~tr ~gencp cteertlftcate

Transcription

1 UNITED STATES OF AMERICA DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION ~tr ~gencp cteertlftcate Jf/~~ A9PR286X AEROSPACE COATINGS INTERNATIONAL, LLC ~~~a 370 Knight Drive Oxford, Alabama ~~dd~~~&bdl~ aud~~c;/~y~~~ ~w~~c;/cuv~~~ cvnda ~ w ~ cuv ~REPAIR STATION aud~~~.: LIMITED AIRFRAME (09/22/2015) LIMITED ENGINE (10/12/2016) LIMITED NON-DESTRUCTIVE LIMITED ACCESSORY LIMITED LANDING GEAR COMPONENTS LIMITED SPECIALIZED SERVICES (10/12/2016) Yk~. ~~~~~ ~ ~ m #-ot INDEFINTELY FEBRUARY 22, 2002!78y- ~?<ec.&b?z- c;/ de~,..~;,~ JJL.~ LINDA E. SILVERTOOTH ~ANA.GER, SO-FSD0-09 ' \Ebi5 ({crtifimtt is ltot \Eransfcrab[t, AND ANY MAJOR CHANGE IN THE BASIC FACILITIES, OR IN THE LOCATION THEREOF, SHALL BE IMMEDIATELY REPORTED TO THE APPROPRIATE REGIONAL OFFICE OF THE FEDERAL A'{IATION ADMINISTRATION A uy alteratiou of tlris certificate is pmlislwble by a fiue of uot exceediug $1,000, or imprisomueut uot exceediug 3 years, or botlr I FAA Form (1-67) SUPERSEDES FAA FORM 390. Electronic Forms (PDF)

2

3 U.S. Department of Transportation Federal Aviation Administration Operations Specifications Table of Contents Part A 00 1 Issuance and Applicability 002 Definitions and Abbreviations 003 Ratings and Limitations 004 Summary of Special Authorizations and Limitations 007 Designated Persons 449 Antidrug and Alcohol Mi suse Prevention Program HQ CONTROL DATE 0 1/3 1/ / /30/ /23/ /19/ / 17/2009 EFFECTIVE DATE 04/27/ /27/ / /04/ / 12/ /04/20 11 AMENDMENT NUMBER AEROSPACE COATINGS PartA-1 INTERNATIONAL LLC Print Date: 10/12/2016 Certificate No.: A9PR286X

4 I U.S. Department of Transportation Federal Aviation Administration Operations Specifications AOOI. Issuance and Applicability HQ Control: HQ Revision: a. These operations specifications are issued to AEROSPACE COATINGS INTERNATIONAL LLC, a Repair Station located in the United States, pursuant to 14 CFR Part 145, The repair station certificate holder shall conduct operations in accordance with 14 CFR Part 145 and these operations specifications. The certificate holder's address: Fixed Location: 370 KNIGHT DRIVE Oxford, Alabama b. The holder of these operations specifications is the holder of certificate nwnber A9PR286X and shall hereafter be referred to as the "certificate holder". c. These operations specifications are issued as part of this repair station certificate and are in effect as of the date approval is effective. This certificate and these operations specifications shall remain in effect until the certificate for a repair station that is located in the United States is surrendered, suspended, or revoked. d. The repair station specified on these operations specifications and located within the United States performs maintenance and/or an alteration of aircraft and/or aeronautical products to be installed on aircraft under the terms and conditions of the U.S.IEC Safety Agreement, Annex 2, Maintenance, between the FAA and the EC. e. The certificate holder is authorized to use only the business name which appears on the certificate to conduct the operations described in subparagraph a. 05d Delegated authorities: None Print Date: 4/27/2012 AOOI-I Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

