Tiflex Hose. General Catalog

Size: px
Start display at page:

Download "Tiflex Hose. General Catalog"

Transcription

1 Tiflex General Catalog

2 Handling of Guide for Selection General Heavy Duty / Abrasion Resistant Antistatic Abrasion Resistant Food Grade, Oil Resistant Duct Heat Resistant Duct Non-PVC Other Cuff Joint for Heat Resistant Fitting Method of Metal Fixture and Clamp Technical Data To use a hose more safely for a long time Guide for Selection Tiflex F-3 type Tiflex FF type Tiflex WT type Tiflex WS type Tiflex WR type Tiflex WR-S type Tiflex FC type Tiflex Antistatic W type Tiflex E type Tiflex WA type Tiflex Abrasion Resistant E type Tiflex Food F type 23 Tiflex Oil Resistant F type 23 Tiflex GL type 25 Tiflex GL-2 type 25 Tiflex N type 26 Tiflex Abrasion Resistant GL type 27 Tiflex Abrasion Resistant GL type Cuff 27 Tiflex Oil Resistant GL type 27 Tiflex GL-E type 28 Tiflex GL-ST type 29 Tiflex P type, P-2 type 30 Tiflex Flame Retardant P type 31 Tiflex A type 32 Tiflex AP type 34 Tiflex V series PAL type 35 Tiflex V series AG type 35 Tiflex V series FP type 36 Tiflex V series SUS type 36 Silicone Rubber Duct TS type Silicone Rubber Duct GS type Ti-Eco Light FF type 39 Ti-Eco Light WT type 39 Ti-Eco Light Antistatic W type 40 Ti-Eco Light WS type 40 Ti-Eco Light GL-V type 41 Ti-Eco Light GL type Tiflex NH-1 type Industrial Cleaner Hinet Cuff for Tiflex GL, GL-E, and GL-ST type Cuff for Tiflex N type Cuff for Tiflex P, P-2 and Flame Retardant P type End Cuff for Tiflex A type Reducing Joint Nipples Fitting Method of Metal Fixture Metal Fixture and Clamp Standard Combination Table of Fixture and Clamp Metal Fixtures (Dimension Table) Clamps (Dimension Table) Chemical Resistance Guide, Unit Conversion Table and etc

3 Handling of (Tiflex ) To use a hose in more safety and for a longer time, please make sure to read "Instruction for Use", "Instruction for Plumbing", "Instruction for Storage, "Instruction for Transportation", "Instruction for Maintenance", and "Metal Fixture and Band". We are not responsible for a damage in case you do not comply strictly with these instructions. Instruction for Use Value of working pressure shall be expressed as maximum working pressure in case that hose is used at 20 degrees C being bent more than its bending radius. s are not suitable for the usage that almost same amount of pressure as its working pressure is continuously applied to a hose. pressure is not a maximum working pressure. Use with the following pressure if pressure is continuously applied for a long time. (under normal operation pressure) General suction hoses 1/4 or less than each working pressure WS, WR, WR-S, FC Type 2/3 or less than each working pressure cannot be used being buried in the ground. It might be damaged by earth pressure or the hose material might be deteriorated by bacteria affection in the ground. Handle slowly and take 3 seconds or more for valve opening and closing not to apply hammer pressure. might be broken due to applying hammer pressure. might be discolored/hardened or cracked by ozone due to material deterioration by ultraviolet of sunlight or fluorescent light. If there is a sign of discolored or cracked hose, exchange it to new one immediately. Use hose as a consumable item. Refer to each page of hose for its working pressure. Never use non-food use hose for food use. You might Please note that working pressure differs by size be punished under the provision of law. even if hose type is same. performance (working pressure, end-of-life period, etc.) is under the influence of ambient temperature, fluid temperature, bending status, combination of metal fixture and band. In case that ambient temperature and fluid temperature are 50, working pressure will be about 1/2 compared with that when they are 20 There are some unusable fluids (acid, alkali, solvent, oil, and chemicals) which affects hose material with swelling or cure phenomenon. Refer to the Chemical Resistance Guide for its availability. Use with 1/3 of working pressure even if it is available. Especially, never use hose(s) with high concentration acid/alkali or highly explosive and flammable chemicals. It might severely damage a human body if a hose breaks while in use. In case of use at upstroke part of submersible pump, hose might be damaged due to the hammer pressure at the pump down time. Set the pump pressure less than 1/3 of working pressure. Never use hose for medical application. You might be punished under the provision of law. Do not use hose as pipe for compressed air. It might cause an accident by hose burst depending on use conditions. Please consult us when you use hose for high purity chemical transportation. Component of hose might be eluted into fluid. Do not use hose for an application other than specified application (fluid) in this catalog. Used hose should be discarded by disposal rules in each area. Product containing PVC may generate dioxin when incinerated under 800. Consider not to harm human body or surrounding equipment just in case even if hose is damaged at plumbing. We recommend to use high pressure hose such as WS, WR, WR-S, or FC type which can not be stretched so much even under pressure. Instruction for Plumbing Plumb hose with allowance because it can be stretched and contracted by pressure. Do not use hose putting in sheathing pipe or side ditch. Hard part of hose might be damaged and water leakage might happen due to the hose stretch. In addition, protect hose with cushion or protection tube, etc. if a hose contacts with equipment(s) or others due to its stretching and contracting, or its swinging. In case a hose is used fixing the both ends, use it under 1/2 of working pressure. In such case, bending radius of the hose might be shortened in part and it might be damaged due to stretch by pressure. life might be significantly shortened if you use a hose bending it with shorter bending radius than that specified in this catalogue as bending radius. In case that hose is used being extremely bended near the metal fixture, the hose life might be significantly shortened. Plumb a hose making 1~2 meters length of straight part near the metal fixture. s are consumable goods. As a hose is used for a Do not sling a hose horizontally. It might be broken. certain period, it gradually deteriorates. Exchange the Be careful not to make an impact to a hose and not to hose to new one immediately in case there is a defect be trapped under vehicle or the other heavy load. or the sign. Do not move machine by pulling a hose or do not move machine or vehicle when hose is still connected. 4

4 Handling of (Tiflex ) Instruction for Storage should be stored in indoor cool and dark space not to be exposed to direct sunlight or wind and rain. If you store a hose outdoors, it might get discolored or deteriorated by ultraviolet, and rainwater or dust might get into the hose. Roll a hose with its bending radius or longer, or put it in straight on flat and smooth surface. If hose is extremely bended or stored being put on unlevel surface, it might be deformed. Do not store a hose being touched rubber product. Otherwise it might be discolored. Store a used hose in a flat place avoiding direct sunlight after removing residues inside of the hose as much as possible and washing. Do not stack hose in piles or do not put heavy load on a Do not remain hose on walkway. It may cause injury by hose. Otherwise hose might be deformed. tripping over or stepping. Instruction for Transportation Do not pull or lug a hose on the ground. It may cause When sling up a hose, apply multipoint sling up (Avoid surface damage or hole of hose. one point sling up). Do not throw or impact a hose. It might be broken. Instruction for Maintenance Daily Check Perform an appearance check before daily use. In case there is a defect, exchange the hose to a new one immediately, or take measures such as defect removal. 1 Appearance Check Stop using a hose immediately and exchange it to a new one if following defects are found. A. Defect near metal fixture -> Stretch in part, swelling, curve, leakage B. External flaw -> External big flaw, crack in hose hard part, cracks at valley between pitches of hose C. defect -> Crack, deformation, breaking, inner swelling and peeling D. Other marked deterioration -> Marked discolor, hardening, swelling, crack, and etc. 2 Water pressure test Stop using a hose immediately and exchange it to a new one when a regular test value becomes more than 1.5 times of initial value regarding stretch ablility of new hose under pressure as criteria. Test must be performed under working pressure. High pressure beyond necessity may shorten hose life. Test periodically for connection part, coupling part, clamping part and etc. of a hose because they will be loosened during use. We are not responsible if above mentioned instructions are not followed. Metal Fixture and Band Outer diameter of the nipple which is inserted in a hose should be sub equal or a little longer than inner diameter of the hose. In case OD of a nipple is shorter than ID of a hose, an accident such as water leakage or metal fixture detachment may occur. To ensure enough tightness, please read instructions carefully before using commercially available metal fixture or band. Depends on the shape of the fixture or band, working pressure of a hose cannot be maintained or cannot be assembled, so please consult us in advance. Please consult us for supply metal fixture beforehand in the same way as the above mentioned paragraph. Please note that heavy duty of a hose may change depending on type of hose band, number of hose band, and clamping force. When the material of a nipple or a contact substance is synthetic resin, hose component might move into and the nipple or contact substance might be deteriorated or color might be changed. So please evaluate adequateness enough or consult us. 5

5 Guide for Selection Type Name of Product Diameter (φ) Fluid / Application General Heavy Duty /Abrasion Resistant Tiflex Antistatic W type Antistatic Tiflex E type Food Grade Non-PVC Tiflex F-3 type Tiflex FF type Tiflex WT type Tiflex WS type Tiflex WR type Tiflex WR-S type Tiflex FC type Tiflex Food Grade F type Tiflex Oil Resistant F type Ti-Eco Light FF type Ti-Eco Light WT type Ti-Eco Light Antistatic W type Ti-Eco Light WS type / Tiflex WA type Abrasion Resistant Tiflex Abrasion Resistant E type Oilproof Others Hi-Net 4-50 Plastic material for molding, powders and granules Dust, slurry and grit Powders and granules (Iron powder, sand, etc) Liquid foods (Sake, soy sauce, vinegar, soft drinks) Mineral oil, plant and animal oil Water, Muddy water, slurry and etc. Muddy water, sand, gravel, cement, slurry Mortar, cement fluid Water, muddy water, slurry, liquid food and etc. Water, air, powders and granules Suited for delivery and suction use due to smooth inside/outside surface construction Thickness version of Tiflex F-3 type Excels in flexibility Heavy duty type of Tiflex WT type Maximum working pressure: 1.0MPa {10.2kgf/c m2 } (0.50MPa {5.1kgf/c m2 } for φ300) Maximum working pressure: 2.0MPa {20.4kgf/c m2 } For mortar conveying, excels in heavy duty and abrasion resistance Antistatic type of Tiflex WT type. Smooth inside/outside surface construction, with grounding wire Excels in heavy duty and abrasion resistance Upgraded type of Tiflex E type in abrasion resistance Complies with Food Sanitation Law Smooth inside/outside surface construction oilproof hose Eco-friendly hose Complies with Food Sanitation Law Excels in lightweight and flexibility, Complies with Food Sanitation Law It is minimum usable bending radius which is a distance to the central axis of hose. should not be used with a shorter bending radius than the minimum bending radius. Key Terms Deformation Temperature under Reduced It is usable maximum pressure in It is temperature which a straight the range of use from straight pipe pipe deforms under reduced to bent pipe with bending radius at pressure at -0.1 MPa/-760mmHg. 20. Please note that the working It is not available temperature limit. pressure may change depending on service temperature, flexural state, combination of clamp and band. In case that pressure is continuously applied for a long period, hose should be used with less pressure than 1/4 of the allowable value (2/3 for Tiflex WS, New WR, WR-S, FC). Comparative table Inch 3/ /4 1 1/ / Mm For more information about each hose, please refer to each product page. pressure and deformation temperature under reduced pressure are indicated as a rough guide on performance for hose as single body. It depends on hose diameter, metal fixture, fitting method, and usage. For more information, please refer to each product page. 6

6 Range at 20 for Each Type MPa (kgf/c m2 ) at 40 MPa Deformation Temperature under Reduced ( ) Service Temperature Range ( ) Page General Heavy Duty /Abrasion Resistant Antistatic Abrasion Resistant Food Grade Oilproof Non-PVC Others ~ ~ ~ ~ ~ ~ ~ ~ ~ Conversion of Unit 1MPa = kgf/cm2 1MPa = atm 1MPa = mmaq 1MPa = mmhg 1MPa = 1000KPa = Pa 7

