SGM466 Cooktop. 2-3 Top Assembly, Before Rev F. 4-5 Lower Assembly, Before Rev F. 6-7 Top Assembly, Rev F to Rev. N

Size: px

Start display at page:

Download "SGM466 Cooktop. 2-3 Top Assembly, Before Rev F. 4-5 Lower Assembly, Before Rev F. 6-7 Top Assembly, Rev F to Rev. N"

Henry Patterson
5 years ago
Views:

N 10-11 Top Assembly, Rev P and Later 12-13 Lower Assembly, Rev P and Later IMPORTANT: Revision F and later SGM466 units are equipped with two

1 SGM466 Cooktop Page # Description 2-3 Top Assembly, Before Rev F 4-5 Lower Assembly, Before Rev F 6-7 Top Assembly, Rev F to Rev. N 8-9 Lower Assembly, Rev F to Rev. N Top Assembly, Rev P and Later Lower Assembly, Rev P and Later IMPORTANT: Revision F and later SGM466 units are equipped with two 14,000 BTU (D size) burners and other minor changes. Please take care when ordering parts and check the serial number so that you do not order incorrect parts or confuse newer units with older cooktops that do not have the 14,000 BTU burners. Revised

2 SGM466 - Top Assembly, Before Rev. F Page 2

3 SGM466 Top Assembly Parts, Before Rev. F ITEM PART# Description Burner Base (C) Burner Base (B) BM Burner Cap (C) BM Burner Cap (B) Gasket, Spill Protector SB 1 Grate Grate, Support Pad (set of 4) Ignitor Assy Knob with Logo Knob w/o Logo ITEM PART# Description O-Ring (C) O-Ring (B) Ring, Nut Ring, Burner (C) Ring, Burner (B) SSC Spill Protector, Center SSL Spill Protector, Left SSR Spill Protector, Right Top Frame, Black 36175S Top Frame, Stainless 1 The grates have been redesigned. You may need to replace all three grates to make sure that they match. 2 IMPORTANT: The ignitor assembly and burner rings were redesigned on later versions of the cooktop. The older designs are no longer available. The new ignitor design only works with the newer burner ring design, while the new burner ring design is compatible with all versions of the ignitor assembly. When replacing the ignitor assembly check to make sure the latest version of the burner ring is installed. If the burner ring has a hole on its side (see diagrams below), it must be replaced with correct size (B or C) of the newer version. Items 30 and 31 above list the part number for the newer versions of the burner ring. Burner Ring with Hole (old) Does not work with new version of ignitor assembly. Burner Ring without Hole (new) Works with all version of ignitor assembly. Page 3

4 SGM466 Lower Assembly, Before Rev. F Page 4

5 SGM466 Lower Assembly Parts, Before Rev. F ITEM PART# Description Bracket, Hold Down (set of 2) Bumper, Rubber (Chassis) Burner Tube (Long) Burner Tube (Short) Channel Support Chassis Box Cord Assy Heat Shield Insulation Heat Shield (2 Pcs.) Insulation, Module Manifold w/o Valves Manifold Bracket Spark Module Assy Regulator Screw ITEM PART# Description Air Shutter (Large) Air Shutter (Medium) Switch, Micro (Ignition) Valve (Large LP) Valve (Large LP, Remote) Valve (Large Nat) Valve (Large Nat, Remote) Valve (Medium LP) Valve (Medium LP, Remote) Valve (Medium Nat) Valve (Medium Nat, Remote) Wire Harness, Ignitors 51 - Gas Tube 52 - Shutter Page 5

