque to 5 Nm (3,69 ft.-lbs). FLANGE ASSEMBLY WATER PURIFICATION TANKS & SYSTEMS 9

10 ASSEMBLY Step : Unassembled parts with extension I-WR03-LA. Step 2: Parts shown in Step are assembled (outside of tank) and inserted in tank using extension I-WR03-LA. Step 3: Put assembly inside the tank to mount laterals. Step 4: Screw all laterals in hub while still holding extension. Step 5: Screw flange adaptor on assembly. Be sure O-ring is attached and sealed properly to adaptor. Step 6: Use backing flange to connect distribution system to 6 flange. Now remove extension. WATER PURIFICATION TANKS & SYSTEMS 0

11 CLOSURES & ADAPTER 2.5" THREAD 2.5"-8NPSM Item Description Dimensions Quantity Material Part number Closure 2.5" -8NPSM PVC A O-ring x 3.53 mm NBR A A-275-C WATER PURIFICATION TANKS & SYSTEMS

12 CLOSURES & ADAPTER DN 400 DN400 DN50 DN400 - DN50 Item Description Dimensions Quantity Material Part number Flange Adapter DN50-63 mm PVC A Flange DN50 PP-GF X-V-IPN 3 Pipe mm PVC A-PVC Table Duct 63 mm PVC A C 5 Flange DN400 LLDPE/GR-EP A-MACH-DN400 6 Bolt M24 x 30 6 SS A-M Washer M24 32 SS A-M24-RON 8 Spring Washer M24 6 SS A-M24-VRO 9 Nut M24 6 SS A-M24-A4 0 Flat Seal DN400 NBR A-DN40-0D A C WATER PURIFICATION TANKS & SYSTEMS 2

13 CLOSURES & ADAPTER 4" THREAD 4" - 8 UN Item Description Dimensions Quantity Material Part number Closure 4"-8UN PVC A O-ring 98 x 4 mm NBR A A-2752-C WATER PURIFICATION TANKS & SYSTEMS 3

14 CLOSURES & ADAPTER 4" THREAD 4"-8UN 2 /2"-8NPSM 4" - 8 UN Item Description Dimensions Quantity Material Part number Closure 4"-8UN PVC A O-ring 98 x 4 mm NBR A A C WATER PURIFICATION TANKS & SYSTEMS 4

15 CLOSURES & ADAPTER 6" THREAD 6" - 8 UN Item Description Dimensions Quantity Material Part number Closure 6"-8UN C-PVC A F 2 O-ring 55 x 5 mm NBR A-2694-BF A FC WATER PURIFICATION TANKS & SYSTEMS 5

16 CLOSURES & ADAPTER 6" FLANGE 6" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Closure 6" PPO A Backing Flange 6" PPO A Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 6 Washer M8 24 SS A-M8-RON A-300-0C WATER PURIFICATION TANKS & SYSTEMS 6

17 CLOSURES & ADAPTER 6" FLANGE HDPE PVDF Item Description Dimensions Quantity Material Part number Closure 6" A-300-0AL A-300-0AL 2 O-ring x 6.99 mm FPM A-2694-V8F A-2694-V8F 3 Bolt M8 x 75 2 SS A A Washer M8 24 SS A-M8-RON A-M8-RON 5 Nut M8 2 SS A-M8-A4 A-M8-A4 A-300-ALC A-300-ALC WATER PURIFICATION TANKS & SYSTEMS 7

18 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE.5" BSP.5" BSP 6" -.5" BSP Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" -.5"BSP PPO A Backing Flange 6" PPO A Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 6 Washer M8 24 SS A-M8-RON A C WATER PURIFICATION TANKS & SYSTEMS 8

19 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE 2.5"-8 NPSM 2.5" 8 NPSM 6" - 2.5" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" - 2.5" PPO A Backing Flange 6" PPO A Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 6 Washer M8 24 SS A-M8-RON A C WATER PURIFICATION TANKS & SYSTEMS 9

20 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE 4" - 8 UN 4" - 8 UN 6" - 4" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" - 4" PPO A Backing Flange 6" PPO A Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 6 Washer M8 24 SS A-M8-RON A C WATER PURIFICATION TANKS & SYSTEMS 20

21 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE 2.5" - 8 UN DN 65 6" - DN65-2.5" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" - DN65 PPO A Washer M6 4 SS A-M6-RON 4 Spring Washer M6 4 SS A-M6-VRO 5 Nut M6 4 SS A-M6-A4 6 Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 8 Washer M8 24 SS A-M8-RON 9 Backing Flange 6" PPO A A C WATER PURIFICATION TANKS & SYSTEMS 2