7 Guide for Selection Type Name of Product Diameter Fluid / Application General Abrasion Resistant Oilproof General Spot Air Conditioner Tiflex GL type Tiflex GL-2 type Tiflex N type Tiflex Abrasion Resistant GL type Tiflex Oil Resistant GL type Tiflex GL-E type Antistatic Tiflex GL-ST type Heat Resistant Tiflex P/P2 type Tiflex Flame Retardant P type Tiflex A type For air Little airflow loss due to smooth inside surface Air, wood powder, dust Lightweight type of Tiflex GL type Tiflex AP type Tiflex V series PAL type Tiflex V series AG type Tiflex V series FP type Tiflex V series SUS type Using metallic wire for reinforcement Powders and granules (Iron One of Tiflex GL types, excels in abrasion resistance powder, aluminum powder, metallic powder, etc) and heat resistance For recovery of oil mist Stretchable Air (include hot air) Self-extinguishing For spot cooler For air conditioning For air conditioning and hot air generator & circulation system For air conditioning and hot air generator & circulation system For equipment for pollution control and burning Using oil resistant special material (soft part of hose) which is hardly hardened against lubricant oil, cutting oil and etc Dust collection for wood One of Tiflex GL types, using grounding wire working machine One of Tiflex GL types, transparent and antistatic Freely stretchable and freely fixable Continuous usable temperature is 100 or lower. Have airtightness. Continuous usable temperature is 130 or lower. Continuous usable temperature is 180 or lower. Continuous usable temperature is 250 or lower. Continuous usable temperature is 400 or lower. Silicone Duct SRDH TS type Silicone Duct SRDH GS type For air conditioning For air conditioning Heat resistant duct hose with air tightness. Heat resistant duct hose with air tightness. Non-PVC Ti-Ecolight GL-V type Ti-Ecolight GL type For air, dust, exhaust air, flue gas For air, wood powder, dust, food Eco-friendly hose. Large diameter, light weight, and flexible. Eco-friendly hose. Complies with Food Sanitation Law Flame Retardant Tiflex NH-1 type For air conditioning Antistatic Industrial Cleaner 38 For cleaner Excels in stretchability, bendability, and heat insulating properties. Qualified product as flame retardant material. Flexible and well usability. It is minimum usable bending radius which is a distance to the central axis of hose. should not be used with a shorter bending radius than the minimum bending radius. Key Terms It is usable maximum pressure in the range of use from straight pipe to bent pipe with bending radius at 20. Please note that the working pressure may change depending on service temperature, flexural state, combination of clamp and band. For general use, hose should be used with less pressure than 1/4 of the allowable value. Allowable Reduced (at normal temperature) It is maximum negative pressure which can be applied to a hose at normal temperature. s can not be used with any more negative pressure than that. In addition, the allowable reduced pressure gets lower in case that the service temperature becomes higher. Comparative table Inch 3/ /4 1 1/ / mm

8 Type General Range at 20 for Each MPa (kgfc m2 ) at 40 MPa Service Temperature Range ( ) -10~50-10~50-10~50 Cuff Available Available Available Page Abrasion Resistant ~80 Available (Only φ38, φ50) 27 Oilproof ~50 N/A 27 Antistatic General ~50-20~80-20~80 Available Available Available Spot Air Conditioner - - Available ~100-20~130 N/A N/A ~180 N/A 35 Heat Resistant ~250 N/A ~ ~ ~200 N/A Selectable Selectable Non-PVC ~50 N/A Available 41 Flame Resistant Antistatic ~80 - N/A 43 Available 43 For more information about each hose, please refer to each product page. pressure and deformation temperature under reduced pressure are indicated as a rough guide on performance for hose as single body. It depends on hose diameter, metal fixture, fitting method, and usage. For more information, please refer to each product page. Conversion of Unit 1MPa = kgf/cm2 1MPa = atm 1MPa = mmaq 1MPa = mmhg 9

9 General Reliable items focused on fundamental performance such as heavy duty, heat resistance, bending radius and etc. Used for conveying system in wide range of industrial fields. 10

10 Tiflex F-3 type Transparent making it possible to confirm the contents. Light in weight and easy to bend making handling easy. Suited for suction and delivery use. Flexible PVC (Transparent) Rigid PVC (Gray) Suction and draining of agriculture and civil engineering work. Sizes and properties (F3- ) ± ± ± ± ± ± [6.1] ± [2.5] 55 1,400 1, ± [5.1] ± [4.6] ± [4.1] [3.1] [3.1] [2.5] 55 1, ,200 1, ± [2.5] 55 1,450 2, ± Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 0.25 [2.5] 50 2, [2.5] 50 2, ,100 4, [2.0] 45 3,000 7, Tiflex FF type Thickness version of Tiflex F-3 type Transparent making it possible to confirm the contents. Easy to handle due to lightweight and easy bending. Suited for suction and delivery use. Sizes and properties (FF- ) Suction and draining of civil engineering work ± ± ± ± ± ± ± ± [6.1] 0.40 [4.1] 127.0± [3.1] [5.1] [4.6] [3.6] 0.35 [3.6] [3.6] [3.1] ± [3.1] ± ± [2.5] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) [2.0] ,000 1, ,290 1,700 2,270 2,830 2,300 3,700 2,700 Flexible PVC (Transparent) Rigid PVC (Gray) 4,800 2,900 8,

11 Tiflex WT type WT type is right-handed. (However, following are left-handed.) Spiral shape of outside makes it affluent in flexibility. Transparent making it possible to confirm the contents. Suited for suction use. Flexible PVC (Transparent) Rigid PVC (Transparent) Sizes and properties (WT- ) Suction and draining of agriculture and civil engineering work. * * * * * * ± * are able to connect directly to SGP duct. ( ) are custom-made products. Please consult us for φ165 (Left-handed) [3.1] ± [3.1] ± [3.1] ( 48.6) 49.0± ± ( 60.5) 60.5± [2.5] [2.5] [2.5] , ± [2.5] , ± [2.5] , ± ± [2.0] 55 ( 115) 115.0± ± ± ± Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 0.25 [2.5] , [2.0] , , [1.5] , [1.5] , [1.0] 45 1,000 8,

12 Tiflex WS type Heavy duty type of WT type. WS type is right-handed. Excels in pressure resistance due to reinforcement cord. Light in weight and excels in flexibility. Flexible PVC (Transparent) Rigid PVC (Rose-red) Flexible PVC (Transparent) Reinforced cord Suited for delivery and suction use. Sizes and properties (WS- ) Suction and draining for civil engineering work and etc ± ± pressure is different depending on fitting method of metal fixture and band. (Thorough care should be observed when fitting at work sites.) ( ) are custom-made products [5.1] ± [5.1] [5.1] ± [5.1] ± [5.1] , ± [5.1] , ± [5.1] ± , [5.1] , [5.1] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 5, [5.1] 50 1,200 8,700 (250) (300) [2.5] 50 1,800 11, [2.5] 45 2,100 19, (50) WS type, Outer Socket Caulking WS type, R-Power Band Tightening 13

13 Heavy Duty/ Abrasion Resistant Usable when pressure resistance is necessary. In addition, these hoses excel in durability compared with general plastic hoses by use of special material for abrasion resistance. 14

14 Tiflex WR type Excels in pressure resistance with its working pressure 1.0MPa {10.2kgf/c m2 } (In case of outer tube caulking or inner tube expansion metal fitting.) Suction and discharge of muddy water such as muddy water shield and reverse. Muddy water suction and pressure discharge in civil engineering work. Suction and discharge in case that pressure resistance and abrasion resistance are required (250) 254.0± pressure is different depending on fitting method of metal fixture and band. (Thorough care should be observed when fitting at work sites.) ( ) are custom-made products. pressure by fitting method of WR type and metal fixture Diameter (φ) Fitting Method 38.1± ± ± ± or less ± ± ± WR type is right-handed. Excels in abrasion resistance by use of special material for inner layer. Long lengths available making Dimension and property (WR- ) efficiency upgrading of piping work possible. (300) 203.0± ± [10.2] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 1.00 [10.2] [10.2] [10.2] [10.2] [10.2] 50 4, [5.1] [10.2] 60 Flexible PVC (Black) Rigid PVC (Orange) [10.2] 60 2, ,300 1, ,200 1,250 4, [10.2] 60 2,000 7,260 Special material for abrasion Reinforced cord 1,500 5,595 18, ,000 21, (50) 12, Unit: MPa {kgf/c m2 } R-Power 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 0.7 [7.1] 0.50 [5.1] 0.50 [5.1] Band Welding 0.30 [3.1] Outer Tube Caulking 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] Inner Tube Expansion 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 0.50 [5.1] WR type, Outer Socket Caulking WR type, R-Power Band Tightening and Welding 15

15 Tiflex WR-S type (Custom-Made-Product) WR-S type is right-handed. Example of Metal Fixture Fitting Flexible PVC (Black) Rigid PVC (Rose-red) Special material for abrasion Reinforced cord pressure is 2.0MPa {20.4kgf/c m2 }. (in the case of inner tube expansion metal fitting.) Excels in abrasion resistance by use of special material for inner layer. Long lengths available making efficiency upgrading of piping work possible. Suction and discharge of muddy water such as muddy water shield and reverse. (Especially suited for sludge removal piping of shield.) Muddy water suction and pressure discharge in civil engineering work. Suction and pressure discharge of sand, gravel and sludge. Suction and discharge in case that pressure resistance and abrasion resistance are required. Sizes and properties (WRS- ) ± Deformation Temp. (-0.1MPa/- 760mmHg) ( ) ± [20.4] 65 1,500 5, ± [20.4] 65 2, [20.4] 65 3,250 14, , The metal fitting shall consist of an inner tube expansion system so that the hose thoroughly exhibits its heavy duty performance. Tiflex FC type (Mortar ) FC type is right-handed. Example of Metal Fixture Fitting Excels in pressure resistance due to low stretchability under pressure. Excels in abrasion resistance. Fluid can flow smoothly because inner surface is flat and smooth by use of inner tube expansion metal fitting (In the case that hose and fixture are fitted by us.) Sizes and properties (FC- ) 38 Flexible PVC (Gray) Rigid PVC (Gray) Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 38.5± [15.3] ± [15.3] Special material for abrasion Reinforced cord 1,180 1, discharge of mortar at shield construction. discharge of high viscosity substance. 16

16 Antistatic Have a beneficial effect on antistatic in transportation of powder, grain, and plastic pellet. 17

17 Tiflex Antistatic W type Example of Metal Fixture Fitting Excels in static prevention effects by use of anti-static build-up PVC. Transparent making it possible to confirm the contents. Conveying of plastic pellets. Conveying of powders and grains. Sizes and properties (W[D]- ) ± [3.1] ± [2.5] ± ± ± [2.5] ± ± ± ± [2.5] [2.5] [2.5] 63.5± [2.5] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 0.25 [2.5] [1.5] [1.5] , , ± [2.0] , Antistatic Flexible PVC (Transparent) Rigid PVC (Gray) ,100 2, (50) Antistatic Effect Measured each maximum voltage which is charged to φ38mm hoses after rigid PVC pellets were conveyed. E type, Abrasion Resistant E type (In case that grounding wire is connected to conductive material) GL-E type GL-ST type Antistatic W type WT type Charged Voltage (V) These are not standard values, but test values. 18

18 Tiflex E type Example of Metal Fixture Fitting Flexible PVC (Transparent) Rigid PVC (Transparent) Grounding wire Excels in antistatic effect by use of grounding wire. Transparent making it possible to confirm the contents. Suited for delivery use. Conveying of plastic pellets. Conveying of powders and grains. Sizes and properties (E- ) ± ± (60) 61.2± ± ± ± (45) 44.2± (32) 32.0± [5.1] 0.50 [5.1] 0.45 [4.6] [4.1] [4.1] [4.1] [3.1] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) (48.6) 49.3± [4.1] ± [4.1] , ,000 1,320 1,630 1,840 2,180 ( ) are custom-made products. For antistatic effect, please refer to P [3.1] 55 1, , Thorough attention should be placed in abrasion of the inner surface by reason that fragments of the grounding wire will get mixed into the conveyed matter when the grounding wire becomes exposed by abrasion of the inner surface during use of the E type for which reason the hose should be replaced with a new hose beforehand. Pulling out method of copper wire for E type & Antistatic E type 1. Apply a knife along the hose rigid part and cut the soft part. At this time, make sure that copper wire remains at the edge face of hose. 2. After the cut of required length of hose soft part for pulling out copper wire, cut in hose rigid part at around of nick end with a knife, and off the nicked part. Hard part cut in Copper wire 3. Make cut into edge face of the hose along copper wire. Be careful not to cut yourself with a knife. 4. Pull out the copper wire 19

19 Abrasion Resistant Excels in durability compared with general plastic hoses by use of abrasion resistant special materials. 20

