ASSEMBLY INSTRUCTIONS

Size: px

Start display at page:

Download "ASSEMBLY INSTRUCTIONS"

Constance Parrish
5 years ago
Views:

1 ASSEMBLY INSTRUCTIONS NT-MG302FMS 56" TV Stand Safety information and specifications...2 Tools needed...3 Parts...3 Hardware...4 Assembly instructions...5

Safety information and specifications CAUTION: This stand s glass work surface is intended only for use with a product not weighing more than 154 lbs. (69.

2 Safety information and specifications CAUTION: This stand s glass work surface is intended only for use with a product not weighing more than 154 lbs. (69.9 kg) and having and having a width that will permit it to sit evenly on the stand with no more than a one-inch overhang on each side on the top shelf. Using with other products, including products that weigh more than the maximum weight allowed or extend beyond the maximum width, may result in instability, which may cause possible injury. Caution: This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children! Do not lift the glass by the support posts. See instructions for more details. Model #: NT-MG302FMS Distributed by Best Buy Purchasing, LLC Manufacturer: Alart Inc. Manufacture Date: Maximum weight: 154 lbs. (69.9 kg) Maximum width: 1-inch overhang on each side of the top shelf Overall dimensions (W H D): " ( cm) 17" (43.18 cm) 56" ( cm) 21" (53.34 cm) 18.5" (46.99 cm) 2

3 Tools needed (For optional tipping restaint hardware only) Phillips screwdriver Drill Parts Package contents: parts A Stand body (1) B Top glass shelf (1) C Middle glass shelf (1) D Bottom glass shelf (1) 3

4 Hardware Package contents: hardware Note: You may receive extra hardware. Make sure you have all the hardware necessary to assemble your new TV stand: Label Hardware Qty. Label Hardware Qty. E Large 2 thumbscrew H Medium 2 thunbscrew I Shelf pad 11 F 2 Locking peg J Shelf lock 1 G Small 2 thumbscrew An optional anti-tipping hardware kit is included. Instructions on how to install the hardware are included on the bag containing the kit. You can use the touch-up marker to cover minor scratches after you install the kit in mm 4

5 Step 1 Assembly instructions Unfold the stand body (A), then insert the two large thumbscrews (E) into the right side of the rear panel. You ll need: E (2) 5

6 Step 2 Attach the middle support bars to the rear panel with the two small thumbscrews (G). You ll need: 6 G (2)

7 Step 3 Attach the shelf pads. You ll need: I (11) 7

8 Step 4 Insert the two locking pegs (F) into the top glass shelf (B). You ll need: F (2) 8

9 Step 5 Turn the top shelf over and align the locking pegs with the holes in the top of the rear vertical support, and align the metal pegs with holes in the side of the frame. Lock the locking pegs into place by rotating the peg heads to face the back of the stand. 9

10 Step 6 Secure the top shelf to the steel frame with the medium thumbscrews (H). You ll need: H (2) 10

11 Step 7 Install the bottom shelf (D). Tilt the shelf to fit it between the sides of the stand. Install the middle shelf (C), then lock the middle shelf into place with the T-shaped shelf lock (J). Tilt the shelf to fit it between the sides of the stand. You ll need: J (1) 11

12 Step 8 Optional: Install the anti-tipping hardware. Instructions are included in the bag containing the hardware. You need to remove the top thumbscrew, place the the tipping restraint bracket over the thumbnail screw hole, then replace the thumbscrew. You ll need: Phillips screwdriver Drill 12

13 Need to securely mount your TV to the stand? Need to mount the TV higher above the top shelf? Then look for the Init Convertible TV Mount System NT-TVFMS01 with the FMS Compatible logo, available on and in select stores beginning November Instructions for attaching the Convertible TV Mount System to this stand can be found by searching for model NT-MG302FMS on initproducts.com and looking in the section titled "Supporting Documentation. If you purchased the NT-TVFMS01 compatible TV mound, the assembly instructions are in the box. You can also visit and search for the model NT-TVFMS01. The instructions will be in the Supporting Documentation area. For customer service, call: (U.S./Canada markets) 13

14 14

15 15

www.initproducts.com Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. 2011 BBY Solutions, Inc., All Rights Reserved.

16 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN U.S.A BBY Solutions, Inc., All Rights Reserved. Init is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners ENGLISH

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS NT-MG1158 58" Glass and Metal TV Stand Safety information and specifications...2 Tools needed...3 Parts...3 Hardware...4 Assembly instructions...5 Safety information and specifications