Piston Seal CP Profile
|
|
- Hubert Lindsey
- 6 years ago
- Views:
Transcription
1 Piston Seal P Profile P Profile, PTFE Piston ap Seal atalog EPS 530/US The Parker P profile is a cap seal with anti-extrusion, low friction and low wear features. The P profile is a bi-directional piston seal for use in low to medium duty applications. The P profile retrofits into a standard size groove without modification. There are three P profiles to match the groove width for a single, with one back-up, or an with two back-up rings. ecause of the unique design of the filled PTFE cap, the P profile offers long wear, low friction and antiextrusion. ecause of its short assembly length, only minimal gland space is needed to fit the seal on the piston. Parker s P profile will retrofit non-parker seals of similar design. P0 a standard groove. P1 an groove designed for one back-up ring. P2 an groove designed for two back-up rings. The P profile may be ordered without the energizer by omitting the energizer code. See part number nomenclature. P ross-section Technical ata Temperature Pressure Surface Standard Materials* Range Range Speed ap % bronze -200 F to 55 F 3,500 psi < 13 ft/s filled PTFE (-129 to 302 ) (240 bar) (4 m/sec) Energizer 0 Nitrile -30 F to 250 F (-34 to 121 ) *lternate Materials: For applications that may require an alternate material, please see Section 3 for alternate PTFE (Table 3-4) and energizer (Table 3-5) materials. Pressure Range without wear rings (see Table 2-4, page 2-5). Options Notched side walls: dding an N to the end of the part number indicates that notches are to be added to the side walls of the PTFE cap. Notches can help optimize the seal s response to fluid pressure. In application, the void created by the notch allows fluid pressure to fill the cavity between the side face of the gland and the seal. onsult your local Parker Seal representative for the availability and cost to add side notches to the P profile. N = Notched walls P installed in Piston Gland 09/01/0-62 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
2 atalog EPS 530/US P Profile Part Nomenclature P Profile Table -50. P Profile Inch P Seal ompound 4-igit Material ode 0401 = 40 ronzefilled PTFE Profile 0 = No ack-up Ring 1 = 1 ack-up Ring 2 = 2 ack-up Ring Size ( ash Size) Option: N = Notched walls Energizer Material ode = 0 Nitrile Omit = No energizer See Table 3-5, page Gland imension P Profile Please refer to Engineering Section 2, Page 2-8 for surface finish and additional hardware considerations. Table -51. P Gland imensions Inch ore (P0) (P1) (P2) Piston * ash P Part (X = of +.002/ / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX /01/0-63 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
3 atalog EPS 530/US P Profile atalog EPS 530/US Table -51. P Gland imensions Inch (ontinued) ore (P0) (P1) (P2) Piston * +.002/ / / / / /-.001 ash P Part (X = of PX PX PX PX / / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX / / / / / / PX PX PX PX PX PX /01/0-64 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
4 atalog EPS 530/US P Profile Table -51. P Gland imensions Inch (ontinued) ore (P0) (P1) (P2) Piston * +.002/ / / / / /-.003 ash P Part (X = of PX PX PX / / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX / / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX /01/0-65 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
5 atalog EPS 530/US P Profile Table -51. P Gland imensions Inch (ontinued) ore (P0) (P1) (P2) Piston * +.002/ / / / / /-.003 ash P Part (X = of PX PX PX PX / / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX / / / / / / PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX / / / / / / PX PX PX PX PX /01/0-66 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
6 atalog EPS 530/US P Profile Table -51. P Gland imensions Inch (ontinued) ore (P0) (P1) (P2) Piston * +.002/ / / / / /-.004 ash P Part (X = of PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX PX-460 NOTE: For sizes larger than those shown in the table, please contact your local Parker Seal representative. 09/01/0-6 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
PTFE profile ring. PTFE glass MoS 2 compound. Elastomer profile ring
PTFE profile ring Elastomer profile ring Material PTFE profile ring Material PTFE bronze compound PTFE glass MoS 2 compound Code PTFE B602 PTFE GM201 Fig. 1 Elastomer profile ring Material Code Hardness
More informationPN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
More informationSIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi
2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless
More informationAdapters. The World Standard. Pipe Fittings. Metric Adapters. ISO Port Adapters. Garden Hose Fittings
Adapters Pipe ittings SAE Standards ryseal Threads orgings & Extrusions etric Adapters Economical Reusable orgings & Extrusions ISO Port Adapters eets ISO 649-3 Requirements eets SAE 2244-3 Requirements
More informationindustrial ball valves
Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with Gyrolok Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure
More informationMore of what you need to work smarter, faster, and better. Visit for up-tothe-minute. Accessories
More of what you need to work smarter, faster, and better. Visit for up-tothe-minute accessory selections. ccessories ccessories Visual Index atalog 4400 US Hose dapters 15T3 4-6 -6 4H3 41T3 Male - Female
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationGeotech Portable Bladder Pumps Installation and Operation Manual
Geotech Portable Bladder Pumps Installation and Operation Manual Rev. 6/25/2010 Part # 11150272 Table of Contents SYSTEM DESCRIPTION... P. 02 FUNCTION AND THEORY...P. 02 SYSTEM COMPONENTS...P. 02 SYSTEM
More informationLiberty Process Equipment, Inc.
