FLIGHT. RThis popular OVERVIEW ELIGIBILITY SAFETY TIME LIMITS ATTIRE PROCEDURE

Size: px
Start display at page:

Download "FLIGHT. RThis popular OVERVIEW ELIGIBILITY SAFETY TIME LIMITS ATTIRE PROCEDURE"

Transcription

1 FLIGHT OVERVIEW Participants study the principles of flight and design in order to fabricate a glider that stays in flight for the greatest elapsed time. The glider must be designed to be launched from a catapult that is provided on site. The design process is documented in a portfolio that is submitted for evaluation. RThis popular event requires test phase pictures, flight logs, and a drawing. ELIGIBILITY Participants are limited to two (2) members per chapter, one (1) entry each. SAFETY Participants are required to provide and wear safety-approved eyewear during all phases of this event. Prescription eyewear will need to have side shields to be considered safety eyewear. Should a participant remove his/her eyewear during the event, s/he will be reminded once to replace it. If there is a second infraction, the participant will be disqualified and asked to leave the competition. TSA will not supply safety glasses. Students must be instructed by their teachers on the proper use of cyanoacrylate (CA) glue. TIME LIMITS A. Participants have ninety (90) minutes to construct a glider. B. Participants are given a maximum of thirty (30) minutes for trimming (test flights) of their glider. ATTIRE TSA competition attire, as described in the National TSA Dress Code section of this guide, is required. PROCEDURE A. Participants report to the event area at the time and place stated in the conference program with their metric technical drawing, portfolios, tools, and supplies. 175

2 B. Participants use their metric technical drawing to fabricate a glider. The technical drawing may be hand drawn using mechanical drawing instruments, or created using CAD. C. Participants may use templates, jigs, and fixtures for constructing the glider. D. Portfolios are evaluated. E. Participants have four (4) opportunities to fly their gliders for official times. The combined flight time of the best three (3) of the four (4) flights is used to determine the ten (10) finalists. RSafety glasses are a requirement for this event. Students without safety glasses are not allowed to participate. F. Launch procedures 1. Participants are called by their group timer to the designated launch area. 2. The timers give each participant a turn to fly his/her gliders. Participants must do all four (4) flights consecutively during their turn. 3. The glider is hooked to the rubber loop of the catapult provided by TSA, and the participant pulls the glider s shark tooth point back to the wooden stop in front of the 350mm stop block on the catapult. The altitude and angle of the catapult (with the glider on it) are determined by participants as the glider is launched. 4. The participant releases the glider after getting the OK from the official timer. 5. time begins when the glider is released and ends when the glider hits the floor or ground, or when it comes to rest on an obstruction. 6. One repair will be allowed after the individual time trials have begun. The repair must be made in three (3) minutes or less. No additional trimming will be allowed after the repair. 7. Each participant has the times of four (4) trial flights recorded by the timer. 8. Ties are broken by determining the longest single flight time. It is essential that students and advisors routinely check the TSA website ( for updated information about TSA general rules and competitive event guidelines. This information is found on the website under Competitions/ Competition Updates. When students participate in any TSA competitive event, they are responsible for knowing of all updates, changes, and clarifications related to that event. REGULATIONS A. Students are required to provide and wear safety eyewear for this event. 176

3 B. Documentation materials (comprising a "portfolio") are required and should be secured in a clear front report cover. (Click here for a sample.) The report cover must include the following singlesided, 8½" x 11" pages, in this order: 1. Title page with event title, conference city and state, the year, and the participant's ID number; one (1) page 2. Full-size metric technical drawing with dimensions of the glider to be built; 11" x 17" paper may be folded to fit in the sheet protector. 3. Pictures of two (2) test gliders will be included in the portfolio (participants are to submit only one (1) picture of each test glider, for a total of two (2) pictures). 4. log for each pictured test glider (see Log sample) 5. A graphic flow chart with picture and design principles used in building and adjusting gliders used for successful flights. C. Participants are not allowed to construct a glider without a completed technical drawing in their documentation portfolio. D. Technical drawing must: 1. be created using CAD, or hand-drawn with traditional mechanical drawing instruments 2. NOT be a freehand sketch 3. show all parts that make up the glider 4. show metric dimensions 5. be drawn to full scale 6. be drawn on a single sheet of paper no larger than 11" x 17" Log sample Glider #1 or Glider #2 (circle one) Dates: # Time aloft pattern Trim adjustment Advisor sign-off #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 177

4 RTools must fit inside the tool box, which must measure no more than twenty (20) inches (508 mm) length x ten (10) inches (254mm) width x ten (10) inches (254 mm) height. Participants should bring the tools needed and leave the rest behind. Transporting and checking in will be made simpler with a smaller and lighter tool box. RThis event requires the use of cyanoacrylate glue (best know as Super/ Krazy glue) instead of aliphatic resin glue. Participants should practice with this material before the conference! E. Participants are required to provide their own tool box (with identification [school name, address, and advisor cell phone number]), which is not to exceed twenty (20) inches (508 mm) length x ten (10) inches (254 mm) width x ten (10) inches (254 mm) height. The box must contain all items needed to fabricate the solution. Participants are not permitted to share toolboxes. The following is a suggested list: 1. Cutting devices; NONE may be electric 2. Adhesives a. aerosol and electric applicators are not allowed b. a bottle of Uncure or Debonder is recommended c. a single two (2)-ounce bottle of accelerant (pump or drip) is permitted 3. Temporary fastening devices a. straight pins b. clamps c. tape 4. A cutting surface that prevents table-top marring (required) 5. Rulers, straightedges, and/or measuring scales 6. Abrasives sheets, sponges, boards 7. Marking devices (pens, pencils, etc.) and sharpener 8. Sheet of wax paper, as large as is needed for the competition (required) 9. Safety glasses, as required F. Materials (SUPPLIED BY THE PARTICIPANT) (Participants may have only one [1] of each wooden part. Extra wooden parts will not be allowed, therefore wood should be chosen carefully.) 1. Balsa and/or basswood plus ballast material a. fuselage blank, 3mm (⅛") thick x 13mm (½") wide x 300mm (11⅞") long b. wing blank, 1.5mm (1/16") thick x 77mm (3") wide x 300mm (11⅞") long c. stabilizer and fin blank,.75mm (1/32") thick x 51mm (2") wide x 150mm (5⅞") long d. wooden shark s tooth hook, 3mm (⅛") thick x 6.5mm (¼") wide x 20mm (¾") long, glued to the bottom of the fuselage; a shark s tooth cut into the fuselage will also be permitted. 178

