1260 West Riverside Drive rd Street SE Salem, VA Charlottesville, VA Toll Free: (866) Telephone: (434)

Transcription

1 1260 West Riverside Drive rd Street SE Salem, VA Charlottesville, VA Toll Free: (866) Telephone: (434) Version 1.0

2 Table of Contents Garden Rainwater Collector... 2 Downspout Filter Collector... 3 Standpipe Filter Collector... 4 WFF 100 Vortex Fine Filter... 5 WFF 150 Vortex Fine Filter... 6 WFF 300 Vortex Fine Filter... 7 Multisiphon/Overflow... 8 Floating Filters & Accessories... 9 Pumps & Accessories Solar Pump, RMS Controller, & Accessories Tanks Tank Fittings & Recharge Accessories Pre-Plumbed System Purification Equipment Commercial Applications Schematics: Day Tank System Schematics: Commercial Application Mission Statement To provide rainwater harvesting solutions designed to maintain high water quality with low maintenance systems. We will continue to educate others on the value of these solutions that will benefit generations of the future.

3 Garden Rainwater Collector (GRS) Filters up to 1,000 sq. ft. (440 microns) 2 GRS 110 VA 4 (110 mm) Filter top GRS 76 VA 3 (76 mm) Filter top Accessories Part # Mounting Clip & Screw SF Stainless steel mounting clip and screw. Hose & Tension Ring UV resistant plastic hose connects the GRS filter to a rain barrel or cistern. If additional length is necessary, the hose can connect to 1 PVC pipe. Blind Insert Stainless steel blind insert diverts 100% of the rainwater away from the rain barrel or cistern. Downspout Converter Kit -for use with 2x3 downspouts -for use with 3x4 downspouts DSK 2x3 DSK 3x4 3-4 Downspout Converter Kit DSK 2x3 or DSK 3x4 11 ¼ 7 2 Filter Top (76, 87, 100, 110 mm) Mounting Clip & Screw SF ¾ Filter Insert Housing Blind Insert Hose & Tension Ring 15803

4 Downspout Filter Collector (FS) Filters up to 1,600 sq. ft. (280 microns) 3 FS 110 VA 4 (110 mm) Filter top FS 0304 FS 76 VA 3 (76 mm) Filter top FS 0305 Accessories Part # Mounting Clip & Screw SF Stainless steel mounting clip and screw Hose & Tension Ring UV resistant plastic hose connects the FS filter to a rain barrel or cistern. If additional length is necessary, the hose can connect to 1 PVC pipe. Blind Insert BE Stainless steel blind insert diverts 100% of the rainwater away from the rain barrel or cistern. Downspout Converter Kit -for use with 2x3 downspouts -for use with 3x4 downspouts DSK 2x3 DSK 3x4 4 Downspout Converter Kit DSK 2x3 or DSK 3x4 18 7/8 11 ¼ Filter Top (76, 87, 100, 110 mm) Mounting Clip & Screw SF Filter Insert Housing Hose & Tension Ring Blind Insert BE 0301

5 Standpipe Filter Collector (STFS) Filters up to 2,000 sq. ft. (280 microns) 4 STFS 110 VA 4 (110 mm) Upper Housing SF 0304 Accessories Part # Mounting Clip & Screw SF Stainless steel mounting clip and screw Hose & Tension Ring UV resistant plastic hose connects the standpipe filter to a rain barrel or cistern. If additional length is necessary, the hose can connect to 1 PVC pipe. Blind Insert BE Stainless steel blind insert diverts 100% of the rainwater away from the rain barrel or cistern. Downspout Converter Kit -for use with 2x3 downspouts -for use with 3x4 downspouts DSK 2x3 DSK 3x Housing Upper Housing Mounting Clip & Screw SF Filter Insert 4 4 ¾ Hose & Tension Ring Blind Insert BE 0301

