White - 4ft6 Bed with Slats

Transcription

1 White - 4ft6 Bed with Slats Assembly Instructions - Please keep for future reference Dimensions Width - 148cm Depth - 204cm Height -9cm Important Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Issue 1-22//

2 Safe and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the components and tools listed on page 2 and 3. Remove all fittings from the plastic bags and separate them into their groups. eep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to lay out the parts before starting. Do not stand or put weight on the product, this could cause damage. Assemble the item as close to its final position (in the same room) as possible. Assemble on a soft level surface to avoid damaging the unit or your floor. Parts of the assembly will be easier with 2 people. We do not recommend the use of power drills/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. Dispose all packaging carefully and responsibly. lue safety - Take care when using glue, please follow the advice below Skin contact: Remove contamination by washing with soap and water. This procedure should also be followed prior to eating and drinking. Eye contact: Rinse immediately with clean water for 15 minutes and seek medical advice. If swallowed: Seek medical advice immediately. Care and maintenance Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners. From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. (B) IMPORTANT, READ CAREFY - RETAIN FOR FTRE REFERENCE Current legislation requires that the bunkbed must be fitted with a ladder or platform for the upper bunk bed. The bunk bed meets the european EN 747-1:2007 standards for security and durability. WARNIN Mattress: This bed is designed to use a mattress size 200 cm long and 90 cm wide. The total thickness must not exceed 16.1 cm The label on the ladder side indicates maximum height of mattress to be used in this bed. Important: High beds and the upper bed of a bunk are not suitable for children under six years due to the risk of injury from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high bed. Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance between the top safety barrel and the wall shall not exceed 75 mm or shall be more than 230 mm. Note: if required the next page can be cut out and used as reference throughout the assembly. eep this page with these instructions for future reference.

3 3/ PART IST BOX A CODE COMPONENT QTY Front side rail 190x17,5x2 1 2 Back side rail 190x17,5x2 1 3 Side rail 190x17,5x2 1 4 Bottom back side rail 190x,5x2 1 5 Side rail 150x17,5x2 1 7 End rail 80,,5x2 2 8 eg 179x9x3,8 2 9 eg 179x9x3, adder side 185,8x9x2 2 Step 36x6,8x2,5 5 Support 40x,5x adder can be fitted right or left side 9 BOX B CODE COMPONENT QTY 6 End panel 80,46,5x1, arge desk top 0x64,1x1,6 1 BOX C CODE COMPONENT QTY 14 Slats 89,5x9x1,7 12 Components 1 Front side rail x1 (190x17,5x2 cm) 2 Back side rail x1 (190x17,5x2 cm) 3 Side rail x1 (190x17,5x2 cm)

4 4/ 4 Bottom back side rail x1 (190x,5x2 cm) 5 Side rail x1 (150x17,5x2 cm) 6 End panel x2 (80,46,5x1,9 cm) 7 End rail x2 (80,,5x2 cm) 8 eg x2 (179x9x3,8 cm) 9 eg x2 (179x9x3,8 cm) adder side x2 (185,8x9x2 cm) 12 Support x1 (40x,5x2 cm) Step x5 (36x6,8x2,5 cm) 13 arge desk top x1 (0x94,1x1,6 cm) 14 Slats x12 (89,5x9x1,7 cm)

5 5/ Tools needed (not supplied) 60 min A 8x40 x40 B 7x60 x4 C 7x50 x20 D 7x34 x4 E 15x12 x4 F 6,3x50 x2 6,3x70 x6 H D35 x4 J M6x40 x2 M6x75 x4 M6xx13 x4 N 55x12,5x5 x2 P 5x38 x4 Q 3,5x40 x24 R D4x13 x20 S D8x13 x5 T D15x18x3 x4 D15x18 x14 V D35x40 x4 X E E x1 Y x1 Z 6mm x1 M M6xx13Zn x E E 3xA E A 12 6 E 7 3xA A 8x40 x40

6 6/ 2 B 35 mm B 8 B D 9 D D D 7x34 x4 B 7x60 x4 3 H T H 6 H T E 9 V E E E V E 8 E V E 7 E 15x12 x4 H D35 x4 V D35x40 x4 T D15x18x3 x ,3x70 x4 M6x75 x2 M6xx13 x2

7 7/ 5 1 M6x75 M6xx13 x2 x2 6 Max.mattress height Always placed inside the ladder R C R C 7x50 x20 R D4x13 x20 C R C R C R C R C R C C R C R C R 7 Decide which side to attach ladder. ASSEMBIN ADDER EFT SIDE M 6mm M M6xx13Zn x2

8 8/ 8 5 F J 5 N N 6,3x70 x1 N 55x12,5x5 x2 F 6,3x50 x2 J M6x40 x2

9 9/ 9 24x Q NB! Q 3,5x40 x24 P P P P 13 P 12 6,3x70 x1 P 5x38 x4

10 / S S 3xS S 3xS S S D8x13 x5 D15x18 x14