5 G. Tolerances are as follows: 1. Fuselage: 298mm to 300mm long 2. Shark s tooth hook: 18mm to 20mm long x 6mm wide RNote! Participants must provide and bring their own tool box and building materials to the event site. H. Catapult specifications (to be used for trim and experimentation at home, school, and during preparation prior to time trial flights): 1. Catapults for timed flights at the national event site are supplied by TSA. Participants who prefer, may use their own catapults during trim flights. During time trial flights, ONLY catapults provided by TSA may be used. 2. Catapults are made from hardwood or plywood. 3. Catapult wooden stick dimensions: laminate a piece of wood (10mm thick x 45mm wide x 700mm long) to a second piece of wood (6mm thick x 45mm wide x 350mm long), aligning the pieces at the handle end and gluing them face-to-face (see drawing). 4. The handle is 20mm thick x 30mm wide x 150mm long and is attached by screws to a 15mm thick x 30mm wide x 75mm long block using a middle-lap joint. The 75mm long block then is screwed to the laminated main catapult stick beginning at 400mm from the muzzle end. 5. The rubber loop is a #19 rubber band 3½" x 1 /16" threaded through the screw eye of the launcher. Rubber bands are available in bulk from office suppliers such as Office Max, Office Depot, and Staples. 6. The screw eye is attached to the center of the 15mm thick x 15mm wide x 45mm long wooden block connected to the underside of the muzzle end of the catapult. I. Templates, jigs, and fixtures that MAY be used in constructing gliders (these are to help facilitate fast and accurate construction): 1. Templates, jigs, and fixtures must be developed and built by students. 2. Storage container All student-made items must fit in a box not exceeding 254mm high x 254mm wide x 508mm long. 179

6 3. Sanding blocks These may have two (2) grits affixed to the top and bottom; grits are chosen by the student. 4. Traction plate with sandpaper (150mm x 300mm maximum) attached to a thin piece of rigid material, i.e., plywood, foam core board, press board, cardboard, plastic, etc. 5. Dihedral fixture This is an all-wood apparatus that assists in sanding the critical dihedral joints and secures the model as the glue dries to ensure a precise prototype. CATAPULT DRAWING Muzzle end EVALUATION Evaluation is based on points earned for the quality of the documentation portfolio and the accumulated flying time of three (3) trials. Please refer to the official rating form for more information. 180

7 STEM INTEGRATION This event has connections to the STEM areas noted below. Please refer to the STEM INTEGRATION section of this guide. Science, Technology, Engineering, Mathematics COMMON CORE STATE STANDARDS (CCSS) INTEGRATION Please refer to the Common Core State Standards (CCSS) Integration section of this guide for more information. LEADERSHIP SKILLS Leadership skills promoted in this event: Decision making: Students decide the most effective fly glider design. Use leadership activities: Banking on It and The Store Evaluation: Students understand tradeoffs, keep a flight log, and evaluate the design. Use leadership activities: Finish Line to Start Line and Grading the Advertisement Problem solving: Students repair and trim the glider. Use leadership activities: Finding a Way and Resolving Conflict Additional leadership skills promoted in this event: Communication Creative thinking Critical thinking TSA AND CAREERS This competition has connections to one or more of the career areas featured in the TSA AND CAREERS section of this guide. Use The 16 Career Clusters chart and the TSA Competitions and Career Clusters grid as resources for information about careers. CAREERS RELATED TO THIS EVENT Aeronautical engineer Aircraft systems engineer Physics instructor 181

8 FLIGHT EVENT COORDINATOR INSTRUCTIONS PERSONNEL A. Event coordinator B. Evaluators, two (2) or more C. Assistants, two (2) or more D. Timekeepers, two (2) or more MATERIALS A. Coordinator s packet, containing 1. Event guidelines, one (1) copy for the coordinator and each evaluator/assistant 2. TSA Event Coordinator Report 3. List of evaluators/assistants 4. Stopwatches, two (2) or more 5. Results envelope with coordinator forms B. Other supplies 1. Measuring scales 2. First aid kit with strip bandages and debonder 3. Catapults, five (5) 4. #19 rubber bands 5. Metric rulers RESPONSIBILITIES A. Upon arrival at the conference, report to the CRC room and check the contents of the coordinator s packet. Review the event guidelines and check to see that enough evaluators/ assistants have been scheduled. B. Inspect the area(s) in which the event is to be held for appropriate set-up, including room size, chairs, tables, outlets, etc. Notify the event manager of any potential problems. C. One (1) hour before the event is scheduled to begin, meet with evaluators/assistants to review time limits, procedures, and regulations. If questions arise that cannot be answered, speak to the event manager before the event begins. 182