20 Tiflex WA type WA type is right-handed. Example of Metal Fixture Fitting Excels in heat resistance, can stand against 100 hot-blast in straight duct. Excels in antistatic effect by use of hard steel wire. discharge of gravel, mineral slurry, and sandblast. For recovery of burned ash. For conveying grains such as rice, flour, and corn. Sizes and properties (WA- ) ± [1.0] ± ± ± ± [1.0] [1.0] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) [1.0] [1.0] [1.0] ± [1.0] ± ± [1.0] Special Synthetic synthetic rubber (EPDM) (Black) Olefinic resin Hard steel wire 860 1, ,560 2,070 2, ,950 4, ± [1.0] 90 1,000 7, Tiflex Abrasion-Resistant E type Example of Metal Fixture Fitting Excels in antistatic effect by use of grounding wire. Transparent making it possible to confirm the contents. Excels in abrasion resistance by use of abrasion resistant plastic as material of hose inner layer. Conveying of powders and grains. discharge of iron powder, sand blast and etc. Sizes and properties (E[M]- ) ± [5.1] For antistatic effect, please refer to P18. Deformation Temp. (-0.1MPa/- 760mmHg) ( ) ± [4.1] , ± [4.1] , ± ± [4.1] , [3.1] 55 1,100 2, ± [3.1] 55 1,120 3, ± [2.5] 151.6± ± [2.0] Flexible PVC (Transparent) Rigid PVC (Transparent) Abrasion resistant urethane resin(transparent) 50 1,650 4, [2.0] 50 1,980 Grounding wire 6, ,970 9,

21 Food Grade and Oil Resistant Food Grade Fairly trusted by food industry as food conveying hose due to high operating efficiency. Material of the portion in contact with food complies with the Standard of Apparatus, containers and packaging based on Food Sanitation Act. Oil Resistant Suited for conveying of oil and alcohol by use of good oil resistant material. In addition, provides same level of features as general hoses. 22

22 Tiflex Food F type Example of Metal Fixture Fitting Nonuse of phthalate compounds. Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act. Can be conveyed even fat, oils and fatty foods. Sizes and properties (F[SH]- ) ( ) are custom-made products. For conveying of alcohol, soy sauce, Thorough attention should be placed in abrasion of the inner surface by reason that fragments of the rigid material will get mixed into the conveyed matter when the rigid part and soft drinks. becomes exposed by abrasion of the inner surface during use for which reason the hose For conveying the other foods. should be replaced with a new hose beforehand ± [5.6] Deformation Temp. (-0.1MPa/- 760mmHg) ( ) (32) 32.0± [5.6] ± ± (65) (75) [5.1] [5.1] (100) [4.6] [4.6] [3.6] Flexible PVC for food (Transparent) Rigid PVC (White) ,200 1,600 2,010 1,100 3,000 (125) [3.1] 55 1,500 3, (20) Tiflex Oil Resistant F type (Custom-made product) Oil Resistant F type is right-handed. Example of Metal Fixture Fitting Using special material (soft part of the hose) excels in oil resistance. Light in weight and easy to bend making handling easy. Suited for delivery use. Conveying of mineral oil, animal/plant oil, alcohol and etc. Sizes and properties (F[Y]- ) ± ± ± Deformation Temp. (-0.1MPa/- 760mmHg) ( ) 0.6 [6.1] [5.6] [5.1] ± [5.1] , ± [5.1] , ± ± [5.1] [4.1] Oil resistant flexible PVC (Black) Rigid PVC (White) , , ,

23 Duct Reliable item focused on fundamental performance. Used for conveyance system of wide industrial field which requires higher air/powder conveying performance and abrasion performance. 24

24 Tiflex GL type Light in weight and easy to carry. Excels in flexibility. Excels in chemical resistance such as acid and alkalis. In addition, its low flow resistance makes high conveying capacity attainable. For air conditioning. Suited for collecting use of powders and grains for dust collect machine. Can be use for air conveying of general machineries including woodworking machines, powder spraying machines, and general dust collectors. Sizes and properties (GL- ) ± ± ± ( ) are custom-made products. Please consult us for φ225, φ275. Exclusive cuff is available [0.1] Allowable Reduced KPa or less/ [mmhg or less] ± [0.6] [-500] 35 (45) 43.7± (115) (165) (175) [0.5] [-500] [0.4] [-500] ± [0.3] 0.02 [0.2] [-160] [-110] [0.2] [-78] [0.4] [-250] ± [0.2] , ± [0.1] -6.0 [-45] 210 2, , ± [0.1] -3.0 [-23] 310 3, ± [0.3] [-250] ± ± [0.6] [0.5] [-500] [-150] [-150] [0.2] [-110] 0.02 [0.2] Flexible PVC (Gray) -5.0 [-35] Rigid PVC (Gray) [0.6] [-500] [-500] , , ,510 1, Tiflex GL-2 type Lighter in weight than current duct hoses (About 50% lighter in weight than our other hoses.) For air conditioning. (Custom made product) Excels in flexibility. Excels in chemical resistance such as acids and alkalis. Low flow resistance makes high Sizes and properties (GL2- ) conveying capacity attainable ± ± ± ± ± ± [0.4] [-330] [0.4] [-210] [0.3] [-140] [0.2] [0.2] 0.02 [0.2] Flexible PVC (Gray) Allowable Reduced KPa or less/ [mmhg or less] -9.0 [-70] Rigid PVC (Gray) -6.0 [-45] [-30]

25 Tiflex N type Light in weight and easy to carry. Excels in flexibility. Excels in chemical resistance such as acids and alkalis. Less thermal deformation by use of metal wire as core wire. Since wire might be exposed from a hose end, hose should be handled carefully. Sizes and properties (N- ) ( ) are custom-made products. φ350x20m and φ400x20m are also custom-made products. Exclusive cuff is available. Allowable Reduced KPa or less/ [mmhg or less] For air conditioning. Suited for collecting use of powders and grains for dust collect machine ± [0.6] [-760] Can be used for air conveying and ± [0.6] [-760] exhaust of general machineries ± [0.6] [-760] including woodworking machines, ± [0.6] [-760] powder spraying machines, and ± [0.6] [-760] general dust collectors. (45) 45.5± [0.5] [-760] ± [0.5] [-760] [0.4] [-550] [0.4] [-250] [0.3] [-250] [0.2] [-150] [0.3] [-160] , [0.2] [-110] 130 1,590 (175) [0.2] [-100] 170 1, [0.1] [0.1] -8.0 [-62] 200 2, [0.1] -6.0 [-45] 250 3, [0.1] -5.0 [-35] [0.05] -2.0 [-15] Flexible PVC (Gray) Rigid PVC coating (Gray) Hard steel wire 4, [-23] 350 5, ,

26 Tiflex Abrasion Resistant GL type Abrasion Resistant GL type is right-handed. Excels in abrasion resistance as well as usable in a wide temperature range from low to high temp. (about -30 ~ 80 ) Excels in conductivity and endowed with antistatic effects. Excels in weather resistance. Sizes and properties (GL[M]- ) Suits for conveying of powders and particles, dust collection, hot air conveying and exhaust. Conveying of powders and grains. Conveying of iron powder, aluminum powder, metal powder, etc. Conveying of wooden chips, pieces of paper and hulled grains. Hot air conveying and exhaust. Duct collection, conveying and exhaust requiring abrasion resistance, conductivity and heat resistance ± [0.5] [-500] ± [0.5] ± [0.4] [-500] ± ± ± [0.4] 0.03 [0.3] 0.03 [0.3] Allowable Reduced KPa or less/ [mmhg or less] ± [0.2] [-150] ± ± [0.2] 0.01 [0.1] Synthetic rubber (EPDM) [-488] [-250] [-250] [-160] [-110] Olefinic plastic (Black) , , [-45] 190 2, Exclusive cuff Structure Sizes L A I.D The hose is right-handed. B T φc Material Synthetic Rubber (EPDM) Tiflex Oil Resistant GL type Using special material (for hose soft part) with abrasion resistance which is hardly hardened against lubricant oil, cutting oil, and etc. Light in weight and excels in flexibility. Its low flow resistance makes high conveying capacity attainable. For recovery of oil-mist of lathe, milling machine, and machine tool. For conveying and exhaust air in the place where oil scatters. Sizes and properties (GL[Y]- ) ± ± [0.2] [-150] ± ± Allowable Reduced KPa or less/ [mmhg or less] [0.1] -6.0 [-45] [0.6] [-500] [0.5] [-500] [0.4] [-500] ± ± Oil resistant flexible PVC (Ivory) Rigid PVC (Ivory) [0.4] [-250] [0.2] [-110] [0.3] [-250] [0.3] [-160] ,100 1,350 2,

27 Tiflex GL-E type Transparent making it possible to confirm the contents. Cutting of hose and exposure of grounding wire are easy. Grounding can be done by utilizing the grounding wire put through the hose rigid part by which worries caused by the build-up of static electricity are overcome. Low in flow resistance making it possible to improve the conveying capacity. Dust collection of wood working machine and pneumatic conveying of powders. Indoor piping of clean room where static electricity is undesirable. Sizes and properties (GLE- ) ± ± ± [0.3] [-160] ± ± ± Exclusive cuff is available [0.2] [-150] [0.6] [-500] [0.5] 0.04 [0.4] [-250] 0.03 [0.3] 0.02 [0.2] [-250] [-110] Flexible PVC (Transparent) Rigid PVC (Transparent) Allowable Reduced KPa or less/ [mmhg or less] [-500] [0.4] [-500] Grounding wire 1,120 1, For antistatic effect, please refer to P29. Pulling out and cutting method of grounding wire Apply a knife along the hose rigid part and cut the soft part. Cut a nick into the hose rigid part with a knife. Bend the nicked part of the hose rigid part with hands several times and break this part. Slowly pull off the hose rigid part. Setting method of antistatic grounding wire Connection with Metal Fixture Connection with Steel Pipe Connection with Plastic Pipe Grounding wire Flange metal fixture In case that excusive cuff which is fitted the hose connects with a metal fixture. Steel Pipe Grounding wire In case that the cut hose connects with a steel pipe. Pipe which is not grounded such as plastic pipe Grounding wire Should be grounded directly with grounding wire is coming out from the hose in case of the connection which is difficult to ground. 28

28 Tiflex GL-ST type Transparent type of GL type. Transparent making it possible to confirm inside contents. Light weighted, flexible, and low airflow resistance as same as GL type. That makes high transport capacity. Excels in antistatic effect because the soft part is made by PVC contains antistatic substance. Dust collection of wood working machine and pneumatic conveying of powders. Indoor piping of clean room where static electricity is undesirable. *NEW PRODUCT* Sizes and properties (GL[ST]- ) ± [0.3] 127.0± ± [0.2] [-110] ± [0.1] -6.0 [-45] 210 (250) 252.0± (300) 303.0± ( ) are custom-made products. Exclusive cuff is available [0.5] [-500] 0.04 [0.4] [-500] 0.01 [0.1] Allowable Reduced KPa or less/ [mmhg or less] ± [0.6] [-500] ± ± ±1.5 Antistatic Soft PVC (Transparent) Rigid PVC (Transparent) 0.06 [0.6] [-500] [0.6] [-500] [0.4] [-250] [0.3] [-250] [-160] [0.2] [-150] ,350 (175) 175.0± [0.2] [-78] 180 1, , [-35] 260 2, [0.1] -3.0 [-23] 310 3, Antistatic Effect Measured each maximum voltage which is charged to φ38mm hoses after rigid PVC pellets were conveyed. E type, Abrasion Resistant E type (In case that grounding wire is connected to conductive material) GL-E type GL-ST type Antistatic W type WT type These are not standard values, but test values. Charged Voltage (V) 29

29 Tiflex P, P-2 type Since wire might be exposed from a hose end, hose should be handled carefully. (P type/color: Dark Brown) (P-2 type/color: White) P type P-2 type Olefinic Plastic (Dark brown) (White) Hard steel wire Excels in stretchability (rate of shrinkage 1/3 ~ 1/4). Freely stretchable and excels in accommodation property making storage convenient. Also, less space is needed for stocking. transportation cost is less making it economical. 50% lighter in weight than existing duct hoses. (Compared with Tigers Polymer's other duct hoses) Light weight and freely bendable making piping work easy. can be bent toward any direction for which reason elbow cuffs are not necessary. Sizes and properties (P-, P2- ) ± ± ± ± ± ± ± [0.03] -6.0 [-45] 140 1, ± ± ± [0.09] [-130] [0.18] [0.14] Allowable Reduced KPa or less/ [mmhg or less] [0.09] [-130] [0.07] [-130] [0.05] [-85] [-130] [-130] [0.07] [-130] ± [0.04] -8.0 [-62] [0.02] -5.0 [-35] 180 1,270 1,350 (Note) shall be measured as the distance between the helical reinforcement wires [0.02] -4.0 [-30] For spot cooling and heating. For air-conditioning. For indoor air conveying and exhaust. For exhaust of paint and gas venting. For gas conveying (include hot air). Can be shaped into various forms making it usable for interior designing as well. Test Dia. (φ) Strength (Bent 180, 25, 20 times/min) 100,000 times no change 100,000 times no change 100,000 times no change Stretching Strength (25, 20 times/min) 100,000 times no change 100,000 times no change 100,000 times no change Tensile Strength (25 ) N {kgf} 392 {40.0} 490 {50.0} 588 {60.0} There are two types. One is Tiflex P type (dark brown) and the other one is P-2 type (white). There is no difference in performance and specification. [Usable temperature range] -20 to 80 However, please consult us because there are case of the stretching performance being affected when used continuously at over