6 Vortex Fine Filter (WFF 100) Filters up to 2,000 sq. ft. (280 microns) 5 Model Part# WFF 100 Vortex Filter w/o Extension WF 2002 (Consists of housing, upper ring, lid, 12 handle, filter insert) WFF 100 Vortex Filter with Extension WF 2011 (Consists of same as above with 20 extension tube) Accessories Part # 20 Extension Tube-Below Ground: The polypropylene extension WV 1010 tube is used to bring the lid to grade for below ground applications. A maximum of three extensions can be added. If the filter is buried Deeper, a vault is recommended. Indoor recommendation: The polypropylene extension tube can be used to reduce the possibility of water splashing out of the lid during heavy rain events. 12 3/8 Lifting Handle- The lifting handle is used to remove the filter for maintenance. Longer lifting handles are available for use with filters with extensions. 25 Lifting Handle WA Lifting Handle WA Sieve Basket- The sieve basket rests in the bottom of the VS 0304 filter insert and restricts debris from flowing through overflow line. The sieve basket requires regular maintenance and must be cleaned frequently. Blind Insert- Stainless steel blind insert diverts 100% of the BE 0305 rainwater away from the rain barrel or cistern. 4 Mounting Bracket- Stainless steel mounting bracket is used to ensure the filter is mounted in accordance with the manufacturer s recommendation for above ground applications. Fixing Set- Used to secure and store the lifting handle in the filter WH0303 WA Extension Tube WV 1010 Lifting Handle (12, 25 or 39 ) WA0203, WA0303 Stainless Steel Mounting Bracket WH 0303 Blind Insert BE 0305 Sieve Basket VS 0304 Fixing Set WA0350

7 Vortex Fine Filter (WFF 150) Filters up to 5,500 sq. ft. (280 microns) 6 WFF 150 Vortex Filter w/o Extension WF 1002 (Consists of housing, upper ring, lid, 12 handle, filter insert) WFF 150 Vortex Filter with Extension WF 1011 (Consists of same as above with 20 extension tube) Accessories Part # 20 Extension Tube-Below Ground: The polypropylene extension tube is used to bring the lid to grade for below ground applications. A maximum of three extensions can be added. If the filter is buried WV 1010 deeper, a vault is recommended. Indoor recommendation: The polypropylene extension tube can be used to reduce the possibility of water splashing out of the lid during heavy rain events. Lifting Handle- The lifting handle is used to removed the filter insert for maintenance. Longer lifting handles are available for use with filters with extensions. 25 Lifting Handle WA Lifting Handle WA /8 Sieve Basket- The sieve basket rests in the bottom of the filter insert VS 0301 and restricts debris from flowing through overflow line. To sieve basket requires regular maintenance and must be cleaned frequently. 6 Blind Insert- Stainless steel blind insert diverts 100% of the rainwater BE 0306 away from the rain barrel or cistern /8 4 Mounting Bracket- Stainless steel mounting bracket is used to ensure the filter is mounted in accordance with the manufacturer s recommendation for above ground applications. WH Fixing Set- Used to secure and store the lifting handle in the filter WA Extension Tube WV 1010 Lifting Handle (25 or 39 ) WA0203, WA0303 Stainless Steel Mounting Bracket WH 0303 Blind Insert BE 0306 Sieve Basket VS 0301 Fixing Set WA0350

8 Vortex Fine Filter (WFF 300) Filters up to 32,000 sq. ft. (380 microns) 7 WFF 300 with 12 ton rated lid (Consists of lifting handle, child safety device, intermediate ring, manhole lid, stainless steel filter insert, filter housing, and stainless steel base plate) WFF 300 with 60 ton rated lid (Consists of lifting handle, child safety device, intermediate ring, manhole lid, stainless steel filter insert, filter housing, and stainless steel base plate) WFF 300 with Aluminum pedestrian traffic rated lid (Consists of lifting handle, child safety device, intermediate ring, manhole lid, stainless steel filter insert, filter housing, and stainless steel base plate) WF3011 WF3001 WF3012 Accessories Part # Stainless-steel extension handle -Length 1.6ft (50 cm) WA0307 -Length 2.5 ft (100 cm) WA 0309 Extension Tube- The polypropylene extension tube is used to bring the lid to grade for below ground applications. Maximum burial depth of the WFF300 is 48 and deeper burial requires a vault. Intermediate Ring- Necessary to connect the extension tube to the filter. RV1010 RS1020 Lid Intermediate Extension Handle 28 Lifting Handle ¾ Child Safety Intermediate Ring ½ Extension Tube Manhole Lid (Aluminum, 12ton, 60 ton) Stainless- Steel Filter Insert Filter Housing (upper and lower) Stainless-Steel Base plate

9 Multisiphon/Overflow 8 US1002 Multisiphon Multisiphon- offers back flow prevention and small animal protection US Multifunction overflow- Prevents drain odors, vermin US2000 protection, has stainless steel grid, & removes surface debris effectively. Multisiphon with integrated backflow prevention Prevents entry of vermin and sewage backwash from entering into the storage tank. Made of impact-resistant ABS plastic, small animal protection of stainless-steel. Connects to an overflow pipe inside the storage tank. Tilting resistant through a supporting strut Easy maintenance Removes surface debris effectively using a skimming effect Model Part# 4 Flap Valve BWVPVC400 Flap Valves Helps prevent the backflow of stormwater into the tank. Prevents vermin entry back into the tank. US Multifunction overflow BWVPVC400 4 Flap Valve Smoothing Inlet 4 Stainless Steel Smoothing Inlet EB Stainless Steel Smoothing Inlet RMS800 Wisy 8 Smoothing Inlet EB 0300 US EB0300 Stainless Steel Smoothing Inlet Made of 100% stainless steel Prevents turbidity and protects biofilm in the storage tank Helps aerate the water as it enters the tank RMS800

10 Floating Filters and Accessories 9 Floating Filters Part # 1 ¼ Coarse floating filter and hose-1200 micron SZ ¼ Fine floating filter and hose-300 micron SZ Coarse floating filter and hose-1200 micron SZ Fine floating filter and hose-300 micron SZ9931+ Each floating filter is supplied with a standard 7 length of food grade suction hose. Since the floating filter should be inspected at least annually, additional hose may be necessary to allow the floating filter to be lifted from the tank. Additional lengths of food grade suctions hose available for purchase. (Per ft) Fine Filter (Mesh size 0.3mm) Coarse Filter (Mesh size 1.22mm) Accessories Part # 22 cm ball for floating filters SK ¼ Brass check valve 504SB 2 Brass check valve 506SB Brass 1 ¼ MT to 1 ¼ Barb BRIA125M 2 brass female to barb fitting ZV0465 Brass 2 MT to 2 Barb BRIA200M 1 ¼ Food grade suction hose (per ft) 200SFG 1 ¼ 2 Food grade suction hose (per ft) 200SFG 2 Brass Check Valve (504SB, 506SB) 1 ¼ MT to Barb (BRIA125M) 2 FT to Barb (ZV0465) 2 MT to Barb (BRIA200M) Food Grade Suction Hose (1 ¼, 2 ) 200SFG 1 ¼, 200SFG2

11 Pumps 10 Model HP Voltage Phase 16SE /2 115/230 Single 1SC51D1BA+ ¾ 230 Single 1SC51E1CA Single 1SC51E1HA Single 1SC51E3HA Single/Three NOTE: All RMS pumps listed above are supplied with a stainless steel base plate, nozzle, check valve, and normally open float switch for pump protection. RMS also offers larger pumps with manufactured approved cooling jackets. Contact RMS for details. See page 16 for more details. Note: Variable Frequency Drives (VFD) are required to be equipped with three phase pumps. Model HP Voltage DSI Grundfos Mark III Jet Pump DS-MQ 3-45/220v Grundfos Mark III Jet Pump DSI Protection cover for MQ Mark III Pumps (For outdoor use) GR-3YU61 Garden Utility Pump 1/ Pump removes water down to 1/8. -Includes 6 ft. garden hose and suction strainer, as well as an extra impeller, cam ring, and O-ring. Pressure Tanks and Accessories GR-3YU61 DSI-14 DSI-20 TFP-TK252U 713TP 14 gallon pressure tank 20 gallon pressure tank 1 Tank tee package (Includes: tee, pressure switch, relief valve, boiler drain, and gauge) 1 ¼ Tank tee package Pump Accessories Normally Open Float Switch for pump protection Normally Open Float Switch

12 RainPerfect Solar Powered Rain Barrel Pump 11 RainPerfect Solar Pump RP-100 RainPerfect Solar Powered Rain Barrel Pump Simple, cost effective system. Uses no electricity, runs off of the solar panel charged by the sun and a NiMH battery. Can pump up to 100 gallons per charge at 13 PSI RMS Series 100 Controller RMS Series 100 Controller Specifically designed to monitor and control the RMS Rainwater Harvesting System The controller has many features including: o Automatic Activation of Back up Water o Controls dye or Chemical Injection o Provides Pump, UV, and Micron Filter Status o Monitors Flow Rates, and System Operating Pressure o Connects to Building Infrastructure through USB, Ethernet, or Wireless Accesories Ultrasonic Level Transmitter Paddle wheel flow sensor WFM Flow Meter LU P51530-H0 WFM202-3G1 P51530-H0 WFM202-3GI LU83

13 Tanks 12 Note: For pricing and freight estimates please contact RMS at (866) Rainwater Management Solutions represents all major tank manufacturers for above and/or below ground applications regardless of size. In an effort to ensure the rainwater storage tank is sized properly, RMS developed tank sizing software that uses several years of rainfall data in your zip code combined with the available collection area and demand to provide you with the most cost effective solutions to your rainwater storage needs.