9 D. For participants who violate the rules, the decision either to 1) deduct twenty percent (20%) of the total points earned or 2) disqualify the entry, must be discussed and verified with the evaluators, event coordinator, and CRC manager, who all must initial either of these actions on the rating form. E. Check in participants at the time stated in the conference program. F. Check each documentation portfolio for the sketch; check each toolbox for allowed items (including safety glasses, cutting board, and wax paper) and for appropriate size. G. Distribute the list of entrants assigned to each designated evaluator/timer. H. After the gliders have been constructed, secure the holding area so that the gliders and documentation portfolios remain safe until the scheduled time for trimming. I. Designate times for test flying/trimming and communicate the thirty (30)-minute segment scheduled for each group of participants. J. Designate times for groups to make four (4) official flights for time. K. Timed flight procedure 1. Each flight time is recorded to the nearest one hundredth (.01) of a second. 2. After the fourth flight, the top three (3) flight times are added together, then multiplied by three (3) to obtain the total flight score; each glider is placed with its documentation portfolio. 3. Three (3) groups may fly simultaneously in the assigned area for the event, with consideration for the safety of gliders and participants. L. Documentation portfolios are judged. M. Evaluators determine the ten (10) finalists. Through the discussion process, the evaluators break any ties that affect the top three (3) placements. N. Submit the finalist results and all related forms in the results envelope to the CRC room. O. If necessary, manage security and the removal of materials from the event area. 183

10 Participant/Team ID# FLIGHT 2016 & 2017 OFFICIAL RATING FORM MIDDLE SCHOOL Safety glasses must be worn for all phases of this competition. Should a participant remove his/her eyewear during the event, s/he will be reminded once to replace the eyewear. If there is a second infraction, the participant will be disqualified. Documentation (60 points) Safety glasses warning Safety glasses disqualification Minimal performance Adequate performance Exemplary performance CRITERIA 1-4 points 5-8 points 9-10 points Evaluators: Using minimal (1-4 points), adequate (5-8 points), or exemplary (9-10 points) performance levels as a guideline, record the scores earned for the event criteria in the column spaces to the right. The X1 or X2 notation in the criteria column is a multiplier factor for determining the points earned. (Example: an adequate score of 7 for an X1 criterion = 7 points; an adequate score of 7 for an X2 criterion = 14 points.) Portfolio (X1) Full scale technical drawing (X1) Technical drawing/built glider correlation (X1) Test glider pictures (X1) logs (X2) Portfolio is unorganized and/ or missing three or more components. Technical drawing is missing two or more components; parts of the glider are not shown; non-metric dimensioning is used; technical drawing is not drawn to full scale and/or is on paper larger than 11"x17", and/or it is sloppy. Glider built for the competition does not match the technical drawing in dimensions or appearance; glider is not designed/built properly for the event. One test glider photo is missing, and or pictures are not clearly visible, and/or they lack definition/ detail of each glider. One flight log is missing, and/or the logs are incomplete, and/or advisor signature is not included. Portfolio may be missing up to two components; it is mostly organized. Technical drawing may be missing one component; the technical drawing is largely correct and neatly completed. Glider is similar to the technical drawing within a tolerance of 5mm; glider is designed correctly to fly in the competition. Pictures of both test gliders are included; each picture is clearly visible, but pictures provide only adequate definition and/or detail. Both logs are included and they are generally complete. All components are included in the portfolio, and content and organization are clearly evident. All components are included in the technical drawing and the drawing is correctly and neatly completed. Glider is within a tolerance of 2mm of the technical drawing; glider is constructed exactly as the technical drawing illustrates. Both test glider pictures include significant details and annotations about each glider; clearly visible pictures are defined. Both logs are included and are complete, with a thorough understanding of a flight log s purpose as a flight aid. Record scores in the column spaces below. SUBTOTAL (60 points) 184

11 s (recorded to the nearest one hundredth [.01] of a second) Duration of flight #1 Duration of flight #2 Duration of flight #3 Duration of flight #4 Seconds Seconds Seconds Seconds The flight duration times of the three (3) longest flights are added, then multiplied by three (3) to obtain the subtotal flight score. SUBTOTAL Score Rules violations (a deduction of 20% of the total points earned) must be initialed by the evaluator, coordinator and manager of the event. Record the deduction in the space to the right. Indicate the rule violated: (To arrive at the TOTAL score, add any subtotals and subtract rules violation points, as necessary.) TOTAL Comments: I certify these results to be true and accurate to the best of my knowledge. Evaluator Printed name: Signature: 185

ATTIRE AND SAFETY EYEWEAR

ATTIRE AND SAFETY EYEWEAR FLIGHT RThis popular event requires test phase pictures, flight logs, and a drawing. OVERVIEW Participants study the principles of flight and design in order to fabricate and test fly gliders. CHALLENGE

More information

An individual LEAP Response is required for this event and must be submitted at event check-in (see LEAP Program).

An individual LEAP Response is required for this event and must be submitted at event check-in (see LEAP Program). FLIGHT OVERVIEW Participants study the principles of flight and design in order to fabricate a glider that stays in flight for the greatest elapsed time. The glider must be designed to be launched from

More information

FLIGHT ENDURANCE. Participants analyze flight principles with rubber band powered model aircraft.

FLIGHT ENDURANCE. Participants analyze flight principles with rubber band powered model aircraft. Page 1 of 5 OVERVIEW Participants analyze flight principles with rubber band powered model aircraft. PURPOSE The Flight Endurance event requires participants to build, fly, and adjust (trim) a model to

More information

LEAP LEADERSHIP RESUME/INTERVIEW

LEAP LEADERSHIP RESUME/INTERVIEW FLIGHT ENDURANCE OVERVIEW Participants analyze flight principles with a rubber band-powered model aircraft. Participants have the opportunity to build, fly, and adjust (trim) a model to make long endurance

More information

MESA DAY CONTEST RULES (Revised 12/7/17)

MESA DAY CONTEST RULES (Revised 12/7/17) LEVEL: Grades 9 12 MESA DAY CONTEST RULES 2017-2018 (Revised 12/7/17) Wright Turn Glider Competition TYPE OF CONTEST COMPOSITION OF TEAM NUMBER OF TEAMS SPONSOR: OVERVIEW: Team 2-3 students per team 9

