Wyandotte Reviewed: 9/2/14 Effective: 1/1/15 Supersedes: New Preparer: Owner: Approver: EHS Team Leader EHS Team Leader EHS Hub Manager

Size: px
Start display at page:

Download "Wyandotte Reviewed: 9/2/14 Effective: 1/1/15 Supersedes: New Preparer: Owner: Approver: EHS Team Leader EHS Team Leader EHS Hub Manager"

Transcription

1 Procedure No.: WYN Page: 1 of 7 Revision History Revision Date Revision Number 9/2/14 Original Nature of Change Original document developed to incorporate knife use as outlined in BC General Requirements Safety & Health

2 Procedure No.: WYN Page: 2 of 7 1. PURPOSE The intent of the is to establish guidelines for the selection and use of appropriate cutting tools at the Wyandotte site. 2. SCOPE The applies to all employees, contract employees, and contractors at the Wyandotte site. Excluded from this safety policy are: Tools used in the preparation or consumption of food Tools that are generally accepted and purposely designed for use in maintenance activities (ex. use of tin snips for cutting duct work, use of wire strippers for stripping wire, etc.). Tools used by contractors where those tools are general accepted tools of the trade, are familiar to that contractor and cannot be substituted by more inherently safe tools. 3. DEFINITIONS 3.1. Cutting Tool A non-powered hand tool used to cut a material or an object Diagonal Wire Cutter Hand tool used primarily to cut strands of wire, plastic tie wraps or other small diameter items 3.3. Exposed Blade Knife A knife that does not have a retractable blade. An example includes an exacto knife. 3.4 Open Blade Knife Any knife that has a blade that is not protected by a guard, hood, or other permanent covering that would prevent the blade from contacting the user if inadvertent contact were to occur; this includes self-closing/automatic retracting knives.

3 Procedure No.: WYN Page: 3 of Retractable Blade Knife A type of knife that has a retractable blade that can be locked in a fixed position. 3.6 Self-Retracting Blade Knife A knife that has a blade which is spring loaded and self-retracting. The knife requires the user to expose the cutting blade by pushing forward on a lever on the side or top of the knife. The blade will automatically retract inside the knife casing when the blade leaves the cutting surface or the lever is released. 3.7 Shears Scissors type cutting tool used to cut materials such as paper, plastic, metal sheeting and metal/plastic banding straps 3.8 Sheet Material Cutter A tool with a hidden, recessed blade used for cutting plastic shrink wrap or opening boxes. 4. PROCEDURE 4.1. General Instructions Only use the cutting tool for what it is designed for The following actions are prohibited: o Exceeding the recommended capacity of the tool o Using tools that are cracked, broken, or loose o Extending the handle length to achieve greater cutting power o Hammering or applying excessive force or pressure on cutting tools. o Using personal pocketknives to complete any BASF related task Hands shall not be placed in the line of fire and all cutting motions should be away from the body and/or the hand When using a cutting tool with one hand, keep the other hand and other body parts / objects out of the line of fire Concentrate on the task at hand, making straight, even cuts without rocking, prying or twisting the tool.

4 Procedure No.: WYN Page: 4 of Selection of a Cutting Tool When selecting a cutting tool for the task, consider: o the task o type of material which the tool will be cutting o hardness of material which the tool will be cutting o size of the material which the tool will be cutting A tool where the blade is not exposed or is where the blade is self-retracting shall be used for taped boxes, mailer envelopes, and general mail All tie wraps, plastic or wire, will be cut using tie wrap cutters Only utility knives with spring loaded, self-retracting blades shall be used only if there are no other tools for the job Any inherently safer blade design or concept that has been reviewed and approved for use by the Unit embedded or Site Environmental, Health and Safety Personnel will not require a JSA provided it does not meet the definition of an Open Blade Knife and it is safely protected by a guard, hood, or other permanent covering that would prevent the blade from contacting the user if inadvertent contact were to occur Maintenance of a Cutting Tool Cutting tools will be kept in good condition. Cutting tools that need repair or replacement will be taken out of service immediately Blades will be replace/sharpened when dulled Only authorized personnel will perform repairs to cutting tools and sharpening of cutting tool blades (i.e., trained personnel / outside vendor) Exposed Blade Tools An exposed blade tool may be used if the tool with an exposed blade cannot be substituted by a safer tool with a non-exposed blade as determined by BASF Supervision in consultation with the EHS group. Kevlar or similar cut resistance gloves will be required to be worn on the off-hand while using the exposed blade tool pending the risk assessment and JSA that are required