AP - Operation & Assembly Speed, temperature, viscosity, suction lift, discharge pressure, abrasive content and corrosive action of the liquid be handled should all be considered in applying these pumps.
More informationGraphite Ribbon/Filament Packing for Fisher Sliding Stem Valves
Instruction Manual Graphite Packing for Sliding-Stem Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Storage and Startup...
More informationD Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks
5.2016.15.k 1 Swing Check Valves D Series / Screwed onnet Screwed End - Full Opening Ductile Iron Swing Checks C C Threaded Swing Checks Pressure 1 2 3 4 300# D300-1 D300-2 D300-3 D300-4 600# D600-1 D600-2
More informationMaintenance & Repair Instructions
brands you trust. Maintenance & Repair Instructions CRANE ChemPharma, Tufline Flanged 6 & 8 Process Ball Valves Figure 1. 2-Piece Ball Valves Tufline 521F, 523F Size: 6" - 8" Tufline 521R, 523R Size:
More informationSteel Flareless Ermeto Connectors
Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2
More informationOld-Style Aging Cell 316 Stainless Steel mL Capacity. Part No Instruction Manual. Updated 8/21/2014 Ver. 1.7
Old-Style Aging Cell 316 Stainless Steel - 500-mL Capacity Part No. 175-70 Instruction Manual Updated 8/21/2014 Ver. 1.7 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More information2-3-5 Valve Manifolds
2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision
More informationHose Fitting Selection Chart
LOW/MEIUM Hose Fitting Selection hart PERMNENT REUSLE SERIES SERIES N SH SIZE RNGE* Zinc Plated Steel 903 3630 (-03 to -12), 3R30, 3130, 37L, 3800, 3840, 3580, 3440 (-04 to -08), 30T (-04 to-08) 90H 3630
More information*Note: The current revision of the Standard is C but it changes periodically.
General Applications Apple O-Rings are available in a choice of six basic materials, each in a range of optional Durometer (Shore A) Hardnesses. Other materials available upon request. Buna-N/Nitrile:
More informationSKID STEER ATTACHMENT
www.erskineattachments.com EXTREME HEAVY-DUTY BRUSH MOWER SKID STEER ATTACHMENT THE ULTIMATE MOWING MACHINE... Extreme jobs call for the Extreme Heavy-Duty Brush Mower. This mower is armored to withstand
More informationMR98 Series Backpressure Regulators, Relief and Differential Relief valves
MR98 Series Instruction Manual January 2015 MR98 Series Backpressure Regulators, Relief and Differential Relief valves P1757 TyPe MR98L P1753 TyPe MR98H D103588X012 Figure 1. Typical MR98 Series Backpressure
More informationINSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL
BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the
More informationHose Assembly Equipment
atalog 4400 US ittings rimping -1 Products ivision atalog 4400 US Visual Index Model No. 339 & 239 - ut-off Machine Model No. 332T-115V - ut-off Machine Model No. 631075 - Karrykut ut-off Machine TH8-400
More informationAOP B Series Floating Ball Valves. Delivering dependability at an affordable price into upstream, general purpose valve applications
AOP B Series Floating Ball Valves Delivering dependability at an affordable price into upstream, general purpose valve applications AOP Series BUL Floating Ball Valves FEATURES AND BENEFITS One-piece carbon
More informationWILKINS 575A WILKINS 575 SIZE 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6"
WILKINS 575 WILKINS 575A 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6" DESCRIPTION The 575 is a reduced pressure assembly. Production began approximately 1975 under the Richwell model RP name. Around 1978 it
More informationAssembly Instructions: Square Tile Fire Pit With Embossed Side Panels
Assembly Instructions: Square Tile Fire Pit With Embossed Side Panels FT501PTESMLID Part List Part List Description Qty. Drawings Part # A Mantle Frame 1 8-07-00158-01-055 B Side Panel 4 8-20-00059-01-077
More informationJARVIS. Model 70 Airsnip Air Powered Scissors
Air Powered Scissors EQUIPMENT SELECTION... Ordering No. Airsnip Model 70... 4019009 Air Filter/Regulator/Lubricator.. 3022003 Balancer... 1350084 Power--Pak (250 PSI)... 4026016 TABLE OF CONTENTS... Page
