Plug-in/solder terminals with LED indicator
|
|
|
- Christian Norman
- 6 years ago
- Views:
Transcription
1 General-purpose Relay LY Electromechanical Relays A Miniature Power Relay Equipped with arc barrier. Dielectric strength: 2,000 V. Built-in diode models added to the LY Series. Single-pole and double-pole models are applicable to operating coils with ratings of 100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC, or 100/110 VDC). Three-pole and four-pole models are applicable to operating coils with ratings of 100/110 VAC, 200/220 VAC, or 100/110 VDC). Ordering Information LR Open Relays Type Contact form Plug-in/solder terminals Plug-in/solder terminals with LED indicator PCB terminals Upper-mounting Plug-in/solder terminals Standard SPDT LY1 LY1N LY1-0 LY1F DPDT LY2 LY2N LY2-0 LY2F DPDT (bifurcated) LY2Z LY2ZN LY2Z-0 LY2ZF PDT LY LYN LY-0 LYF 4PDT LY4 LY4N LY4-0 LY4F With built-in diode SPDT LY1-D LY1N-D (DC only) DPDT LY2-D LY2N-D DPDT (bifurcated) LY2Z-D LY2ZN-D PDT LY-D PDT LY4-D LY4N-D With built-in CR SPDT (AC only) DPDT LY2-CR LY2N-CR DPDT (bifurcated) LY2Z-CR LY2ZN-CR Note: 1. When ordering, add the rated coil to the model number. Rated coil s are given in the coil ratings table. Example: LY2, 6 VAC Rated coil 2. Relays with #187 quick connect terminals are also available with SPDT and DPDT contact. Ask your OMRON representative for details.. SEV models are standard Relays excluding DPDT (bifurcated) models. 4. VDE- or LR- qualifying Relays must be specified when ordering. General-purpose Relay LY A-1
2 Accessories (Order Separately) Sockets Poles Front-connecting Socket Back-connecting Socket DIN track/screw terminals Plug-in/solder terminals Wrapping terminals PCB terminals 1 or 2 PTF08A-E, PTF08A PT08 PT08QN PT08-0 PTF11A PT11 PT11QN PT PTF14A-E, PTF14A PT14 PT14QN PT14-0 Note: 1. For PTF08-E and PTF14A-E, see Track Mounted Socket. 2. PTF@A (-E) Sockets have met UL and CSA standards: UL 08/CSA C22.2. Mounting Plates for Sockets Socket model For 1 Socket For 10 Sockets For 12 Sockets For 18 Sockets PT08 PYP PYP-18 PT08QN PT11 PTP PTP PT11QN PT14 PT14QN PTP-1 PTP Socket-Hold-down Clip Pairings Relay type Poles Front-connecting Sockets Back-connecting Sockets Socket model Clip model Socket model Clip model Standard, bifurcated contacts operation 1, 2 PTF08A-E, PTF08A PYC-A1 PT08(QN), PT08-0 PYC-P indicator, built-in diode PTF11A PT11(QN), PT PTF14A-E, PTF14A PT14(QN), PT14-0 CR circuit 2 PTF08A-E, PTF08A Y92H- PT08(QN), PT08-0 PYC-1 Specifications Coil Ratings Single- and Double-pole Relays Rated Rated current Coil resistance Note: See notes on the bottom of next page. Coil inductance (reference value) Must operate Must release Max. Power consum. (approx.) 0 Hz 60 Hz Arm. OFF Arm. ON % of rated AC 6 V ma 18 ma 12.2 Ω 0.04 H 0.08 H 80% 0% min. 110% 1.0 to 1.2 VA 12 V 106. ma 91 ma 46 Ω 0.17 H 0. H (60 Hz) 24 V.8 ma 46 ma 180 Ω 0.69 H 1.0 H 0 V 2.7 ma 22 ma 788 Ω.22 H.66 H 100/110 V 11.7/12.9 ma 10/11 ma,70 Ω 14.4 H 24.6 H 0.9 to 1 VA 110/120 V 9.9/10.8 ma 8.4/9.2 ma 4,40 Ω H 2.1 H (60 Hz) 200/220 V 6.2/6.8 ma./.8 ma 12,90 Ω 4.7 H H 220/240 V 4.8/. ma 4.2/4.6 ma 18,790 Ω 8.0 H 10 H DC 6 V 10 ma 40 Ω 0.16 H 0. H 10% min. 0.9 W 12 V 7 ma 160 Ω 0.7 H 1.7 H 24 V 6.9 ma 60 Ω.20 H.72 H 48 V 18. ma 2,600 Ω 10.6 H 21.0 H 100/110 V 9.1/10 ma 11,000 Ω 4.6 H 86.2 H A-2 General-purpose Relay LY
3 Three-pole Relays Rated Rated current Coil resistance Coil inductance (reference value) Must operate Must release Max. Power consum. (approx) 0 Hz 60 Hz Arm. OFF Arm. ON % of rated AC 6 V 10 ma 270 ma 6.7 Ω 0.0 H 0.0 H 80% 0% min. 110% 1.6 to 2.0 VA 12 V 19 ma 14 ma 24 Ω 0.12 H 0.21 H (60 Hz) 24 V 80 ma 67 ma 100 Ω 0.44 H 0.79 H 0 V 8 ma ma 410 Ω 2.24 H.87 H 100/110 V 14.1/16 ma 12.4/1.7 ma 2,00 Ω 1 H 18. H 200/220 V 9.0/10.0 ma 7.7/8. ma 8,60 Ω 4.8 H 9. H DC 6 V 24 ma 2.7 Ω 0.11 H 0.21 H 10% min. 1.4 W 12 V 112 ma 107 Ω 0.4 H 0.98 H 24 V 8.6 ma 410 Ω 1.89 H.87 H 48 V 28.2 ma 1,700 Ω 8. H 1.9 H 100/110 V 12.7/1 ma 8,00 Ω 29.6 H 4. H Electromechanical Relays Note: See notes under next table. Four-pole Relays Rated Rated current Coil resistance Coil inductance (reference value) Must operate Must release Max. Power consum. (approx) 