5 Procedure No.: WYN Page: 5 of 7 to be completed. If the glove on the offhand creates a greater hazard then the variance from requiring its use must be reviewed with the EHS group prior to not requiring its use. A. Where chemical resistance is required or a severe reduction in manual dexterity or grip strength compromises the overall safety of a task, other appropriate hand protection may be selected When an exposed blade tool is used, including an Open Blade Knife, all of the following must be completed: A. A risk assessment performed according to Corporate Procedure BC Personal Protective Equipment. B. A standard operating procedure (SOP), work instruction, or job safety analysis (JSA) must be completed before use of the open bladed knife including the PPE required (e.g. cut-resistant gloves, gauntlets, chaps, or aprons as appropriate to the task and include the hazards of the task and methods to minimize the hazards. C. Training must conducted on the JSA, including the selection, proper use, and limitations of the exposed blade tool. Note: Knife restrictions must be communicated to all employees and added to the new employee and contractor site orientations. Standard exemptions: tasks where knives or sharp blades are used for food preparation or consumption and personal grooming Cutting tools with exposed blades will be stored properly. A. These tools will not be carried unsheathed in uniforms or work clothes. B. Cutting tools will be stored with the blade retracted and / or protected in cabinets, toolboxes, tool pouches or sheaths. 4.5 Training on Using a Cutting Tool Each employee will received documented training on the Cutting Tool Safety Policy. Training will be documented and can be incorporated into the each group s safety meeting The safe use of cutting tools will be addressed in the Wyandotte site s safety rules along with this cutting tool standard. As necessary, refresher training on the safe use of cutting tools will be provided Contractors will also be trained on this policy as part of their contractor safety orientation.

6 Procedure No.: WYN Page: 6 of 7 5. RESPONSIBILITY 5.1. Site/Plant Manager The Site/Plant Manager has the primary responsibility for the implementation of the Cutting Tool Safety Policy EHS Site Services EHS Site Services has the responsibility for issuing, maintaining and interpreting the Cutting Tool Safety Policy. In addition the Wyandotte site EHS group will work with groups within the Wyandotte site to develop a list of approved cutting tools along with the tasks the tool is intended to be used for along with the required PPE Supervisors Department managers, Supervisors and Operations Leaders have the responsibility for enforcing the Cutting Tool Safety Policy Project Engineers/Maintenance/Construction Managers Project engineers, Maintenance and site contractor contact personnel have the responsibility to verify and ensure that all contractors comply with the Cutting Tool Safety Policy Employee/Contract Employee Each employee and contract employee is responsible and will be held accountable for following the Cutting Tool Safety Policy. 5.6 Contractors Contractors working on the Wyandotte site are responsible for understanding the Wyandotte, including identifying tasks that may be exempt from this policy as well as to identify approved type cutting tools.

7 Procedure No.: WYN Page: 7 of 7 6 Related documents Description of Procedure Corporate No. Wyandotte No. Wyandotte Site Safety Rules WYN Personal Protective Equipment BC WYN Safe Work Permit Procedure BC WYN General Requirements Safety & Health BC

The following are safety precautions to keep in mind when using safety knifes:

The following are safety precautions to keep in mind when using safety knifes: Reason Why Outline Nearly 40 percent of all injuries attributed to manual workshop tools in the UK involve knifes with or without retractable blades. We have had a series of accidents where employees have

More information

Knives, Cutters & Scrapers

Knives, Cutters & Scrapers Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel

More information

Safer Cutting For The Flexible Packaging Industry. Presented By: Tommy Landwehr Martor USA

Safer Cutting For The Flexible Packaging Industry. Presented By: Tommy Landwehr Martor USA Safer Cutting For The Flexible Packaging Industry Presented By: Tommy Landwehr Martor USA Martor s Experience Within The Flexible Packaging Industry We have a long history with many of the members of

More information

Back Safety What leads to back injuries? What are the most common types of back injuries? How can back injuries be prevented?

Back Safety What leads to back injuries? What are the most common types of back injuries? How can back injuries be prevented? Back Safety What leads to back injuries? Lifting excessive weight. Using poor lifting technique such as bending over at the waist or twisting with loads. Reaching overhead for elevated loads. Carrying

More information

Safety Cutter I Pacific Handy Cutter

Safety Cutter I Pacific Handy Cutter SAFETY CUTTER Safety Cutter I Pacific Handy Cutter Pacific Handy Cutter is known as the leader and innovator in Safety Cutting Tools, but we got our start when we invented the original flat box cutter

More information

FOOD PROCESSING AND PHARMACEUTICAL MODULE

FOOD PROCESSING AND PHARMACEUTICAL MODULE FOOD PROCESSING AND PHARMACEUTICAL MODULE Hand Safety Hands are one of the most important parts of the human body enabling us to use equipment, sense pressure or temperature, communicate with one another

More information

Replacement Blades. Replacement Blades , , /4 ABS Plastic/Stainless Steel. Replacement Blades

Replacement Blades. Replacement Blades , , /4 ABS Plastic/Stainless Steel. Replacement Blades NEW s Olfa Compact Self-Retracting Safety Knife Spring-loaded blade self-retracts the instant it loses contact with the material being cut Fits any size hand and easily slips into a pocket for convenience

More information

TROOP 22 TOTIN' CHIP REQUIREMENTS

TROOP 22 TOTIN' CHIP REQUIREMENTS TROOP 22 TOTIN' CHIP REQUIREMENTS References: Boy Scout Handbook, 11th Ed. pp. 77-85 and 218-219; Boy Scout Handbook, 10th Ed. pp. 63-76 (superior to 11th Ed. but still deficient); Boy Scout Handbook,

More information

Detectable Safety Knives. How to: Choose, Use & Protect Personal & Product Safety Information