30 Tiflex Flame Retardant P type Flame retardant type of Tiflex P type. Endowed with flame retardancy which is equivalent to UL94-HB. Excels in flexibility due to the same structure as P type. (Shrinkage rate 1/3-1/4) Light in weight and freely bendable. It can make ductwork easy, improve workability and save labor. Flame retardant cuffs are also available. Sizes and properties (P[N]- ) ± ± ± [0.18] [-130] Since wire might be exposed from a hose end, hose should be handled carefully. Allowable Reduced KPa or less/ [mmhg or less] [-130] ± [0.14] [-130] [0.09] [0.09] [-130] Residential parts ± [0.07] [-130] For spot cooling and heating ± [0.07] [-130] For air-conditioning ± [0.05] [-85] For indoor air conveying and exhaust ± [0.04] -8.0 [-62] For exhaust of paint and gas venting ± [0.03] -6.0 [-45] 140 1,190 For gas conveying (include hot air) ± [0.02] -5.0 [-35] 180 1,450 Can be shaped into various forms ± [0.02] -4.0 [-30] 230 1,540 making it usable for interior designing (Note) shall be measured as the distance between the helical reinforcement wires. as well. Olefinic resin (Black) Hard steel wire (Core)

31 Tiflex A type Endowed with flame retardancy which is equivalent to UL94-V0. Freely stretchable and freely fixable. (Degree of shrinkage 30% ~ 50%) Endowed with special construction making use possible by changing the bore diameter. ( Degree of bore diameter change ±15%) Low in flow resistance and also small in abrasion. End cuffs are also available. Suited for uses such as spot cooler. Note: Not suited for applications requiring air-tightness. A type is right-handed. Sizes and properties (A- ) Exclusive cuff is available Stretch Rate (Doubled) Minimum ,000 1,250 1,500 1,690 2,000 3, , Properties Diameter (φ) Tension Strength N (kgf) Stress N (kgf) Tensile Strength N (kgf) [2.5] 3 [0.3] 1570 [160] [3.7] 4 [0.4] 1860 [190] [4.0] 6 [0.6] 2160 [220] [4.3] 7 [0.7] 2250 [230] [4.4] 8 [0.8] 2450 [250] [3.8] 10 [1.0] 2650 [270] [4.2] 12 [1.2] 2700 [275] [4.3] 14 [1.4] 2740 [280] [4.5] 16 [1.6] 2840 [290] [4.3] 20 [2.0] 3230 [330] [4.0] 25 [2.5] 3920 [400] Stretching Force : Stress : Tensile Strength : is cantilever supported, and the tension at time of pulling toward the longer direction is measured with a tension gauge. Both ends of a hose of 400mm length are fixed, and the load at time the hose bends is measured. A hose of 200mm length is pulled at a tension rate of 200mm/min in temperature of 20, and the load at time of break is measured. 32

32 Heat Resistant Duct Tiflex V series is a heat resistant flexible hose with special structure made by originally developed manufacturing method using metals and other special materials in accordance with the application. We have PAL type, AG type, FP type and SUS type and they can be selected according to its use conditions. 33

33 Tiflex AP type Heat resistant flexible hose constructed of special laminated aluminum foil and olefinic resin. Excels in airtightness due to using olefinic resin for internal and external of the special laminated aluminum. Excels in handling due to its lightweight Sizes and properties (AP- ) and flexibility. Continuous usable temperature is about 100 or lower. *NEW PRODUCT* For gas conveying (include hot air) ±1.5 For air conveying and exhaust requiring airtightness ± Olefinic Resin Allowable Reduced KPa or less/ [mmhg or less] Laminated Aluminum Dia. (φ) Strength (Bent 180, 25, 20 times/min) ,000 times Normal airtightness 100,000 times Normal airtightness 100,000 times Normal airtightness 100,000 times Normal airtightness 34

34 Tiflex V series PAL type Heat resistant flexible hose constructed of special laminated aluminum foil and galvanized steel sheet. Since both ends of a hose are sharp metallic edges, hose should be handled carefully. Reinforced material Galvanized steel sheet Laminated aluminum foil 2P Easy to store, keep, and transport due Sizes and properties (PAL- ) to light weight and free contractibility. Continuous usable temperature is about 130 or lower. Although using galvanized steel sheet as a reinforced material, it complies with RoHS. Note: Excels in flexibility but is not suited for repeated flexing. Note: Not suited for applications requiring airtightness. Suited for air conditioning, especially for air conveying and exhaust in a ceiling ±1.0 ( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available. Please refer to P45. Allowable Reduced KPa or less/ [mmhg or less] [0.30] [-130] ± [0.33] [-130] ± ± [0.25] [-115] [0.20] [-100] ± [0.20] [-100] ± [0.18] [-100] ± (175) 177.0± ± ± ± [0.15] -9.0 [-70] [0.13] -8.0 [-62] (275) 278.0± [0.08] -3.0 [-23] [0.10] -6.0 [-45] 200 1,120 1, [0.06] -3.0 [-23] 280 1, [0.05] -3.0 [-23] 305 1,670 5 AG type Heat resistant flexible hose constructed of special laminated aluminum foil, glass-cloth and galvanized steel sheet. Reinforced material Galvanized steel sheet Aluminum glass cloth sheet 2P Light in weight, excels in flame and Sizes and properties (AG- ) heat resistance. Continuous usable temperature is about 180 or lower. Special aluminum and glass cloth sheet which is used as a material is Class 1 Fire-Proof Material prescribed in JIS A1322. Although using galvanized steel sheet as a reinforced material, it complies with RoHS. Note: Excels in flexibility but is not suited for repeated flexing. Note: Not suited for applications requiring airtightness ± ± ± Allowable Reduced KPa or less/ [mmhg or less] ± [0.05] -3.0 [-23] 305 1,890 Suited for air conditioning, and air conveying and exhaust for hot air generation & circulation system. ( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available. Please refer to P45. Glass cloth is used for a part of the material of the AG type. It is recommended to consult us in the case of exports ± [0.33] [-130] [0.25] [-115] [0.30] [-130] ± [0.20] [-100] ± [0.20] [-100] ± [0.18] [-100] [0.15] -9.0 [-70] ± [0.10] -6.0 [-45] ,010 (175) 177.0± [0.13] -8.0 [-62] 175 1, ± (275) 278.0± [0.08] -3.0 [-23] 255 1,260 1, [0.06] -3.0 [-23] 280 1,

35 Tiflex V series Easy to store, keep, and transport due to light weight and free contractibility. Continuous usable temperature is 250 or lower. Therefore it can be used in higher heat range than PAL and AG type. Special coated glass cloth sheet which is used as a material is Class 1 Fire- Proof Material prescribed in JIS A1322. Note: Not suited for repeated flexing, but is better than PAL type and AG type. FP type Constructed of special coated glass cloth and stainless-steel copper plate (SUS304). Note: Not suited for applications requiring airtightness. Since both ends of a hose are sharp metallic edges, hose should be handled carefully. Sizes and properties (FP- ) ± ± ± ± [0.02] -3.0 [-23] 305 1,910 Suit for duct of hot air generation & circulation system. ( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available. Glass cloth is used for a part of the material of Please refer to P45. the FP type. It is recommended to consult us in the case of exports. 75.5± ± ± (175) 177.0± ± ± ± [0.18] [0.15] [0.13] [0.10] [0.10] [0.10] [0.08] [0.06] [0.05] [0.03] (275) 278.0± [0.03] Allowable Reduced KPa or less/ [mmhg or less] [-130] [-115] [-100] [-100] [-100] -3.0 [-23] -3.0 [-23] [-130] [-70] [-62] Reinforced material Stainless steel sheet Special coated glass cloth [-45] ,140 1,300 1, ,780 5 Constructed entirely of stainless steel (SUS 304). Continuous usable temperature is 400 or lower. SUS type Note: Excels in heat resistance and can be bent but is not suited for repeated flexing. Note: Not suited for applications requiring airtightness. Suit for fixed piping of equipments for pollution control, devices for physics & chemistry, and burning equipment. Since both ends of V series hose are sharp metallic edges, hose should be handled carefully. Sizes and properties (SUS- ) ± ( ) are custom-made products. (275) 278.0± [0.03] -6.0 [-45] 280 1,550 Nipple for connecting with steel pipe or two hoses connecting is also available. Please refer to P45. Allowable Reduced KPa or less/ [mmhg or less] ± [0.18] [-160] ± [0.15] [-160] ± ± ± ± [0.08] [-100] ± ± Reinforced material Stainless steel sheet Stainless foil [0.13] [-160] [0.10] [-115] [0.10] [-129] ± [0.10] [-115] (175) 177.0± [0.06] [-78] 175 1, [0.05] -9.0 [-70] 200 1, [0.03] -6.0 [-45] 255 1, [0.02] -6.0 [-45] 305 1,

36 Silicone Rubber Duct Light weighted and flexible duct hose which is constructed of heat resistant fabric of polyester cloth (Tetron) coated with silicone rubber and reinforcing wire. For conveying and exhaust of hot air, exhaust gas and etc. TS type Excels in heat and cold resistance, and can be used at -50 ~ 150. GS type Light weighted and flexible duct hose which is constructed of heat resistant glass cloth coated with silicone rubber and reinforcing wire. Excels in heat and cold resistance, and can be used at -50 ~ 200. Since wire might be exposed from a hose end, hose should be handled carefully. Dimension and property (SRDH[TS]/[GS]- ) Dia. (φ) (29) (144) (155) (170) These above mentioned values are not guaranteed values, but standard values. These standards may change without prior notice. For conveying and exhaust of hot air, The other types such as cleaner, vacuum, suction type are available. exhaust gas and etc SR coated glass cloth, or SR coated Tetron cloth (36) (42) (54) (65) (69) (79) (94) (104) (131) (183) (208) No cuff type Standard length is 2m. For a diameter or length other than those mentioned above, please consult us. Outer diameter is not guaranteed value, but standard value. Wire 37

37 Non-PVC Eco-friendly, flexible, and lightweight 38

38 Ti-Eco Light FF type For general suction and For suction and draining of agriculture, civil engineering work and etc. Eco-friendly hose due to nonuse of chlorine and plasticizer. (Can be incinerated) Lightweight makes it easy to be handled. (About 30% lighter in weight than our current PVC products.) Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act. (except fat and oil) Conveying of food. (except fat and oil) Sizes and properties (ELFF- ) ± ± ± ± [1.5] [2.0] 0.20 [2.0] Deformation Temp. (at -0.1MPa) ( ) [1.0] 60 Elastomer Olefinic Resin Ti-Eco Light WT type Eco-friendly hose due to nonuse of chlorine and plasticizer. (Can be incinerated) Spiral shape of outside, good flexibility and lightweight make it easy to be handled. (About 30% lighter in weight than our current PVC products.) Transparent making it possible to confirm the contents. Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act No.201. (except fat and oil) For general suction and draining. (particularly suitable for suction) Conveying of food. (except fat and oil) Sizes and properties (ELWT- ) ± ± [1.0] ± ± ± [1.0] 0.10 [1.0] [1.0] Deformation Temp. (at -0.1MPa) ( ) 70 Elastomer Olefinic Resin [1.0]

39 Ti-Eco Light Antistatic W type Excels in static prevention effects by use of antistatic build-up material and conductive fiber. Eco-friendly hose due to nonuse of chlorine and plasticizer. (Can be incinerated) Conveying of plastic pellets. Conveying of powders and grains. Conveying of food. (except fat and oil) Spiral shape of outside, good flexibility Sizes and properties (ELW [D] - ) and lightweight make it easy to be handled. (About 30% lighter in weight than our current PVC products.) Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act. (except fat and oil) ± ± ± ± ± ± ± ± [1.0] [1.0] [1.0] 0.10 [1.0] [1.0] 0.10 [1.0] 0.10 [1.0] [1.0] Conductive Textile Deformation Temp. (at -0.1MPa) ( ) Elastomer Olefinic Resin 20 Ti-Eco Light WS type Ti-Eco Light WS type is right-handed. Excels in abrasion resistance by use of special elastomer at hose soft part. Abrasion resistance: About 5 times more (Compared to our PVC Tiflex hose WS type. By test result performed at normal temperature) Special Elastomer Olefinic Resin Reinforced Cord Eco-friendly hose due to nonuse of chlorine and plasticizer. (Can be Good incinerated) flexibility and lightweight make it easy to be handled. Excels in pressure resistance due to containing reinforcement fiber. Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act. (except fat and oil) Conveying of food. (except fat and oil) Conveying cleaning water in an atomic power plant. For general draining. (delivery/suction) Sizes and properties (ELWS- ) ± ± ± ± [5.1] 101.6± [5.1] [5.1] 0.50 [5.1] [5.1] 90 Deformation Temp. (at -0.1MPa) ( )