More information

MESA DAY CONTEST RULES

MESA DAY CONTEST RULES LEVEL: Grades 6-8 Wright Stuff Glider Competition MESA DAY CONTEST RULES 2017-2018 TYPE OF CONTEST COMPOSITION OF TEAM NUMBER OF TEAMS SPONSOR: OVERVIEW: Individual/Team 2-3 students per team 6TH; 2-3

More information

Wright Stuff Glider Competition

Wright Stuff Glider Competition MESA DAY CONTEST RULES 2018 2019 (Version 9.13.18) Wright Stuff Glider Competition LEVEL: Grades 6 and 7/8 TYPE OF CONTEST: COMPOSITION OF TEAM: NUMBER OF TEAMS: Team 2-3 students per team Preliminary

More information

University of Colorado, Colorado Springs Mechanical & Aerospace Engineering Department. MAE 4415/5415 Project #1 Glider Design. Due: March 11, 2008

University of Colorado, Colorado Springs Mechanical & Aerospace Engineering Department. MAE 4415/5415 Project #1 Glider Design. Due: March 11, 2008 University of Colorado, Colorado Springs Mechanical & Aerospace Engineering Department MAE 4415/5415 Project #1 Glider Design Due: March 11, 2008 MATERIALS Each student glider must be able to be made from

More information

The Boeing Company and NSBE * 2018 Boeing Flight Competition Guidelines *

The Boeing Company and NSBE * 2018 Boeing Flight Competition Guidelines * The Boeing Company and NSBE * 2018 Boeing Flight Competition Guidelines * Flight Competition details Glider Construction What materials can be used What requirements must be met Examples of Typical Launch

More information

Professional Installation Guidelines LVT with Roll-out Loop over LocPlate products. Required Tools

Professional Installation Guidelines LVT with Roll-out Loop over LocPlate products. Required Tools Professional Installation Guidelines LVT with Roll-out Loop over LocPlate products Required Tools Utility Knife Hook Blade Knife Chalk Line Poly Sheeting Measuring Tape Straight Edge 75 lb Roller TacFast

More information

SILENT MODEL WAR WINGS

SILENT MODEL WAR WINGS A Stinson 0-49 tows an army glider, not full scale, just models. The glider is shown below SILENT MODEL WAR WINGS Building a high efficiency model of Uncle Sam's latest training glider by EARL STAHL THE

More information

FLY THE "MISSING" LINK

FLY THE MISSING LINK FLY THE "MISSING" LINK A simply constructed class E towline soaring model that makes high performance possible for the beginner by, GEORGE BROWN The author with his model before the record flight THIS

More information

Installation Guide Cable

Installation Guide Cable Installation Guide Cable Thank you for selecting a DuctSox System. This guide will be helpful for the installation of a Cable System. Sections of fabric will be labeled, assembled, bagged, and boxed for

More information

China Aeromodelling Design Challenge. Contest Rules China Aeromodelling Design Challenge Page 1 of 14

China Aeromodelling Design Challenge. Contest Rules China Aeromodelling Design Challenge Page 1 of 14 China Aeromodelling Design Challenge Contest Rules 2014 Page 1 of 14 LIST OF CONTENTS I VTOL AIR CARGO RACE... 3 1 OBJECTIVES... 3 2 REGISTRATION ELIGIBILITIES... 3 3 AIRCRAFT CONFIGURATIONS... 3 4 SITE

More information

The second change is that the ball needs to remain in contact with the track at all times.

The second change is that the ball needs to remain in contact with the track at all times. Notes regarding the 2018 grading changes The volunteer judges from the American Coaster Enthusiasts (ACE) have made changes to the grading of the Show Us Your Coaster contest for 2018, in hopes that the

More information

Insert Chapter/Page No.

Insert Chapter/Page No. HARTZELL PROPELLER INC. One Propeller Place Piqua, Ohio 45356-2634 U.S.A. Telephone: 937.778.4200 Fax: 937.778.4215 MANUAL REVISION TRANSMITTAL MANUAL (61-13-70) Composite Propeller Blade Field Maintenance

More information

Duration: 2-15 minutes Institution: SMM Skill level/age Level: Grades K-12 Group size: Individual

Duration: 2-15 minutes Institution: SMM Skill level/age Level: Grades K-12 Group size: Individual PTEROSAUR GLIDERS Duration: 2-15 minutes Institution: SMM Skill level/age Level: Grades K-12 Group size: Individual INTRODUCTION Pterosaur Paper Glider is a fun activity that allows visitors to play with

More information

3D Printed Glider instructions

3D Printed Glider instructions 3D Printed Glider instructions For more cool designs, check out threedsy.com! Printing Instructions: ABS or PET is preferred for durability. Bed must be leveled and printer adjusted to produce good single

More information

Butler Personnel Parachute Systems, LLC

Butler Personnel Parachute Systems, LLC Butler Personnel Parachute Systems, LLC 1820 Loudon Avenue NW PO Box 6098 Roanoke, VA 24017-0098 (540) 342-2501 (540) 342-4037 (FAX) Info@butlerparachutes.com Butler Personnel Parachute Systems Back Pack

More information

IMPETUS: Engineering Workbook Model Roller Coaster Competition

IMPETUS: Engineering Workbook Model Roller Coaster Competition IMPETUS: Engineering Workbook Model Roller Coaster Competition School and Team Information This information can be completed at any time before the roller coaster competition School Name: Coach s Name:

More information

Table of Contents. Introduction to the AquaTrak AquaTrak Parts List Tank Frame Assembly Pulley System Assembly...