Detectable Safety Knives. How to: Choose, Use & Protect Personal & Product Safety Information etectamet OFFICE & PROFESSIONAL CLEANING PRODUCTS Detectable Safety Knives How to: Choose, Use & Protect Personal & Product Safety Information Detectamet Ltd Unit 55, Halifax Way, Pocklington Industrial

More information

Knife. Tips on Safety, Use, Maintenance, Sharpening, Conservation, and Outdoor Ethics

Knife. Tips on Safety, Use, Maintenance, Sharpening, Conservation, and Outdoor Ethics My FIRST Knife Tips on Safety, Use, Maintenance, Sharpening, Conservation, and Outdoor Ethics A joint educational project of the American Knife & Tool Institute and the Mule Deer Foundation Based on contributions

More information

Knife Permit: Outdoor Knife Skills

Knife Permit: Outdoor Knife Skills Page 1 of 2 Knife Permit: Outdoor Knife Skills Objective: The information contained in this document is designed to highlight examples of how knives can be used for outdoor survival skills. These activities

More information

Cutco Knife Storage Sheaths

Cutco Knife Storage Sheaths Cutco Knife Storage Sheaths Available Sheaths #1721-2 Storage Sheath for Trimmer #2120-2 Storage Sheath for 4" Paring Knife #1764-2 Storage Sheath for Traditional Cheese Knife #1766-2 Storage Sheath for

More information

Utility Knives & Blades

Utility Knives & Blades www.irwin.com Utility Knives & Blades Utility Blades IRWIN 4-Point Snap Blades The new IRWIN 4-Point snap blade combines the toughness of a traditional blade with the functionality of a snap blade. When

More information

/ Tool and Equipment Safety Tether System (T.E.S.T.S)

/ Tool and Equipment Safety Tether System (T.E.S.T.S) 20 INSTRUCTIONS FOR USE AND PRODUCT GUIDE 799953 / 799955 Tool and Equipment Safety Tether System (T.E.S.T.S) Part # T353012 Rev 2 Reliance Industries LLC 2802 East X Street Deer Park, Texas 77536 281-930-800

More information

2008 Equalizer Industries, Inc. Revision 4/23/

2008 Equalizer Industries, Inc. Revision 4/23/ 2008 Equalizer Industries, Inc. Revision 4/23/2018 www.equalizer.com All Equalizer tools are warranted for one year to be free of factory defects. Warranty does not apply to abuse, misuse, or normal wear

More information

2pcs/pack. Auto Loading Utility Knife. Electrician's Knife Carton Cutter Utility Folding Knife Utility Cutter

2pcs/pack. Auto Loading Utility Knife. Electrician's Knife Carton Cutter Utility Folding Knife Utility Cutter 38 3 902-253 Utility Folding Knife 902-253 902-318 Utility Cutter 2 1 locks with 3 positions : 902-261(100pcs/pack) 902-317 Carton Cutter Carton cutter Scraper 2pcs/pack All metal made cutter and cover

More information

Keeping your Workplace Safe for Foodservice Employees

Keeping your Workplace Safe for Foodservice Employees Keeping your Workplace Safe for Foodservice Employees Cindy Rice, RS Eastern Food Safety 12.4.18 Objectives Identify common injuries Understand chemical risks, safety measures Identify clean up methods

More information

lyondellbasell.com lyondellbasell.com Hand Safety

lyondellbasell.com lyondellbasell.com Hand Safety Hand Safety Hand Safety The integrity of our hands is absolutely essential to our everyday functional living and they serve as the primary mechanism by which we complete most physical work. Historically,

More information

GEORGIA DEPARTMENT OF CORRECTIONS Standard Operating Procedures IVL ** Authority: Effective Date: Page 1 of Donald / Adams 9/01/04 9

GEORGIA DEPARTMENT OF CORRECTIONS Standard Operating Procedures IVL ** Authority: Effective Date: Page 1 of Donald / Adams 9/01/04 9 GEORGIA DEPARTMENT OF CORRECTIONS Standard Operating Procedures Subject: Risk Management Revises Previous Authority: Page 1 of Donald / Adams /01/04 I. POLICY: A. To provide Food Service employees in each

More information

WHITTLING CHIP CLASS I. Session 1

WHITTLING CHIP CLASS I. Session 1 WHITTLING CHIP CLASS I. Session 1 A. Overview 1. Review today s session. 2. Review the next two sessions. B. Whittling Chip card 1. Show Whittling Chip card and pass it around. 2. Explain what the card

More information

TRANSFER OIL. thermoplastic and ptfe hoses fittings and assemblies

TRANSFER OIL. thermoplastic and ptfe hoses fittings and assemblies Scope Thermoplastic Sewer Cleaning Hose Factors of Hose Service Life Transfer Oil sewer cleaning hoses are purpose designed for aggressive sewer cleaning applications. The hose is designed and constructed

More information

Laboratory Safety. A practical approach.