22 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE 4" - 8 UN DN 80 6" - DN80-4" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" - DN80 PPO A Washer M6 8 SS A-M6-RON 4 Spring Washer M6 8 SS A-M6-VRO 5 Nut M6 8 SS A-M6-A4 6 Bolt M8 x 75 2 SS A-M Nut M8 2 SS A-M8-A4 8 Washer M8 24 SS A-M8-RON 9 Backing Flange 6" PPO A A C WATER PURIFICATION TANKS & SYSTEMS 22

23 CLOSURES & ADAPTER 6" FLANGE 6" FLANGE 4" - 8 UN DN 00 6"-DN00-4" Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Adapter 6" - DN00 PPO A Washer M6 8 SS A-M6-RON 4 Spring Washer M6 8 SS A-M6-VRO 5 Nut M6 8 SS A-M6-A4 6 Nut M8 2 SS A-M8-A4 7 Washer M8 24 SS A-M8-RON 8 Bolt M8 2 SS A-M8-075 A C WATER PURIFICATION TANKS & SYSTEMS 23

24 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A6-DN20-PPGF 6 Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 24

25 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 25

26 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 26

27 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 27

28 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 28

29 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF AG-DN-50B AG-DN-80B AG-DN-0B AG-DN-20PPGF 6 Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 29

30 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF/PVC AG-DN-50B AG-DN-80B AG-DN-0B A Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 30

31 CLOSURES & ADAPTER BLINDFLANGE Item Description Material DN50 DN80 DN00 DN200 Nut SS A-M6-A4 A-M6-A4 A-M6-A4 A-M20-A4 2 Spring Washer SS A-M6-VRO A-M6-VRO A-M6-VRO A-M20-VRO 3 Bolt SS A-M6-90 A-M6-90 A-M6-90 A-M Washer SS A-M6-RON A-M6-RON A-M6-RON A-M20-RON 5 Blind Flange PP-GF AG-DN-50B AG-DN-80B AG-DN-0B AG-DN-20PPGF 6 Seal NBR A A A A-DN20-0D AG-DN-50L AG-DN-80L AG-DN-0L A C WATER PURIFICATION TANKS & SYSTEMS 3

32 DRAIN INTRODUCTION INSERTS 6" FLANGE DRAIN " BSP " BSP Item Description Dimensions Quantity Material Part number O-ring x 6.99 mm NBR A F 2 Drain insert 6"-"BSP PPO A Nut M8 2 SS A-M8-A4 4 Washer M8 24 SS A-M8-RON 5 Bolt M8 x 20 2 SS A-M8-20 A-DRAIN-BSP WATER PURIFICATION TANKS & SYSTEMS 32

33 DRAIN INTRODUCTION INSERTS 6" FLANGE DRAIN " BSP "BSP 2.5" Item Description Dimensions Quantity Material Part number Prolongation mm PPO A C 2 O-ring x 6.99 mm NBR A F 3 Drain insert 6"-"BSP PPO A Nut M8 2 SS A-M8-A4 5 Washer M8 24 SS A-M8-RON 6 Bolt M8 x 20 2 SS A-M8-20 A-DRAIN-LF WATER PURIFICATION TANKS & SYSTEMS 33

34 DRAIN INTRODUCTION INSERTS 6" FLANGE DRAIN " BSP "BSP 4" Item Description Dimensions Quantity Material Part number Prolongation 4 50mm PPO A C 2 O-ring x 6.99 mm NBR A F 3 Drain insert 6"-"BSP PPO A Nut M8 2 SS A-M8-A4 5 Washer M8 24 SS A-M8-RON 6 Bolt M8 x 20 2 SS A-M8-20 A-DRAIN-HF WATER PURIFICATION TANKS & SYSTEMS 34

35 SIGHT INTRODUCTION GLASS SIGHTGLASS DN80 DN00 Item Description Quantity Material Part number Nut 8 SS A-M6-A4 A-M6-A4 2 Spring Water 8 SS A-M6-VRO A-M6-VRO 3 Bolt 8 SS A-M6-0 A-M6-0 4 Washer 6 SS A-M6-RON A-M6-RON 5 Backing Flange PP-GF X-V-IP80 X-0D-N0 6 Seal NBR A A Sightglass GLASS A-KIJK-80 A-KIJK A-SGHT-DN80 A-SGHT-DN00 WATER PURIFICATION TANKS & SYSTEMS 35

36 VALVES INTRODUCTION AERATION VALVE AERATION VALVE Item Thread A Thread B Material /2" BSP /2" BSP PP-GF/EPDM A-AV-50PP /2" NPT /2" NPT PP-GF/EPDM /2" BSP /2" BSP PVDF/FPM A-AV-50PVDF /2" NPT /2" NPT PVDF/FPM WATER PURIFICATION TANKS & SYSTEMS 36

37 VALVES INTRODUCTION AERATION VALVE ADAPTER FOR AERATION VALVE D Description Material 48mm /2" BSP - 48 mm PVC A-AV-AD48 50mm /2" BSP - 50 mm PVC A-AV-AD50 WATER PURIFICATION TANKS & SYSTEMS 37

38 VALVES INTRODUCTION 2.5" VALVE MANUAL VALVE Type Thread A Thread B Material 2.5" - 8 NPSM 3/4" BSP PP A-ANA-25-G3/4 WATER PURIFICATION TANKS & SYSTEMS 38

39 TOOLS INTRODUCTION WRENCHES NOTCHED WRENCH FOR ADAPTERS Item Description Dimensions Quantity Material Part number Notched wrench for adapters Ø7 x 97 Ø.5 x 26.5 STEEL I-WR0-AD I-WR0-AD WATER PURIFICATION TANKS & SYSTEMS 39

40 TOOLS INTRODUCTION WRENCHES OCTOGONAL WRENCH FOR ADAPTERS 2.5" - 84 MM Item Description Dimensions Quantity Material Part number Octagonal wrench for adapters 2.5" - 84 mm PVC I-WR05-AD I-WR05-AD WATER PURIFICATION TANKS & SYSTEMS 40

41 TOOLS INTRODUCTION WRENCHES OCTOGONAL WRENCH FOR ADAPTERS 4" - 6 MM Item Description Dimensions Quantity Material Part number Octagonal wrench for adapters 4" - 6 mm PVC I-WR06-AD I-WR06-AD WATER PURIFICATION TANKS & SYSTEMS 4

42 TOOLS INTRODUCTION WRENCHES WRENCH FOR MANUAL VALVE Item Description Dimensions Quantity Material Part number Wrench for manual valve 0.5 PP A-ANA-S A-ANA-S WATER PURIFICATION TANKS & SYSTEMS 42

43 TOOLS INTRODUCTION EXTENSION EXTENSION 3/4" BSP Item Description Dimensions Quantity Material Part number Extension 3/4" BSP STEEL I-WR03-LA I-WR03-LA WATER PURIFICATION TANKS & SYSTEMS 43

44 TOOLS INTRODUCTION EXTENSION EXTENSION 2" BSP Item Description Dimensions Quantity Material Part number Extension 2" BSP STEEL I-WR02-LA I-WR02-LA WATER PURIFICATION TANKS & SYSTEMS 44

45 TOOLS INTRODUCTION EXTENSION EXTENSION 6-8 HUBS Item Description Dimensions Quantity Material Part number Extension 6-8-HUBS STEEL I-WR04-LA I-WR04-LA WATER PURIFICATION TANKS & SYSTEMS 45

46 SPARE INTRODUCTION PARTS HUB Item Description Dimensions Material Part number Hub (6) PP AB-H60-00 Hub (6) PP ATD-H60-00 Hub (8) PP ATD-H80-00 Hub (6) PP-GF ATD3-H60-00 Hub (8) PP-GF ATD3-H80-00 Hub (6) PVDF ATD-H60-00 Hub (8) PVDF ATD-H80-00 WATER PURIFICATION TANKS & SYSTEMS 46

47 SPARE INTRODUCTION PARTS HUBCAP PP PP-GF PVDF Item Description Part number 2.5" - 8 NPSM AC-H60-00 AC3-H60-00 AC-H " BSP AD-H60-00 AD3-H60-00 AD-H BSP - 3/4" BSP A-BTC8-30 A3-BTC8-30 A-BTC " - 8 UN AD-H80-00 AD3-H80-00 AD-H80-00 WATER PURIFICATION TANKS & SYSTEMS 47

48 SPARE INTRODUCTION PARTS HUBADAPTER PVC PP (*) PP-GF Item Description Part number PVDF 2.5" - 8 NPSM / 3" BSP AB-C08-30* AB3-C08-30 AB-C " BSP / 4" -8 UN AB-C08-40* AB3-C08-40 AB-C " BSP / D = 50mm A " BSP / D = 60mm A " BSP / D = 63mm A " BSP / 90mm AB-GC WATER PURIFICATION TANKS & SYSTEMS 48

49 SPARE INTRODUCTION PARTS LATERAL PVDF PP-GF PPO PP White Black Gray PP Yellow L (mm) Length 3 A-BT02-3 A-BT05-3 A-TH02-3 A-TH05-3 A3-TH02-3 A-TH A-BT02-75 A-BT05-75 A-TH02-75 A-TH05-75 A3-TH02-75 A-TH A-BT A-BT A-TH A-TH A3-TH A-TH A-BT A-BT A-TH A-TH A3-TH A-TH A-TH02-36 A-TH05-36 A3-TH02-36 A-TH A-TH A-TH A3-TH A-TH A-TH A-TH A3-TH A-TH A-TH02-55 A-TH05-55 A3-TH02-55 A-TH A-TH A-TH A3-TH A-TH WATER PURIFICATION TANKS & SYSTEMS 49