0 Hz 60 Hz Arm. OFF Arm. ON % of rated AC 6 V 86 ma 0 ma Ω 0.02 H 0.04 H 80% 0% min. 110% 1.9 to 12 V 199 ma 170 ma 20 Ω 0.10 H 0.17 H 2. VA (60 Hz) 24 V 9.6 ma 80 ma 78 Ω 0.8 H 0.67 H 0 V 46.8 ma 40 ma 0 Ω 1.74 H 2.88 H 100/110 V 22./2. ma 19/21.8 ma 1,600 Ω 1 H 17. H 200/220 V 11./1.1 ma 9.8/11.2 ma 6,700 Ω.1 H 7.9 H DC 6 V 240 ma 2 Ω 0.09 H 0.21 H 10% min. 1. W 12 V 120 ma 100 Ω 0.9 H 0.84 H 24 V 69 ma 0 Ω 1.41 H 2.91 H 48 V 0 ma 1,600 Ω 6.9 H 1.6 H 100/110 V 1/1.9 ma 6,900 Ω 2 H 6.7 H Note: 1. The rated current and coil resistance are measured at a coil temperature of 2 C with tolerances of +1%/ 20% for rated currents and ±1% for DC coil resistance. 2. Performance characteristic data are measured at a coil temperatures of 2 C.. AC coil resistance and impedance are provided as reference values (at 60 Hz). 4. Power consumption drop was measured for the above data. When driving transistors, check leakage current and connect a bleeder resistor if required. General-purpose Relay LY A-
4 Contact Ratings Relay Single contact Bifurcated contacts 1-pole 2-, - or 4-pole 2-pole Load Resistive load (cosφ = 1) Resistive load (cosφ = 1) Resistive load (cosφ = 1) Rated load Rated carry current Max. switching Max. switching current Max. switching power Failure rate (reference value)* *Note: 110 VAC 1 A 24 VDC 1 A P level: λ 60 = 0.1 x 10-6 /operation, reference value Characteristics Inductive load (cosφ=0.4, L/R=7 ms) 110 VAC 10 A 24 VDC 7 A 110 VAC 10 A 24 VDC 10 A Inductive load (cosφ=0.4, L/R=7 ms) 110 VAC 7. A 24 VDC A 1 A 10 A 7 A 20 VAC 12 VDC 20 VAC 12 VDC 1 A 10 A 7 A 1,700 VA 60 W 1,100 VA 170 W 1,100 VA 240 W 82 VA 120 W 110 VAC A 24 VDC A 20 VAC 12 VDC 0 VA 120 W 100 ma, VDC 100 ma, VDC 10 ma, VDC Inductive load (cosφ=0.4, L/R=7 ms) 110 VAC 4 A 24 VDC 4A 440 VA 100 W Item All except Relays with bifurcated contacts Relays with bifurcated contacts Contact resistance 0 mω Operate time 2 ms Release time 2 ms Max. operating frequency Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance 100 MΩ min. (at 00 VDC) Dielectric strength 1,000 VAC, 0/60 Hz for 1 min between contacts of same polarity 2,000 VAC, 0/60 Hz for 1 min between contacts of different polarity Vibration resistance Destruction: 10 to to 10 Hz, mm single amplitude (1.0 mm double amplitude) Malfunction: 10 to to 10 Hz, mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: 1,000 m/s 2 Malfunction: 200 m/s 2 Endurance Mechanical: AC: 0,000,000 operations min. (at 18,000 operations/hr) DC: 1,00,000,000 operations min. (at 18,000 operations/hr) Electrical: Single-, three-, and four-pole: 200,000 operations min. (at 1,800 operations/hr under rated load) Double-pole: 00,000 operations min. (at 1,800 operations/hr under rated load) Ambient temperature* Operating: Single- and double-pole standard, bifurcated-contact Relays: 2 C to C (with no icing) ( 2 C to 70 C if carry current is 4 A or less) All other Relays: 2 C to 40 C (with no icing) ( 2 C to C if carry current is 4 A or less) Ambient humidity Operating: % to 8% Weight Single- and double-pole: approx. 40 g, three-pole: approx. 0 g, four-pole: approx. 70 g Note: 1. The values given above are initial values. 2. The upper limit of 40 C for some Relays is because of the relationship between diode junction temperature and the element used. A-4 General-purpose Relay LY
5 Endurance Under Real Loads (reference only) LY1 Electromechanical Relays Rated Load type Conditions Operating frequency Electrical life 100 VAC AC motor 400 W, 100 VAC single-phase with -A inrush ON for 10 s, OFF for 0 s 0,000 operations current, 7-A current AC lamp 00 W, 100 VAC with 1-A inrush current, ON for s, OFF for s 100,000 operations -A current 00 W, 100 VAC with 78-A inrush current, -A current 2,000 operations LY2 LY4 Capacitor (2,000 µf) AC solenoid 24 VDC with 0-A inrush current, 1-A current 0 VA with 2.-A inrush current, 0.2-A current 100 VA with -A inrush current, -A current ON for 1 s, OFF for 6 s ON for 1 s, OFF for 2 s 100,000 operations 1,00,000 operations 800,000 operations Rated Load type Conditions Operating frequency Electrical life 100 VAC AC motor 200 W, 100 VAC single-phase with 2-A inrush ON for 10 s, OFF for 0 s 200,000 operations current, -A current AC lamp 00 W, 100 VAC with 1-A inrush current, ON for s, OFF for s 80,000 operations -A current Capacitor (2,000 µf) AC solenoid 24 VDC with 0-A inrush current, 1-A current 24 VDC with 20-A inrush current, 1-A current 0 VA with 2.