BHG 3 tier top 12' x 10' gazebo with net and sun panel ASSEMBLY INSTRUCTIONS ITEM# BH

Size: px

Start display at page:

Download "BHG 3 tier top 12' x 10' gazebo with net and sun panel ASSEMBLY INSTRUCTIONS ITEM# BH"

Kelley Knight
6 years ago
Views:

1 BHG 3 tier top 1' x 10' gazebo with net and sun panel ASSEMBLY INSTRUCTIONS ITEM# BH ATTENTION: THIS PRODUCT IS NOT OR COMMERCIAL USE INTENDED OR RESIDENTIAL USE ONLY. Questions, problems, missing parts with this product? Do not return to your retailer, please call our customer service department 9:00 a.m. to 5:00 p.m.eastern Standard Time Monday through riday Phone # contact us at 1

2 WARNINGS AND CAUTIONS *It is essential to place the gazebo on level ground and not less than 6 feet from any obstruction such as fences, garages, the house, overhanging branches, laundry lines, or electrical wires.assembly by four adults is *Assembly by four adults is recommended. *Oil all metallic moving parts during usage season. *Always remove the canopy in heavy wind conditions, otherwise the canopy may tip over and may cause damage to its parts. *The user of this gazebo should always inspect it before each use. *Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings. *Keep children away during assembly.this item contains small parts which can be swallowed by children.children should always be under direct adult supervision while using the product. *The manufacturer will not accept responsibly for unauthorized repair of modifications to the gazebo. *Retain the assembly instructions for future reference. CLEANING AND MAINTENANCE Wash frame parts and fabric with mild soap and water, rinse thoroughly. Dry frame completely and allow the fabric to drip dry. Do not use bleach, acid, or other solvents on the fabric or frame parts. Please inspect and tighten all bolts or fasteners on a regular basis to ensure proper performance and safety of your gazebo. Keep all flame and heat sources away from canopy fabric. The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric may render the flame-resistant properties ineffective.

3 Remove all components from the polybag and unwrap all package materials. Please count the components, there are: NO. Part Description Quantity A Leg Post 4 B Top Beam C Top Beam D Top Beam E Top Beam Canopy rame 1 G Supporting Bar 8 H Connecting bar 4 I Small Canopy abric 1 Center Canopy J 1 abric K Large Canopy abric 1 L Mosquito Net 1 M Apron Panel 4 3

4 I J K G H L M B C D E A 4

5 ACCESSERY NO. Part Description Quantity N1 M6x15L Bolt 0+ Spare N M6x0L Bolt 40+ Spare N3 M6x5L Bolt 16+1 Spare N4 M6x36L Bolt 8+1 Spare M6 Washer 9 N6 M6 Nut 8+1 Spare N7 U Shaped Bracket 4 N8 Bracket 8 N9 Allen Wrench N10 Hex wrench N11 Lawn Stake 8 N1 Allen wrench 1 N13 Touch-up Paint 1 Assembly k14 1 instructions sheet 5

7 Step1 N1 x 16 x 16 M6x15L Bolt M6 Metal Washer B N1 N1 C E N1 N1 D Please don t tighten the bolts fully at this step. Step N1 x 4 x 4 N7 x 4 M6x15L Bolt M6 Metal Washer U Shaped Bracket N1 N7 A Please don t tighten the bolts fully at this step. 6

8 Step3 N x 4 x 4 M6x0L Bolt B M6 Metal Washer C D E A N Please don t tighten the bolts fully at this step. Step4 N x 16 x 16 N8 x 8 M6x0L Bolt M6 Metal Washer Bracket D E B A C N N8 Please don t tighten the bolts fully at this step. 7

9 Step5 N3 x 16 x 16 M6x5L Bolt M6 Metal Washer N3 G G G Tighten all bolts of this step. E Step6 I I I Make sure the side of canopy fabric with a label and short corresponds to the canopy frame also with a label and short. 8

10 Step7 I J J K J I J K Make sure the side of canopy fabric with a label and short corresponds to the canopy frame also with a label and short. Step8 N4 x 8 x 16 N6 x 8 M6x36L Bolt M6 Metal Washer M6 Nut K B / C H K N4 N6 D / E N7 Make sure the side of the caonpy fabric with a label, corresponds to the top beam D&E with a label,top beam B&C with a label. Tighten all bolts of steps above. 9 N4 N6

11 Step9 N11 x 8 Lawn stake N11 N11 B / C L Hang the mosquito net (L) on the top beam (B,C). L Step10 M D / E M Make sure the side of the apron panel with a label corresponds to the top beam D&E also with a label. Your gazebo is ready for use. 10 Printed in China.

OWNER S MANUAL HEXAGONAL GAZEBO. Product code: UPC code: Vendor Item: SS-I-138-4GZ. Date of purchase: / /

OWNER S MANUAL HEXAGONAL GAZEBO. Product code: UPC code: Vendor Item: SS-I-138-4GZ. Date of purchase: / / OWNR S NU XON ZO Product code: 0-05231405-1 UP code: 79455 7483 Vendor tem: SS--138-4Z ate of purchase: / / 1 Special Warning ssemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo