QUALITY DETAIL CUSTOM KITS THE COMPANY THINGS TO REMEMBER WHEN ORDERING:

Transcription

1

2 THE COMPANY Founded in 1983, Micro-Trim, Inc. has long been known as the headquarters for the manufacturing of custom trim kits for the installation of microwave ovens, cooktops and thermal ovens. Micro-Trim employs an in-house sales staff to work with you on your special and everyday requirements. Experienced order personnel assures you of prompt, on-the-spot telephone service at all times. Trim kit manufacturing is our only business...and we are good at it. Give us a call to assist you with your next installation. QUALITY DETAIL Custom trim kits from Micro-Trim are manufactured for use with most appliances new and old. They are fabricated from high quality aluminum, then color powder coated or anodized for a fine finish. The kit provides an attractively styled, easily installed product. A complete line of kits are available to fit your personal requirements whether your project is a simple appliance change out, a complete remodel, a new home, or a tract of new homes. To compliment your installation, kits are available in: Black White Stainless Steel Finish CUSTOM KITS Many new installations present a need for something other than a standard trim kit. Our ability to manufacture custom kits is unequaled and custom products make up a large percentage of our business. Installations such as: Custom Kits to cover existing openings larger or s m a l l e r t h a n t h e recommended opening; Matching Width Kits that will match the width of a thermal oven of a greater width; Full Length Kits to enclose both microwave and thermal ovens of a smaller width; Oven Fillers when replacing a thermal oven of a smaller height dimension; Oven Rings when installing a replacement thermal oven into a wider cut-out dimension; and Cooktop Trim Kits when installing a cooktop into an oversized existing countertop opening and many more. The illustrations in this brochure will help you when ordering a kit from our custom line. THINGS TO REMEMBER WHEN ORDERING: The following information is required and necessary when ordering a MICROWAVE OVEN TRIM KIT. 1. Oven manufacturer s name. 2. Oven model number. 3. Existing cabinet cut-out size, if any. 4. Will microwave oven be installed over a thermal oven? (If yes, make & model of oven or just oven width is required) Since microwave ovens vary greatly in size, there may be occasions where additional measurements may be required on some installations to insure a properly fitting kit. For your convenience when ordering, we would be pleased to furnish you with our easy to use Telephone/Fax Order Planning Form. We have designed this form with you in mind for fast ordering in a simple format that you can telephone or fax in with ease!

3 MICROWAVE TRIM-KITS MICROWAVE TRIM-KITS Matching Width Custom Kit Used on bi-level installations when the width of the microwave oven is less than that of the thermal oven and matching widths are desired. Standard Kit Used on most installations where no prior cabinet cut-out exists and our recommended cut-out is used. Limited Area Custom Kit Used on installations where the existing opening height is limited. Not recommended for use with Micro- Convection combo ovens. Other venting should be utilized in all installations.

4 MICROWAVE TRIM-KITS Extra Height Top Custom Kit Oversized top ventilator strips can be used when a pre-existing cabinet cut-out height is greater than our recommended opening height. MICROWAVE TRIM-KITS Full Length Custom Kit For bi-level installations when the microwave oven is a greater width than that of the thermal oven, and a full length one piece trim kit is desired. Extra Height Top & Bottom Custom Kit Oversized top and bottom ventilator strips can be used when a pre-existing cabinet cut-out height is greater than our recommended opening height.

5 OVEN RINGS OVEN RINGS Thermal Oven Rings Used when an existing cabinet opening is larger than the replacement thermal oven. Oven Rings can be built to a variety of sizes depending on the existing opening. When ordering, please specify make and model number of the thermal oven and the existing cabinet opening. Oven Rings are available in: Black White Stainless Steel Finish BEFORE AFTER Color Samples White Black Stainless Steel Finish

6 MICROWAVE FILLER KITS MICROWAVE FILLER KITS Microwave Filler Kits Used to fill gaps on each side of an over-the-range microwave when the space between the cabinets is too wide. Standard Sizes: 3 W x 11 D x 15 3/4 H & 6 W x 11 D x 15 3 / 4 H Custom sizes are available. Microwave Filler Kits are available in: Black White Stainless Steel NOTE: Filler Kits must be installed before the microwave. BEFORE Ordering Information: AFTER Custom Sizes Available A - Required B - Required C - Required 1. MANUFACTURER S MAKE 2. MODEL NUMBER 3. OPENING IN CABINET (see drawing - right) C B A

7 SLIDE-IN RANGE FILLERS SLIDE-IN RANGE FILLERS Slide-In Range Fillers Used when the existing counter top depth is greater than the existing slide-in or drop-in range. Slide-In Range Fillers are available in: Black White Stainless Steel Finish BEFORE AFTER Ordering Information: 1. MANUFACTURER S MAKE 2. MODEL NUMBER OR WIDTH OF SLIDE-IN RANGE (E) 3. EXISTING GAP SIZE TO BE FILLED (see drawing - right))

8 OVEN FILLERS OVEN FILLERS VENTED Oven Fillers Used when the existing opening height is larger than the height of the replacement thermal oven. Filler Strips come in a variety of sizes, from 1 1/16 to 8 5/8 high. Fillers come in solid or vented and are usually placed below the thermal oven. When ordering, please specify solid or vented, width and height of filler needed. Oven Fillers are available in: Black White Stainless Steel Finish SOLID Standard Filler 1 1/6 to 2 3/16 Standard Filler 1 1/6 to 2 3/16 Extra Height Filler 2 3/8 to 4 5/16 Extra Height Filler 2 3/8 to 4 5/16 Double Filler 4 3/8 to 8 5/8 Double Filler 4 3/8 to 8 5/8 BEFORE AFTER

9 COOKTOP TRIM-KITS COOKTOP TRIM-KITS One-piece seamless kits Designed to fit almost any countertop opening Allows a wide variety of cooktop choices For use when installing almost any desired cooktop into an oversized existing countertop opening. These kits alleviate the extra expense of re-tiling or replacing the existing countertop. Each kit is fabricated out of sturdy aluminum according to your specifications. Trim Kit Note: Cooktop Trim Kits are cosmetic only and are not designed to support the weight of the cooktop. Some countertop modifications may be necessary for support. Cooktop Trim Kits are available in: Black White Stainless Steel Finish Finished Installation Things to Remember When Ordering A - Required B - Required C - If Available D - If Available F - If Available 1. MANUFACTURER S MAKE MODEL NUMBER EXISTING OPENING IN COUNTERTOP (see drawing - right))

10