Note: For issue of a Type Rating, the certificate of completion of the type rating course must be attached to this form.

Transcription

1 issued under the Civil Aviation Jot Aviation Requirements Order: JAR-FCL 1 Amendment 7 Civil Aviation Directorate Transport alta, Luqa Airport, Luqa LQA 3290 alta. Tel: Fax: fo.tm@transport.gov.mt WARNING TO ALL APPLICANTS Any false statement, misrepresentation or concealment of material fact on this form or any document presented support of this application may be grounds for crimal prosecution. INFORATION PROTECTED Transport alta Civil Aviation Directorate collects and processes formation to carry out its functions under the Civil Aviation Act. All data is collected and processed accordance to the Data Protection Act 2001, the Civil Aviation Act, the Air Navigation Order, the Civil Aviation Jot Aviation Requirements Order, other subsidiary legislation and the Privacy Policy of Transport alta a copy of which is available on demand and also on website: PERSONAL INFORATION Surname First Name Permanent Address Number Name Street Town Country Postal Code ailg Address (if different from Above) Number Name Street Town Country Postal Code Home Telephone No. Fax No: (Optional) Address (Optional) Alternative Telephone No. PERSONAL DETAILS Type of licence held Licence No. State of Issue Name and Address of Operatg Company/Employer Telephone of Operator Number Name Street Town Postal Code SKILL TEST AND PROFICIENCY S FOR FOR AEROPLANE ULTI-PILOT TYPE RATING AND ATPL I apply to have the... Type ratg cluded my pilot s licence. Application for: [*Delete as Applicable] ATPL(A) / TYPE RATING / TRAINING / ICIENCY / REVALIDATION / RENEWAL /INSTRUENT REVALIDATION / PIC /CO-PILOT* Note: For issue of a Type Ratg, the certificate of completion of the type ratg course must be attached to this form. DECLARATION I declare that the formation provided on this form is correct. Date Day onth Year Signature Form T/CAD/0012 Issue 1 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 1 of 14

2 EXAINERS NOTIFICATION OF COPLETION I hereby certify completion of : ATPL (A) SKILL TEST TYPE / INSTRUENT RATING TRAINING ATTEPT 1 ATTEPT 2 Full Name of Applicant: Licence Number of Applicant: Date Test Completed: (dd/mm/yyyy) Aircraft Registration / Simulator Code: PASS Type Ratg to be Issued /Revalidated / Renewed Type / Instrument Ratg is now valid until (date) : PROFICIENCY REVALIDATION RENEWAL PILOT-IN-COAND CO-PILOT FAIL Licence Ratg Page Signed ( Revalidation Only): Yes* No* Name of Examer ( CAPITAL LETTERS) Examer s Authorisation Number : Examer s Licence Number : Signature of Examer : Date of Signature : NOTIFICATION OF FAILURE (*DELETE AS APPLICABLE) Name...Licence No:... Aeroplane Type:... I understand that I have failed this test / check* and that I may not use the privileges of the ratg until a further successful test has been. I acknowledge the retrag requirements of Signature of Applicant: Date:... Any person who has failed any test or examation which he/she is required to pass before he/she is granted or may exercise the privileges of a personal licence may, with 14 days of beg notified of his/her failure, request that Transport alta of Civil Aviation determes whether the test or examation was properly conducted. dissatisfaction with the result is not sufficient reason for appeal. FOR OFFICAL USE ONLY Type / Instrument Ratg : Issued / Revalidated / Renewed * Receipt No: Examer Authorisation checked Simulator Approval checked Data entered PEL Database Date Amount Actioned by:... Date:... ere When send this form to: TRANSPORT ALTA Civil Aviation Directorate Personnel Licensg Section Luqa Airport, Luqa LQA 3290 alta Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 2 of 14