Laboratory Safety. A practical approach. Laboratory Safety A practical approach. 1 SDS Management All SDS Material is filed in a central location An additional copy is placed in the room where the item is stored Central location files are permanent

More information

Crimp & Cleave Termination Instructions

Crimp & Cleave Termination Instructions Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp

More information

award-winning cutting tools why Slice ceramics? 2016 Slice Inc. reproduction prohibited without written approval

award-winning cutting tools why Slice ceramics? 2016 Slice Inc. reproduction prohibited without written approval award-winning cutting tools why Slice ceramics? eliminating dangerous metal blades more than half the Fortune 1000 use Slice ceramics endless applications used in 100 s of industries automotive military

More information

SAFETY KNIVES A FULL RANGE OF CUTTING SOLUTIONS

SAFETY KNIVES A FULL RANGE OF CUTTING SOLUTIONS SAFETY KNIVES A FULL RANGE OF CUTTING SOLUTIONS StanleySafetyKnives.com WORK SAFE HELP KEEP YOUR WORKFORCE SAFE WITH STANLEY When working continuously with cutting tools in a fast-paced environment, accidents

More information

SAFETY AND FIRE PREVENTION

SAFETY AND FIRE PREVENTION CHAPTER 8 SAFETY AND FIRE PREVENTION GENERAL Accidents can occur in many ways in a workplace unless personnel are properly trained in fire and accident prevention and practice safety at all times. Teach

More information

Installation manual. Drop-arm awning. V120 Napoli

Installation manual. Drop-arm awning. V120 Napoli Installation manual Drop-arm awning V120 Napoli Installation manual drop-arm awning V120 Napoli Content 1. Drop-arm awning * 2. Control a. Manual control: crank handle b. Manual control: strap coiler

More information

USER INSTRUCTIONS. Applicable to Lanyard : REF. NO. : ,

USER INSTRUCTIONS. Applicable to Lanyard : REF. NO. : , USER INSTRUCTIONS Applicable to Lanyard : REF. NO. : 10185600, 10185613 Manufacturer : MSA Europe GmbH, Schlüsselstr. 12, CH- 8645 Rapperswil-Jona Switzerland Body : SATRA Technology Centre, Wyndham Way,

More information

Tool Risk Assessment/ Introduction/ Use/ Maintenance

Tool Risk Assessment/ Introduction/ Use/ Maintenance Location of use: Name of suitably qualified leaders able to teach tools: Date written: Reviewed: Next Review: OUTDOOR LEARNING ACTIVITY SPECIFIC : KNIFE Any leader using tools in their session should be

More information

Insulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Insulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage

More information

Using Wiping Cloth Buckets USDA Professional Standards Code 2620 / 2630 Lesson Objectives Recognize that health regulations and accepted best practices require the use an accurately mixed sanitizing solution

More information

ADDENDUM NO. 1. BID Number F. Emergency Preparedness Supplies. The following changes shall be incorporated into the bidding documents.

ADDENDUM NO. 1. BID Number F. Emergency Preparedness Supplies. The following changes shall be incorporated into the bidding documents. ADDENDUM NO. 1 BID Number 17-18-16F Date: May 9, 2018 The following changes shall be incorporated into the bidding documents. Acknowledge receipt of this addendum on the space provided on the Proposal

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION PRODUCT SPECIFICATION Brand Jokari Product Range Cable/Wire strippers Catalogue number 10160, 10270, 10271, 10280, 10282, 10283, 20030, 20050, 20060, 20090, 20100, 20300, 20310, 20450, 30010, 30100, 30120,

More information

DR LEAF & LAWN VACUUM

DR LEAF & LAWN VACUUM DR LEAF & LAWN VACUUM OPTIONAL VAC HOSE & MULCH DISCHARGE ACCESSORIES SAFETY & OPERATING INSTRUCTIONS FOR MODELS WITH SERIAL NUMBER LLV34602 AND GREATER Serial No. Order No. Original Language DR Power

More information

Premier Avionics, LLC.

Premier Avionics, LLC. FAA APPROVED REPAIR STATION NO. 7PMR634B Premier Avionics, LLC. FORT WAYNE INTERNATIONAL AIRPORT 11007 WEST PERIMETER ROAD FORT WAYNE, INDIANA 46809 1-260-747-4810 MANUAL CONTROL NO.: ASSIGNMENT: Section

More information

PART FOUR SAFETY AND SANITATION CHAPTER 11 SAFETY

PART FOUR SAFETY AND SANITATION CHAPTER 11 SAFETY PART FOUR SAFETY AND SANITATION CHAPTER 11 SAFETY PROMOTING SAFETY AWARENESS Safety in field operations (as elsewhere) may be called common sense in action. Class I and food service personnel can prevent

More information

a brand of SAFETY KNIVES

a brand of SAFETY KNIVES a brand of SAFETY KNIVES 2 0 1 6 www.movingedge.com It s a fact that hand knives can be dangerous. This includes their use at work. Warehouses, Retail, or any location where the removal of packaging is

More information

MODEL # 1 MANUAL CAN OPENER

MODEL # 1 MANUAL CAN OPENER REV.B SERVICE MANUAL MODEL # 1 MANUAL CAN OPENER Model #1 Can Opener Assembly Procedure The Model #1 can opener will be assembled according to the following procedure. I. Model #1 Handle and Arbor Assembly

More information

The kitchen can be a dangerous place

The kitchen can be a dangerous place The kitchen can be a dangerous place The kitchen is a fast-paced and sometimes stressful place to be. With the addition of open flame, knives and other hazards, the kitchen can be dangerous. For this reason

More information

Pack 277 Whittling Chip Class November 2013

Pack 277 Whittling Chip Class November 2013 Pack 277 Whittling Chip Class November 2013 Supplies Needed This booklet for each Scout s Parents Ivory soap (1 per scout, plus extras) Table cloth to collect soap chips Popsicle sticks (1 per scout, plus

More information

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly

More information

Blue Series Hot Melt Hose with RediFlext II Hanger System

Blue Series Hot Melt Hose with RediFlext II Hanger System Instruction Sheet P/N 1124594_01 Blue Series Hot Melt Hose with RediFlext II Hanger System Safety WARNING! Allow only personnel with appropriate training and experience to operate or service the equipment.