More informationPARTS MANUAL. For AST and ATU Model Tuckunder Liftgates
A N T H O N Y L I F T G A T E S, I N C. PARTS MANUAL For AST and ATU Model Tuckunder Liftgates MODELS AST-1500-SF AST-2000-SF AST-2500-SF AST-3000-SF ASTL-1800-SF ASTL-2500-SF ATU-1800-SF ATU-2500-SF ATU-3000-SF
More informationVisit Crimpsource at your online resource for hose crimp specifications. Equipment
Visit rimpsource at www.parker.com/crimpsource, your online resource for hose crimp specifications. atalog 4400 US Visual Index Karrykrimp -8 Karrykrimp ench Mount -8 Karrykrimp 2-10 Karrykrimp 2 ench
More informationof Hydrogenated Nitrile Rubber Polymers Available
2 Types of Hydrogenated Nitrile Rubber Polymers Available 2.1 Introduction This chapter provides an overview of the types and grades of HNBR polymers commercially available and their performance characteristics
More information1. Product Name INSULTECH Thermal Blanket Design LT450SS. 2. Manufacturer. 3. Product Description THERMAL INSULATION
1. Product Name INSULTECH Thermal Blanket Design LT450SS 2. Manufacturer 75 Main Street North Tonawanda, NY 14120 Phone: 716-693-7954 Fax: 716-693-1647 E-mail: info@shannonent.com Web: www.blanket-insulation.com
More informationLegris Blowgun Range. A Large Selection to Suit all Applications
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding egris Blowgun Range A arge Selection to Suit all Applications Parker
More informationSPECIFICATIONS. For 1 8 OD Tubing FERRULES FOR 1 8 OD TUBING. One piece PTFE ferrule with SS casing1. One piece PTFE ferrule with SS casing2 008FT32
4 OMNI-LOK FITTING SYSTEMS OMNI-LOK TYPE P For 1 16, 1 8 or 3 16 OD semi-rigid tubing and ¼ -28 UNF, M6 or 5 16-24 UNF threaded flat-bottom ports Pressure rated up to 1000psi (69 bar) when hand-tight High
More informationHeavy Duty Waterproof Case
SOCKET TC-265 / TC266 / TC-267 Heavy Duty Waterproof Case Made of ABS thick resin, durable and anti-shock Large, corrosion resistant latches with padlock eye for better security and safety. W TC-265 H
More informationBEARING, SHAFTS, CLAMPS, COLLARS, HUBS & KEYS
BEARING, SHAFTS, CLAMPS, COLLARS, HUBS & KEYS HUBS Gear, Dial and Sprocket Assembies - Tech Info.... I 2 Phase Adjustable Hub...I 3 Gear, Sprocket and Dial Hubs...I 4 - I 6 Dual Gear Hubs...I 7 CLAMPS
More informationPilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
More informationAdapters New to Eaton Weatherhead How to Order
PPITIO T dapters ew to Eaton Weatherhead How to Order OW & EIU ew Eaton dapter Part umbers dapter part numbers consist of a base number followed by a size designation. If the part number contains a T character
More informationYour Artificial Lift Experts. Oilfield Equipment. upcglobal.com
Your Artificial Lift Experts Oilfield Equipment upcglobal.com Your Artificial Lift Experts Oilfield Equipment upcglobal.com No. 142 Stringing-Up Link No. 14 Triangle C Link The Stringing-up link is used
More informationHigh Performance Compression Packing
SHAFT SEALING SYSTEMS Duramax Ultra-X High Performance Compression Packing a Engineered Specifically for Heavy-Duty Marine Service - Stern Tube Stuffing Boxes - Bulkhead Stuffing Boxes - Rudder Stuffing
More informationAwning Windows Premium Atlantic Vinyl
TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations/Sizes: 1/4 Scale FullAwning... 2-4 GlazingOptions: 3 Scale... 2-6 Grille Patterns... 2-7 SectionDetails: 6 Scale... 2-8 JELD-WEN
More informationHayes Performance Systems 5800 W. Donges Bay Rd. Mequon, WI Tel: Web:
Hayes Performance Systems 5800 W. Donges Bay Rd. Mequon, WI 53092 Tel: 888.686.3472 Email: techsupport@hayesbicycle.com Web: www.hayescomponents.com Hayes Components Europe Dirnismaning 20 a 85748 Garching
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationSingle, oversized roller compresses a low friction hose through a full 360-degree rotation
Graco EP Series Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degree rotation More flow per revolution than conventional designs One hose compression per