50 SPARE INTRODUCTION PARTS DIFFUSOR PVDF White PP Gray PP Yellow T2 (mm) Thread T(mm) Thread h (mm) Height L (mm) Lenght 2" BSP ø A " BSP ø A A A-2742-BSP 2.5" - 8 NPSM 2"BSP A A A " - 8 NPSM 2"BSP A WATER PURIFICATION TANKS & SYSTEMS 50

51 SPARE INTRODUCTION PARTS UNION Item Description Material Part number Collat PVC A Union nut PVC A A C 5 WATER PURIFICATION TANKS & SYSTEMS 5

52 SPARE INTRODUCTION PARTS ELBOW D= 60 mm D= 63 mm Item Description Material Part number O-ring NBR A A Elbow PVC A A A-2700-C A-2693-C 5 WATER PURIFICATION TANKS & SYSTEMS 52

53 SPARE INTRODUCTION PARTS O'RING Di d AS-N NBR EPDM FPM FEP AS33 A AS334 A A A A F A-2694-BF AS256 A AS442 A F - A-2694-V8F A-2694-F8F 20 WATER PURIFICATION TANKS & SYSTEMS 53

54 SPARE INTRODUCTION PARTS FLAT SEAL DN DIN2690 D d b Part Number DN A DN DN A DN A DN DN A-DN5-0D 5 DN A-DN20-0D 5 DN A-DN30-0D 5 DN A-DN40-0D 5 WATER PURIFICATION TANKS & SYSTEMS 54

55 Marketing support Contact us: By mail Commercial support By phone Tel Technical support techsupport.water@pentair.com Marketing support marketing.prfemea@pentair.com MKT-BRO-035-EN-A

Introduction TEFLON PFA Filtration

Introduction TEFLON PFA Filtration Introduction TEFLON PFA Filtration The following pages are devoted to in-line filtration devices. Designs follow the popular 47 and 50 holders manufactured the past 23 years by Savillex Corp. Typical applications

More information

Components. Ralphs-Pugh Roller Component Parts. Bushings. Endplugs. Plastic Tubing. Hardware

Components. Ralphs-Pugh Roller Component Parts. Bushings. Endplugs. Plastic Tubing. Hardware Ralphs-Pugh Roller Component Parts Ralphs-Pugh roller components are custom molded or fabricated at our facility insuring the highest quality possible. With complete control of design and a long-term commitment

More information

FBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information

FBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated

More information

BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER

BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER BROEN UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle

More information

SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi

SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi 2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless

More information

DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076

DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076 Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400

More information

Single, oversized roller compresses a low friction hose through a full 360-degree rotation

Single, oversized roller compresses a low friction hose through a full 360-degree rotation Graco EP Series Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degree rotation More flow per revolution than conventional designs One hose compression per

More information

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026 Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless

More information

Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001

Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001 QUALITY MANAGEMENT SYSTEM CERTIFIED HEALTH & SAFETY MANAGEMENT SYSTEM Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING ISO 9001:2008 REGISTERED COMPANY EN ISO 10380 PRODUCED AND TESTED OHSAS 18001

More information

FOAM PROPORTIONING EQUIPMENT

FOAM PROPORTIONING EQUIPMENT 10 VERTICAL & HORIZONTAL BLADDER TANKS DESCRIPTION All valves are labeled showing normal working position. Buckeye Bladder Tanks store foam concentrate and are one component of a Balanced Pressure Foam

More information

4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123

More information

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE: BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential

More information

MR98 Series Backpressure Regulators, Relief and Differential Relief valves

MR98 Series Backpressure Regulators, Relief and Differential Relief valves MR98 Series Instruction Manual January 2015 MR98 Series Backpressure Regulators, Relief and Differential Relief valves P1757 TyPe MR98L P1753 TyPe MR98H D103588X012 Figure 1. Typical MR98 Series Backpressure

More information

Tools. For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools:

Tools. For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools: BW-0BH INSTALLATION INSTRUCTIONS SINGLE HANDLE Kitchen Faucet Tools For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools: SAFETY GLASSES PIPE WRENCH PLIERS CHANNEL

More information

LOOK. CP Test Stations! Your Key to Corrosion Monitoring & Utility Locating. P.O. Box 311 Kearny, N.J

LOOK. CP Test Stations! Your Key to Corrosion Monitoring & Utility Locating.   P.O. Box 311 Kearny, N.J CP_Monitoring_0912AB_Layout 1 9/10/12 5:50 PM Page 1 P.O. Box 311 Kearny, N.J. 07032 201.998.1500 www.cptestproducts.com Your Key to Corrosion Monitoring & Utility Locating LOOK CP Test Stations! CP_Monitoring_0912AB_Layout

More information

Capacity kw. Thermal turndown from specified maximum capacity 8:1 8:1

Capacity kw. Thermal turndown from specified maximum capacity 8:1 8:1 3-18.3-5 Specifications of OXY-THERM TITAN burners Typical burner data Fuel: natural gas at 15 C with 10.9 kwh/nm 3 HHV - sg = 0.6 Oxygen: 90-100% purity Stated pressures are indicative. Actual pressures

More information

PARTS CATALOGUE 05/05/2011. (issue 6) DEALER

PARTS CATALOGUE 05/05/2011. (issue 6) DEALER PARTS CATALOGUE 05/05/20 (issue 6) DEALER ULTRAMAGIC,S.A. Aerodrom Igualada-Odena 08700 IGUALADA (SPAIN) tel: +34 93 8042202 fax: +34 93 8035604 e-mail : admin@ultramagic.com All prices are ex works in

More information

Urea/Adblue Hose Reel

Urea/Adblue Hose Reel www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose

More information

PRODUCT TRAINING MANUAL

PRODUCT TRAINING MANUAL PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6

More information

ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE

ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE All-plastic, medium mechanical strength, food grade conduit.. NMFG is a conduit specially made for the food industry. The smooth jacket of FDA approved compound

More information

ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189

ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 HYDROSCAND ACCESSORIES PRODUCT GROUP 500, 505, 507 OCH 510 This product group includes products that complement Hydroscand s range of hoses and fluid connectors,

More information

tttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of

More information

Smallest Connector with Removable Contacts

Smallest Connector with Removable Contacts 1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative

More information

Available materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas).

Available materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas). Manual hose reel type STKi2 The manual hose reel type STKi2 with closed hub is suitable for all industrial and vehicle applications. While extending the drum hub and the cross braces the length of the

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 0 Travelers Rest, SC 60 B-07-PA Travelers Rest, SC: 00-476-403 Simi Valley, CA: 00-43-050 Fax: 64-34-35 www.tsbrass.com This Space for Architect/Engineer Approval Job Name Date

More information

HANDWHEELS.

HANDWHEELS. HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...

More information

TROLLEY-MOUNTED HOSE REELS

TROLLEY-MOUNTED HOSE REELS TROLLEY-MOUNTED HOSE REELS N 222-AC Work safely, move with ease ADVANCED FLUID MANAGEMENT SOLUTIONS HELP THE NATURE Packaging contains, depending on the articles, one or more of the following materials;

More information

Hammer, Discus, Shot Put, Javelin

Hammer, Discus, Shot Put, Javelin Hammer, Discus, Shot Put, Javelin Competition Aluminium Discus And Hammer Cage 7/10 M Order No. 30290 Order No. 30290 D (Double Net) Order No. 30290 DS (Dismantle to fit a 20 container) Competition aluminium

More information

The Shand & Jurs Model Pressure Relief Vent

The Shand & Jurs Model Pressure Relief Vent PRODUCT DATA SHEET Designed for high efficiency & economy Provides maximum flow capacity Reduces maintenance and replacement costs Suitable for corrosive and toxic applications Standard flange base for

More information

AQUAVALVE THROUGH BULKHEAD

AQUAVALVE THROUGH BULKHEAD AQUAVALVE THROUGH BULKHEAD The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is designed and made in New Zealand, for demanding marine sanitation applications. The

More information

Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series

Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.

More information

Hoses for foodstuff and drink processing. Food quality hoses

Hoses for foodstuff and drink processing. Food quality hoses Hoses for foodstuff and drink processing for various food and beverage industrial processes Oy s food quality hoses are produced on clean anodized aluminium mandrels by experienced professionals. This

More information

Fugitive Emission Test Report

Fugitive Emission Test Report Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition

More information

SECTION I-1. Type: 1812-AC. Fuel: Air-Gas.

SECTION I-1. Type: 1812-AC. Fuel: Air-Gas. RADIANT LINE BURNER. SECTION I-1. Type: 1812-AC. Manufactured from a heat resisting cast alloy with a ceramic front face, this radiant burner type is ideally suited for use in Infrared Heating production

More information

Reverse Osmosis system 50 GPD Instruction manual EN

Reverse Osmosis system 50 GPD Instruction manual EN Reverse Osmosis system 50 GPD Instruction manual EN Contents 1. Unpacking 2. Scope of supply 3. Insertion of the membranes 4. Connecting the lines 5. Installation 6. First commissioning 7. Consumables

More information

ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS

ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS SAFETY SPRAY SHIELDS FOR FLANGES CLOTH Our plastic cloth safety shields

More information

SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP

SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops

More information

EXPANDING 07BARRIERS

EXPANDING 07BARRIERS SECTION EXPANDING 07BARRIERS Note: BPG600RW shown with optional locking castors. When it comes to quality, range and flexibility of design, our Port-a-guard systems leads the industry in expanding barriers.