Table of Contents. Introduction to the AquaTrak AquaTrak Parts List Tank Frame Assembly Pulley System Assembly... 56679 V0309 Table of Contents Introduction to the AquaTrak................................................... 2 AquaTrak Parts List... 3 Tank Frame Assembly... 4 Pulley System Assembly... 6 AquaTrak Maintenance...10

More information

Mini-Condor. Mini-Condor. (Competition Boost Glider for 1/2A & A motors) Shock Cord Anchor Pattern. Kit # Skill Level 3: Average Skills Needed

Mini-Condor. Mini-Condor. (Competition Boost Glider for 1/2A & A motors) Shock Cord Anchor Pattern. Kit # Skill Level 3: Average Skills Needed Mini-Condor Kit #05008 Mini-Condor (Competition Boost Glider for 1/2A & A motors) P/N Description Qty 10058 AT-13/9.0 Body Tube 1 13020 CR 10-13 Green Engine Block 1 13051 1/8 Launch Lug 1 Long 1 15578

More information

Storybook Theme Park Ride

Storybook Theme Park Ride Storybook Theme Park Ride Level: Elementary School Type of Contest: Team Composition of Team: 2 4 students per team Number of Teams: One entry per school Next Generation Science Standards: 3-5-ETS1-1.,

More information

Contents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings

Contents. Awnings USA - Full Protective Hood Manual Instructions ft 11 - 11ft 6 Awnings Awnings USA - Full Protective Hood Manual Instructions Contents Warning We recommend that two or more people are required to lift the awning into place. 4ft 11" - 11ft 6" Awnings 8 x Expansion bolts **

More information

Swift. Additional Items You Will Need * Wood Glue * UHU Por or Foam safe glue

Swift. Additional Items You Will Need * Wood Glue * UHU Por or Foam safe glue Swift Included in Kit * Pre- cut balsa and Depron parts * Ballast weights * Diagram sheet * Sandpaper sheet * Rubber bands * Plastic wing bracing parts Additional Items You Will Need * Wood Glue * UHU

More information

Solar Power Shade INSTRUCTION MANUAL

Solar Power Shade INSTRUCTION MANUAL INSTRUCTION MANUAL 20 June 2006, Revision Initial Release 26 September 2006, version 2 Powerfilm, Inc. 2337 230th Street Ames, IA 50014 (515) 292-7606 Web Site: www.powerfilmsolar.com Table of Contents

More information

Control Line Special Events

Control Line Special Events Control Line Special Events 2017-2018 RULES GOVERNING MODEL AVIATION COMPETITION IN THE UNITED STATES Amendment Listing Amendment Topic Publication Date Description Original Issue 1/1/2015 Publication

More information

AERONAUTICS An Educator s Guide with Activities in Science, Mathematics, and Technology Education National Aeronautics and Space Administration

AERONAUTICS An Educator s Guide with Activities in Science, Mathematics, and Technology Education National Aeronautics and Space Administration AERONAUTICS An Educator s Guide with Activities in Science, Mathematics, and Technology Education National Aeronautics and Space Administration Objective The students will: Learn how to change the flight

More information

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO C WATCH HOW IT S MADE SEGMENTS PREPARATION

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO C WATCH HOW IT S MADE SEGMENTS PREPARATION ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO C170.01 WATCH HOW IT S MADE SEGMENTS Total Time: 60 min PREPARATION PRE-LESSON INSTRUCTIONS Resources needed for the delivery

More information

High School Lesson Glider Design

High School Lesson Glider Design High School Lesson Glider Design Description Glider Design is the production of gliding products without the use of engines as demonstrated by the NASA space shuttle s return to the Earth s surface after

More information

MEASUREMENT OF ACCELERATION Pre-Lab. Name: Roster#

MEASUREMENT OF ACCELERATION Pre-Lab. Name: Roster# MEASUREMENT OF ACCELERATION Pre-Lab Name: Roster# Date: 1. A tree is 15.0 m high and cast a shadow along the ground that is 30.0 m long. Draw a triangle that represents this situation. What angle does

More information

PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY

PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY PEAK 1 GENERAL INFORMATION 1.1 THE CONCEPT 1.2 SAFETY 1.3 THE SPEED SYSTEM 2 THE EMERGENCY PARACHUTE 2.1 EMERGENCY PARACHUTE ASSEMBLY 3 ADJUSTING YOUR PEAK 3.1 ADJUSTING THE SITTING POSITION 3.2 ADJUSTING

More information

Title ID Number Sequence and Duration. Age Level Essential Question Learning Objectives

Title ID Number Sequence and Duration. Age Level Essential Question Learning Objectives Title ID Number Sequence and Duration Age Level Essential Question Learning Objectives Lesson Activity Design a Roller Coaster (2 sessions, 60-80 minutes) HS-S-C3 Session 1: Background and Planning Lead

More information

Kings Dominion Coaster Mania Building Contest 2017

Kings Dominion Coaster Mania Building Contest 2017 Updated 1/28/17 1 Kings Dominion Coaster Mania Building Contest 2017 Kings Dominion is proud to introduce our Annual Roller Coaster Building Contest in conjunction with the 2017 Education Days to be held

More information

Lab Skills: Introduction to the Air Track

Lab Skills: Introduction to the Air Track Lab Skills: Introduction to the Air Track 1 What is an air track? An air track is an experimental apparatus that allows the study of motion with minimal interference by frictional forces. It consist of

More information

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR Installation & Maintenance LISTED Tested to *UL 103HT & ULC-S641 Instructions MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR

More information

INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V

INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V 2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V 2012, Balco, Inc. INSTALLATION

More information

TUTORIAL WATER ROCKET GLIDER

TUTORIAL WATER ROCKET GLIDER TUTORIAL WATER ROCKET GLIDER 1. What is a Water Rocket glider? Water Rocket glider is a rocket-cum-glider that uses water as a propellant and then glides in air. It gets its thrust from water. This thrust

More information

General Canopy Folding and Packing Instructions for H-X Series Personnel Parachute Canopies. Manufactured by Butler Parachute Systems, Inc.