40 Ti-Eco Light GL-V type *NEW PRODUCT* Custom-Made Product Easy to transport and piping because the hose is ultralight and excels in flexibility and stretchability. (Mass: About 1/2 by φ300 compared to our PVC GL type, Stretch rate: 1/2 or low) Easy cutting makes easy adjustment of Sizes and properties (GL-V- ) hose length. Eco-friendly hose due to nonuse of chlorine and plasticizer. (Can be KPa or less incinerated) Duct for dust collection, exhaust air ± ± and smoke exhaust system ± Other general flue duct. 50 Allowable Reduced KPa or less ± ± ± Olefinic Resin Special Film ± Ti-Eco Light GL type Resistant to repeated bending. Lightweight and excels in flexibility. (About 40% lighter in weight than our current PVC products.) Eco-friendly hose due to nonuse of chlorine and plasticizer. Complies with Standard of Apparatus, Containers and Packaging based on Japanese Ministry of Health, Labour and Welfare Notification No.201, Food Sanitation Act. (except fat and oil) Duct for general air induction and exhaust. Duct for exhaust ventilation for general industrial machinery. Duct for air conditioning. Sizes and properties (ELGL- ) ± ± ± ± ± ± ± is custom-made product [0.6] ± [0.4] [0.4] 14.5 Exclusive cuffs are also available (Other than φ175 and φ200) [-300] 0.06 [0.6] [-300] 0.05 [0.5] 0.03 [0.3] 0.03 [0.3] [-300] [-150] [-150] [0.2] [-90] [-113] [-113] 152.4± [0.2] [-75] ± ± Allowable Reduced KPa or less/ [mmhg or less] 0.02 [0.2] -8.0 [-60] Special Elastomer Olefinic Resin [0.1] -6.0 [-45]

41 Other s s developed for special applications. 42

42 Tiflex NH-1 type Air-conditioning branch pipe of largescale architectural structure. Various types of air-conditioning branch pipe. Excels in stretchability, bending, and also heat resistance. Able to improve the working efficiency, reduce the transportation cost significantly and save the inventory space because it excels in durability and can be contacted to 1/4 in length. Light in weight and excels in noise reduction and condensation prevention performance by use of special flame retardant fabric as liner material. Qualified product as MLIT noncombustible material (Ministry of Land, Infrastructure, Transport and Tourism). No. NM-0601 Air-conditioning duct hose which is a qualified product of MLIT noncombustible material. Sizes and properties (NH1- ) Dia. (φ) 90 Degrees Minimum Please refer to P56 for pressure loss data. Please consult us for lengths other than those mentioned above ,050 Glass wool Polypropylene tube Product 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Special nonwoven fabric Galvanized steel plate Industrial Cleaner Easy to bend and flexible. Excels in durability compared with rubber hose. Excels in weather resistance. Endowed with antistatic effect by use of grounding wire. (KCH- ) Grounding wire Integral molding cuff Cuff Soft PVC Hard steel wire (core) Soft PVC Sizes and properties Dia. (φ) Cuff ±

43 Hinet Excellent transparency making it possible to confirm the contents. No elongation observed under pressure due to warp reinforcement. Excels in cold resistance, heat resistance, and chemical resistance. Flexible PVC (Transparent) Strong Tetron Yarn Water supplying and draining for equipments. For piping and drain hose of pneumatic/air-conditioning equipment. For washing of ship, vehicle and etc. For conveying of powders, grains, chemicals and etc. For sprayer For civil engineering and construction. (Please consult us on hoses for special usage such as shower hoses and etc.) Sizes and properties (HINET- ) Dia. (φ) x Temperature dependence of breaking pressure , Breaking (MPa) Water Temperature ( ) 44

44 Fitting Method with Duct s Put a hose directly in fitted hose or use cuffs. In case that outer diameter of a fitted hose is larger than inner diameter of a hose, a cuff must be used because diameter of the hose cannot be expanded. Use spiral wire band when not use a cuff. Wire band and ABA band is also applicable when use a cuff. Cuff for Tiflex GL type, GL-E type, and GL-ST type Cuff Sizes Dia. (φ) L A B T φc Material Color: Gray Soft Polyvinyl Chloride Synthetic Rubber (EPDM) Cuff for Tiflex N type φ16~φ32 Sizes Dia. (φ) L A B T φc Material Structure (φ16~φ32) φ38~φ300 Structure (φ38~φ300) Soft Polyvinyl Chloride Synthetic Rubber (EPDM: Gray) Synthetic Rubber (EPDM: Black) 45

45 Cuff for Tiflex P type, P-2 type & Flame Retardant P type Cuff Sizes Dia. (φ) L A B T φc Material P type P-2 type Flame Retardant P type Color: P type (dark brown), P-2 type (white), Flame Retardant P type (black) Synthetic Rubber (P type, P-2 type: EPDM) (Flame Retardant P type: CR) End Cuff for Tiflex A type End Cuff Sizes Dia. (φ) φa φb C D Material Color: Black Soft Polyvinyl Chloride 46

46 Connector for Heat Resistant Structure (For φ100~φ300) Different Type Pipe Joint For φ100~φ300 Sizes Diameter (φ) φd φd L Different Type Pipe Material Galvanized Steel Sheet and Stainless Sheet SUS304 Also available for general duct hose Nipple Nipple Sizes Diameter (φ) φd1 L Material Structure SUS Galvanized Steel Sheet and Stainless Sheet SUS304 Also available for general Tiflex duct hose 47

47 Fitting Method of Metal Fixture R-Power Band Tightening R-Power Band Tightening & Welding Please specify the metal fixture such as < Joint Sleeves with JIS 5kgf / 10kgf Flange, Couplers with S / M shape collar for Victaulic Couplings, or etc.> Tigers Polymer Corporation shall not be liable for any accidents caused by fall-off and etc. of the fixture in the case of fixtures fitted by any party other than us. Thorough care should be observed when fitting at work sites. Fitting at work site is possible by cutting long lengths. Inner Coupler Expansion type Type with steel rods for welding to prevent from sudden fall-off of fixture caused by hammering pressure Outer Socket Caulking type Free of concern of fall-off of fixture by mechanical caulking of coupler and socket. Also, the outer surface of the fixture is free of projections making handling safe and easy. Example of Metal Fixture Fitting (1) (2) (3) (4) (5) (6) Coupler with S shape collar for inner coupler expansion + spring socket Coupler with S shape collar for outer socket caulking + socket Coupler with S shape collar for inner coupler expansion + socket Coupler with S shape collar + R-power band 2 pieces tightening + steel rods welding M-1 metal fixture + Punch band 2 pieces tightening Coupler with S shape collar + R-power band 2 pieces tightening 48

48 Couplers with G Shape Collar for Victaulic Couplers with S Shape Collar for Victaulic Joint Sleeves with Flange Threaded Nipples (M-1 Metal Fixture) Quick-Acting Couplers with Locking Lever / Adapters Quick-Acting Couplers / Adapters (633CT/633ET) Spiral Wire Double Bolt Clamps (R-Power Band) For right-handed Spiral Wire Double Bolt Clamps (L-Power Band) For left-handed hose Metal Plate Clamps (Expamet Band) Metal Plate Clamps (Punch Band) Metal Plate Bolt Clamps (ABA Band) Spiral Wire Bolt Clamps (LS Band) Wire Bolt Clamps (Wire Band) 49

49 Standard Combination Table of Fixture and Clamp Surface State of Sleeve Part Fixture and Clamp (Tightening Method) WRIS New WR FC WS FF F-3 WT WA Antistatic W E, Abrasion Resistant E Food Grade, Oil Resistant F Applicable Size Inner Coupler Expansion (With Spring Socket) φ100 or more For WS, φ250 or more Inner duct expansion is not available for WRφ125 Inner Coupler Expansion φ75 or less Outer Socket Caulking φ38~φ200 φ100 or more for F-3 Ribbed Surface Jagged Surface R-Power Band L-Power Band SY Band LS Band ABA Band Punch Band Expamet Band Punch Band (with reinforcing coil) Expamet Band Punch Band Expamet Band Punch Band (with reinforcing coil) Expamet Band for right-handed sizes of WT for left-handed sizes of WT φ100 or less for right-handed sizes of WT φ100 or less for left-handed sizes of WT φ50 or less φ75 or less φ75 or less φ100 or more φ100 or more : Usable with working pressure for each applicable hose : Usable with 70 percent or less of working pressure for each applicable hose Note) This table specifies the combinations in case of using our standard couplers with S shape collar or joint sleeves with JIS flange. In case that the other commercially available metal fixtures are used, please consult us in advance because there might be a case that a hose can not be used with its working pressure or the metal fixture can not be fitted to a hose. 50

50 Metal Fixture for Fitting (Dimension Table) Joint Sleeves with JIS Flange Couplers with S shape collar for Victaulic Couplings Threaded Nipples (M-1 Metal Fixture) Sizes Sizes Sizes 5kgf Flange Quick-Acting Couplers with Locking Lever / Adapters Sizes Sizes VN Connect Type Sleeve (Male) Less than 75 Less than 75 Size d h a VN Size A B 10kgf Flange D1 D L D2 L Size A B D Size T A B C E D1 D2 D3 6 R1/ R3/ R1/ R3/ R R1-1/ R1-1/ R R2-1/ R R Size d h h1 MN MN Connect Type Sleeve (Female) h L 51

51 Spiral Wire Double Bolt Clamps R-Power Band (for right-handed hose) Range of use Sizes Item No. RP-75 RP-90 RP-100 RP-115 RP-125 RP-150 RP-200 RP-250 Range of Use RP RP-50M RP W φd RP WR 9 WS, WR 9 Applicable WT, WA, WS, WR Applicable Size (φ) 38 WT, WA, WS, WR 50 WT, WA, WS, WR WT, WA 90 WT, WA, WS, WR WT, WA, WS, WR 125 WT, WA, WS, WR WT, WA, WS, WR WS, WR 300 L-Power Band (for left-handed hose) Sizes Item No. LP LP-50 LP-65 LP-75 LP-90 LP-100 LP-150 LP-250 Range of Use W φd LP LP Applicable Antistatic W 60 7 Antistatic W Applicable Size (φ) Antistatic W 100 WT 115 LP LP

52 Spiral Wire Bolt Clamps LS Band (for left-handed hose) Range of use Sizes Item No. LS-37 LS-62 LS LS-81 LS-88 LS LS LS LS-121 LS-131 LS-157 LS LS-266 LS LS-318 O/R: Oil Resistant (for hose without cuff) Range of Use LS LS Antistatic W, N Antistatic W WT GL, N, GL-2, O/R GL, GL-E LS GL, N LS GL, N, O/R GL Antistatic W GL, N GL, N Antistatic W GL, N, GL-2, O/R GL, GL-E Antistatic W Item Name Size Item Name GL, N 32 LS Antistatic W LS Antistatic W 60 GL, N, GL-2, O/R GL, GL-E Antistatic W GL GL WT 115 GL, N, GL-2, O/R GL, GL-E Applicable Antistatic W 32 GL, N, GL-2, O/R GL, GL-E 45 WT, Antistatic W GL, N Size GL, N, GL-2, O/R GL, GL-E Item Name Size GL, N, GL-2, O/R GL, GL-E 65 SY Band (for right-handed hose) Range of use Sizes Item No. SY-37 SY-42 SY-46 SY SY-62 SY-71 SY SY SY Abrasion Resistant GL Abrasion Resistant GL WT, WA, WS SY WT SY-110 Range of Use Item Name WS, Abrasion Resistant GL (φ38) WT, WA, WS WT, Abrasion Resistant GL WS, WA Use SRB-220 band for Abrasion Resistant GL type (φ200). Applicable WT SY WT, WA, WS SY Size WT, WA, WS 65 Abrasion Resistant GL SY Abrasion Resistant GL 125 SY SY SY SY SY SY SY Abrasion Resistant GL

53 Metal Plate Bolt Clamps ABA Band Note: The sizes of applicable hose and cuff are indicated as a rough guide in case that nipple of which OD is nearly equal to ID of the hose and cuff is inserted. In case of using a nipple of which OD is larger than ID of the hose and cuff, this clamp might be unable to use. Please consult us in such case. Wire Bolt Clamps Wire Band (For hose with cuff) Sizes Sizes Size Item No. 8-6 Cuff Size of Applicable Duct Range of Use Cuff Size of Applicable Duct FF Food Grade F, O/R F Name 300 V type Size F-3 FF Size V type Applicable Item Name Size FF, F E, Food Grade F, O/R F 65 V type F Range of Use FF, E, Food Grade F, O/R F 38 FF 19 FF, F-3 25 Food Grade F, O/R F E, Food Grade F, O/R F E, Food Grade F, O/R F V, FF, F-3, E, Food Grade F, O/R F V type 75 V type 90 V type 100 V type 125 V type V type 175 V type V type Range of Use Applicable 50 O/R: Oil Resistant Cuff Size of Applicable Duct Name 25 FF, F FF, F-3 45 E Item Name E 48.6 F FF 50 E E, Food Grade F, O/R F 50 O/R: Oil Resistant Size Applicable E Size 45 54