5 I u.s. Department of Transportation Federal Aviation Administration Operations Specifications 1. Issued by the Federal Aviation Administration. 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator. 21) (':05 : 2(1l\ nlr~iii) ~I\li~hL lim-: l.lkollio)l: W-:bUI'SS. Di\!iL<l11I si!.!n-:d h\' l{uh-:rl Hllilod. I'rj~lci [1,;1 \lailllc n:hkc 1 nsi'-:clllr (SUO'!) 4. Date Approval is effective: 04127/2012 Amendment Number: 5 5. I hereby accept and receive the Operations Specifications in this paragraph. Hopkins, Rodney D., QUALITY MANAGER :r\l~ Date: 04127/2012 Print Date: 4127/2012 AOOI-2 Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

6 I U.S. Department of Transportation Federal Aviation Ad ministration Operations Specifications A002. Definitions and Abbreviations HQ Control: 01112/2012 HQ Revision: Unless otherwise defined in these operations specifications, all words, phrases, definitions, and abbreviations have identical meanings to those used in 14 CFR and 49 U.S.c., as cited in Public Law , as amended. Additionally, the definitions listed below are applicable to operations conducted in accordance with these operations specifications.. 05b BASA Certificate Holder CFR CJass rating EASA EASA Accountable Manager Exemption FAA Accountable Manager Geographic Authorization The Bilateral Aviation Safety Agreement (BASA) is an executive agreement concluded between the United States and a foreign country for the purpose of promoting aviation safety; also known as an Agreement for the Promotion of Aviation Safety. In these operations specifications, the term "certificate holder" means the holder of the repair station certificate described in these operations specifications in Part A paragraph AOO I and any of its officers, employees, or agents used in the conduct of operations under this certi fica te. Code of Federal Regulations As used with respect to the certification, ratings, privileges, and limitation of aircraft within a category having similar operating characteristics. European Aviation Safety Agency The manager who has corporate authority for ensuring that all maintenance required by the customer can be financed and carried out to the standard required by the EASA full-member Authority. An authorization that permits an alternate means of compliance with a specific CFR. The exemption must meet the procedural requirements of 14 CFR Part 11. A person designated by the certificated repair station who is responsible for and has authority over all repair station operations that are conducted under 14 CFR Part 145, including ensuring that the repair station's personnel follow the regulations and serving as the primary contact with the FAA. An approval provided to a repair station located outside the United States to perform maintenance support under contract for a U.S. air carrier (or an operator of U.S.- registered aircraft under 14 CFR Part 129) at a location other than the repair station facility. A geographic authorization is issued by the FAA to respond to a U.S. air carrier's or Part 129 foreign operator's need for maintenance at a station where the frequency and scope of that maintenance does not Print Date: 4/27/2012 A002-1 Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

7 I U.S. Department of Transportation Federal Aviation Administration Operations Specifications warrant permanently staffing and equipping the station for its accomplishment. Limited Rating Limited Ratings Specialized Services Line Maintenance MAG Maintenance U.S.IEC Aviation Safety Agreement, Annex 2, Maintenance MIP MOE Preventive Maintenance QCM Repair Station located in the United States Repair Station located outside the United States RSM A rating issued to repair stations for the performance of maintenance on particular makes and models of airframes, powerplants, propellers, radios, instruments, accessories, and/or parts. Rating issued for a special maintenance function when the function is performed in accordance with a specification approved by the Administrator. Any unscheduled maintenance resulting from unforeseen events, or scheduled checks where certain servicing and/or inspections do not require specialized training, equipment, or facilities. The Maintenance Annex Guidance (MAG) defines the process that the FAA and EASA undertake in the inspection, findings of compliance certification, and monitoring of repair stations, as well as their joint cooperation in quality assurance and standardization activities in support of the Agreement, Annex 2, Maintenance. The inspection, overhaul, repair, preservation, and replacement of parts, but excludes preventive maintenance. Annex 2 covers the reciprocal acceptance of findings of compliance, approvals, documentation and teclmical assistance regarding approvals and the monitoring of repair stations/maintenance organizations. Maintenance Implementation Procedures (MlP) are procedures for implementing the provisions of a BAS A that apply to maintenance. A maintenance organization exposition (MOE) pertains to EASA member countries that use an MOE in place of a Repair Station Manual (RSM) and a Quality Control Manual (QCM). As defined in 14 CFR part 1 and part 43 appendix A, subparagraph (c). Quality Control Manual A certificated repair station located in the United States. A certificated repair station located outside of the United States. Repair Station Manual Print Date: 4/27/2012 A002-2 Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