More informationRussellstoll. Electrical Interconnection Systems. Dura-Gard Nonmetallic Waterproof Connections. The Next Generation: Dura-Gard
Dura-Gard Washdown Duty, Chemical, Outdoor, Industrial and Marine Use Nonmetallic Plugs, Connectors Receptacles and Inlets 20, 30 and, Maximum 600 VAC/250 VDC The Next Generation: Dura-Gard Severe environments
More informationUnion parts Data sheets
Union parts ata sheets Clamp IN IF RJT HpE HYGIENIC PROCESS EQUIPMENT LT Clamp fittings The clamp union originated in merica and is the standard used in the Pharmaceutical industry. The union consists
More informationHydraclaw Jacks. *dimensions are in mm. Powerful: 5 tonne capacity on head or toe. High Lift: 178mm. Fast Operation: 5.5mm lift per stroke
Hydraclaw Jacks Powerful: 5 tonne capacity on head or toe High Lift: 178mm Fast Operation: 5.5mm lift per stroke Stable: Substantial base offers stability under load Versatile: Horizontal or vertical operation
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationFBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information
FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated
More informationPOP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018
POP-UP OPTION USER HARDWARE MANUAL 0019850_REV_B 8/29/2018 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.edgetech.com ii The information, figures, and
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationFiltration Product Catalog
Filtration Product Catalog Sock / bag filter housing Sock / bag filter Dynalene's filtration products offer a comprehensive particulate removal solution that can be tailored to any fluid application. The
More informationDUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
More informationTechnical Specifications
Standard couplings with poppet valve. Faster interchangeability (except size 12,5). Standard couplings for general purpose applications with poppet valve shut-off system. Faster proprietary profile ( 1/2
More informationTuf-Lite III Fans 4000KW Series Hub
Tuf-Lite III Fans 4000KW Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 11 through 20 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass
More informationOUTDOOR SUNSHADE BLINDS
OUTDOOR SUNSHADE BLINDS OUTDOOR SUNSHADE BLINDS The Acmeda Zipscreen System is the ultimate external screening solution for any outdoor area or window. Specially designed for alfresco entertaining areas
More informationHose Reel Series L701/G701
Hose Reel Series L70/G70.0 WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationXPO. Ultra low NOx indirect burner
XPO Ultra low NOx indirect burner -.- E-i -9/ Low temperature burner for use with clean fuel gases Single digit NOx emissions at 0% igh efficiency with low requirements apacities up to 8 Mtu/h with a least
More informationApplications Engineering Notes
Applications Engineering Notes Document Title Document Number MTP Brand Connector Installation Onto AEN-1401 Revision Number 2.1 Effective Date November 15, 2011 THE USE OF SAFETY GLASSES FOR EYE PROTECTION
More informationVisit Crimpsource at your online resource for hose crimp specifications. Equipment
Visit rimpsource at www.parker.com/crimpsource, your online resource for hose crimp specifications. atalog 4400 US Visual Index Karrykrimp -8 Karrykrimp ench Mount -8 Karrykrimp 2-10 Karrykrimp 2 ench
More informationSafe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
More informationF PS L. Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems
G 33 G Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems CampbellCrimpnology... the only comprehensive package of crimping products in the industry! CampbellCrimpnology Crimpnology refers
More informationCARTRIDGE AND BAG UNIT. Passion for Filtration
CARTRIDGE AND BAG UNIT Passion for Filtration CARTRIDGE AND BAG FILTER UNITS CARTRIDGE AND BAG FILTER UNITS Cartridge and bag filter units are the most commonly used filter units in the filtration of fluids
More informationSafe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
More informationYCU 750 TU Unitized Curtain Wall System
ASSEMBLY INSTRUCTIONS Assembly Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS
More informationCARTER offers an outstanding source for your Precision Bearing needs
RTR offers an outstanding source for your Precision earing needs bout arter Manufacturing ompany: arter is a dynamic young company specializing in the manufacture of precision bearings. ecause of our size
More informationSUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops
More informationACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189
ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 HYDROSCAND ACCESSORIES PRODUCT GROUP 500, 505, 507 OCH 510 This product group includes products that complement Hydroscand s range of hoses and fluid connectors,
More informationModel SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless
More informationblac inc. : 04 : 15 HIGH PERFORMANCE HEAVY DUTY ACTUATOR DRS
blac inc. : 04 : 15 HIGH PERFORMANCE HEAVY DUTY ACTUATOR DRS RANGE OF BLAC INC. ACTUATORS Only BLAC INC. brings to its customers, a comprehensive range of products manufactured under an undivided roof
More informationBOTTLE CAPS & CONNECTION SYSTEMS
DURAN BOTTLE CAPS & CONNECTION SYSTEMS PART OF THE DURAN BOTTLE SYSTEM DURAN BOTTLE CAPS & CONNECTION SYSTEMS THE PERFECT MATCH FROM STANDARD TO SPECIAL In scientific procedures, nothing should be left
More informationUnshielded Fluid Hose Kit
Instructions Unshielded Fluid Hose Kit 308688C Kit Part No. 238995 Kit for converting the PRO 5500wb Spray Gun and the PRO Auto Xs wb Spray Gun to allow the use of a bare PTFE(unshielded) fluid hose. Order
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationBOTTLE CAPS & CONNECTION SYSTEMS
DURAN BOTTLE CAPS & CONNECTION SYSTEMS PART OF THE DURAN BOTTLE SYSTEM DURAN BOTTLE CAPS & CONNECTION SYSTEMS THE EVOLUTION OF THE DURAN BOTTLE SYSTEM Starting with the ORIGINAL in 1972, the DURAN laboratory
More informationIntroduction TEFLON PFA Filtration
Introduction TEFLON PFA Filtration The following pages are devoted to in-line filtration devices. Designs follow the popular 47 and 50 holders manufactured the past 23 years by Savillex Corp. Typical applications
More informationValue-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves. Installation, Maintenance and Operating Instructions
Value-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves Installation, Maintenance and Operating Instructions IMO-R24 5/2013 2 IMO-R24 Table of Contents 1 GENERAL....................................
More informationR-Flex, Flexitank for 40ft Reefer Containers Instructions Manual. rev
R-Flex, Flexitank for 40ft Reefer Containers Instructions Manual 1 Container Selection... Ensure that the below conditions are obtained. Reefer Container is no older than 5 years. Reefer Container is in
More informationSECTION SPECIFICATIONS PART 1 GENERAL
PART 1 GENERAL 1.1 SECTION INCLUDES A. Shower doors. B. Sliding enclosures. C. Shower doors and panels. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry; blocking. B. Section 15400 - Plumbing Fixtures
More informationTarp Return. Questions? Contact Customer Or Parts Diagrams see Parts and Diagrams section on web at
Roll Rite, LLC and its entire staff would like to not only Thank You but congratulate you on your purchase of one of what we feel to be the finest line of tarping systems in the industry. Tarp Return RR
More informationTENDABOX BX3000. Cassette awning with folding arms BX3000. Description. Options:
TENDABOX Description One-piece U-shaped protective cover (Dimension 179 x 145 mm), as from 500 cm total width protective cover inner reinforcement (Dimension 179 x 145 mm), of extruded aluminium profile
More informationOne Piece Low Torque Kelly Valve. Preventive Maintenance Service Video Disassembly and Assembly Procedures
One Piece Low Torque Kelly Valve Preventive Maintenance Service Video Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353
More informationBRAGI FUNCTIONAL LIGHT LINE FOR RETAIL, INDUSTRY AND WAREHOUSING
Nordeon Specifications Bragi FUNCTIONAL LIGHT LINE FOR RETAIL, INDUSTRY AND WAREHOUSING BRAGI Excellent lighting performance for main applications in retail, industry and warehousing Minimized total costs
More informationPRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS
PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS EARL S PRO LITE 350 HOSE IS ONE OF THE LIGHTEST AND MOST DURABLE HOSES AVAILABLE ON THE MARKET TODAY! Serious racers and street
More informationCompact Spiral Hose. Unprecedented performance and flexibility
Compact Spiral Hose Unprecedented performance and flexibility Unprecedented 5000- and 6000-psi hose performance in a compact design. Compared with conventional spiral hose, Parker s Compact Spiral TM 787TC/797TC
More informationPRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
More informationBOS-Ecoline Product Drawings Last Updated 2/14/2006
ROSE+BOPLA ENCLOSURES A PHOENIX MECANO COMPANY BOS-Ecoline Product Drawings Last Updated 2/14/2006 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com customerservice@rose-bopla.com
More informationSealing and terminating Wrexham Mineral Cables
Sealing and terminating Wrexham Mineral Cables A Termination is required at both ends of each length of cable, and it should be fitted as soon as the cable has been prepared. A complete termination consists
More informationEcON-O-fit HOSE clamps
PERFORMANCE ENGINE COOLING EcON-O-fit HOSE clamps ECON-O-FIT is the original anodized aluminum hose clamp cover. Its appearance dresses up any installation. ECON-O-FIT s specially designed interior grooving
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationMORIN B AND C SERIES ACTUATORS
MORIN B AND C SERIES ACTUATORS B series - Ductile iron w/ stainless steel cylinders, C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques
More informationNZ Product Guide. Wound Care
NZ Product Guide Wound Care FOR FURTHER INFORMATION CONTACT Customer Services FP 0800 658 814 FF 0800 830 660 e. customerservices@uslmedical.co.nz 2 www.uslmedical.co.nz Biatain Silicone Superior absorption
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationJ1000. Supreme MEADRAIN. Material: Polymer concrete
Material: Polymer concrete Lock: STANDARD locking device, CLIPFIX Edge Protection: Galvanized edge Accessories: Catchbasins Solid & outlet end caps Installation brackets Chair brackets J1000 13 J1000 Total
More informationFugitive Emission Test Report
Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationHoses and Accessories PTFE Hoses. Contents. Introduction
Contents Introduction... 1 Guidelines for fitting hose... 2 RX Eriflon-F 621 MD... 4 RX Eriflon-F 621 HD... 5 RX Eriflon-F 622 HD... 6 RX Eriflon-C4 Chlorine... 7 RX Eriflon-F 614... 8 RX Eriflon -F 511...
More informationseriesone PRODUCT OVERVIEW
PRODUCT OVERVIEW The shaft seal was designed for smaller, single-engine vessels with stainless steel propeller shafts. This shaft seal fits shaft diameters from /8 through 1 1/4 in 1/8 increments. It can
More informationTuf-Lite II Fans 8000 Series Hub
Tuf-Lite II Fans 8000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 through 40 Diameter Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationUpchurch LOW PRESSURE FITTINGS AND CONNECTORS
AND CONNECTORS Flangeless Fittings Upchurch Flangeless Fittings Upchurch Scientific Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
More informationTwo Piece Low Torque Kelly Valve
Two Piece Low Torque Kelly Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 SAFETY CONSIDERATIONS Safety glasses
More informationAmerican Classic Rear Terrain Hub Bearing Change, Cassette Body Swap and Overhaul Instructions.
12 x 142mm Thru Axle Retrofit Page 1 IDENTIFY YOUR TERRAIN HUB To identify, see the non-drive side of the hub (side without the cassette). Terrain hubs are in Terrain, Terrain Tubeless, and TCX Trekking
More informationLimit Switches. Butt Contacts. Belt Misalignment. EA700 Cam Action 2 N.O. - 2 N.C. EA800 Cam Action 2 N.O. - 2 N.C.
elt Misalignment imit Switches utt ontacts Switches for use on conveyor systems. Standard as well as Hazardous ocation versions. One step maintained, two step and two step maintained versions available.
More informationAerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:
More information