54 Chemical Resistance Guide This table is based on immersion test <our test data> in chemicals for each item (by using pressed sheet), documents, and other company data (rubber hose manufacturers'). Therefore, this is based on the data under static conditions and a phenomenon (material change) might be different from that under the circumstances of actual use. Please consult us after confirming detailed use conditions. A B C D Tiflex / FF, F3, WT, Antistatic W, E, Food Grade F, Hinet Tiflex / GL, N, GL-2 Tiflex / WS, FC Tiflex / WA Tiflex / WR, WR-S Tiflex / Abrasion Resistant E Resistant properties against each fluid (chemical) are as follows: = Hardly affected = Considerably affected (might be used according to conditions) = Unsuitable Unless otherwise noted, concentration of water solution is saturate and it is at normal temperature. Large Classification Small Classification Oil, Solvent, Chemicals {Concentration %} A B C D Acid Alkali 亜硫酸 (10%) Sulfurous Acid 塩化水素 ( 無水 ) Hydrogen Chloride (Anhydrous) 塩酸 (10%) Hydrochloric Acid (10%) 塩酸 (20%) Hydrochloric Acid (20%) 塩酸 (Conc) Hydrochloric Acid (Conc.) 過酸化水素 (3%) Hydrogen Peroxide (3%) 過酸化水素 (30%) Hydrogen Peroxide (30%) 過酸化水素 (80% 以上 ) Hydrogen Peroxide (80% or more) クロム酸 ( メッキ液 ) Chromic Acid Plating Solution (25%) 酢酸 Acetic Acid (10%) シュウ酸 Oxalic Acid 硝酸 (5%) Nitric Acid (5%) 硝酸 (50%) Nitric Acid (50%) 硝酸 (70%) Nitric Acid (70%) 硝酸 (95%) Nitric Acid (95%) 炭酸 Carbonic Acid 硫酸 (10%) Sulfuric Acid (10%) リン酸 (30%) Phosphoric Acid (10%) アンモニア水 ( 水酸化アンモニウム ) Ammonia Aqueous (Ammonium Hydroxide) アンモニア ( ガス ) Ammonia (Gas) アンモニア ( 液体 ) Ammonia (Liquid) 次亜塩素酸カルシウム (Conc) Calcium Hypochlorite (Conc) 次亜塩素酸カルシウム (15% 塩素中 ) Calcium Hypochlorite (15% in chlorine) 水酸化アルミニウム Aluminum Hydroxide 水酸化カリウム (10%) Potassium Hydroxide (10%) 水酸化カリウム (Conc) Potassium Hydroxide (Conc) 水酸化ナトリウム (10%) Sodium Hydroxide (10%) 水酸化ナトリウム (Conc) Sodium Hydroxide (Conc) 水酸化バリウム Barium Hydroxide 水酸化マグネシウム Magnesium Hydroxide 55

55 Large Classification Small Classification Oil, Solvent, Chemicals {Concentration %} A B C D Other Inorganic Chemicals 一酸化炭素 Carbon Monoxide 塩化亜鉛 Zinc Chloride 塩化アルミニウム Aluminum Chloride 塩化アンモニウム Ammonium Chloride 塩化カリウム Potassium Chloride 塩化カルシウム (Conc.) Calcium Chloride (Conc.) 塩化カルシウム ( メタノール中 20%) Calcium Chloride (20% in methanol) 塩化鉄 Ferrous Chloride 塩化銅 Copper Chloride 塩化ナトリウム Sodium Chloride 塩化バリウム Barium Chloride 塩化マグネシウム Magnesium Chloride 塩素 (10% ガス ) Chlorine (10% Gas) 塩素 (100% ガス ) Chlorine (100% Gas) 塩素 ( 水溶液 ) Chlorine (Aqueous Solution) オゾン Ozone 過マンガン酸カリウム Potassium Permanganate クエン酸 Citric Acid 酢酸アルミニウム Aluminum Acetate 酢酸アンモニウム (Conc.) Ammonium Acetate (Conc.) シアン化カリウム Potassium Cyanide 臭化カリウム Potassium Bromide 重クロム酸カリウム Potassium Dichromate 臭素 Bromine 重炭酸アンモニウム Ammonium Bicarbonate 重炭酸ナトリウム Sodium Bicarbonate 硝酸アンモニウム Ammonium Nitrate 硝酸銅 Copper Nitrate 水素 Hydrogen 炭酸ガス Carbon Dioxide 炭酸カルシウム Calcium Carbonate 炭酸マグネシウム Magnesium Carbonate 二酸化炭素 Carbon Dioxide フッ化カリウム Potassium Fluoride フッ素 Fluorine ヨウ素 Iodine 硫化水素 Hydrogen Sulfide 硫酸アルミニウム Aluminum Sulfate 硫酸鉄 Ferric Sulfate 硫酸銅 Copper Sulfate 硫酸マグネシウム Magnesium Sulfate リン酸カリウム Potassium Phosphate 感光乳剤 Emulsions 現像液 ( バイポ ) Photographic Developers 乳化剤 Emulsifiers 56

56 Large Classification Small Classification Oil, Solvent, Chemicals {Concentration %} A B C D Other Inorganic Chemicals Organic Chemicals Ketone, Ether, etc. Chlorinated Solvent Other Organic Chemicals 水 Water 塩水 Salt Water アセトン Acetone エーテル Ethers ジエチルエーテル Diethyl Ether メチルエチルケトン Methyl Ethyl Ketone 塩化エチレン Ethylene Chloride 塩化メチレン Methylene Chloride クロロホルム Chloroform 四塩化炭素 Carbon Tetrachloride ジクロロエチレン Dichloroethylene ジクロロベンゼン Dichlorobenzene パークロロエチレン Perchlorethylene モノクロロベンゼン Monochlorobenzene アニリン Aniline イソプロピルアルコール Isopropyl Alcohol エチルアルコール (6%) Ethyl Alcohol (6%) エチルアルコール (100%) Ethyl Alcohol (100%) エチレングリコール Ethylene Glycol オレイン酸 Oleic Acid グリセリン Glycerin クレオソート油 Creosote Oil 酢酸エチル Ethyl Acetate ステアリン酸 Stearic Acid セチルアルコール Cetyl Alcohol デキストリン Dextrin テトラヒドロフラン Tetrahydrofuran トルエン Toluene パラフィン Paraffin フェノール Phenol ブチルアルコール Butyl Alcohol ブドウ糖 Glucose プロピレングリコール Propylene Glycol ベンジルアルコール Benzyl Alcohol ベンゼン Benzene ホルムアルデヒド (40%) Formaldehyde (40%) メチルアルコール (6%) Methyl Alcohol (6%) メチルアルコール (100%) Methyl Alcohol (100%) 硫酸アニリン Aniline Sulfate 鉱物油 Mineral Oil 変圧器オイル Transformer Oil 酒 Liquors しょうゆ Soybean Oil ソース Sauce ビール Beer 57

57 Unit Conversion Table Pa (Pascal) bar (Atmospheric ) kgf/cm 2 atm mmh 2 O or mmaq (Water Column) mmhg or Torr (Mercury Column) Loss Graph of Duct Loss <Fluid: Gas> of Tiflex (GL, GL-2, GL-E) Air Flow Q Loss of P [Pa/ 1m] Loss <Fluid: Gas> of Tiflex NH-1 <Fluid: Gas> Air Flow Q Loss of P [Pa/ 1m] 58

Selecting Marine Hoses

Selecting Marine Hoses Selecting Marine s https://www.westmarine.com/westadvisor/selecting-marine-s By Tom Burden, Last updated: 5/8/2018 Mind the hose! Consider what can happen when a hose goes bust. If you are lucky, it could

More information

AQUACORR S&D 5/10 ABRACORR-FRA S&D /10

AQUACORR S&D 5/10 ABRACORR-FRA S&D /10 AQUACORR S&D 5/10 STRUCTURE: SBR rubber hose with smooth black inner tube, high tenacity yarn reinforcement and embedded steel helix, corrugated, black, cloth impression, abrasion and weathering resistant

More information

General Plumbing. Section L Contents

General Plumbing. Section L Contents General Plumbing L Shields Hose Section L Contents Engine/Coolant Hose... L 484 Bilge & Drain Hose... L 48 Potable & Livewell Hose... L 486 Livewell, Sanitation, Bilge Drain & Potable Hose... L 487 AC

More information

Safe - Spirals Protection for Hydraulic hoses

Safe - Spirals Protection for Hydraulic hoses Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime

More information

Safe - Spirals Protection for Hydraulic hoses

Safe - Spirals Protection for Hydraulic hoses Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime

More information

Heavy Duty Suction Hose

Heavy Duty Suction Hose Heavy Duty Suction Hose Heavy duty suction applications in agriculture industry and construction. Suitable for the conveyance of water, slurry, sewage, some solids and granules and gases. and alkalis.

More information

Series 50. PVC THERMOMAX Hoses. Very light and flexible, abrasion resistant

Series 50. PVC THERMOMAX Hoses. Very light and flexible, abrasion resistant PVC THERMOMAX Hoses Very light and flexible, abrasion resistant Light Blue ft in. in. Pressure 50.1400 500 1/4 1/2 300 PSI 50.1600 500 3/8 5/8 300 PSI 50.1700 500 1/2 13/16 300 PSI - Ideal for air tools,

More information

HOSES PVC SUCTION SUCTION AIR & WATER FOOD & BEVERAGE PETROLEUM & GAS MATERIAL HANDLING PVC SUCTION HOSES

HOSES PVC SUCTION SUCTION AIR & WATER FOOD & BEVERAGE PETROLEUM & GAS MATERIAL HANDLING PVC SUCTION HOSES SUCTION AIR & WATER FO & BEVERAGE PETROLEUM & GAS MATERIAL HANDLING FITTINGS PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 79 AIR/WATER REINFORCEMENT: Rigid PVC Spiral. INNER TUBE: Grey Smooth

More information

inside diameter wire part no. color length I.D. after recovery gauge red Single Wall Polyolefin 2:1 Shrink Tube - Flexible

inside diameter wire part no. color length I.D. after recovery gauge red Single Wall Polyolefin 2:1 Shrink Tube - Flexible PVC 2:1 Shrink Tube Use to insulate terminals after the terminal has been crimped to the wire. Tubing remains flexible and will shrink to approximately 50% of its original size when 160 C (320 F) heat

More information

Realax hoses & tubes specification. Fitted for the purpose

Realax hoses & tubes specification. Fitted for the purpose Hoses pumps and tubes for APY, Series ISI, RP IP high and pressure RP series Realax hoses & tubes specification Hose pumps, also called peristaltic pumps, are excellent for moving a wide variety of fluids

More information

Hoses for foodstuff and drink processing. Food quality hoses

Hoses for foodstuff and drink processing. Food quality hoses Hoses for foodstuff and drink processing for various food and beverage industrial processes Oy s food quality hoses are produced on clean anodized aluminium mandrels by experienced professionals. This

More information

RTA flexible conduits

RTA flexible conduits [ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for

More information

SAFEPLAST HOSE PROTECTORS for full hose and personal protection SAFEPLAST always a safe choice!

SAFEPLAST HOSE PROTECTORS for full hose and personal protection SAFEPLAST always a safe choice! SAFEPLAST HOSE PROTECTORS for full hose and personal protection SAFEPLAST always a safe choice! www.safeplast.fi www.safeplast.fi 2 ABOUT SAFEPLAST OY Safeplast Oy was founded, and is based, in Finland.