8 U.S. Department of Transportation Federal Aviation Administration Operations Specifications 1. Issued by the Federal Aviation Administration. 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator. ~I) I ~. ()-l.27 ) (,:lih:.' (' (,,'l1lr o.1i i>o. vld1l' fin,,: 1.(lc '-l lilll1 : \\'(b()ps') - l.) i~lla lh, i~lh:ti hv 1{"b..: ri I.h lllod, P ri~lcil' o il \lail1k'n;l l1cc 111 ' I'CClllf (S()(j\)) 4, Date Approval is effective: 04/27/2012 Amendment Number: 5 5, I hereby accept and receive the Operations Specifications in this paragraph. Hopkins, Rodney D., QUALITY MANAGER K~~",~ Date: 04/27/2012 Print Date: 4/27/2012 A002-3 Certificate No.: A9PR2 86X AEROSPACE COATINGS INTERNA TIONAL LLC

9 U.S. Department of Transportation Federal Aviation Administration Operations Specifications A003. Ratings and Limitations HQ Control: 01130/2004 HQ Revision: 010 The Certificate Holder is authorized the following Ratings and/or Limitations: Class Ratings None authorized Limited Ratings Rating Landing Gear Components Nondestructive Inspection, Testing, and Processing Accessories Airframe Engines Manufacturer From the accepted Capability List, as amended. N/A From the accepted Capability List, as amended. From the accepted Capability List, as amended. From the accepted Capability List, as amended. Make/Model From the accepted Capability List, as amended. N/A From the accepted Capability List, as amended. From the accepted Capability List, as amended. From the accepted Capability List, as amended. Limitations None Limited to Magnetic Particle and Liquid Penetrant in accordance with ASTM-E-141 7, ASTM-E-1444, manufacturer's current technical/component data, Air Carrier's Manual or other data acceptable to the Administrator. None Limited to Inspection, Overhaul, Repair and Modification of Aircraft Cargo Netting Systems in accordance with Accepted Manufactures Maintenance Manual and FA A Approved Data. Limited to Inspection, Overhaul, Repair of Engine Insulation Blankets in accordance with Accepted Manufactures Maintenance Manual and FAA Approved Data. Limited Ratings - Specialized Services Rating Plating Specifications Limitations AMS 2400, 2401, 2403, 2404, 2410, 2416, 2401,2419, 2406, Repair limitations as contained in the 2423,2424,2460, AMS 2415/4B, 2451/2A, AMS-QQ-P-416, referenced Civil or Military QQ-N-290, BOEING , I, , , 20- Specification, as revised and/or 11-03, BOEING I, , , customer work request. 05, , , MIL/STD-870, MIL/STD-1500, MIL/STD-865. Machining AMS 2453, BOEING , , , , , , MIL/STD-866. Plasma AMS 2437,2447, BOEING BMS 10-67, MIL/STD-3021 Repair limitations as contained in the referenced Civil or Military Specification or manufacturer's maintenance manuals as revised and/or customer work request. Repair limitations as contained in the AEROSPACE COATINGS INTERNATIONAL LLC A003-l Arndt. No: 9 Certificate No.: A9PR286X