More information

This data sheet was designed to train

This data sheet was designed to train Cutting and clearing vegetation This data sheet was designed to train employees using tractor mowers, power hand mowers, brush-cutting tools and chemical sprayers. Its objective is to protect employees

More information

functionality with the necessary maintenance tools stored in a convenient built in tool box, as well as parallel handles for

functionality with the necessary maintenance tools stored in a convenient built in tool box, as well as parallel handles for GuilloMax User Manual The Guillomax has distinct features such as its unique structure and ease of cutting. It combines symmetry with functionality with the necessary maintenance tools stored in a convenient

More information

Handling & Maintaining Knives

Handling & Maintaining Knives 1 Handling & Maintaining Knives 2 3 MAINTAIN KNIVES It is the hallmark of a professional craftsman, that his/her personal equipment is kept in good working order. Knives are essential to most culinary

More information

Eaton ET Hydraulic Hose Saw INSTRUCTION MANUAL

Eaton ET Hydraulic Hose Saw INSTRUCTION MANUAL Eaton ET9100-07-110 Hydraulic Saw INSTRUCTION MANUAL INSTRUCTION MANUAL Eaton ET9100-07-110 Hydraulic Saw Table of Contents Introduction... 3 Old Method... 3 New Eaton Method... 3 Operation... 4 Operation

More information

1000M MANUAL Signature Series Slicer OPERATORS MANUAL

1000M MANUAL Signature Series Slicer OPERATORS MANUAL 1000M MANUAL Signature Series Slicer OPERATORS MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration

More information

Knives & Cutting Tools

Knives & Cutting Tools Knives & Cutting Tools Klein provides a wide range of knives, scissors and other cutting tools for professional applications across all trades. Pocket Knives One Blade Lightweight Lockback Knives Blades

More information

ELE-3COP-375 Title - Braid termination using a Band Strap Adaptor.

ELE-3COP-375 Title - Braid termination using a Band Strap Adaptor. Before starting work please read this document carefully and note the guidance given. 1 Purpose and Scope This COP describes the procedure to be used when carrying out the installation of a Band Strap

More information

Personal Protective Equipment (PPE) Toolbox Talk

Personal Protective Equipment (PPE) Toolbox Talk Personal Protective Equipment (PPE) Toolbox Talk Personal Protective Equipment Eye & Face Protection Head Protection Hand Protection Foot Protection Body Protection Respiratory Protection Eye & Face Protection

More information

GLM300 Semi-auto Slicer

GLM300 Semi-auto Slicer Frequency: Before each days use Division: Location: User: Supervisor: Preceda Code: Article Number:

More information

Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA

Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp

More information

Axe Safety Coaching Certification

Axe Safety Coaching Certification Axe Safety Coaching Certification Definitions Section 1 - Throwing Section 2 - Equipment and Field Section 3 - Participants Section 4 - Coaching Section 5 - Trick Shots Section 6 - First Aid Definitions

More information

Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool

Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)

More information

Vancouver Airport Authority. Contractor Safety Management Program [CSMP] Airside Contractor & Construction Safety

Vancouver Airport Authority. Contractor Safety Management Program [CSMP] Airside Contractor & Construction Safety Vancouver Airport Authority Contractor Safety Management Program [CSMP] Airside Contractor & Construction Safety - 2017 CSMP Contractor Expectations - 2017 i Contents Contents Contents Introduction ii

More information

User s Manual Trampoline 8

User s Manual Trampoline 8 User s Manual Trampoline 8 Model! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 17 lbs. ASSEMBLY IMPORTANT

More information

why Slice ceramics? award winning cutting tools rev Slice Inc. reproduction prohibited without written approval

why Slice ceramics? award winning cutting tools rev Slice Inc. reproduction prohibited without written approval why Slice ceramics? award winning cutting tools replacing metal with Slice ceramics companies world-wide are switching to Slice ceramics * General Electric endless applications - corrugated - nuclear and

More information

Tool Sets. Tool Sets. 41-Piece Journeyman Tool Set. Cat. No. Set Contains Weight (lbs.) WARNING: Do NOT use screwdrivers to pry or chisel.

Tool Sets. Tool Sets. 41-Piece Journeyman Tool Set. Cat. No. Set Contains Weight (lbs.) WARNING: Do NOT use screwdrivers to pry or chisel. Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool sets to assist professionals with these demanding projects. 41-Piece Journeyman Tool

More information

Items that are not wrapped or packaged correctly can allow contamination and therefore present a risk of infection to the patient.