General Canopy Folding and Packing Instructions for H-X Series Personnel Parachute Canopies. Manufactured by Butler Parachute Systems, Inc. General Canopy Folding and Packing Instructions for H-X Series Personnel Parachute Canopies Manufactured by Butler Parachute Systems, Inc. Issued 24 July 1998 This set of instructions is for the routine

More information

Coaster Creators. Science/Math Module. Grades 6-8

Coaster Creators. Science/Math Module. Grades 6-8 Science/Math Module Grades 6-8 By Virginia Barrett MAP Team Member Lathrop R-II School District Northwest Regional MAP Center 1 Purpose: This module can be used as the culminating activity for a unit of

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 56-20: CABIN GENERAL. Cabin 56-20: CABIN. 1. General

CIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 56-20: CABIN GENERAL. Cabin 56-20: CABIN. 1. General CIRRUS AIRPLANE MAINTENANCE MANUAL Cabin CHAPTER 56-20: CABIN GENERAL 56-20: CABIN 1. General The aft passenger windows are manufactured of acrylic and adhesive bonded to the fuselage. Replacement is accomplished

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL

CIRRUS AIRPLANE MAINTENANCE MANUAL CABIN 1. GENERAL The aft passenger windows are manufactured of acrylic and adhesive bonded to the fuselage. Replacement is accomplished by removing the interior trim around the window, removing the sealant

More information

TEAM AMERICA ROCKETRY CHALLENGE 2017 RULES

TEAM AMERICA ROCKETRY CHALLENGE 2017 RULES FED. SUPPLY CLASS NONE TEAM AMERICA ROCKETRY CHALLENGE 2017 RULES www.aia-nas.org ISSUE DATE: SEPTEMBER 2002 DATE: MAY 9, 20 THIRD ANGLE PROJECTION CUSTODIAN NATIONAL ASSOCIATION OF ROCKETRY 17 PROCUREMENT

More information

Materials MOTION, FORCE, AND MODELS. Contents. NOTE Delta Education Customer Service can be reached at

Materials MOTION, FORCE, AND MODELS. Contents. NOTE Delta Education Customer Service can be reached at MOTION, FORCE, AND MODELS Materials Contents Introduction... 39 Kit Inventory List... 40 Materials Supplied by the Teacher... 42 Preparing a New Kit... 44 Preparing the Kit for Your Classroom... 46 Care,

More information

Model Roller Coaster Contest 2017

Model Roller Coaster Contest 2017 Model Roller Coaster Contest 2017 California s Great America is proud to offer you and your group, entry into this year s Model Roller Coaster Contest. To find out how you and your school can enter this

More information

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly

More information

Suggested Installation Instructions for: , Embroidered Front End Mask

Suggested Installation Instructions for: , Embroidered Front End Mask I I 1 Suggested Installation Instructions for: 602-246, 1975-1979 Embroidered Front End Mask 2-Cover Hooks 4-Air Foil Inserts 2-2" "U" Shaped Trim Locks 4-2" ADHESIVE BACKED Hook Strips 2-14" ADHESIVE

More information

1. APPLY FOR YOUR VISA

1. APPLY FOR YOUR VISA Next Steps Guide Checklist: Apply for your visa Submit your arrival information Complete health + immunization forms Arrive on campus! Current, valid passport One photograph 1. APPLY FOR YOUR VISA Welcome

More information

Hammer, Discus, Shot Put, Javelin

Hammer, Discus, Shot Put, Javelin Hammer, Discus, Shot Put, Javelin Competition Aluminium Discus And Hammer Cage 7/10 M Order No. 30290 Order No. 30290 D (Double Net) Order No. 30290 DS (Dismantle to fit a 20 container) Competition aluminium

More information

AERO TEC LABORATORIES

AERO TEC LABORATORIES IMPORTANT INFORMATION FROM ATL SAFETY FUEL CELLS FOR HISTORIC RACE CARS, CLASSIC BOATS AND VINTAGE AIRCRAFT 1.) REPLACING AN OLD OR DETERIORATED FUEL BLADDER a.) Remember, modern fuel bladder materials

More information

SURVEILLANCE CHECK LIST RENEWAL OF CERTIFICATE OF AIRWORTHINESS (GLIDER) S/N ITEMS OF INSPECTION SAT/UNSAT SIGNATURE

SURVEILLANCE CHECK LIST RENEWAL OF CERTIFICATE OF AIRWORTHINESS (GLIDER) S/N ITEMS OF INSPECTION SAT/UNSAT SIGNATURE SURVEILLANCE CHECK LIST RENEWAL OF CERTIFICATE OF AIRWORTHINESS (GLIDER) Registration No.: Type of Glider: Whether Metal or Wooden: Date of Manufacture: Name of owner/ operator: C of A valid till: Place

More information

Egg-streme Parachuting Flinn STEM Design Challenge

Egg-streme Parachuting Flinn STEM Design Challenge Egg-streme Parachuting Flinn STEM Design Challenge 6 07, Flinn Scientific, Inc. All Rights Reserved. Reproduced for one-time use with permission from Flinn Scientific, Inc. Batavia, Illinois, U.S.A. No

More information

Butler Personnel Parachutes

Butler Personnel Parachutes Butler Personnel Parachutes Chest Pack Emergency Parachute System Assembly and Packing Instructions Use this manual with: General Folding and Packing Instructions for the HX & Lopo Series Canopies General

More information

Activity 2 let Your Dreams Soar

Activity 2 let Your Dreams Soar the law of Conservation of Energy, which states that energy is neither created nor destroyed; it is simply transferred or changes from one form to another. Explain that catapults also demonstrate Newton

More information

Hammer, Discus, Shot Put, Javelin

Hammer, Discus, Shot Put, Javelin Hammer, Discus, Shot Put, Javelin Competition Aluminium Discus And Hammer Cage 7/10 M The competition aluminium discus and hammer cage is made from extra sturdy aluminium profiles. The profile measures

More information

Primrose Awnings - Standard Manual Instructions

Primrose Awnings - Standard Manual Instructions Primrose Awnings - Standard Manual Instructions Contents Warning 1.5m - 3.0m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning 1 x Winder handle 3.5m - 4m Awnings 6 x Expansion bolts