-A inrush current, 0.2-A current 100 VA with -A inrush current, -A current ON for 1 s, OFF for 1 s ON for 1 s, OFF for 2 s 10,000 operations 10,000 operations 1,000,000 operations 00,000 operations Rated Load type Conditions Operating frequency Electrical life 100 VAC AC motor 200 W, 200 VAC triple-phase with -A inrush ON for 10 s, OFF for 0 s 00,000 operations current, 1-A current 70 W, 200 VAC triple-phase with 18-A inrush current,. A current 70,000 operations AC lamp 00 W, 100 VAC with 1-A inrush current, ON for s, OFF for s 0,000 operations -A current Capacitor (2,000 µf) AC solenoid 24 VDC with 0-A inrush current, 1-A current 24 VDC with 20-A inrush current, 1-A current 0 VA with 2.-A inrush current, 0.2-A current 100 VA with -A inrush current, -A current ON for 1 s, OFF for 1 s ON for 1 s, OFF for 2 s ON for 1 s, OFF for 2 s,000 operations 200,000 operations 1,000,000 operations 00,000 operations General-purpose Relay LY A-
6 Approved Standards UL 08 Recognitions (File No. 4164) No. of poles Coil ratings Contact ratings Operations 1 6 to 240 VAC 6 to 12 VDC 1 A, 0 VDC (Resistive) 1 A, 240 VAC (General use) TV-, 120 VAC 1/2 HP, 120 VAC 2 1 A, 28 VDC (Resistive) 1 A, 120 VAC (Resistive) 12 A, 240 VAC (General use) 1/2 HP, 120 VAC 6 x 10 2 x 10 6 x 10 2 x 10 and 4 10 A, 0 VDC (Resistive) 10 A, 240 VAC (General use) 1/ HP, 240 VAC 6 x 10 CSA 22.2 No. 14 Listings (File No. LR1928) No. of poles Coil ratings Contact ratings Operations 1 6 to 240 VAC 6 to 12 VDC SEV Listings (File No. D,1/17) TÜV (File No. R921226) (IEC2) VDE Recognitions (No. 990UG and 9947UG) LR Recognitions (No. 6KOB-2042) 1 A, 0 VDC (Resistive) 1 A, 120 VAC (General use) 1/2 HP, 120 VAC TV-, 120 VAC 2 1 A, 0 VDC (Resistive) 1 A, 120 VAC (Resistive) 1/2 HP, 120 VAC TV-, 120 VAC and 4 10 A, 0 VDC (Resistive) 10 A, 240 VAC (General use) 6 x 10 2 x 10 6 x 10 No. of poles Coil ratings Contact ratings Operations 1 6 to 240 VAC 6 to 12 VDC 1 A, 24 VDC 1 A, 220 VAC 2 to 4 10 A, 24 VDC 10 A, 220 VAC 6 x 10 No. of poles Coil ratings Contact ratings Operations 1 to 4 6 to 12 VDC 6 to 240 VAC LY1, LY1-FD 1 A, 110 VAC (cosφ=1) 10 A, 110 VAC (cosφ=0.4) LY2, LY2-FD, LY, LY-FD, LY4, LY4-FD 10 A, 110 VAC (cosφ=1) 7. A, 110 VAC (cosφ=0.4) 100 x 10 No. of poles Coil ratings Contact ratings Operations 1 6, 12, 24, 0, 110, 220 VAC 6, 12, 24, 48, 110 VDC 10 A, 220 VAC (cosφ=1) 7 A, 220 VAC (cosφ=0.4) 10 A, 28 VDC (L/R=0 ms) 7 A, 28 VDC (L/R=7 ms) 2 7 A, 220 VAC (cosφ=1) 4 A, 220 VAC (cosφ=0.4) 7 A, 28 VDC (L/R=0 ms) 4 A, 28 VDC (L/R=7 ms) 200 x 10 No. of poles Coil ratings Contact ratings 2, 4 6 to 240 VAC 6 to 110 VDC 7. A, 20 VAC (PF0.4) A, 24 VDC (L/R=7 ms) A-6 General-purpose Relay LY
7 Engineering Data LY1 Maximum Switching Power Endurance Electromechanical Relays DC L/R = 7 ms AC (cosφ = 0.4) DC resistive load AC resistive load Life: 200,000 operations Endurance (x10 operations) 10,000,000 1, VAC resistive load 24 VDC resistive load VDC (L/R = 7ms) 110 VAC (cosφ = 0.4) ,000 Switching (V) LY2 Maximum Switching Power Endurance DC L/R = 7 ms DC resistive load AC (cosφ = 0.4) AC resistive load Life: 00,000 operations Endurance (x10 operations) 1,0000,000 1, VDC resistive load 110 VAC resistive load 110 VAC (cosφ = 0.4) 24 VDC (L/R = 7ms) LY and LY , Switching (V) Maximum Switching Power Endurance DC L/R = 7 ms DC resistive load AC (cosφ = 0.4) AC resistive load Life: 200,000 operations Endurance (x10 operations) 1,0000,000 1, VDC resistive load 110 VAC resistive load 110 VAC (cosφ = 0.4) 24 VDC (L/R = 7ms) , Switching (V) General-purpose Relay LY A-7
8 LY2Z Maximum Switching Power Endurance 10 1 DC L/R = 7 ms DC resistive load AC resistive load AC (cosφ = 0.4) Endurance (x10 operations) 10,000,000 1, VDC resistive load 110 VAC resistive load 110 VAC (cosφ = 0.4) 24 VDC (L/R = 7ms) Life: 00,000 operations ,000 Switching (V) Dimensions Note: All units are in millimeters unless otherwise indicated. Relays with Solder/Plug-in Terminals LY1 LY1N (-D2) LY1-D Eight, 2-dia. holes Terminal Arrangement/Internal Connections (Bottom View) LY1 LY1-D LY1N DC Model AC Model LY1N-D2 Note: The DC models have polarity. A-8 General-purpose Relay LY