Items that are not wrapped or packaged correctly can allow contamination and therefore present a risk of infection to the patient. Ref. : 1 of 5 PURPOSE AND SCOPE To ensure all staff working in the dental practice responsible for reprocessing of medical instruments and equipment are aware of the correct packaging and wrapping that

More information

Folding Pocket Knife. Folding Pocket Knife. Lock-Back Pocket Knife. Multi-Tool knife. Folding Knife

Folding Pocket Knife. Folding Pocket Knife. Lock-Back Pocket Knife. Multi-Tool knife. Folding Knife Folding Pocket Knife SK-60-3 5/8" 440 Stainless steel blade - 4 7/8" Closed - Stainless steel with pakawood handle Folding Pocket Knife SK-63-2 7/8" 440 Stainless steel blade - 3 3/4" Closed - Stainless

More information

Bevel Buddy Instruction Manual

Bevel Buddy Instruction Manual Bevel Buddy Instruction Manual We at Precision Sharpening Devices Inc. believe there are two very important steps in maximizing the savings this equipment can provide your company. First, use this manual

More information

EU GPP CRITERIA FOR INDOOR CLEANING SERVICES 1. INTRODUCTION

EU GPP CRITERIA FOR INDOOR CLEANING SERVICES 1. INTRODUCTION EU GPP CRITERIA FOR INDOOR CLEANING SERVICES (please note that this document is a compilation of the criteria proposed in the 3 rd Technical Report, which should be consulted for a full understanding of

More information

8713S Premium Slicer Operators Manual

8713S Premium Slicer Operators Manual 873S Premium Slicer Operators Manual Persons under the age of 8 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor employment standards administration

More information

Manufacturers Of High Quality Safety Cutters, Razor Blades, And Accessories Since Working Safe Everyday. Store Safety and Supply Catalog SYSTEM

Manufacturers Of High Quality Safety Cutters, Razor Blades, And Accessories Since Working Safe Everyday. Store Safety and Supply Catalog SYSTEM S 4 SYSTEM S 5 S 7 Manufacturers Of High Quality Safety Cutters, Razor Blades, And Accessories Since 1950 Store Safety and Supply Catalog Working Safe Everyday. S8 Ambidextrous Safety Cutter A New Spin

More information

Operator s Manual. Medium-Duty Electric Slicers ENGLISH. Item Model Description Drive Peak HP Voltage Amps Hz Plug

Operator s Manual. Medium-Duty Electric Slicers ENGLISH. Item Model Description Drive Peak HP Voltage Amps Hz Plug Medium-Duty Electric Slicers 40950 40951 Item Model Description Drive Peak HP Voltage Amps Hz Plug 40950 SLM250/S 10 Knife Medium-Duty Slicer 1/3 2.5 Belt 120 60 5-15P 40951 SLM300P/S 12 Knife Medium-Duty

More information

Operation Manual SUPER BEAST Multi-tool SC-11M-10

Operation Manual SUPER BEAST Multi-tool SC-11M-10 Operation Manual SUPER BEAST Multi-tool SC-11M-10 Technical Specifications General Safety/Operating Instructions Attaching/Changing the Head Using the SUPER BEAST as a Cutter Using the SUPER BEAST as a

More information

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER 1 TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM TK No. 30 CLEAT BENDER Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (920)-662-9966 Fax -

More information

Mixer Blade Sets of Parts and Installation Procedure Using Epoxy

Mixer Blade Sets of Parts and Installation Procedure Using Epoxy Mixer Blade Installation Procedure Important Safety Notice STAY CLEAR OF MIXER UNTIL MIXER IS OFF, MAIN PANEL IS LOCKED OUT, AND ALL MIXER COMPONENTS' MOTIONS ARE STOPPED. FOLLOW STANDARD SAFETY PROCEDURES

More information

BERNSTEIN TOOLS FOR ELECTRONIC

BERNSTEIN TOOLS FOR ELECTRONIC BERNSTEIN TOOLS FOR ELECTRONIC Bernstein Tools pliers, safety tool, sets and suitcases Safety Pliers Safety Wrenches Safety Tools Content Tools Sets and suitcases... 4 Safety insulated pliers... 12 Safety

More information

Whittling Chip Class Pow Wow 2010

Whittling Chip Class Pow Wow 2010 Safety First-rules for adults teaching 1. Make sure to have a first aid kit at every lesson. 2. Have water and towels available to wash hands; flush eyes! 3. Treat the wooden knife like a real knife (-if

More information

Crimp & Cleave Termination Instructions

Crimp & Cleave Termination Instructions A Furukawa Company Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm and 400 µm ST and SMA Connectors For Use With: 200 µm and 400 µm ST and SMA Termination Kits 200

More information

Tool Sets. Tool Sets. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Tool Sets. Tool Sets. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P r o f e Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool kits to assist professionals with these demanding projects. s s i o

More information

Crimp & Cleave Termination Instructions for 200 µm F07 Connectors

Crimp & Cleave Termination Instructions for 200 µm F07 Connectors Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm F07 Connectors For Use With: F07 Termination Kits 200 µm HCS Fiber-Optic Cable F07 Crimp & Cleave Connectors Important