More information

ESTES INDUSTRIES 1295 H Street Penrose, CO PRINTED IN CHINA BLACK ENGINE HOOK RETAINER RING (1) (30160) KEY

ESTES INDUSTRIES 1295 H Street Penrose, CO PRINTED IN CHINA BLACK ENGINE HOOK RETAINER RING (1) (30160) KEY COUNTDOWN AND LAUNCH #2190 www.estesrockets.com KEY ALWAYS OUT UNTIL FINAL COUNTDOWN! 1... 10" (25.4 cm) 2... 3... ESTES INDUSTRIES 1295 H Street Penrose, CO 81240 PRINTED IN CHINA TIP: Read all instructions

More information

2018 RULES TEAM AMERICA ROCKETRY CHALLENGE

2018 RULES TEAM AMERICA ROCKETRY CHALLENGE COPYRIGHT 2017. ALL RIGHTS RESERVED FED. SUPPLY CLASS NONE 20 RULES TEAM AMERICA ROCKETRY CHALLENGE DATE. www.aia-nas.org ISSUE DATE: SEPTEMBER 2002 DATE: MAY 13, 2017 THIRD ANGLE PROJECTION CUSTODIAN

More information

K SIGNAGE & TRAFFIC CONTROL. Table of Contents

K SIGNAGE & TRAFFIC CONTROL. Table of Contents Table of Contents K1. ACCOMMODATION OF TRAFFIC... 1 K2. MINIMUM CONSTRUCTION SIGNING... 1 K3. SUBDIVISION SIGNS... 2 K4. TRAFFIC CONTROL DEVICES... 2 K4.1 Traffic Signs Regulations... 2 K4.2 Materials...

More information

Aeronautics Math. Douglas Anderson Arellanes Junior High School Santa Maria-Bonita School District

Aeronautics Math. Douglas Anderson Arellanes Junior High School Santa Maria-Bonita School District Aeronautics Math Douglas Anderson Arellanes Junior High School Santa Maria-Bonita School District Description: We will review aircraft weight and balance and use our knowledge of equations to determine

More information

OPERATING DIRECTIVE Number: D Aviation Authority Revised: 03/25/15

OPERATING DIRECTIVE Number: D Aviation Authority Revised: 03/25/15 Page: 1 of 10 PURPOSE: To maintain the aesthetics of the airport by establishing standards and procedures to be followed by tenants concerning approval of and placement of tenant related displays, signs,

More information

Butler Tactical Parachute Systems, LLC

Butler Tactical Parachute Systems, LLC Butler Tactical Parachute Systems, LLC A division of Butler Parachute Systems Group, Inc. TT-600 TETHERED TANDEM BUNDLE DELIVERY SYSTEM ASSEMBLY MANUAL (Revision A) Page 1 of 40 INTRODUCTION This manual

More information

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR

MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR Installation & Maintenance LISTED Tested to *UL 103HT & ULC-S641 Instructions MODEL DCC DOUBLE WALL CHIMNEY CONNECTOR A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR

More information

SOLHARO ASSEMBLY & INSTALLATION INSTRUCT IONS

SOLHARO ASSEMBLY & INSTALLATION INSTRUCT IONS A. Introduction: SOLHARO ASSEMBLY & INSTALLATION INSTRUCT IONS Rev. 01/30/2012 The Solharo is an external, retractable, tensioned sun shading system designed to fit over a sunroom or wood pergola. The

More information

o " tar get v moving moving &

o  tar get v moving moving & Introduction You have a summer job at Amtrak with a group examining the crash between two trains. Your supervisor wants you to calculate the results of two different cases. The first is a perfectly inelastic

More information

Butler Tactical Parachute Systems, LLC TT-600 TETHERED TANDEM BUNDLE DELIVERY SYSTEM. ASSEMBLY MANUAL (Revision D) 18 FEB 2009

Butler Tactical Parachute Systems, LLC TT-600 TETHERED TANDEM BUNDLE DELIVERY SYSTEM. ASSEMBLY MANUAL (Revision D) 18 FEB 2009 Butler Tactical Parachute Systems, LLC A division of Butler Parachute Systems Group, Inc. TT-600 TETHERED TANDEM BUNDLE DELIVERY SYSTEM ASSEMBLY MANUAL (Revision D) 18 FEB 2009 Page 1 of 42 INTRODUCTION

More information

Installation Instructions Traditional Awnings in a box Classic Awnings in a Box

Installation Instructions Traditional Awnings in a box Classic Awnings in a Box Installation Instructions Traditional Awnings in a box Classic Awnings in a Box Basic Tools Required (not included) Tape Measure & Pencil Level Phillips Screwdriver Drill with ¼ bit (Cement or Masonry

More information

JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING

JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING 2014 Pella Corporation JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING For Additional Mullion Assembly Information; Visit www.installpella.com/mullions,

More information

RIGGING & TRADESHOW SUSPENSION APPLICATIONS

RIGGING & TRADESHOW SUSPENSION APPLICATIONS RIGGING & TRADESHOW SUSPENSION APPLICATIONS VOLUME VI 1 GRIPLOCK SYSTEMS Griplock Systems has been providing manufacturers and contractors with the world s highest quality and most reliable cable suspension

More information

TEAM AMERICA ROCKETRY CHALLENGE 2014 EVENT RULES

TEAM AMERICA ROCKETRY CHALLENGE 2014 EVENT RULES COPYRIGHT 2013. ALL RIGHTS RESERVED FED. SUPPLY CLASS NONE TEAM AMERICA ROCKETRY CHALLENGE 2014 EVENT RULES www.aia-nas.org ISSUE DATE: SEPTEMBER 2002 DATE: MAY, 2013 THIRD ANGLE PROJECTION CUSTODIAN NATIONAL