More information

FILTER CARTRIDGE HOUSINGS

FILTER CARTRIDGE HOUSINGS B-1 Explore the World of Hydro Systems International HYDRO SYSTEMS FILTER CARTRIDGE HOUSINGS Economical filter cartridge housings can be used in a broad range of residential, commercial, and industrial

More information

FluoroLine Plus Dual Containment Tubing

FluoroLine Plus Dual Containment Tubing ADVANCED MATERIALS HANDLING FluoroLine Plus Dual Containment Tubing Enabling uninterrupted process s and increased chemical resistance at lower cost per installed foot of tubing Clean, Continuous Lengths

More information

ENGINE DRIVEN PUMPS PRODUCTS

ENGINE DRIVEN PUMPS PRODUCTS ENGINE DRIVEN PUMPS PRODUCTS Red Lion Pumps With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs. What

More information

POP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018

POP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018 POP-UP OPTION USER HARDWARE MANUAL 0019850_REV_B 8/29/2018 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.edgetech.com ii The information, figures, and

More information

TruDesign Aquavalve (Y Valve)

TruDesign Aquavalve (Y Valve) TruDesign Aquavalve (Y Valve) Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert

More information

DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE

DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE MityLite sets the market standard for durability with our lightweight ABS Folding Tables. Proprietary construction ensures edge and corner strength while the table

More information

GoBidet Bidet Attachment

GoBidet Bidet Attachment GoBidet Bidet Attachment 151 Ruths Place #5 Sequim, WA 98382 Tel 1-800-681-0753 Fax +1 360-681-4029 www.go-bidet.com MODEL #2003C In this box: 1 User Manual 1 GoBidet Unit w/ mounting bracket, nut, rubber

More information

PN 3000 Series Fail Closed Pneumatic Actuators

PN 3000 Series Fail Closed Pneumatic Actuators PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.

More information

Data Sheet for Precision Potentiometer

Data Sheet for Precision Potentiometer The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19

More information

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Available materials: Steel, powder coated, RAL7032, RAL3000 (Application

More information

Inch Solvent Cement Sockets

Inch Solvent Cement Sockets abs Durapipe VKD Double Union Ball Valve Description: In-line double union ball valve Seats: PTFE End Connections: Solvent Sockets, Option: Electric or Pneumatic Actuation 3 /8 HO DKA 101 58.00 1 /2 HO

More information

INSTALLATION INSTRUCTIONS TOWNSEND

INSTALLATION INSTRUCTIONS TOWNSEND INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please

More information

BROEN-LAB UNIFLEX FITTINGS FOR WATER BROEN-LAB UNIFLEX TM FITTINGS FOR WATER

BROEN-LAB UNIFLEX FITTINGS FOR WATER BROEN-LAB UNIFLEX TM FITTINGS FOR WATER BROEN-LAB UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN-LAB UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single

More information

Foam Systems Engineering Design Manual

Foam Systems Engineering Design Manual Foam Systems Engineering Design Manual CONTENTS Foam Systems Engineering Design Manual Haardous Chemical & Product Data 1 Foam Concentrate Induction Systems 2 Protection of Fuel Storage Tanks 3 Foam Base

More information

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades

More information

2-3-5 Valve Manifolds

2-3-5 Valve Manifolds 2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision

More information

Integrated Process Solutions

Integrated Process Solutions Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family

More information

SPECIFICATIONS. For 1 8 OD Tubing FERRULES FOR 1 8 OD TUBING. One piece PTFE ferrule with SS casing1. One piece PTFE ferrule with SS casing2 008FT32

SPECIFICATIONS. For 1 8 OD Tubing FERRULES FOR 1 8 OD TUBING. One piece PTFE ferrule with SS casing1. One piece PTFE ferrule with SS casing2 008FT32 4 OMNI-LOK FITTING SYSTEMS OMNI-LOK TYPE P For 1 16, 1 8 or 3 16 OD semi-rigid tubing and ¼ -28 UNF, M6 or 5 16-24 UNF threaded flat-bottom ports Pressure rated up to 1000psi (69 bar) when hand-tight High

More information

Emergency Stop Devices

Emergency Stop Devices New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com

More information

Installation Instructions for. Thrifty King CT Series Fountains

Installation Instructions for. Thrifty King CT Series Fountains Installation Instructions for Thrifty King CT Series Fountains Congratulations, you have just purchased the finest watering fountain on the market. This unit is built to give you excellent service when

More information

300 Model 870 Four Wheel Hose Cart Owner s Manual

300 Model 870 Four Wheel Hose Cart Owner s Manual 300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST

More information

Metal & Teflon Lined Hose

Metal & Teflon Lined Hose May 2001 Metal & Teflon Lined Hose Components & Controls, Inc. 493 Washington Avenue Carlstadt, NJ 07072 201-438-9190 212-564-5541 Fax: 201-438-3356 www.componentsandcontrols.com Components & Controls,