9 LY2 LY2-D LY2N LY2N-D2 LY2Z LY2Z-D LY2ZN LY2ZN-D2 Terminal Arrangement/Internal Connections (Bottom View) LY2(Z) LY2(Z)-D Electromechanical Relays Eight, -dia. holes DC Model LY2(Z)N AC Model LY2(Z)N-D2 Note: The DC models have polarity. LYZ LYN LY-D Eleven, -dia. holes 1. Terminal Arrangement/Internal Connections (Bottom View) LY LY-D LYN DC Model AC Model Note: The DC models have polarity. General-purpose Relay LY A-9
10 LY4 LY4-D LY4N LY4N-D2 Terminal Arrangement/Internal Connections (Bottom View) LY4 LY4-D 28 6 Fourteen, -dia. holes 41. DC Model LY4N AC Model LY4N-D2 Note: The DC models have polarity. LY2-CR LY2Z-CR LY2N-CR LY2ZN-CR Terminal Arrangement/Internal Connections (Bottom View) LY2(Z)-CR LY2(Z)N-CR Eight, -dia. holes Model: LY2N-CR CR Element C: 0.0 µf R: 120 Ω Relays with PCB Terminals LY1-0 LY-0 LY2-0 LY4-0 PC Board Holes (Bottom View) (see note 2) Note: 1. The above model is the LY This figure is for the LY Five, Eight, Eleven, 2.-dia. 2.-dia. 2.-dia. holes holes holes 7.1 Fourteen, 2.-dia. holes Note: 1. The tolerance for the above figures is 0.1 mm. 2. Besides the terminals, some part of the LY1-0 carries current. Due attention should be paid when mounting the LY1-0 to a double-sided PC board. A-40 General-purpose Relay LY
11 Upper-mounting Relays LY1F LY2F Mounting Holes Electromechanical Relays ±0.1. Eight, 2-dia. holes (see note). Two,.-dia. holes (or Two M holes) Note: 1. Eight -dia. holes should apply to the LY2F model. LYF ±0.1 6 Eleven, -dia. holes Two,.-dia. holes (or two, M holes) LY4F Mounting holes Two,. dia. holes (or. two, M holes) ±0.1. Fourteen, -dia. holes 28 28±0.1 General-purpose Relay LY A-41
12 Mounting Height with Socket The following Socket heights should be maintained. Front-connecting Back-connecting 71 (see note) LY 67 (84) 40 (7) LY Note: 1. The (-E) can be track-mounted or screw-mounted. 2. For the (CR circuit built-in type) model, this figure should be 88. (-E) Sockets PTF08A-E PTF11A PTF14A-E PT08 PT11 PT14 PT08QN PT11QN PT14QN PT08-0 PT11-0 PT14-0 Mounting Plates for Back-connecting PYP-1 Two,.4-dia. holes PTP-1- PTP-1 PYP ± ± Four,.4-dia. holes 9 R ± x 27.4 = 46.8± elliptical holes R t=1.6 R Four,.4-dia. holes 2±0.1 t= ± PTP x 49.4 = 444.6±0.6 t= elliptical holes PTP x 9.4 = 4.4± x 27.4 = 46.8± x 27.4 = 46.8± elliptical holes 21.6 t= R1.7 42± ± x 49.4 = 444.6±0.6 9 x 49.4 = 444.6± t= R x 9.4 = 4.4± x 9.4 = 4.4± Twelve, square holes t=1.6 A-42 General-purpose Relay LY
13 Hold-down Clips Hold-down clips are used to hold Relays to Sockets and prevent them from coming loose due to vibration or shock. Electromechanical Relays Used with Socket Used with Socket mounting plate For CR circuit built-in Relay PYC-A1 PYC-P PYC-S Y92H- PYC-1 Precautions Refer to page A-72 for general precautions. Connections Do not reverse polarity when connecting DC-operated Relays with built-in diodes or indicators. General-purpose Relay LY A-4
14 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. J002-E1-10 In the interest of product improvement, specifications are subject to change without notice. A-44 General-purpose Relay LY
Type Contact form Plug-in/solder Plug-in/solder PCB terminals Upper-mounting terminals terminals with plug-in/solder
A Miniature Power Relay Equipped with arc barrier. Dielectric strength: 2,000 V. Built-in diode models added to the LY Series. Single-pole and double-pole models are applicable to operating coils with
General-purpose Relay
General-purpose Relay A Miniature Power Relay Equipped with arc barrier. Withstand : 2,000 V. RC+Y LR Ordering Information Open Relays Type Contact form Plug-in/solder terminals Plug-in/solder terminals
Mounting Type Contact form Quick-connect Screw terminals PCB terminals. E-bracket SPST-NO G7L-1A-T G7L-1A-B
A High-capacity, High-dielectricstrength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated coil that handles
PCB Relay G8P. Ordering Information. Small, Low-Cost 30-A Power Relay for PCB Applications. Accessories (Order Separately)
PCB Relay Small, Low-Cost 0-A Power Relay for PCB Applications Small, yet capable of switching up to a 0-A loads. Inexpensive. Ideal for home and industrial appliances, HVAC (heating, ventilating, and
Power Relay RCE. Ordering Information. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops
Power Relay A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated
10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC
Solid State Relays G3NE Compact, Low-cost, SSR Switching 5to20 A Wide load voltage range: 75 to 264 VAC. Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external
Model Number Structure
Solid State Relays Refer to Safety Precautions for All Solid State Relays. Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via
General Purpose High Power PCB Relays
T9 Series Two-pole 3A PCB or Panel Mount Relay n A, form A (NO) and form C (CO) switching capability n Designed to control compressor loads to 3.5 tons, LRA / 5.3FLA n Meets requirements of UL 58 and UL
DJET. Pushbuttons. toggle switch 6,35 mm dia. recommended accessories: - mounting dimension. technical drawing. circuit drawing
Pushbuttons toggle switch 6,35 mm dia. toggle switch 6,35 mm dia. no. of poles material of contacts Switching position connection method colour part no. 2 silver 2 (maintained chromiumplated 02.17312.21
Supplementary protector S 200 MR for ring-tongue applications acc. to UL 1077
Electrical installations in buildings for ring-tongue applications acc. to UL 1077 S 200 MR is a high-performance supplementary protector with ring cable lug connections conforming to UL, CSA, and IEC
Model Number Structure
The reliable choice for Hockey-puck-style Solid State Relays. Available in a wide Range of Currents and Voltage. (5 to 90A, max 660 VAC) All models feature the same compact dimensions to provide a uniform
Emergency Stop Switch A22E. Ordering Information. Install in 22-dia. or 25-dia. Panel Cutout. Construction
Emergency Stop Switch Install in 22-dia. or 25-dia. Panel Cutout Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1,. Safety Lock Mechanism prevents misuse.
Ambient Temperature - 20 C to 80 C. 78mm W x 100mmL x 30mm H. Operating Voltage
SSR Power Controller SSR 1 SSR 2 SSR 3 Phase Single 2 Leg Switching 3 Phase DIN Rail/Panel Mounting Both Both Both Cooling Fan Optional Optional Optional Control MethodZero Cross Trigger / high isolation
Limit Switches. 6.2 E47 Precision Switches
Limit Switches E47BMS02 E47BMS11 E47BMS40.2 Product Description............................................. 2 Approvals..................................................... 2 Features and Benefits...........................................
System pro M compact Miniature Circuit Breaker S 200 U and S 200 UP
Data Sheet System pro M compact Miniature Circuit Breaker S 200 U and S 200 UP 2CDC021316F0004 2CDC021320F0004 The S 200 U and S 200 UP ranges are miniature circuit breakers conforming to UL, CS and IEC
General-Use Auto-Tuning HPX-T Series
General-Use Auto-Tuning HPX-T Series Built-in Hyper-tuning automatically adjusts scanning characteristics. Adjustment steps, results and scanning conditions are digitally displayed by LED. Digital display
630 to 1800 A. Functions. Conformity to standards. General characteristics. Fuse combination switches SIDERMAT combination.
SIDERMAT combination 630 to 1800 A sdmat_048_a_1_cat SIDERMAT combination are manually operated tri- or tetrapolar fuse disconnecting switches which can be triggered remotely. They provide breaking and
Distinctive Characteristics
Distinctive Characteristics Base of heat resistant resin meets ULV-0 flammability rating. Maximized voltage capability of V allows use in medium source applications and increases operating life. Award-winning
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 480W Single Output Industrial DIN RAIL with FC Function SECIFICATION MODEL
6.1. Power Supplies. Contents. PSG Series. General-Purpose and Sensor Power Supplies. Features, Benefits and Functions. Product Description
.1 PSG Series Contents Description PSG Series Catalog Number Selection................ Technical Data and Specifications.......... Power Derating Curves.................. Dimensions...........................