More information

Fiberglass Duct Tools 22\

Fiberglass Duct Tools 22\ Fiberglass Duct Tools 22\ Cutting Blade Excess Tie AUTO-CUT-OFF Breakaway spring mechanism automatically engages cut-off blade at desired tension setting. Adjustment Knob Manual A clean black baked on

More information

Crimp & Cleave Termination Instructions

Crimp & Cleave Termination Instructions Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors For Use With: 200 µm ST and SMA Factory5 Termination Kits 200 µm HCS Factory5 Fiber-Optic Cable ST and SMA Factory5

More information

HYDE SHOE KNIFE. Bevel point. 4 3/8" x 7/8" Ref.: PEL DEXTER BLADE HANDLE. Ref.: PEL-34SE

HYDE SHOE KNIFE. Bevel point. 4 3/8 x 7/8 Ref.: PEL DEXTER BLADE HANDLE. Ref.: PEL-34SE RUSSEL MIXING KNIFE HYDE SHOE KNIFE DESTER SHOE KNIFE Ref.: FL-220059 Ref.: GS-0190300 Bevel point. 4 3/8" x 7/8" Ref.: AC-T5009 Spatula Spatula Round point Ref.: PEL-55600 DEXTER MILL BLADE DEXTER BLADE

More information

Troop 55 Totin Chip Training Outline Supplies Needed:

Troop 55 Totin Chip Training Outline Supplies Needed: Troop 55 Totin Chip Training Outline Supplies Needed: Boy Scout Handbook Training Outline Totin Chip Cards Pocketknife (each scout should bring) Toothpicks & Tissue Honing Oil Sharpening Stone/Whetstone

More information

ISO INTERNATIONAL STANDARD. Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives

ISO INTERNATIONAL STANDARD. Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives INTERNATIONAL STANDARD ISO 13998 First edition 2003-01-15 Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives Vêtements de protection Tabliers, pantalons et

More information

PRODUCT MANUAL - M096

PRODUCT MANUAL - M096 PRODUCT MANUAL - M096 MODEL 270 ELECTRIC CAN OPENER 1 I. LABELS L087--CAUTION 2 II. SPECIFICATIONS MODEL NO. 270 POWER 115 VOLT, 1.5 AMP, 50-60HZ REQUIREMENTS 230 VOLT, 0.8 AMP, 50-60 HZ NORMAL SPEED 200-250

More information

09 LBL Turkey Bay Off-Highway Vehicle Area Rules & Regulations

09 LBL Turkey Bay Off-Highway Vehicle Area Rules & Regulations 09 LBL Turkey Bay Off-Highway Vehicle Area Rules & Regulations Revised 3-2009 ABOUT TURKEY BAY OHV AREA Turkey Bay Off-Highway Vehicle (OHV) Area is a designated area for OHV riding and camping. Turkey

More information

(12) Patent Application Publication (10) Pub. No.: US 2008/ A1

(12) Patent Application Publication (10) Pub. No.: US 2008/ A1 US 20080086895A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2008/0086895 A1 Parks (43) Pub. Date: Apr. 17, 2008 (54) UTILITY KNIFE WITH INTEGRATED HOLE PUNCH (76) Inventor:

More information

K SIGNAGE & TRAFFIC CONTROL. Table of Contents

K SIGNAGE & TRAFFIC CONTROL. Table of Contents Table of Contents K1. ACCOMMODATION OF TRAFFIC... 1 K2. MINIMUM CONSTRUCTION SIGNING... 1 K3. SUBDIVISION SIGNS... 2 K4. TRAFFIC CONTROL DEVICES... 2 K4.1 Traffic Signs Regulations... 2 K4.2 Materials...

More information

INSTALL INSTRUCTIONS for VEHICLES

INSTALL INSTRUCTIONS for VEHICLES INSTALL INSTRUCTIONS for VEHICLES Issued: 1 st December 2011 These are the recommended steps for installing One Way Vision (OWV) film onto a vehicle rear windscreen or side glass panels. Location: Applicable

More information

KENNECOTT UTAH COPPER

KENNECOTT UTAH COPPER 12.2.1 INTRODUCTION: 12.2.1.1 The purpose of this standard is to define responsibilities and accountability when non-kuc Rio Tinto Groups (and their contractors and subcontractors) access and / or do work

More information

Adjustable Angle Pull-Thru Knife Sharpener. Edge Pro Pull-Thru Knife Sharpener. 8 Diamond Tri-Hone. 6 Diamond Tri-Hone PRO SERIES

Adjustable Angle Pull-Thru Knife Sharpener. Edge Pro Pull-Thru Knife Sharpener. 8 Diamond Tri-Hone. 6 Diamond Tri-Hone PRO SERIES SMITH S Smith s, the Edge Experts since 1886. From their humble beginnings as a small Arkansas stone company to their current position as the market leader in the knife and scissor sharpening category,

More information

Fitting instructions T-Flex Flexi Tank for Trucks

Fitting instructions T-Flex Flexi Tank for Trucks Fitting instructions T-Flex Flexi Tank for Trucks 1 What is T-Flex? T-Flex is a special flexi tank designed to carry non hazardous liquids in trucks. Allows return loads of liquids when conventional cargo

More information

#6 Spill and Accident Procedures

#6 Spill and Accident Procedures Standard Operating Procedure (SOP) for filling 4L (1 gl) canisters with 1% Hydrofluoric (HF) and 1% Nitric (HNO3) acid mixture for use in the Ultrasonic bath #1 General Process Description This SOP describes

More information

PATRIOT INSTRUCTION MANUAL SL300ES, 300ES MEAT SLICER

PATRIOT INSTRUCTION MANUAL SL300ES, 300ES MEAT SLICER PATRIOT INSTRUCTION MANUAL SL300ES, 300ES-12 12 MEAT SLICER This manual contains important information regarding your unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance.