3 Contents of the ATPL/ type ratg/ trag/skill test and proficiency check on multi-pilot aeroplanes (See JAR FCL through and 1.295) 1 The followg symbols mean: P = Traed as Pilot--command or Co-pilot and as Pilot Flyg (PF) and Pilot Not Flyg (PNF) for the issue of a type ratg as applicable. X = Simulators shall be used for this exercise, if available, otherwise an aircraft shall be used if appropriate for the manoeuvre or procedure. P# = the trag shall be complemented by supervised aeroplane spection 2 The practical trag shall be conducted at least at the trag equipment level shown as (P), or may be conducted up to any higher equipment level shown by the arrow (- - - ). The followg abbreviations are used to dicate the trag equipment used: A = Aeroplane = Flight Simulator FTD = Flight Trag Device OTD = Other Trag Devices 3 The starred items (*) shall be flown solely by reference to struments. If this condition is not met durg the skill test or proficiency check, the type ratg will be restricted to VFR only. 4 Where the letter appears the skill test/ proficiency check column this will dicate a mandatory exercise. 5 A flight simulator shall be used for practical trag and testg if the simulator forms part of an approved type-ratg course. The followg considerations will apply to the approval of the course: (a) the qualification of the flight simulator or FNPTII as set out JAR-STD; (b) the qualifications of the structor and examer; (c) the amount of le-orientated simulator trag provided on the course; (d) the qualifications and previous le operatg experience of the pilot under trag; and (e) the amount of supervised le flyg experience provided after the issue of the new type ratg See also Pages 13 and 14 Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 3 of 14

4 (cludg ulti-crew Section 1 1 Flight preparation 1.1 Performance calculation 1.2 Aeroplane ext. visual spect; location of each item and purpose of spection itials trag OTD FTD A A P P# P Examer s itials 1.3 Cockpit spection P 1.4 Use of checklist prior to startg enges, startg procedures, radio and navigation equipment check, selection and settg of navigation and communication frequencies P Taxyg compliance with air traffic control or structions of structor. P Before take-off checks P Section 2 2 Take-offs 2.1 Normal take offs with different flap settgs, cludg expedited take off P * Instrument take-off; transition to strument flight is required durg rotation or immediately after becomg airborne P Cross wd take-off (A, if practicable) P Take-off at maximum take-off mass (actual or simulated maximum take-off mass) P Take-offs with simulated enge failure 2.5.1*shortly after reachg V 2 P Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 4 of 14

5 (cludg ulti-crew (In aeroplanes which are not certificated as transport category aeroplanes (JAR/FAR 25) or as commuter category aeroplanes (SFAR 23), the enge failure shall not be simulated until reachg a mimum height of 500 ft above runway end. In aeroplanes havg the same performance as a transport category aeroplane regardg take-off mass and density altitude, the structor may simulate the enge failure shortly after reachg V 2 ). itials trag OTD FTD A A Examer s itials 2.5.2* between V 1 and V 2. P X 2.6 Rejected take-off at a reasonable speed before reachg V 1. P-- -- X Only Section 3 3 Flight anoeuvres and Procedures 3.1 Turns with and without spoilers 3.2 Tuck under and ach buffets after reachg the critical ach number, and other specific flight characteristics of the aeroplane (e.g. Dutch Roll) P-- P X An aircraft may not be used for this exercise 3.3 Normal operation of systems and controls engeer s panel Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 5 of 14

6 (cludg ulti-crew 3.4 Normal and abnormal operations of followg systems: Enge (if necessary propeller) Pressurisation and air-conditiong itials trag OTD FTD A A Examer s itials A mandatory mimum of 3 abnormal shall be selected from to clusive Pitot / static system Fuel System Electrical System Hydraulic system Flight control and Trim system 3.4.7Anti-and de-icg system Glare shield heatg Autopilot/Flight director Stall warng devices or stall avoidance devices, and stability augmentation devices Ground proximity warng system Weather radar, radio altimeter, transponder P Radios, navigation equipment, struments, flight management system Landg gear and Brake Slat and flap system Auxiliary power unit Intentionally left blank Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 6 of 14

7 (cludg ulti-crew 3.6 Abnormal and emergency procedures: Fire drills e.g. Enge, APU, cab, cargo compartment, flight deck, wg and electrical fires cludg evacuation Smoke control and removal Enge failures, shut down and restart at a safe height Fuel dumpg (simulated) Wdshear at Take off / Landg Simulated cab pressure failure/ Emergency descent Incapacitation of flight crew member Other emergency procedures as outled the appropriate aeroplane Flight anual OTD FTD A P P P P P X P P P ACAS event P Steep turns with 45 0 bank, to left and right 3.8 Early recognition and counter measures on approachg stall (up to activation of stall warng device) take-off configuration (flaps takeoff position), cruisg flight configuration and landg configuration (flaps landg position, gear extended) Recovery from full stall or after activation of stall warng device climb, cruise and approach configuration. P P P X itials trag Examer s itials A Only Only A mandatory mimum of 3 items shall be selected from to clusive. Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 7 of 14