DIN Track Mounting, Standard 17.5 mm Width, Solid-state Star-delta Timer with Smart Dial/Selector-locking Mechanism Appearance and dimensions
Analogue Timer Model H3DS-M/-S/-A H3DS-F H3DS-G Features DIN Track Mounting, Standard mm Width, Solid-state Multifunctional Timer with Smart Dial/Selector-locking Mechanism DIN Track Mounting, Standard
Universal control- and safety isolatingresp. USTE. General Data. Advantages. Applications. Standards 2 " Certifications W
isolating General Data Rated input voltage 208 - Rated output voltage 24-230 Vac Rated power 100-3200 VA Insulation class B Maximum ambient temperature 40 C Efficiency up to 96 % Degree of protection IP
Engineering Design Assurance Test Report ( S )
TEST EQUIPMENT LIST: AC Source : Chroma programmable AC source Model 61504 Power Analyzer : Chroma Power Analyzer Model 6630 Load : Chroma Electronic DC Load 63103 Oscilloscope : Lecroy wave surfer 424
MX Series MX40-7XXX Series MX40-6XXX Series. Selection Guide. Applications. DuraDrive Series Actuator (Includes Accessories)
MX40-6043 Series MX40-7XXX Series MX40-6XXX Series Selection Guide Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional control from a DDC system
SIDERMAT combination Visible breaking and tripping fuse switches from 630 to 1800 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution sdmat_048_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
Engineering Design Assurance Test Report ( S ) MODEL: SPS-070P V 12 Amax 60 Wmax
TEST EQUIPMENT LIST: AC Source : Chroma programmable AC source Model 61504 Power Analyzer : Chroma Power Analyzer Model 6630 Load : Chroma Electronic DC Load 63103 Oscilloscope : Lecroy wave surfer 424
Engineering Design Assurance Test Report ( S )
TEST EQUIPMENT LIST: AC Source : Chroma programmable AC source Model 61504 Power Analyzer : Chroma Power Analyzer Model 6630 Load : Chroma Electronic DC Load 63103 Oscilloscope : Lecroy wave surfer 424
Definite Purpose Contactors 1, 2 and 3 pole Type GDP
Definite Purpose Contactors 1, 2 and 3 pole Type l Definite Purpose Contactors l Switching up to 100A resistive, 90A inductive l Line Voltage up to 600VAC on most sizes l Control voltage up to 480VAC l
Engineering Design Assurance Test Report ( S ) MODEL: SPS-350P V 14.7 Amax 353 Wmax TEST EQUIPMENT LIST:
TEST EQUIPMENT LIST: INPUT FUNCTION TEST AC Source : Chroma programmable AC source Model 61504 Power Analyzer : Chroma Power Analyzer Model 6630 Load : Chroma Electronic DC Load 63103 Oscilloscope : Lecroy
Engineering Design Assurance Test Report ( S ) MODEL: SPS--230P V 9.6 Amax 230 Wmax TEST EQUIPMENT LIST:
TEST EQUIPMENT LIST: INPUT FUNCTION TEST AC Source : Chroma programmable AC source Model 61504 Power Analyzer : Chroma Power Analyzer Model 6630 Load : Chroma Electronic DC Load 63103 Oscilloscope : Lecroy
Pushbutton Switch A22. Ordering Information. Install in 22-dia. or 25-dia. Panel Cutout. Construction
Pushbutton Switch Install in 22-dia. or 25-dia. Panel Cutout Easy mounting and removal of Switch Unit. Increase wiring efficiency with three-row mounting of Switch Unit. Finger protection mechanism on
Test Report: HEP
Test Report: HEP-600-24 600W Single Output Switching Power Supply DESIGN VERIFY TEST Output Function Test Input Function Test Protection Function Test Control Function Test Component Stress Test SAFETY
MODEL:RT-65B OUTPUT FUNCTION TEST NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT I/P: 230 VAC O/P:FULL LOAD
65W Triple Output Switching ower Supply MODEL:RT-65B OUTUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 80 mvp-p (Max ) V2: 120 mvp-p (Max ) V3: 80 mvp-p (Max
120W Single Output Industrial DIN RAIL Power Supply MODEL:DRH OUTPUT FUNCTION TEST NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT
120W Single Output Industrial DIN RAIL ower Supply MODEL:DRH-120-24 OUTUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 80 mvp-p (Max ) I/: 400 VAC O/:FULL LOAD
References. For front operation. Rating (A) For side operation. Rating (A) References. For front operation. Rating (A) For side operation.
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION Fuse combination switches picto_080_c_1_gb Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle acces_156_a_2_cat Direct
Test Report. 240W Single Output Switching Power Supply DESIGN VERIFY TEST
Test Report 240W Single Switching ower Supply DESIGN VERIFY TEST Function Test Input Function Test rotection Function Test Other Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C. Test
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 60W Single Output Industrial DIN Rail ower Supply DR-60 s e ries SECIFICATION
15W Single Output Switching Power Supply MODEL:RS OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT
15W Single Output Switching ower Supply MODEL:RS-15-15 OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1:120 mvp-p (Max ) I/: 230VAC O/:FULL LOAD V1: 52 mvp-p
Test Report: HB
Test Report: HB-100-48 100W Single Switching ower Supply DESIGN VERIFY TEST Function Test Input Function Test rotection Function Test Other Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.
Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series
Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.
Jameco SKU Number:
Jameco SKU Number: 2105560 SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED OWER LINE REGULATION LOAD REGULATION HOLD U
20W Single Output Industrial DIN Rail Power Supply MODEL:MDR OUTPUT FUNCTION TEST NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT
20W Single Outut Industrial DIN Rail Power Suly MODEL:MDR-20-12 OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 120 mv- (Max ) I/P: 230VAC V1: 19 mv- (Max ) 2 OUTPUT VOLTAGE CH1: 10.8 V~ 13.2 V 10.21 V~ 13.85
Test Report: EDR-75-12
Test Report: EDR-75-12 75W Single Output Industrial DIN RAIL DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Feature. Model comment JG 3NA B L - B - D3
Feature Device type universal nut terminals with safety protective cover -A Power Output Rated load voltage 20VAC/VAC Triac power switch Have DC-AC (DC signal to control the AC load) AC-AC (AC signal to
Total solder points: 129 Difficulty level: beginner advanced LIQUID LEVEL CONTROLLER K2639 ILLUSTRATED ASSEMBLY MANUAL
Total solder points: 129 Difficulty level: beginner 1 2 3 4 5 advanced LIQUID LEVEL CONTROLLER K2639 Forgotten to turn off the tap, leaking washing machines,... Prevention is better than cure. So use this
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 120W Single Output Industrial DIN RAIL ower Supply DRH-120 s e ries SECIFICATION
600W with PFC and Parallel Function PSP-600 series
600W with FC and arallel Function S-600 series MODEL:S-600-24 OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 240 mvp-p (Max ) I/: 230VAC O/:FULL LOAD V1:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. geprufre Sicherheit 60W AC-DC Single Output Desktop G S60 s e ries SECIFICATION
1000W Intelligent Single Output Battery Charger MODEL:PB OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT.
B-1000 series MODEL:B-1000-24 OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 BOOST CHARGE VOLTAGE 28.8V + 0.6V I/: 230 VAC I/: 115 VAC O/: BAT 28.83 V/ 230 VAC 28.83 V/ 115
DEUTSCH H91 Series Filter Connectors MIL-DTL SERIES I
MIL-DTL-38999 Series I connectors are subminiature, environmental-class connectors with high and mediumdensity insert arrangements. They are used where a quickdisconnect coupling system is required for
60W Single Output Switching Power Supply
60W Single Output Switching ower Supply LC-60 series SECIFICATION MODEL LC-60-1050 LC-60-1400 LC-60-1750 OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED OWER LINE REGULATION
Fiber attachment (E39-F9) 1.4 dia. 1 dia. (2) E32-TC200B dia. 1.2 dia max. Optical fiber, 2.2 dia Fiber attachment (E39-F9) 0.5 dia.
s Through-beam (Sold in Pairs) E2-TL (T = 2.) M2.6 x (for M) 1. dia. 0.5 (nickelplated brass) M x Optical fiber, 2.2 dia. 0. E2-T12L 1. dia. 2. dia. (nickel-plated brass) dia. Optical fiber, 2.2 dia..2
CH2 12V CH3-5V. 72W with 18CFM min. Forced air convection
Jameco SKU Number: 2457 65W Triple Output Medical Type M T-65 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY EMC (Note 4) OTHERS NOTE OUTUT NUMBER DC VOLTAGE RATED CURRENT CURRENT
Electronic Temperature Controls
ETR-9090 series ETR-9200 series Figure 324 Figure 325 80-260 vac /60Hz PID auto tune/ or 1 set point 3 3 / 8 " depth 1 optional alarm Model Sensor type Output action Alarm ETR9090-121 any thermocouple
Operational Unit. Number of Positions: 2 Positions/3 Positions. Applicable Colors. Non-illuminated: Black Illuminated: Red, green, yellow, blue
Complete Assemblies Knob-type Selector Switch Install in 22-mm dia. or 25-mm dia. Panel Cutout H Illuminated and Non-illuminated models H Locking lever ensures easy mounting and removal of switch unit
YEARS IP hrs. Outdoor Converter. The perfect partner to team up with any 12V LED solution. Full power range from 15W to 200W
CV5 Slim 12V Outdoor Converter 5 YEARS IP67 50.000 hrs The perfect partner to team up with any 12V LED solution Full power range from 15W to 200W SLIM profile (40x23mm) to fit in very thin applications
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
20W Single Output Switching Power Supply MODEL:LPV OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT O/P:FULL LOAD
20W Single Output Switching ower Supply LV-20 series MODEL:LV-20-24 OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 150 mvp-p (Max ) I/: 230VAC O/:FULL LOAD
50W Single Output Switching Power Supply
Jameco SKU Number: 540 50W Single Output Switching ower Supply LS-50 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT
AISI 316L PERFORMANCE RANGE INSTALLATION AND USE
CP-ST Stainless steel centrifugal pumps CP-ST4 Pump body: stainless steel AISI 304 Impeller: stainless steel AISI 304 Shaft: stainless steel AISI 431 CP-ST6 Pump body: stainless steel AISI 316L Impeller:
Test Report: APC
Test Report: AC-25-500 25W Single Output Switching ower Supply DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test
60W Single Output LED Power Supply MODEL:PLP OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT
60W Single Output LED ower Supply L-60 series MODEL:L-60-48 OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 4.8 Vp-p (Max ) I/: 230VAC V1: 3.58 Vp-p (Max
320W Single Output with PFC Function
Jameco SKU Number: 2102730 320W Single Output with FC Function S-320 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE
NH MULTIBLOC fuse-switchdisconnector. terminal version reference no.