More information

Aircraft Maintenance Engineer Licensing

Aircraft Maintenance Engineer Licensing AIRWORTHINESS NOTICE No 2 Issue 5 November 2017 Aircraft Maintenance Engineer Licensing 1 Introduction The Civil Aviation Directive SCAA CAD PEL- 16 incorporates Annex III (Part 66) to the European Commission

More information

MAX Series 9514 OPERATOR S MANUAL

MAX Series 9514 OPERATOR S MANUAL MAX Series 9514 OPERATOR S MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet

More information

LONGMEADOW PARKS & RECREATION HEALTH CARE POLICY FORM SECTION SUMMER DAY CAMPS

LONGMEADOW PARKS & RECREATION HEALTH CARE POLICY FORM SECTION SUMMER DAY CAMPS LONGMEADOW PARKS & RECREATION HEALTH CARE POLICY FORM SECTION SUMMER DAY CAMPS 1. Health Care Consultant: Dr. Robert Leavitt Telephone: 567-4500 734 Bliss Road, Longmeadow Health Supervisor: Kelly Zieba,

More information

Butler Tactical Parachute Systems, LLC

Butler Tactical Parachute Systems, LLC Butler Tactical Parachute Systems, LLC A division of Butler Parachute Systems Group, Inc. TT-600 TETHERED TANDEM BUNDLE DELIVERY SYSTEM ASSEMBLY MANUAL (Revision A) Page 1 of 40 INTRODUCTION This manual

More information

1000S Premium Automatic Slicer Operator s Manual

1000S Premium Automatic Slicer Operator s Manual 000S Premium Automatic Slicer Operator s Manual Persons under the age of 8 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor employment standards administration

More information

Section 13. Job Safety Analysis

Section 13. Job Safety Analysis Section 13 Job Safety Analysis Table of Contents Operating an ATV... 001 Chainsaw Operations... 002 Operating Jack Hammer... 003 Planting IP s... 004 Planting Lathe/Hubs... 005 Working On Or Around Roadways...

More information

Fluke Networks offers a wide range of network installation tools each one designed to streamline the network installation job

Fluke Networks offers a wide range of network installation tools each one designed to streamline the network installation job Insert Section Name Tools and Test Kits Fluke Networks offers a wide range of network installation tools each one designed to streamline the network installation job Fluke Networks offers the most reliable

More information

SOURCE: Infection Prevention & Control (IPC)

SOURCE: Infection Prevention & Control (IPC) GUIELINE TITLE Infection Prevention & Control (IPC) Guidelines For Correctional Centre Code Bags: Contents, Use, Cleaning And Restocking RELATE OCUMENTS June 17, 2013 SOURCE: Infection Prevention & Control

More information

Skills Session: Woods Tools Knife, Camp Saw, and Axe

Skills Session: Woods Tools Knife, Camp Saw, and Axe Skills Session: Woods Tools Knife, Camp Saw, and Axe Time Frame: 1 Hour Materials: Resources: Goals: There should be one each of the following items for every two participants: Knife Axe Camp Saw Sharpening

More information

SERVICE MANUAL- M126

SERVICE MANUAL- M126 SERVICE MANUAL- MANUAL CAN OPENER- MODEL # 2 1 Model #2 Can Opener Assembly Procedure The Model #2 can opener will be assembled according to the following procedure. I. Model #2 Handle and Arbor Assembly

More information

1. INTRODUCTION GENERAL INFORMATION WORKING PRINCIPLE CUTTING SECTION SPECIFICATIONS INSTRUCTIONS FOR USE 5

1. INTRODUCTION GENERAL INFORMATION WORKING PRINCIPLE CUTTING SECTION SPECIFICATIONS INSTRUCTIONS FOR USE 5 MK2000 User Guide What s in this guide 1. INTRODUCTION 3 1.1. GENERAL INFORMATION. 3 1.2. WORKING PRINCIPLE. 3 1.3. CUTTING SECTION.. 4 1.4. SPECIFICATIONS.. 5 2. INSTRUCTIONS FOR USE 5 2.1. UNPACKING

More information

UNMANNED AERIAL SYSTEM (UAS) POLICY

UNMANNED AERIAL SYSTEM (UAS) POLICY UNMANNED AERIAL SYSTEM (UAS) POLICY Colby College 5500 Mayflower Hill, Waterville, ME 04901 REVISION HISTORY The UAS Policy will be reviewed and revised annually by the EHS Director. Additional revisions

More information