8 (cludg ulti-crew itials trag OTD FTD A A Examer s itials 3.9 Instrument flight Procedures 3.9.1* Adherence to departure and arrival routes and ATC structions P * Holdg procedures. P * Precision approaches down to a decision height (DH) not less than 60m (200 ft) * manually, without flight director * manually, with flight director P P (skill test only) * with autopilot P * manually, with one enge simulated operative; enge failure has to be simulated durg fal approach from before passg the outer marker (O) until touchdown or through the complete missed approach procedure. P In aeroplanes which are not certificated as transport category aeroplanes(jar/far 25) or as commuter category aeroplanes (SFAR 23), the approach with simulated enge failure and the ensug go-around shall be itiated conjunction with the non-precision approach as described The go-around shall be itiated reachg the published obstacle clearance height (OCH/A), however, not later than reachg a mimum descent height/altitude (DH/A) of 500 ft above runway threshold elevation. In aeroplanes havg the same performance as a transport category aeroplane regardg takeoff mass and density altitude,the structor may simulate the enge failure accordance with Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 8 of 14

9 (cludg ulti-crew 3.9.4* NDB or VOR/LOC approach down to DH/A. OTD FTD A itials trag P* Examer s itials A Circlg approach under followg conditions: (a)* approach to the authorised mimum circlg approach altitude at the aerodrome question accordance with the local strument approach facilities simulated strument flight conditions; followed by: (b) circlg approach to another runway at least 90 o off centrele from fal approach used item a), at the authorised mimum circlg approach altitude; Remark: If a) and b) are not possible due to ATC reasons a simulated low visibility pattern may be performed. Section 4 4 issed Approach Procedures P* Go-around with all enges operatg* after an ILS approach on reachg decision height. P* Other missed approach procedures P* * anual Go-around with the critical enge simulated operative after an strument approach on reachg DH, DH or APt P* Rejected landg at 15 m (50 ft) above runway threshold and go-around P Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 9 of 14

10 (cludg ulti-crew Section 5 itials trag OTD FTD A A Examer s itials 5 Landgs 5.1 Normal landgs* also after an ILS approach with transition to visual flight on reachg DH. P 5.2 Landg with simulated jammed horizontal stabiliser any out-of-trim position. P--- An aircraft may not be used for this exercise 5.3 Cross wd landgs (a/c, if practicable). P Traffic pattern and landg without extended or with partly extended flaps and slats P Landg with critical enge simulated operative P Landg with two enge operative: - Aeroplanes with three enges: the centre enge and one outboard enge as far as practicable accordg to data of the AF. - Aeroplanes with four enges: two enges at one side. P X Only (skill test only) General remarks: Special requirements for extension of a type ratg for strument approaches down to a decision height of less than 200 feet (60 m), i.e. Cat II / III operations. (Refer to Subpart E, paragraph 1.180) Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 10 of 14

11 (cludg ulti-crew Section 6 itials trag OTD FTD A A Examer s itials 6 Additional authorisation on a type ratg for strument approaches down to a decision height of less than 60 m (200 ft) (CAT II/III) The followg manoeuvres and procedures are the mimum trag requirements to permit strument approaches down to a DH of less than 60 m (200 ft). Durg the followg strument approaches and missed approach procedures all aeroplane equipment required for type certification of strument approaches down to a DH of less than 60 m (200 ft) shall be used. 6.1* Rejected take-off at mimum authorised RVR. P* X An aircraft may not be used for this exercise * 6.2* ILS Approaches In simulated strument flight conditions down to the applicable DH, usg flight guidance system. Standard procedures of crew coordation (task sharg, call out procedures, mutual surveillance, formation exchange and support) shall be observed. P Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 11 of 14

12 (cludg ulti-crew OTD FTD A itials trag A Examer s itials 6.3* Go-around after approaches as dicated 6.2 on reachg DH. The trag also shall clude a go-around due to (simulated) sufficient RVR, wd shear, aeroplane deviation excess of approach limits for a successful approach, and ground/airborne equipment failure prior to reachg DH and, goaround with simulated airborne equipment failure P * 6.4* Landg(s) with visual reference established at DH followg an strument approach. Dependg on the specific flight guidance system, an automatic landg shall be performed P NOTE: CAT II / III operations shall be accomplished accordance with Operational Rules. Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 12 of 14