6 SGM466 Top Assembly, Rev. F to Rev. N Page 6

7 SGM466 Top Assembly Parts, Rev. F to Rev. N Item Part # Description SB Burner Cap (D) Burner Ring (D) Assy, Burner Head (D) O-Ring, Head (D) SB Burner Cap (C) Burner Ring (C) Assy, Burner Head (C) O-Ring, Head (C) SB Burner Cap (B) Burner Ring (B) Assy, Burner Head (B) O-Ring, Head (B) Assy, Ignitor Kit 1 Item Part # Description Ring Nut SB 2 Grate Pack, Side with Caps and Pads SB 2 Grate Pack, Center with Caps and Pads Grate Support Pad (set of 4) Gasket, Spill Protector SSL Spill Protector, Left SSC Spill Protector, Center SSR Spill Protector, Right Knob Knob with Logo 36423S Top Frame, Stainless BP Top Frame, Black 36420RP Top Frame, Arctic 1 IMPORTANT: The ignitor assembly and burner rings were redesigned on later versions of the cooktop. The older designs are no longer available. The new ignitor design only works with the newer burner ring design, while the new burner ring design is compatible with all versions of the ignitor assembly. When replacing the ignitor assembly check to make sure the latest version of the burner ring is installed. If the burner ring has a hole on its side (see diagrams below), it must be replaced with correct size (B, C or D) of the newer version. Items 2, 6 and 10 above list the part number for the newer versions of the burner ring. 2 Effective with revision G of the cooktop, the grates were redesigned. On cooktops manufactured before revision G, all three grates may need to be replaced to make sure they match. Burner Ring with Hole (old) Does not work with new version of ignitor assembly. Burner Ring without Hole (new) Works with all version of ignitor assembly. Page 7

8 SGM466 Lower Assembly, Rev. F to Rev. N Page 8

9 SGM466 Lower Assembly Parts, Rev. F to Rev. N Item NG Part # NGH Part# LP Part # LPH Part# Description Valve, Remote Orifice (B), Rev N and earlier units Valve, Remote Orifice (C), Rev N and earlier units Valve (B), Rev N and earlier units Valve, Remote Orifice (D), Rev N and earlier units Valve (D), Rev N and earlier units Manifold w/o Valves Regulator Wire Harness Burner Channel Support Burner Tube, Base (LR, LF, CR, CF) Burner Tube, w/ Shutter (LR) Burner Tube, w/ Shutter (CR) Burner Tube, w/ Shutter (LF) Burner Tube, w/ Shutter (CF) Burner Tube (RR, RF) Spark Module Power Supply Cord Air Shutter, C and D (not shown) Air Shutter, B (not shown) Switch, Ignition (not shown) NG Part # NGH Part# LP Part # LPH Part# Description Manifold, Complete, Rev N and earlier units (not shown) Page 9

10 SGM466 Top Assembly, Rev. P and Later Page 10

11 SGM466 Top Assembly Parts, Rev. P and Later Item Part # Description SB Burner Cap (D) Burner Ring (D) Assy, Burner Head (D) O-Ring, Head (D) SB Burner Cap (C) Burner Ring (C) Assy, Burner Head (C) O-Ring, Head (C) SB Burner Cap (B) Burner Ring (B) Assy, Burner Head (B) O-Ring, Head (B) Assy, Ignitor Kit Item Part # Description Ring Nut SB Grate Pack, Side with Caps and Pads SB Grate Pack, Center with Caps and Pads Grate Support Pad (set of 4) Gasket, Spill Protector SSL Spill Protector, Left SSC Spill Protector, Center SSR Spill Protector, Right Knob Knob with Logo 36423S Top Frame, Stainless BP Top Frame, Black 36420RP Top Frame, Arctic Page 11

12 SGM466 Lower Assembly, Rev. P and Later Page 12

13 SGM466 Lower Assembly Parts, Rev. P and Later Item NG Part # NGH Part# LP Part # LPH Part# Description Valve (B), Rev P and later units Valve (C), Rev P and later units Valve (B), Rev P and later units Valve (D), Rev P and later units Valve (D), Rev P and later units Manifold with Valves Regulator Wire Harness Burner Channel Support Burner Tube, Assy (RF) Burner Tube, Assy (LR) Burner Tube, Assy (CR) Burner Tube, Assy (LF) Burner Tube, Assy (CF) Burner Tube, Assy (RR) Spark Module Power Supply Cord Air Shutter, C and D (not shown) Air Shutter, B (not shown) Switch, Ignition (not shown) Page 13

PGM365 Cooktop. 2-3 Chassis Assembly* 4 Burner Tubes* 5-6 Top Frame Assembly. 7 Wiring and Lights

PGM365 Cooktop. 2-3 Chassis Assembly* 4 Burner Tubes* 5-6 Top Frame Assembly. 7 Wiring and Lights PGM365 Cooktop IMPORTANT: PGM series cooktops that do not have a -1 at the end of the model number may have some parts that are No Longer Available (NLA). If the part you need is no longer available, please