More information

D. S. HULL COMPANY, INC

D. S. HULL COMPANY, INC Perko Flush Ring Pull Chrome plated zinc. Order No Mfg No O.D. List 340427 1232DP1CHR 1-5/8 $15.78 340434 1232DP2CHR 2 $18.38 Perko Flush Lifting Handle Chrome plated brass. Screw size: #8. Note: 776DP2

More information

General Laborator. Beakers, Low Form. Beakers, Low Form. Beaker Cups, Disposable Consumables General Plasticware

General Laborator. Beakers, Low Form. Beakers, Low Form. Beaker Cups, Disposable Consumables General Plasticware Beakers, Low Form PP, highly transparent Ideal for general laboratory use. With spout and exceptionally easy-to-read blue graduations. Good chemical resistance Resistant to heat up to 121 C (for 20 minutes),

More information

IB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility

IB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility IB 15/120 The Ice Blaster IB 15/120 is one of the most powerful dry ice blasting machines on the market. It impresses with its robustness, highly reliable technology and the best results in dry ice cleaning.

More information

Installation Instructions for. Thrifty King CT Series Fountains

Installation Instructions for. Thrifty King CT Series Fountains Installation Instructions for Thrifty King CT Series Fountains Congratulations, you have just purchased the finest watering fountain on the market. This unit is built to give you excellent service when

More information

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended

More information

Tuf-Lite II Fans 7000 Series Hub

Tuf-Lite II Fans 7000 Series Hub Tuf-Lite II Fans Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 & 3 Diameter Hudson Tuf-Lite II (white, prev. blue***) fan blades are made from fiberglass

More information

Upchurch LOW PRESSURE FITTINGS AND CONNECTORS

Upchurch LOW PRESSURE FITTINGS AND CONNECTORS AND CONNECTORS Flangeless Fittings Upchurch Flangeless Fittings Upchurch Scientific Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:

More information

Old-Style Aging Cell 316 Stainless Steel mL Capacity. Part No Instruction Manual. Updated 8/21/2014 Ver. 1.7

Old-Style Aging Cell 316 Stainless Steel mL Capacity. Part No Instruction Manual. Updated 8/21/2014 Ver. 1.7 Old-Style Aging Cell 316 Stainless Steel - 500-mL Capacity Part No. 175-70 Instruction Manual Updated 8/21/2014 Ver. 1.7 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:

More information

Harrington Inc West 21st Street, Erie, PA USA phone fax pg 1

Harrington Inc West 21st Street, Erie, PA USA phone fax pg 1 Harrington Inc. 2630 West 21st Street, Erie, PA USA 16506-2908 phone 800.553.0078 fax 814.838.7339 pg 1 Safety First in LDH Systems We cannot state too emphatically the need to follow certain guidelines

More information

AISI 316L PERFORMANCE RANGE INSTALLATION AND USE

AISI 316L PERFORMANCE RANGE INSTALLATION AND USE CP-ST Stainless steel centrifugal pumps CP-ST4 Pump body: stainless steel AISI 304 Impeller: stainless steel AISI 304 Shaft: stainless steel AISI 431 CP-ST6 Pump body: stainless steel AISI 316L Impeller:

More information

Content. Type SIL100 Ultra-pure silicone hose 4. Type SIL200 Fabric-reinforced silicone hose 6. Type SIL300 Wire-reinforced silicone hose 8

Content. Type SIL100 Ultra-pure silicone hose 4. Type SIL200 Fabric-reinforced silicone hose 6. Type SIL300 Wire-reinforced silicone hose 8 Silicone hoses Introduction The Markert Group specialises in the development and manufacture of customised industrial hose assemblies for demanding applications. Based on our employees' many years of extensive

More information

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight

More information

Value-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves. Installation, Maintenance and Operating Instructions

Value-Line 1, 2 & 3 (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves. Installation, Maintenance and Operating Instructions Value-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves Installation, Maintenance and Operating Instructions IMO-R24 5/2013 2 IMO-R24 Table of Contents 1 GENERAL....................................

More information

Pilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)

Pilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less) (general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT

More information

300 ft. 5/8 Hose wagon

300 ft. 5/8 Hose wagon 300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).