More information

TUBING PLEASE READ. Tubing for Samplers with Peristaltic Pumps

TUBING PLEASE READ. Tubing for Samplers with Peristaltic Pumps PLEASE READ Tubing for Samplers with Peristaltic Pumps The tubing that fits inside most peristaltic sampler pumps has an ID of and an OD of 5 /8 which means the wall thickness is. Most sampler manufacturers

More information

Page: HRSO-1

Page: HRSO-1 PROJECT: LOCATION: ARCHITECT: ENGINEER: SALES ENGINEER: DATE: www.fumeavent.com info@fumeavent.com 866-794-1000 Page: HRSO-1 SPRING RETRACTABLE HOSE REEL SPECIFICATION SERIES HRS The vehicle exhaust extraction

More information

Reinforced Hoses, Ducting & Assemblies

Reinforced Hoses, Ducting & Assemblies Reinforced Hoses, Ducting & Assemblies VACUFLEX Hoses with steel wire reinforcement Type MG-V-Flex K1H-PVC K1H-PU P2A1000 Light, highly flexible PVC hose, outside rib structure, reinforced with PVCcoated

More information

Industrial Hose & Rubber Products

Industrial Hose & Rubber Products CATALOG IH-18 Industrial Hose & Rubber Products World Class Solutions INDUSTRIAL HOSE PRICE LIST - FEBRUARY 2018 We welcome you to visit our 100,000 square foot facilities in Elk Grove Village, IL. RUBBER

More information

CARE, HANDLING & MAINTENANCE FOR ATTACK HOSE, LARGE DIAMETER HOSE (LDH), & SUPPLY HOSE

CARE, HANDLING & MAINTENANCE FOR ATTACK HOSE, LARGE DIAMETER HOSE (LDH), & SUPPLY HOSE CARE, HANDLING & MAINTENANCE FOR ATTACK HOSE, LARGE DIAMETER HOSE (LDH), & SUPPLY HOSE North American Fire Hose Corporation is committed to providing the highest quality raw materials, unique design features,

More information

Industrial Vacuum Accessories

Industrial Vacuum Accessories Industrial Vacuum ccessories 11 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Nilfisk Industrial Vacuum ccessory Catalog This catalog highlights the most popular Nilfisk

More information

The Contractor s Choice / America s Choice Corporate: (800) Fax: (201)

The Contractor s Choice / America s Choice Corporate: (800) Fax: (201) The Contractor s Choice / America s Choice Corporate: (800) 503-9805 Fax: (201) 964-9030 www.elgenmfg.com MISSION STATEMENT Striving to become the #1 single source solutions provider, serving sheet metal

More information

CBO-750 ASSEMBLY INSTRUCTIONS

CBO-750 ASSEMBLY INSTRUCTIONS CBO-750 ASSEMBLY INSTRUCTIONS CBO-750 Ovens Should be Installed by a Professional or Suitably-Qualified Individual. Support Base The CBO-750 Oven Support Base must: be constructed of masonry or metal have

More information

Industrial Fluid Systems

Industrial Fluid Systems Industrial Fluid Systems Whatever your production and maintenance requirements, we offer the most competitive solutions. Trelleborg Industrial Hose, with its experience and know-how, gives you the most

More information

BRANDON PIZZA OVEN INSTALLATION GUIDE AND OWNER S MANUAL

BRANDON PIZZA OVEN INSTALLATION GUIDE AND OWNER S MANUAL BRANDON PIZZA OVEN INSTALLATION GUIDE AND OWNER S MANUAL TABLE OF CONTENTS COMPONENTS... 3 OVERALL DIMENSIONS.... 4 POSITIONING REFERENCE PER LAYER... 5 CONCRETE PAD PREPARATION... 5 INSTALLATION OF BLOCKS...

More information

FLEXIBLE HOSES AND CONNECTIONS

FLEXIBLE HOSES AND CONNECTIONS FLEXIBLE HOSES AND CONNECTIONS Product group 9 Flexible hoses and connections Download catalogue FLEXIBLE HOSES PUR 0.4mm 0.7mm 62 09010062 09020062 82 09010082 09020082 102 09010102 09020102 122 09010122

More information

Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001

Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001 QUALITY MANAGEMENT SYSTEM CERTIFIED HEALTH & SAFETY MANAGEMENT SYSTEM Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING ISO 9001:2008 REGISTERED COMPANY EN ISO 10380 PRODUCED AND TESTED OHSAS 18001

More information

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight

More information

Installation and Maintenance Manual

Installation and Maintenance Manual Freestanding Gas Stove MODEL: PGS2005 GPEBB20R GPEBW20R Installation and Maintenance Manual Warning Maintenance products should be carried out by professional and technical personnel with relevant qualification,

More information

Knives, Cutters & Scrapers

Knives, Cutters & Scrapers Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel

More information

CUSTOM HOSE FABRICATION

CUSTOM HOSE FABRICATION INNOVATIVE SOLUTIONS IN CUSTOM HOSE FABRICATION AN ISO 9001:2000 COMPANY Designs to Meet Any Requirement At MFC, we work closely with our customers to develop the best products for their specific applications.

More information

Metal & Teflon Lined Hose

Metal & Teflon Lined Hose May 2001 Metal & Teflon Lined Hose Components & Controls, Inc. 493 Washington Avenue Carlstadt, NJ 07072 201-438-9190 212-564-5541 Fax: 201-438-3356 www.componentsandcontrols.com Components & Controls,

More information

Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance

Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:

More information

SOUDATHERM SFI 600P. Revision date: 19/06/2015 Page 1 of 6

SOUDATHERM SFI 600P. Revision date: 19/06/2015 Page 1 of 6 Revision date: 19/06/2015 Page 1 of 6 Technical data: Basis Polyurethane Foam Consistency Liquid Curing system Moisture curing Skin formation (20 C and 60% R.H.)* 8 min Curing time (20 C and 60% R.H.)*

More information

Slit Loom Installation Tool. Spools and Bags. Bulk Boxes

Slit Loom Installation Tool. Spools and Bags. Bulk Boxes Looms and Tubing Polyethylene Slit Loom Slit seam construction allows for easy wire insertion and repair, yet retains wire even when bent or twisted. Maximum temperature 93 C (200 F). Ideal for protecting

More information

INSTALLATION & MAINTENANCE MANUAL FOR FLUE RENOVATION SYSTEM - FitFire & Fitfireplus

INSTALLATION & MAINTENANCE MANUAL FOR FLUE RENOVATION SYSTEM - FitFire & Fitfireplus INSTALLATION & MAINTENANCE MANUAL FOR FLUE RENOVATION SYSTEM - FitFire & Fitfireplus Edition Revision Approved by Written by 1 1.2 C. Lezzi C. Lezzi Date 14/02/2011 Page 12 Code 01_01 Manuale_inst_Fitfire-plus

More information

Reinforced Hoses, Ducting & Assemblies

Reinforced Hoses, Ducting & Assemblies Reinforced Hoses, Ducting & Assemblies VACUFLEX Hoses with steel wire reinforcement Type MG-V-Flex K1H-PVC K1H-PU P2A1000 Structure Light, highly flexible PVC hose, outside rib structure, reinforced with

More information

Chip Vac Chip Vac Vacuums chips directly into an open-top drum with no moving parts! What Is The Chip Vac? Why The Chip Vac? Watch the video!

Chip Vac Chip Vac Vacuums chips directly into an open-top drum with no moving parts! What Is The Chip Vac? Why The Chip Vac? Watch the video! Chip Vac Chip Vac Vacuums chips directly into an open-top drum with no moving parts! What Is The Chip Vac? EXAIR's Chip Vac picks up dry or wet chips and delivers them directly to an ordinary open-top

More information

Synflex. Mini Catalog

Synflex. Mini Catalog Synflex Mini Catalog Table of Contents Hose Selection Chart Core 5 Hoses (Application/Product) 2 3R30, 3130, 3580, 30CT, 3R80 Core 5 Hoses (Product) 2 3R30, 3130, 3580, 30CT, 3R80 Hose 3R30 Low Pressure

More information

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit

More information

INSTALLATION AND OPERATION GUIDE FOR

INSTALLATION AND OPERATION GUIDE FOR INSTALLATION AND OPERATION GUIDE FOR Featuring Aquatic Glassel Tempered, Formulated Glass, 2005-2007 NATURAL GAS INSTRUCTIONS Adequate Fireplace Ventilation is Required NOTE: READ INSTRUCTIONS FULLY BEFORE

More information

Metallic & PTFE Hose and Couplings

Metallic & PTFE Hose and Couplings Metallic & PTFE Hose and Couplings Quality Hose and Couplings Company Profile Based in the heart of industrial Lancashire and close to the motorway network, Proflex Hose provides a complete flow solutions

More information

SPECIALITY HOSES EXCELLENCE PRODUCT CATALOGUE

SPECIALITY HOSES EXCELLENCE PRODUCT CATALOGUE SPECIALITY HOSES EXPERIENCE EXCELLENCE PRODUCT CATALOGUE a MAKE IN INDIA initiative ABOUT US... Mitras Technocrafts Pvt. Ltd., New Delhi is an ISO 9001:2008 Certified Co. manufacturing world class brand

More information

Content. Type SIL100 Ultra-pure silicone hose 4. Type SIL200 Fabric-reinforced silicone hose 6. Type SIL300 Wire-reinforced silicone hose 8

Content. Type SIL100 Ultra-pure silicone hose 4. Type SIL200 Fabric-reinforced silicone hose 6. Type SIL300 Wire-reinforced silicone hose 8 Silicone hoses Introduction The Markert Group specialises in the development and manufacture of customised industrial hose assemblies for demanding applications. Based on our employees' many years of extensive

More information

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Available materials: Steel, powder coated, RAL7032, RAL3000 (Application

More information

OWNER'S MANUAL CAMPOUT TABLE OF CONTENTS

OWNER'S MANUAL CAMPOUT TABLE OF CONTENTS OWNER'S MANUAL CAMPOUT RV Before operating the awning, carefully review the Owner's Manual. The manual contains important safety information, detailed operating instructions, common maintenance procedures

More information

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8 Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555

More information

FOAM PROPORTIONING EQUIPMENT

FOAM PROPORTIONING EQUIPMENT 10 VERTICAL & HORIZONTAL BLADDER TANKS DESCRIPTION All valves are labeled showing normal working position. Buckeye Bladder Tanks store foam concentrate and are one component of a Balanced Pressure Foam

More information

HOSE ASSEMBLY CLEANLINESS

HOSE ASSEMBLY CLEANLINESS November 18, 2002 HOSE ASSEMBLY CLEANLINESS Preface Hydraulic system cleanliness is a term used to describe the level of solid and liquid contamination found in hydraulic systems. Contamination may be

More information

GO THE DISTANCE WITH GATES EXTRA SERVICE SYSTEMS SOLUTIONS

GO THE DISTANCE WITH GATES EXTRA SERVICE SYSTEMS SOLUTIONS E2/70264 AIR SYSTEMS FUEL SYSTEMS GO THE DISTANCE WITH GATES EXTRA SERVICE SYSTEMS SOLUTIONS Unexpected breakdowns cause a considerable loss of time and high costs. In order to avoid unwanted delays, spare

More information

NORMACLAMP Hose Clamps

NORMACLAMP Hose Clamps NORMACLAMP NORMACLAMP NORMACLAMP S/SP Sealing clamps (NORMACLAMP S) to DIN 3017, Retaining clamps (NORMACLAMP SP) to DIN 3016 Thanks to their robust clamping brackets with metric bolts the clamping force

More information

Meat Slicer INSTRUCTION MANUAL CAUTION! ONE YEAR LIMITED WARRANTY

Meat Slicer INSTRUCTION MANUAL CAUTION! ONE YEAR LIMITED WARRANTY ONE YEAR LIMITED WARRANTY INSTRUCTION MANUAL The original registered owner of this product should contact SKYFOOD EQUIPMENT LLC at 305-868-16 for any warranty problems or service. SKYFOOD EQUIPMENT LLC

More information

PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS

PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS EARL S PRO LITE 350 HOSE IS ONE OF THE LIGHTEST AND MOST DURABLE HOSES AVAILABLE ON THE MARKET TODAY! Serious racers and street

More information

4 Storage cupboards SCALA

4 Storage cupboards SCALA Our SCALA laboratory furniture system provides a vast selection of storage variants for fast access and safe storage. All storage cupboards can be variably equipped and provide optimum space utilisation

More information

SB3T. Roll-InBuddy + Tilt. Dignity + Ease + Comfort. Product features include:

SB3T. Roll-InBuddy + Tilt. Dignity + Ease + Comfort. Product features include: SB3T Roll-InBuddy + Tilt The revolutionary tilt option incorporated into the Roll-InBuddy Tilt allows for pressure release as well as a more thorough bathing experience for the user and easier reach for

More information

DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE

DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE DURABLE LIGHTWEIGHT TABLES ABS RECTANGLE MityLite sets the market standard for durability with our lightweight ABS Folding Tables. Proprietary construction ensures edge and corner strength while the table

More information

Municipal Fire Hose Catalog

Municipal Fire Hose Catalog Municipal Fire Hose Catalog Serving America s Best for over 50 years. ATI s Most Advanced Structural Firefighting Attack Line Resists burn-through for a full minute* Perfect fit of outer jacket and inner

More information

HANDWHEELS.

HANDWHEELS. HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...

