safety footwear TECHNICAL SPECIFICATIONS REF DUBAI MODEL DUBAI DESCRIPTION Safety Boot for Professional Use DESIGN C: Half leg boot

Size: px

Start display at page:

Download "safety footwear TECHNICAL SPECIFICATIONS REF DUBAI MODEL DUBAI DESCRIPTION Safety Boot for Professional Use DESIGN C: Half leg boot"

Margery Heath
5 years ago
Views:

1 MODEL DUBAI DESCRIPTION Safety Boot for Professional Use DESIGN C: Half leg boot CLASS I: Footwear manufactured with leather and other materials CATEGORY II DEGREE OF PROTECTION O2+CI+HI+FO SIZES 36 to 48 European UPPER Front, side, back heel and stripe of split leather high transpiration from 2,0 to 2,2mm thickness sand colour. Back heel of high strength polyamide resistant to abrasion and puncture. CORDURA from Invista sand colour (green or sand camouflage optional). Reinforcement stripes in the ankles of polyamide tissues sand colour. Pieces are sewed with double sand polyamide threads UPPER LINER Polyester lining fibres developed by INVISTA COOLMAX. Padded Polyamide interior tissue black colour high abrasion resistance. ZIPPER Functional side YKK zipper TONGUE OR PLEAT Closed inverted pleat with high resistance polyamide, abrasion and puncture resistance. CORDURA from Invista sand colour (green camouflage or desert camouflage optional) ADJUST Polyamide laces sand colour over antirust brass eyelets. REMOVABLE INSOLE Polyamide tissue ERGOBED grey colour over thermoforming white polyester 6 mm thickness antistatic. INSOLE 3.0 mm antistatic fabrics inner sole MIDSOLE Sand colour POLYURETHANE INJECTED DIRECTLY ONTO THE UPPER (PU) Low density foamed sand colour with high heel absorption. OUTSOLE TPU+PU (Thermoplastic Polyurethane and polyurethane) injected directly onto the upper section compact HIGH DENSITY sand colour, high resistance to abrasion, skid and cuts. TOECAP Toe cap resistant to more than 800 N compression and back heel of thermoplastic resin, both thermoformed. COMPANY CERTIFICATES EN ISO 9001 Quality Management EN ISO Environment Management APPLICABLE STANDARDS Directive 89/686/CEE, R.D. 1407/1992, O.M. 16/05/1994 and R.D. 159/1995 EN ISO Personal Protective Equipment Test methods for footwear EN ISO Footwear requirements for professional use

SOLE TRUENO ERGO-PREDATOR TPU+PU: Trueno Safety is the first Spanish footwear manufacturer, with the state of the art technology in footwear molding injection, that allows TPU+PU (Compact

2 SOLE TRUENO ERGO-PREDATOR TPU+PU: Trueno Safety is the first Spanish footwear manufacturer, with the state of the art technology in footwear molding injection, that allows TPU+PU (Compact Thermoplastic Polyurethane and Expanded polyurethane) injected directly onto the upper section. By this manufacturing system of Direct Injection onto the upper part, the sole remains molten and filtered all over the leather pores and the midsole, making a single compact piece. This system has three main advantages over other manufacturing systems. - The sole cannot be detached from the upper part, as there is no bonding material acting as agent between sole and upper. Adhesives may react or decompose facing excessive cold or heat. - Cannot be unstitched as we do not use thread to sew together the sole and the upper. Threads may burn facing flames or break by cuts or long lasting abrasions. - There is no empty gaps inside the sole, which water might fill or materials cost saving as happens in pre-manufactured soles and glued In addition, the sole is made of two layers of different density. As both layers are injected simultaneously in a semi liquid phase the bonding between layers is perfect. Bonding between layers is a chemical reaction, so there is no need of preliminary treatments, adhesives use or other textiles as bonding materials. These two layers are as follows: - Midsole: Low density foamed Polymer. Responsible of some of the following characteristics: o Cushioning. Energy absorption at heel level Comfort. E Test of normative EN ISO guarantees a suspension of more than 20J. o Insulating: Cold and heat insulation. o Excellent properties of flexibility and lightness. - Sole: High Density Compact T.P.U., responsible of the technical characteristics of the sole in contact to the ground. o Excellent Cut Resistance. o Excellent Abrasion Resistance. o Excellent skid Resistance. o Resistance to Synthetic and organic oils. o Resistance to grease, aromatic hydrocarbons and oil derivates. o Resistance to solvents, acids and alkalis. o Resistance to humidity and hydrolysis. o Resistance to many chemical products.