More information

XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL

XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL TEF 9964 XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL IMPORTANT Read this instruction carefully before installing the product 996A106032 TUM 1024 REV. E 06.02.14 Tranberg AS P.O. Box 8033 N-4068 Stavanger

More information

FIBER OPTIC CLOSURES

FIBER OPTIC CLOSURES FIBER OPTIC CLOSURES In-line type and dome type - series CLS-I, CLS- IF2X, CLS-D, CLS-DF2X144 and CLS-DF2X240 PACIFIC INTERCONNECTIONS - connecting the world with fiber optics IN-LINE TYPE FIBER OPTIC

More information

IB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display

IB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display IB 7/40 Classic Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device. 1 Automatic

More information

Spare parts list ( ) Spare parts list BR 40/10 C

Spare parts list ( ) Spare parts list BR 40/10 C Spare parts list (59708360) Spare parts list BR 40/10 C 2011-05-09 www.kaercher.com EN Spare parts list BR 40/10 C (59708360)... 6 10 Retaining bracket and switch (02010300)... 7 11 Retaining bracket

More information

CBO-750 ASSEMBLY INSTRUCTIONS

CBO-750 ASSEMBLY INSTRUCTIONS CBO-750 ASSEMBLY INSTRUCTIONS CBO-750 Ovens Should be Installed by a Professional or Suitably-Qualified Individual. Support Base The CBO-750 Oven Support Base must: be constructed of masonry or metal have

More information

VISIT OUR WEBSITE: OR CALL US TOLL FREE AT

VISIT OUR WEBSITE:   OR CALL US TOLL FREE AT Model #710 WATH THE VIEO Owner s Manual VISIT OUR WEBSITE: WWW.LIBERTYGARENPROUTS.OM OR ALL US TOLL FREE AT 1-866-820-5805 LIBERTY GAREN PROUTS, IN. 1161 SOUTH PARK RIVE, KERNERSVILLE N 27284 IMPORTANT:

More information

Safety Interlock Switches

Safety Interlock Switches r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables

More information

Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub

Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32 and 33 Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades are made

More information

NORMACLAMP Hose Clamps

NORMACLAMP Hose Clamps NORMACLAMP NORMACLAMP NORMACLAMP S/SP Sealing clamps (NORMACLAMP S) to DIN 3017, Retaining clamps (NORMACLAMP SP) to DIN 3016 Thanks to their robust clamping brackets with metric bolts the clamping force

More information

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns: 7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

S420 Barbecue Assembly Manual

S420 Barbecue Assembly Manual TM MC S420 Barbecue Assembly Manual 85-3062-2 (G45123) Propane 85-3063-0 (G45124) Natural Gas 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. Assemble your grill immediately. Missing

More information

9 LABORATORY ACCESSORY

9 LABORATORY ACCESSORY 9 NORMAG - LABORATORY GLASSWARE L 309 e.1 DRYING TUBES They serve for drying of gas with suitable desiccants. To avoid sticking of the packing during the process, not shape resistant desiccants (e.g. phosphorus

More information

SETHCO THERMOPLASTIC CHEMICAL SUMP PUMPS. UD/UV Series for Corrosive Liquids and Chemical Transfer

SETHCO THERMOPLASTIC CHEMICAL SUMP PUMPS. UD/UV Series for Corrosive Liquids and Chemical Transfer SETHCO THEROPLASTIC CHEICAL SUP PUPS UD/UV Series for Corrosive Liquids and Chemical Transfer SETHCO THEROPLASTIC CHEICAL SUP PUPS UD/UV SERIES FOR CORROSIVE LIQUIDS AND CHEICAL TRANSFER DESIGN FEATURES

More information

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G) Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature

More information

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

TOOLING COMPONENTS.  tel fax Clamping Kits Step Blocks...7. Driver Studs... Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...

More information

/2 HO DKB /4 HO DKA /4 HO DKB /2 HO DKA /2 HO DKB HO DKA

/2 HO DKB /4 HO DKA /4 HO DKB /2 HO DKA /2 HO DKB HO DKA Durapipe VKD Double Union Ball Valve Description: In-line double union ball valve Seats: PTFE End Connections: Solvent Sockets, Option: Electric or Pneumatic Actuation To convert the valve to threaded

More information

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns: 7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.

More information

4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post

4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,

More information

Ceramic Probe Replacement Instructions Accessory G

Ceramic Probe Replacement Instructions Accessory G Ceramic Probe Replacement Instructions Accessory G6600-60035 Purpose The Stainless Burner has two ceramic combustion tubes, which require periodic replacement: an inner and an outer tube. Scope This procedure

More information

CROSS HANDLE 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R ROUGH M1-2202

CROSS HANDLE 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R ROUGH M1-2202 INSTALLATION INSTRUCTIONS M-00 CROSS HANDLE -HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R-00 ROUGH M-0 LEVER -HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH CROSS

More information

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets SAVE FOR END USER ELKAY 2222 CAMDEN COURT OAK BROOK, IL 60523 USA WALL MOUNT ASSEMBLY General Instructions Turn off the water

More information

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit

More information

TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA

TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA TECHNICAL BROCHURE BPRIMELINE R1 Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA Prime Line A Full Range of Product Features Rugged Construction: Cast iron construction in close

More information