More information

7. Do not dispose of the packaging immediately.the package insert contains a template for mounting the slide bar A/Rev01 G1/2" G1/2" G1/2"

7. Do not dispose of the packaging immediately.the package insert contains a template for mounting the slide bar A/Rev01 G1/2 G1/2 G1/2 INSTALLATION INSTRUCTIONS Magnetic Slide Shower 550 552 BEFORE YOU BEGIN MAGNETIC SLIDE SHOWER All information is based on the latest product information available at the time of publication. Kohler Co.

More information

Sale ends September 30 th, Store hours 7:30-4:30 M-F

Sale ends September 30 th, Store hours 7:30-4:30 M-F Sale ends September 30 th, 2018 Store hours 7:30-4:30 M-F 1819 North 13 th St Toledo, OH 43604 (p) 419-243-9144 (f) 419-243-9696 Irwin 18 Cast Iron Pipe Wrench Non-clogging can empties contents completely

More information

TRANSFER OIL. thermoplastic and ptfe hoses fittings and assemblies

TRANSFER OIL. thermoplastic and ptfe hoses fittings and assemblies Scope Thermoplastic Sewer Cleaning Hose Factors of Hose Service Life Transfer Oil sewer cleaning hoses are purpose designed for aggressive sewer cleaning applications. The hose is designed and constructed

More information

MADRAS ASBESTOS STORES

MADRAS ASBESTOS STORES MADRAS ASBESTOS STORES Our Brands Ceramic Products Asbestos Products ASIAN ASBESTOS PRODUCTS Asbestos Ropes Graphite Packing Asbestos Millboard We are offering a comprehensive range of ASIAN Asbestos Products.

More information

User Manual. 110 Cup (55 Cup Raw) Rice Cooker. Model: 177GRCLP, 177GRCNAT 10/2017. Please read and keep these instructions. Indoor use only.

User Manual. 110 Cup (55 Cup Raw) Rice Cooker. Model: 177GRCLP, 177GRCNAT 10/2017. Please read and keep these instructions. Indoor use only. 110 Cup (55 Cup Raw) Rice Cooker Model: 177GRCLP, 177GRCNAT 10/2017 Please read and keep these instructions. Indoor use only. www.avantcoequipment.com 1 NOTE: Save these instructions for future reference.

More information

Operating Instructions VETTER Medical Tents

Operating Instructions VETTER Medical Tents Emergency Pneumatics. Operating Instructions VETTER Medical Tents Article No. 87043403 Vetter GmbH I 09/17 I Changes and errors excepted. Vetter Medical Tents Contents 1. Important preliminary remarks...2

More information

Synflex Assembly Equipment and Accessories

Synflex Assembly Equipment and Accessories Synflex Assembly Equipment and Accessories H1 Synflex Swaging Machines SST and Mark IX Designed to Attach Synflex Permanent Fittings to Synflex Hose Synflex swaging equipment produces smooth, uniform fitting

More information

Specifications. According to CEC Rule Please Note

Specifications. According to CEC Rule Please Note T& Fittings rmoured able and Flexible Metal onduit Fittings Specifications rmoured able (Type 90) Ref. E Rule 12-600 The anadian Electric ode 2012 Part I defines type armoured cable as, fabricated assembly

More information

APPLICATION CONSTRUCTION OPTIONS MODEL NAME TYPICAL APPLICATIONS STXB STXBW STXBHP STXBWHP STXBRHUL STXBWRHUL STXBHPRHUL STXBWHPRHUL

APPLICATION CONSTRUCTION OPTIONS MODEL NAME TYPICAL APPLICATIONS STXB STXBW STXBHP STXBWHP STXBRHUL STXBWRHUL STXBHPRHUL STXBWHPRHUL S BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES Exhaust air up to 8,648 CFM in high static pressure applications up to 2-3/4 w.g. Attractive spun aluminum exterior Belt drives permit easy performance

More information

IB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility

IB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility IB 15/120 The Ice Blaster IB 15/120 is one of the most powerful dry ice blasting machines on the market. It impresses with its robustness, highly reliable technology and the best results in dry ice cleaning.

More information

Single, oversized roller compresses a low friction hose through a full 360-degree rotation

Single, oversized roller compresses a low friction hose through a full 360-degree rotation Graco EP Series Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degree rotation More flow per revolution than conventional designs One hose compression per

More information

RETRACTABLE HOSE REEL

RETRACTABLE HOSE REEL RETRACTABLE HOSE REEL 30 METRE HOSE LENGTH MODEL NO. YWRHR30A OPERATING INSTRUCTIONS INTRODUCTION - MODEL NO. YWRHR30A This reel is made of high-quality materials and parts, driven and released by a spring,

More information

Model 205 Fireview Maintenance Kit

Model 205 Fireview Maintenance Kit Model 205 Fireview Maintenance Kit Please read all of the instructions before you begin the procedure. Confirm that you have all the necessary tools and parts required. Allow about one hour to complete

More information

3. SS 4. SS 5. SS 6. SS

3. SS 4. SS 5. SS 6. SS Fry, Steam, Braise, Roast, Broil, Bake, Grill, Simmer and Saute all in one pan Unique splatter guard lid with built-in thermometer for frying Increased cooking surface due to square design Spoon rest lid

More information

Muskoka Folding Glass Wall System

Muskoka Folding Glass Wall System Muskoka Folding Glass Wall System Bringing the great outdoors in Engineered Elegance Providing comfort and convenience, the Muskoka lets you experience more of the great outdoors whenever you like. Whether

More information

MP02 series. Instruction and installation manual

MP02 series. Instruction and installation manual MP02 series Commercial water purifier (MP02-1E MP02-2E MP02-3E MP02-4E) Water softener with water purification function (MP02-5E MP02-6E) Instruction and installation manual Thank you very much for purchasing

More information

OWNER'S MANUAL AWNING EXTEND R TABLE OF CONTENTS

OWNER'S MANUAL AWNING EXTEND R TABLE OF CONTENTS OWNER'S MANUAL AWNING EXTEND R RV Before operating the awning, carefully review the Owner's Manual. The manual contains important safety information, detailed operating instructions, common maintenance

More information

Technical Information*

Technical Information* Technical Information* Technical Information 2 Technical Information Hose Construction A hose is a reinforced, flexible conduit used to move materials from one point to another or to transmit energy. It

More information

IB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display

IB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display IB 7/40 Classic Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device. 1 Automatic

More information

Integrated Process Solutions

Integrated Process Solutions Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family

More information

WE BELIEVE SAFETY SHOULD BE PAINLESS. IT SHOULD ENHANCE YOUR PERFORMANCE. IT SHOULD LOOK AND FEEL GREAT. EPIK: COMFORTABLY SAFE.

WE BELIEVE SAFETY SHOULD BE PAINLESS. IT SHOULD ENHANCE YOUR PERFORMANCE. IT SHOULD LOOK AND FEEL GREAT. EPIK: COMFORTABLY SAFE. WE BELIEVE SAFETY SHOULD BE PAINLESS. IT SHOULD ENHANCE YOUR PERFORMANCE. IT SHOULD LOOK AND FEEL GREAT. P E R F O R M A N C E S A F E T Y W O R K WEAR EPIK: COMFORTABLY SAFE. Why Epik Polyurethane Boot?

More information

Parts and Accessories for Dispenser

Parts and Accessories for Dispenser vol.3 Parts and Accessories for Dispenser Dispenser controller Adapter tube O-ring Head cap Syringe Plunger Needle cap Needle & Nozzle Syringe for dispenser Syringes Syringe full scale drawing You can

More information

Aviation Snips. Multi-Cable Cutter

Aviation Snips. Multi-Cable Cutter CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),

More information

PERFORMANCE FIREFIGHTERS DEPEND ON.

PERFORMANCE FIREFIGHTERS DEPEND ON. PERFORMANCE FIREFIGHTERS DEPEND ON. American Made Tough. BullDog Hose Company, part of Puck Custom Enterprises, is a legend in firefighting hose technology. With a commitment to firefighters that is unparalleled,

More information

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR Installation & Maintenance LISTED Tested to *UL 103HT & ULC-S641 Instructions MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR

More information

INSTANT GARAGE MODEL NO: CIG81224 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS

INSTANT GARAGE MODEL NO: CIG81224 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS INSTANT GARAGE MODEL NO: CIG81224 PART NO: 3503578 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1117 INTRODUCTION Thank you for purchasing this CLARKE Instant Garage. When erected, the CIG81224 garage

More information

Chapter 15 Test. Directions: Write the correct letter on the blank before each question.

Chapter 15 Test. Directions: Write the correct letter on the blank before each question. Chapter 15 Test Name: Date: Directions: Write the correct letter on the blank before each question. Objective 1: Explain basic fire hose characteristics. 1. What type of hose transports water or other

More information

Lit Table Top Firepit Bio-Ethanol Fireplace. User Manual. Model: GF301650

Lit Table Top Firepit Bio-Ethanol Fireplace. User Manual. Model: GF301650 Lit Table Top Firepit Bio-Ethanol Fireplace User Manual Model: GF301650 1 Moda Flame Lit Table Top Firepit Bio-Ethanol Fireplace Included in delivery (Parts List): A. Fireplace body 1pc B. Glass 1pc C.

More information

Installation Instructions

Installation Instructions Installation Instructions C 780 www.contura.eu 50 CERTIFICATE PERFORMANCE DECLARATION No. C780-CPR-130612-SE-1 PRODUCT Product type Stove lit with solid biofuels Type designation Contura 780 Manufacturing

More information

Hammer, Discus, Shot Put, Javelin

Hammer, Discus, Shot Put, Javelin Hammer, Discus, Shot Put, Javelin Competition Aluminium Discus And Hammer Cage 7/10 M Order No. 30290 Order No. 30290 D (Double Net) Order No. 30290 DS (Dismantle to fit a 20 container) Competition aluminium

More information

Inspecting your combustor

Inspecting your combustor Inspecting your combustor Ash, a fluffy light grey powder, and soot, a darker granular material, accumulate on the combustor surfaces in normal use. Ashes accumulate both as a result of the smoke being

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL

CIRRUS AIRPLANE MAINTENANCE MANUAL CABIN 1. GENERAL The aft passenger windows are manufactured of acrylic and adhesive bonded to the fuselage. Replacement is accomplished by removing the interior trim around the window, removing the sealant

More information

Smallest Connector with Removable Contacts

Smallest Connector with Removable Contacts 1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative

More information

RING VAC Convey solid materials, waste, trim, small parts with virtually no moving parts. 4Made of anodized aluminum with no moving parts. material.

RING VAC Convey solid materials, waste, trim, small parts with virtually no moving parts. 4Made of anodized aluminum with no moving parts. material. RING VC IR CONVEYOR RING VC Convey solid materials, waste, trim, small parts with virtually no moving parts WT RE TEY RESONS TO USE The Ring Vac Pneumatic Conveying System has virtually no moving parts,

More information

AND LOAD CANOPY RACK SPECIFICATIONS

AND LOAD CANOPY RACK SPECIFICATIONS 8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck

More information

OWNER'S MANUAL FREEDOM WMNL AWNING MOTORIZED OR MANUAL LATERAL ARM BOX AWNING

OWNER'S MANUAL FREEDOM WMNL AWNING MOTORIZED OR MANUAL LATERAL ARM BOX AWNING OWNER'S MANUAL FREEDOM WMNL AWNING MOTORIZED OR MANUAL LATERAL ARM BOX AWNING RV Before operating the awning, carefully review the Owner's Manual. The manual contains important safety information, detailed

More information

CHEMICAL TRANSFER HOSE

CHEMICAL TRANSFER HOSE CHEMICAL TRANSFER 6 Composite Hose manufacturing represents a radical departure from conventional hose building technologies. The unique construction method used to make composite hose results in an extremely

More information

Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool

Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)

More information

4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post

4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,

More information

Advantages Compact Quiet No moving parts Fits standard hose or tube Aluminum or stainless steel Eleven sizes High throughput capability

Advantages Compact Quiet No moving parts Fits standard hose or tube Aluminum or stainless steel Eleven sizes High throughput capability Line Vac Line Vac Convey parts, materials, waste - with no moving parts! High Conveying Rates! Ideal For Long Distance! Mounting Brackets Available! What Is The Line Vac? A fast, low cost way to convey:

More information

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE: BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential

More information

COLD ROOM DOORS. catalog

COLD ROOM DOORS. catalog log COLD ROOM DOORS catalog 2017-2018 about Quality coldroom doors designed for efficiency Igloodoors is the flagship product line of Coldroombuilder, a high-end product manufacturer for coldroom systems

More information

Couplings for Gates Hoses 7 Combination Nipple

Couplings for Gates Hoses 7 Combination Nipple Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or

More information

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR Installation & Maintenance LISTED Tested to *UL 103HT & ULC-S641 Instructions MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR

More information