Assembly Instructions: Square Tile Fire Pit With Embossed Side Panels

Size: px

Start display at page:

Download "Assembly Instructions: Square Tile Fire Pit With Embossed Side Panels"

Bernard Lindsey
5 years ago
Views:

Drawings Part # A Mantle Frame 1 8-07-00158-01-055 B Side

Square Bowl 1 8-09-00018-01-055 E Log Grate 1

Tile Piece 4 3-19-00017-09-000 H Rectangular Tile Piece 8

1 Assembly Instructions: Square Tile Fire Pit With Embossed Side Panels FT501PTESMLID Part List Part List Description Qty. Drawings Part # A Mantle Frame B Side Panel C Corner Post D Square Bowl E Log Grate F Mesh Lid G Square Tile Piece H Rectangular Tile Piece I Lid Ring J Bolt (M6x12mm)

K Poker 1 3-06-00013-47-055 L Allen Wrench (M4) 1 3-06-00009-01-000 M Plastic Cap (Pre-installed) 4 1-04-00024-07-055 Tool required: Allen Wrench (provided) Special Warnings This fire pit is intended

2 K Poker L Allen Wrench (M4) M Plastic Cap (Pre-installed) Tool required: Allen Wrench (provided) Special Warnings This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks. This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves or other combustible materials in the fire pit. NOT for use by children. Keep children and pets away from the fire pit. Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands. NEVER leave burning fire pit unattended and always extinguish fire completely before leaving the fire pit. Maintain a minimum of 5 FT from any structure! DO NOT use near flammable or combustible objects or materials. Use on a temperature safe surface. LOG GRATE is NOT intended for cooking and SHOULD NOT be used for this purpose. DO NOT move fire pit when in use Operation Instructions Place wood logs on grate and light with match. DO NOT overload logs. Please use Poker (provided) when handling. We do not recommend pouring water over the fire unless necessary. The fire should be allowed to expire on its own. Ceramic Tiles, Slate and Granite are fragile so handle with care. (for items with ceramic tiles, slate or granite) Care and Maintenance This fire pit is a quality-built product and is made to last for many years. The frame structure of this unit is made of powder-coated steel extrusion and should resist rusting under normal use. Should rusting occur, we suggest using a steel brush on the affected area followed by a spray coating of high temperature anti-rust paint. For additional rust proofing of the bowl, grate and mesh lid we recommend that a coat of high temperature primer (such as rustoleum or similar brand) is applied before use.

3 You may cover the fire pit with a Protective Cover (NOT provided) when the fire pit is not in use. Ensure the fire pit has completely cooled down before using the Protective Cover. Assembly Instructions Estimated Assembly Time: 20 Minutes DO NOT over tighten hardware! Step 1. Attach the 4 Corner posts (C) to Mantle Frame (A) with Bolt (J). Finger Tighten; do not fully tighten all bolts. (View Fig 1) Step 2. Place the Mantle Frame (A) upside down on a flat smooth surface. Attach the Side Panel (B) to the Corner Posts (C) using the Bolt (J). Finger Tighten, do not fully tighten all bolts. (View Fig 2)

4 Step 3. Tighten all the bolts with the provided Allen Wrench (L) until all pieces fit together securely. Then turn the assembled fire pit over (legs down). Place the Rectangular Tile Pieces (H) and Square Tile Piece (G) into the corresponding empty slots on the mantle frame (A). (view Fig 3) Step 4. Place Square Bowl (D) on the base, as shown then put Log Grate (E) into Square Bowl (D). (View Fig 4)

For questions or warranty service DO NOT RETURN, Email or Call Axxonn s CUSTOMER SERVICE at service@axxonn.

5 Step 5. Affix Lid Ring (I) to the Mesh Lid (F) by screwing the lid ring into the upper hole of the mesh lid. Then place the mesh lid on the square bowl. (View Fig 5) Your Fire Pit is ready for use now! Please enjoy! For questions or warranty service DO NOT RETURN, or Call Axxonn s CUSTOMER SERVICE at service@axxonn.com or between 8:00AM to 4:30PM Eastern Standard Time, For Warranty Service we need you to us 1. Proof of purchase, 2. Your name, address and phone number, 3. Defective part number, 4. Item number, 5. Picture if relevant. Your request will be handled promptly. PRINTED IN CHINA (141117)

Instruction Manual. 30 Steel Fire Pit with Solid Bowl. Questions, problems, missing parts? Before returning to the store, Call Yayi Mfg.

Instruction Manual. 30 Steel Fire Pit with Solid Bowl. Questions, problems, missing parts? Before returning to the store, Call Yayi Mfg. Instruction Manual 30 Steel Fire Pit with Solid Bowl Questions, problems, missing parts? Before returning to the store, Call Yayi Mfg. at 855-600-9294 From 9:00 AM to 5:00 EST or email customercare@china-yayi.com