10 U.S. Department of Transportation Federal Aviation Administration Operations Specifications Rating Spray Metal Processing Welding Specifications MIL/STD-871, MIL/STD-867, AMS-2759 Limitations referenced Civil or Military Specification or manufacturer's maintenance manuals as revised and/or customer work request. Repair limitations as contained in the referenced Civil or Military Specification. A WS D 16.1 M (Fusion Welding), A WS B2.2/B2M (Brazing) Repair limitations as contained in the referenced Civil or Military Specification. l. Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Jack E. Clark, Principal Maintenance Inspector (S009) [I] EFFECTIVE DATE: 1 0/I 2/20 16, [2] AMENDMENT #: 9 DATE: :27:44-05:00 3. I hereby accept and receive the Operations Specifications in this paragraph. ~~~ ;o/-;/mj{ McCARTY, PATRICK, PRESlDENT Date AEROSPACE COATINGS INTERNATIONAL LLC A003-2 Arndt. No: 9 Certificate No.: A9PR286X

11 I u.s. Department of Transportation Federal Aviation Administration Operations Specifications A004. Summary of Special Authorizations and Limitations HQ Control: 09/23/1998 HQ Revision: 010 a. The certificate holder, in accordance with the reference paragraphs, is authorized to: Conduct operations choosing to have an antidrug and alcohol misuse prevention program. Reference Paragraphs A449 b. The certificate holder is not authorized and shall not: Use Exemptions. Use an approved electronic recordkeeping system, electronic/digital signature, and/or electronic media. Reference Paragraphs A005 A025 Perform maintenance with NAA ratings where the scope of work is authorized A060 by a BASAIMIP. Perform work, including continuous operations, at additional locations other than AlOl at its primary fixed location. Perform maintenance in accordance with foreign repair station geographic authorizations. B050 Pe~orn: work, ~xcluding ~ntinuous operations, at additional locations other than moo at Its pnmary Fixed location. Perform line maintenance for cert. holders conducting operations under Parts 121 and 135 and for foreign carriers/persons operating U.S. registered aircraft in DlO7 common carriage under Part 129, apart from D100 which authorizes that work away from station. Print Date: 12/81201 I A004-1 Certificate No. : A9PR286X AEROSPACE COATINGS INTERNA TIONAL LLC

12 U.S. Department of Transportation Federal Aviation Administration Operations Specifications 1. Issued by the Federal Aviation Administration. 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator. ~I)II. I ~. O~ II :0-:2(, L,'nlral SI;1I1,hird Tim,' I.l,,;alion: \\""h( If'SS DiC!il.all\,i~ll"d by Rllh<:rt Hull!)c\,;. I'ri~l<:il',;1.\Llilllc n~lih:c: In'l't:clllr (S( )I)l)) 4. Date Approval is effective: 10/04/2011 Amendment Number: 9 5. I hereby accept and receive the Operations Specifications in this paragraph. Date: 10104/2011 Print Date: 12/8/2011 A004-2 Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

13 U.S. Department of Transportation Federal Aviation Administration Operations Specifications A007. Designated Persons HQ Control: 12/19/2006 HQ Revision: 030 a. The personnel listed in the following table are designated to officially apply for and receive operations specifications for the certificate holder indicated below. Table 1 - Designated Persons to Apply for and Receive Authorizations Title Name Parts Authorized Director of Maintenance I PRESIDENT McCARTY, Ji'ATRICK A,D FAA Accountable Manager, 145 I QUALITY MANAGER Lee, Khay Chong A,D EASA Accountable Manager, 145 ' Quality Manager Lee, Khay Chong A,D b. The following personnel listed in Table 2 are designated by the certificate holder to receive Information for Operators (INFO) messages for the certificate holder as indicated below. A receipt for the information by an operator or person is not required. Table 2 - Designated to Receive INFO Messages Name Address Telephone No. Type of Information to Receive Patrick McCarty pmccarty@aerocoatings.com ALL khay Chong Lee kc.lee@aerocoatings.com ALL 1. Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Jack E. Clark, Principal Maintenance Inspector (S009) [I] EFFECTIVE DATE: I 0/ I 2/20 16, [2] AMENDMENT#: 7 DATE: 20I :29:06-05:00 3. I hereby accept and receive the Operations Specifications in this paragraph. McCARTY, PATRIC Date Jrl/!7~tr6 AEROSPACE COATINGS INTERNATIONAL LLC A007-l Arndt. No: 7 Certificate No.: A9PR286X