About the design of the new sole S9 ERGO-PREDATOR: The design of the sole SERIAL 9 ERGO-PREDATOR has been carefully treated as is has basically created for Works in sharp and rugged terrains,

3 About the design of the new sole S9 ERGO-PREDATOR: The design of the sole SERIAL 9 ERGO-PREDATOR has been carefully treated as is has basically created for Works in sharp and rugged terrains, Metallic structures and debris, slippery hills and strong down hills with the continuous presence of water, mud, snow and ice. It is also adequate for use in ladders.. - Approach angle helps the support.. - Departure angle helps the movement. - Flex angle helps the flexibility. - Edges help the walking over slopes. - Front Jigsaw helps the grip uphill. - Back jigsaw helps grip downhill. - Self-cleaning outer channels. - Cleats design helps the grip on rough terrain. - Middle area with cleats for ladder grip. - Energy absorption area in the heel. - Perfect heel height helps steps and foot comfort. - Midsole material fills all areas. - Additional support on the toe cap protects from impact and extreme abrasions. - Brand inserts TRUENO. - European size, English size and Point mode. Among all the tests from the European Normative, we can outline as key tests the following: - TPU used given the quality of hydrocarbon resistance, such as petrol, grease and all Oil derivates. This is the new test on the new version of EN ISO Heat sole resistance HI. Tested the footwear to a temperature of 150ºC during 30 minutes, the inside temperature of the user foot does not increase more than 22ºC, reducing sweat and thermal stress. - Cold sole resistance CI. The same way if footwear is tested in a temperature of 20ºC during another 30 minutes, the boot is insulated in such way that the inside temperature increase does not reach the 10ºC.

4 ERGONOMY, SHAPE AND SIZES: - In taller and wider than the rest of market shapes for better comfort. It is taken into account that the boots are to be used with socks or thick stockings so the feeling is better and more comfortable. - About sizes, they come from a 36 to 48. The equivalence with other sizing methods are as follows:: EU UK MP ½ ½ ½ ½ WATERPROOF FULL GRAIN LEATHER: Leather used in this boot and genuine first quality cow leather of 2,3mm thickness, black colour, comfortable and soft touch. In addition: - Offers a waterproof treatment of more than 7 hours. In comparison with WRU test in the European Normative for professional use of footwear, 7 times more than required. - Offers a high level of breathability of more than 7,5mg/cm 2 h, which improves in 8 times the minimum required breathability of the European Normative for professional use footwear. - It is also tested in CHROME VI content with no sign of harmful substances..

COMFORT INSOLE: The comfort insole is made of Polyester fabrics, white color and with the same contact material OUTLAST lining high resistance to abrasion in orange color.

- With 6mm thickness, helps cushioning and with great thermal insulation. - Anti bacteria treatment for a total feet hygiene. - Permanently Antistatic.

5 COMFORT INSOLE: The comfort insole is made of Polyester fabrics, white color and with the same contact material OUTLAST lining high resistance to abrasion in orange color. In Addition: - Is Thermoformed and anatomic, adapted to heel and foot to get the perfect setting.. - Is breathable and absorbent, to keep feet always dry. - With 6mm thickness, helps cushioning and with great thermal insulation. - Anti bacteria treatment for a total feet hygiene. - Permanently Antistatic. - Washable in cold water CORDURA from INVISTA : Cordura material is a high tenacity polyamide fabric that is abrasion resistant, breathable and lightweight. TRUENO SAFETY uses Cordura material for the instep, neck and tongue. Features: - High durability: twice as resistant as nylon, 3 times more than polyester and 7 times more than cotton. - Excellent abrasion resistance - Very resistant to punching. - Lightweight Reduces the weight of the shoe where it replaces leather parts. - Very easy care. - Fast drying. It absorbs very little moisture. - Very breathable. - Repels water with repellent treatments COOLMAX from INVISTA : Maximum capillary action to ward off sweat, improve air circulation and quick drying.

6 ANTISTATIC SHOE: TRUENO s footwear is ANTISTATIC. Test A of the European Normative EN / EN ISO Materials and structure of the footwear helps to clear the electrostatic charges as shows a resistance versus current bypass between 0,1MΩ y 1.000MΩ. Antistatic footwear should be used wherever needed to reduce the amount of electrostatic charges, avoiding deflagration risk by sparks of different substances and its vapours, as well as the risk bonded to the lack of electrical discharge on some equipment. SPECIAL PACKING AND LABELLING: According to customers needs..

PRODUCT CATALOG

2015-16 PRODUCT CATALOG Solid Gear provides utility footwear for professional workers. Combining sportive design with technical functionality, persisting on nothing less than perfection. When every