NH fuse-switch-disconnector NH fuse-switchdisconnector ~ 690V screw fixing of disconnectors onto plates size rated current in A no. of poles terminal version art. group 00 160 1 screw M8 both sides F229292
Test Report: IRM-20-24
Test Report: IRM-20-24 20W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
240W Single Output with PFC Function
Jameco SKU Number: 2101518 240W Single Output with FC Function S-240 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT
For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1,500 N (7 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure withstands
Test Report: EPP
Test Report: E 150 24 150W Single Output with FC Function DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Test Report: IRM-05-05
Test Report: IRM-05-05 5W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Test Report: EPP
Test Report: E 100 24 100W Single Output with FC Function DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Test Report: IRM-05-24
Test Report: IRM-05-24 5W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
62.5W Rated output power for convection; 80W with 18CFM min. forced air
Jameco SKU Number: 668828 RT-65 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT OTHERS NOTE OUTUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE EAK LOAD RATED OWER OUTUT OWER (max.) VOLTAGE
LPS 20V 24V. COLD START 40A(t width=1030 s measured at 50% I peak) <0.75mA / 240VAC
100W Single Output Switching ower Supply SECIFICATION MODEL CLG-100-12 CLG-100-15 CLG-100-20 CLG-100-24 CLG-100-27 CLG-100-36 CLG-100-48 DC VOLTAGE 12V 15V 20V 24V 27V 36V 48V CONSTANT CURRENT REGION Note.7
Test Report: GSM40A18
Test Report: GSM40A18 40W AC DC Single Output Medical Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Test Report: IRM-10-12
Test Report: IRM-10-12 10W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Parts Catalog. Slicing Machine G10. Model:
, 07 995079 ECN 96 Parts Catalog Slicing Machine G0 Model: G0 /8/7N Rev. E, Serial Number 4048 and Up IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER
XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL
TEF 9964 XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL IMPORTANT Read this instruction carefully before installing the product 996A106032 TUM 1024 REV. E 06.02.14 Tranberg AS P.O. Box 8033 N-4068 Stavanger
Electrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
Electric Smoke Damper Actuators
Bulletin Issue Date May 20, 2004 Electric Smoke Damper Actuators The Modulating Electric Smoke Damper Actuators are oil immersed, spring return, linkage coupled actuator for modulating damper control designed
Test Report: EPS 15 12
Test Report: ES 15 12 15W Single Output Switching ower Supply DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Electrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
HEATER POWER CONTROLLER
HEATER POWER CONTROLLER /04 Rev 0 - - ii PROCON MODEL HPC TABLE OF CONTENTS DESCRIPTION... MANUAL REVISIONS... 5 WARRANTY... 5 SPECIFICATIONS... 6 DRAWINGS PHYSICAL DIMENSIONS 44-090095-0-00... 7 PANEL
Power Supplies 3. SVL Essential DIN Rail Series. Phone: Fax: Web: -
SVL Essential DIN Rail Series SVL Series power supplies are perfect for high volume, controlled environment applications where essential features are the only requirement. When space inside an enclosure
Induction Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-19. Induction Motors
Standard AC Standard AC Constant Speed Constant Speed Torque Brake V Series TM Series Torque Page Features and s of C-20 General Specifi cations C-28 (6 W 90 W) C-30 IP65 Terminal Box C-48 () C-61 2-Pole,
60W Single Output Switching Power Supply
60W Single Output Switching ower Supply LV-60 series SECIFICATION MODEL LV-60-5 LV-60-12 LV-60-15 LV-60-24 LV-60-36 LV-60-48 OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT
Pilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
Safety Interlock Switches
r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables
Data Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
FLFE..L FLF..L. - Zone 1, 2, 21, 22 - With LED tubes - Easy re-lamping - Designed to last over time. Ex e terminal board housing
FLFE..L FLF..L - Zone 1, 2, 21, 22 - With LED tubes - Easy re-lamping - Designed to last over time Ex e terminal board housing Simplified maintenance 4 Joule shock resistant borosilicate glass White painted
Jameco SKU Number:
Jameco SKU Number: 2106335 Single Output Medical Type RS-60 s e ries SECIFICATION MODEL RS-60-3.3 RS-60-5 RS-60-12 RS-60-15 RS-60-24 RS-60-48 OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS
Relay Couplers. Product Selection Guide
Relay Couplers Product Selection Guide Relay Couplers in Weidmuller's World Switching, amplifying and multiplying. Weidmuller s relay couplers give their all! RSS Slim measuring and monitoring relays:
Tip-Over Switches - Non Mercury Contacts
Tip-Over Switches - Non Mercury Contacts SWITCH OPERATION CW172-1 CW1740-1 CW12-0 Tip-over switches are designed to switch on/off when tilted from the vertical position. CW12-0 CW12-1 0.2 ± 10 Ω at Vdc
Product Specification
HDBNC-BH1 Jack, Right Angle Orientation, PCB Terminated HDBNC-CA Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Through-hole, edge
PGFS Series 30 Amp Permanent Series (Splice-In) GFCI/ELCI
PGFS Series 30 Amp Permanent Series (Splice-In) GFCI/ELCI INTRODUCTION The LineGard 30 Amp Permanent Series is an industrial grade ground fault interrupter device designed and manufactured by North Shore
35W Single Output Switching Power Supply
35W Single Output Switching ower Supply LV-35 series SECIFICATION MODEL LV-35-5 LV-35-12 LV-35-15 LV-35-24 LV-35-36 OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT
Data Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
1000W Single Output Power Supply
Jameco SKU Number: 2101569 SE-1000 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED OWER VOLTAGE ADJ. RANGE LINE
1000W Single Output Power Supply
Jameco SKU Number: 2101542 1000W Single Output ower Supply SE-1000 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE
TECHNICAL INFORMATION
TECHNICAL INFORMATION ISO 900 Certification was achieved in December 997, and reflects the strict adherence to quality management techniques from the first day of production. This certification was given