14 ti U.S. Department of Transportation Federal Aviation Administration Operations Specifications A449. Antidrug and Alcohol Misuse Prevention Program HQ Control: 07/ HQ Revision: OOa a. The Part 145 repair station certificate holder has elected to implement an Antidrug and Alcohol Misuse Prevention Program, because the certificate holder perfonns safety-sensitive ftmctions for a 14 CFR Part 121, and 135 certificate holder and/or for a 14 CFR Part 91 operator conducting operations under Section b. The certificate holder certifies that it will comply with the requirements of 14 CFR Part 120 and 49 CFR Part 40 for its Antidrug and Alcohol Misuse Prevention Program. c. Antidrug and Alcohol Misuse Prevention Program records are maintained and available for inspection by the FAA's Drug Abatement Compliance and Enforcement Inspectors at the location listed in Table 1 below: Telephone Number: A I (256) Address: 370 Knight Drive Address: City: Oxford State: AL Zip code: Table 1 Location & Telephone of Antidrug and Alcohol Misuse Prevention Program Records: d. Limitations and Provisions. (1) Antidrug and Alcohol Misuse Prevention Program inspections and enforcement activity will be conducted by the Drug Abatement Division. Questions regarding these programs should be directed to the Drug Abatement Division. (2) The certificate holder is responsible for updating this operations specification when any of the following changes occur: (a) Location or phone number where the Antidrug and Alcohol Misuse Prevention Program Records are kept. (b) If the certificate holder's number of safety-sensitive employees goes to 50 and above, or falls below 50 safety-sensitive employees. (3) The certificate holder with 50 or more employees perfonning a safety-sensitive function on January I of the calendar year must submit an annual report to the Drug Abatement Division of the FAA. (4) The certificate holder with fewer than 50 employees perfonning a safety-sensitive function on January I of any calendar year must submit an annual report upon request of the Administrator, as specified in the regulations. The certificate holder has 50 or more safety-sensitive employees. Print Date: 12/8/20 II A449-1 Certificate No.: A9PR286X AEROSPACE COATINGS INTERNATIONAL LLC

15 U.S. Department of Transportation Federal Aviation Administration Operations Specifications 1. Issued by the Federal Aviation Administration. 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator. ~I) ~J)S I I :()l) ::,:, C,'lllral SI:lllllard Tilll,' l. ll' ~lli()ll : \\',' h( II'S'> Di!.!ilali\, j:!ik'd h,' 1~"h,'I'1 Huliock. I'rjil<.:il' ~ ;1.\lclillk'Il:1I1l'" 11l' J'l:dor lsi )ll')) 4. Date Approval is effective: 10/ Amendment Nwnber: 7 5. I hereby accept and receive the Operations Specifications in this paragraph. Hopkins, Rodney D., QUALITY MANAGER ~ :Y-~ Date: 10/04/2011 Print Date: 12/8/2011 A449-2 Certificate No.: A9PR286X AEROSPACE COATfNGS INTERNATIONAL LLC

16

17

18

19 \. ',',.,: :. '..',_... ',',.. " r.olsz/l J" i -..,..., I t";'"...-,.0,'" "I. ' IO'~' """ 'IUP!I"I' IIVYJ.IlpJO -rljalul! aql 'IIf.oI ipaoo. T.uOn.~lll., ". \ T1_OO.::lIld80~ ~ Po- ~"Itoq,....apt1"""'I.Cm~,""\ OlptUD? '1 ~~ 'If IIO~ GIll, ;.\:...-:...1:~;.:..:..:"'. -:-- _... I1'qI n~~..! --.~t:',!!.w!lilitf~~~~i.-y-~oi~~ -IPU~~....

20 ,....!3 ~, :E~ ~ i...,i~m 11'\.', l if '!1i.:" ~...- Avlldoa IIcni:a1p; Orvund S&.carfI;y C-"""'; Air Tnlfio.~ocol " o Q... '.'~ ".. ~,'.. ",.

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36