13 Guidance 1. (a) For PA: The applicant shall pass all sections of the skill test/proficiency check. Failure of more than five items will require the applicant to take the entire test/check aga. Any applicant failg 5 or less items shall take the failed items aga. Failure any item on the re-test/check cludg those items that have been passed at a previous attempt will require the applicant to take the entire check/test aga. (b) (c) In case the applicant fails only or does not take Section 6, the type ratg will be issued without Cat II or III privileges. Section 6 is not part of the ATPL skill test. 2. Further trag may be required after a failed test/check. Failure to achieve a valid pass all sections two attempts shall require further trag as determed by the examer. There is no limit to the number of skill tests/proficiency checks that may be attempted. CONDUCT OF THE TEST/ GENERAL 3. Should an applicant choose not to contue with a test/check for reasons considered adequate by the examer, the applicant will be regarded as havg failed those items not attempted. If the test/check is termated for reasons considered adequate by the examer, only those items not shall be tested a further flight. 4. At the discretion of the examer any manoeuvre or procedure of the test/check may be repeated once by the applicant. The examer may stop the test/check at any stage if it is considered that the applicant s competency requires a complete re-test/re-check. 5. Checks and procedures shall be carried out/ accordance with the authorised checklist for the aeroplane used the test/check and, if applicable, with the CC concept. Performance data for take-off, approach and landg shall be calculated by the applicant compliance with the operations manual or flight manual for the aeroplane used. Decision heights/altitude, mimum descent heights/altitudes and missed approach pot shall be determed by the applicant for the ATPL(A) and/or for the type/class ratg holder durg the proficiency check, as applicable. SPECIAL REQUIREENTS FOR THE SKILL TEST/PROFICIENCY FOR A ULTI-PILOT AEROPLANE AND FOR THE SKILL TEST REQUIRED FOR THE ATPL(A) 6. The test/check for a multi-pilot aeroplane shall be performed a multi-crew environment. Another applicant or another pilot, may function as second pilot. If an aeroplane, rather than a simulator, is used for the test/check, the second pilot shall be an structor. 7. An applicant shall be required to operate as pilot flyg (PF) durg all sections of the test/check, except item 2.6 and abnormal and emergency procedures items to and items to which may be conducted as PF or PNF accordance with ulti-crew Co-operation ( accordance with Appendix 2 to & 1.295). The applicant for the itial issue of a multi-pilot aeroplane type ratg or ATPL(A) shall also demonstrate the ability to act as pilot not flyg (PNF). The applicant may choose either the left hand or the right hand seat for the test/check if all items the test/check can be executed from the selected seat. 8. The followg matters shall be specifically checked g/checkg applicants for the ATPL(A) or a type ratg for multi-pilot aeroplanes extendg to the duties of a pilot--command, irrespective of whether the applicant acts as PF or PNF: (a) management of crew co-operation; (b) matag a general survey of the aeroplane operation by appropriate supervision; and (c) settg priorities and makg decisions accordance with safety aspects and relevant rules and regulations appropriate to the operational situation, cludg emergencies. 9. The test/check should be accomplished under IFR and as far as possible a simulated commercial air transport environment. An essential element is the ability to plan and conduct the flight from route briefg material. Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 13 of 14

14 FLIGHT TEST TOLERANCE 10. The applicant shall demonstrate the ability to: (a) operate the aeroplane with its limitations; (b) complete all manoeuvres with smoothness and accuracy; (c) exercise good judgement and airmanship; (d) apply aeronautical knowledge, (e) mata control of the aeroplane at all times such a manner that the successful outcome of a procedure or manoeuvre is never doubt; (f) understand and apply crew co-ordation and capacitation procedures, if applicable; and (g) communicate effectively with the other crew members, if applicable. 11. The followg limits are for general guidance. The examer shall make allowance for turbulent conditions and the handlg qualities and performance of the type of aeroplane used. Height Generally Startg a go-around at decision height imum descent height/ altitude ± 100 feet + 50 feet/-0 feet + 50 feet/-0 feet Trackg Headg on radio aids ± 5 Precision approach half scale deflection, azimuth and glide path all enges operatg ± 5 with simulated enge failure ± 10 Speed all enges operatg with simulated enge failure ± 5 knots + 10 knots / -5 knots When the type ratg course cludes less than 2 hours flight trag on the aeroplane, the skill test make be flight simulator only and may be before the flight trag on the aeroplane. In that case, a certificate of completion of the type ratg course cludg the flight trag on the aeroplane shall be forwarded to Transport alta Civil Aviation Directorate before the new type ratg is entered the applicant s licence. Version:. 01/12/2006 JAR-FCL 1 Amendment 7 Form T/CAD/0012 Transport alta is the Authority for Transport alta set up by ACT XV of 2009 Page 14 of 14