14 Tank Fittings 13 Fittings and Components Part # 1 Double Threaded Poly Bulkhead AL ¼ Double Threaded Poly Bulkhead AL ¼ 2 Double Threaded Poly Bulkhead AL Double Threaded Poly Bulkhead AL Double Threaded Poly Bulkhead Tank Gasket Fernco fitting PS564X4 Aquatel D110 Wireless Level Sensor D110 Aquatel Antenna Extension Cable 2.4m AQC24 Aquatel Tank Sender Unit for D110 T Aquatel D110 Bulkhead fittings 4 Fernco fitting Tank Recharge Accessories Components Part # ¾ ASCO Slow Closing Normally Closed Solenoid Valve Slow Closing Normally Closed Solenoid Valve 3UL38 1 ½ Slow Closing Normally Closed Solenoid Valve 3UL40 2 Slow Closing Normally Closed Solenoid Valve 3UL41 N/C Float switch for control over recharge/bypass S Watts Backflow Preventer 909M1QTS ¾ Wisy Air Gap (Stainless Steel) TW ½ Wisy Air Gap (Stainless Steel) TW Wisy Air Gap (Stainless Steel) TW9908 Note: For pricing please contact RMS at (866) Watts RPZ Backflow Preventer Normally Closed Float Switch Wisy Air Gap (3/4, 1 ½, 2 ) Slow Closing N/C Solenoid Valve

15 Pre-plumbed System Package 14 RMS 1060 Pre-plumbed System Components Wisy Tank RMS 1060 Pre-plumbed System Vortex 100 with 20 extension 4 Smoothing inlet Multisiphon Backflow Preventer Stainless Steel Mounting Bracket 1 ¼ Coarse Floating Filter w/ 7 hose Roth 1060 Gallon 2-6, 2-12 Manhole extensions Pump Fittings Goulds 16SE0511 ½ HP 115v N/O Float Switch for pump protection 20 Gallon Pressure Tank 1 Tank Tee Package 2-4 Tank Gaskets 2-4 Ferncos 2-1 ¼ Bulkheads Various 4 sch 35 PVC fittings Note: This pre-plumbed system can be assembled in less than one hour with the included pre-cut materials and full installation instructions. This package is also available with a 1,500 gallon tank as well. Please contact RMS for more information about this package. Note: For pricing please contact RMS at (866)

16 Purification Equipment 15 PURKIT PURKIT15GPM Purification Kits Includes all necessary filters, housings, and accessories to remove particulate Includes all UV light which treats biological contamination Properly sized and installed purification kits can treat water to a potable level A CERTIFIED WATER TEST MUST BE PERFORMED TO CONSIDER WATER POTABLE. PURSKID PURSKID15GPM PURSKID15 Pre-plumbed, pressure tested preassembled purification skid is mounted on a skid. Includes Gauges and Valves Mounted filter housings, with 1 micron string wound filter, carbon filter, and 15GPM UV light Skid available with or without 1 HP, 115/220V MQ Mark III Grundfos Pump Properly sized and installed purification skids can treat water to a potable level A CERTIFIED WATER TEST MUST BE PERFORMED TO CONSIDER WATER POTABLE. RMS has Purification Kits and Skids with or without pumps for providing additional purification and filtration available in various sizes to meet most flow rates. Micron filtration is available from 1 to 100 microns and UV Purification Lights are available from 8GPM to 1250 GPM. Contact RMS to learn more: Component Part # -8 gallon per min UV Light EV-8E -15 gallon per min UV Light EV-12E

17 Commercial Applications 16 RMS offers a variety of skid options depending on your project needs. RMS has obtained manufacturer s approval to encase a standard well pump in a RMS manufactured cooling jacket which provides a way to connect the floating filter to a standard well pump and lay the pump 15% past horizontal to maximize the tank storage and increase the output capability. This allows RMS to put high flow submersible pumps in rainwater tanks to reduce the cost of redundant pumping systems. Pump Cooling Jacket For over 10 years, Rainwater Management Solutions (RMS) has been focused on overall site water needs, with an emphasis on rainwater harvesting. As a company, RMS designs, builds and supplies products for hundreds of rainwater harvesting systems per year. In addition, RMS staff brings a wealth of experience in government administration, lobbying, science and site/utility contracting. This broad range of staff backgrounds makes RMS uniquely suited to address all of your needs on a rainwater harvesting project. This catalog serves as an introduction to some of the core products offered by RMS. In addition to these products, we offer custom solutions for any size project as well as design consulting. Please contact the main office at for product questions and contact the Charlottesville, VA office at for design assistance. You can also visit our website at We look forward to working with you.

18 Schematics-Day Tank System 17

19 Schematics-Commercial Application 18