More information

Provided by TryEngineering -

Provided by TryEngineering - Take F lig ht! Provided by TryEngineering - www.tryengineering.org L e s s o n F o c u s Lesson focuses on flight and how the design of a glider will improve aerodynamic function. Teams of students explore

More information

User s Manual Trampoline 8

User s Manual Trampoline 8 User s Manual Trampoline 8 Model! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 17 lbs. ASSEMBLY IMPORTANT

More information

Primrose Awnings - Full Cassette Manual & Electric Instructions

Primrose Awnings - Full Cassette Manual & Electric Instructions Primrose Awnings - Full Cassette Manual & Electric Instructions Contents Warning 2.0m - 3.5m Awnings 8 x Expansion bolts ** 2 x brackets 1 x Awning 1 x Winder 4.0m - 5.0m Awnings 12 x Expansion bolts **

More information

Installation and Maintenance Manual

Installation and Maintenance Manual Freestanding Gas Stove MODEL: PGS2005 GPEBB20R GPEBW20R Installation and Maintenance Manual Warning Maintenance products should be carried out by professional and technical personnel with relevant qualification,

More information

INSTALLATION GUIDE INTRODUCTION

INSTALLATION GUIDE INTRODUCTION INSTALLATION GUIDE for for HotEdge Rail Rail INTRODUCTION HotEdge Rail is a patent pending one-piece roof edge ice melt systems engineered to easily install on standing seam, pro panel, and corrugated

More information

USER MANUAL CONTENTS. Please read this carefully before doing anything with your new container system

USER MANUAL CONTENTS. Please read this carefully before doing anything with your new container system USER MANUAL CONGRATULATIONS ON YOUR PURCHASE OF A SQUIRREL CRUX ( PRODUCT ). BY PURCHASING THIS PRODUCT, YOU ACKNOWLEDGE THAT ENGAGING IN SKY-DIVING, BASE JUMPING, PARACHUTING, AND WINGSUITING IS AN INHERENTLY

More information

THE SOCIETY OF EXPERIMENTAL TEST PILOTS STANDARD OPERATING PROCEDURES

THE SOCIETY OF EXPERIMENTAL TEST PILOTS STANDARD OPERATING PROCEDURES THE SOCIETY OF EXPERIMENTAL TEST PILOTS STANDARD OPERATING PROCEDURES SOP 4-4 DATE 2-16-72 REV 7-15-82 11-17-96 10-19-00 1-24-08 3-28-14 2-25-16 10-25-17 SUBJECT: AUTHORITY: INSTRUCTIONS TO MEMBERSHIP

More information

2016 Narragansett Council Fall Cranboree. November 11 th -13 th, 2016 Camp Norse Kingston, MA

2016 Narragansett Council Fall Cranboree. November 11 th -13 th, 2016 Camp Norse Kingston, MA 2016 Narragansett Council Fall Cranboree November 11 th -13 th, 2016 Camp Norse Kingston, MA When: November 11 th -13 th 2016 Where: Cost: Camp Norse Kingston, MA Directions can be found at Narragansettbsa.org

More information

Rules and measuring tapes

Rules and measuring tapes 74 75 76 78 79 Quality criteria for folding rules Folding rules 900 series 600 series 600 N-S series Plastic folding rules 1000 series Rules and measuring tapes 80 81 Quality criteria for measuring tapes

More information

Human Powered Flight THE KREMER HUMAN-POWERED AIRCRAFT FOR SPORT

Human Powered Flight THE KREMER HUMAN-POWERED AIRCRAFT FOR SPORT Human Powered Flight Rules and Regulations for THE KREMER HUMAN-POWERED AIRCRAFT FOR SPORT THE ROYAL AERONAUTICAL SOCIETY 4 Hamilton Place, London, W1V OBQ Telephone +44 (0)20 7670 4345 Fax +44 (0)20 7670

More information

Assembling & Fitting Instruction August 2015

Assembling & Fitting Instruction August 2015 Assembling & Fitting Instruction August 2015 Wave Curtain Heading System Silent Gliss 6010, 6020, 6100, 6103, 6290, 6380, 6465 Silent Gliss 3840, 6120 Silent Gliss 5090, 5200, 5400 Silent Gliss 5100, 5600

More information

STUDENT INFORMATION Name LAST FIRST MIDDLE Address City State ZIP Telephone. Pilot Cert. TYPE CERT # DATE ISSUED Emergency Contact Phone Relationship

STUDENT INFORMATION Name LAST FIRST MIDDLE Address City State ZIP Telephone. Pilot Cert. TYPE CERT # DATE ISSUED Emergency Contact Phone Relationship TRAINING COURSE OUTLINE PAGE: 1 STUDENT INFORMATION Name LAST FIRST MIDDLE Address City State ZIP Telephone HOME WORK Pilot Cert. TYPE CERT # DATE ISSUED Emergency Contact Phone Relationship ENROLLMENT

More information

Roller Coaster Design

Roller Coaster Design Name: Group Members: Per: Due Date: Roller Coaster Design Introduction: The roller coaster is a great example of conversions between potential energy (stored energy) and kinetic energy (the energy of motion).

More information

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M DISCUSS AVIATION OPPORTUNITIES PREPARATION

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M DISCUSS AVIATION OPPORTUNITIES PREPARATION ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M121.01 DISCUSS AVIATION OPPORTUNITIES Total Time: 30 min PREPARATION PRE-LESSON INSTRUCTIONS Resources needed for the delivery

More information

Series 2050 Garden Window Frequently Asked Questions

Series 2050 Garden Window Frequently Asked Questions 1. What is the difference between new construction and retrofit? The difference is in the overall jamb depth and required components: For new construction, the flash flange on the head of the unit is left

More information

TUCSON PATIO AWNING INSTALLATION MANUAL

TUCSON PATIO AWNING INSTALLATION MANUAL TUCSON PATIO AWNING INSTALLATION MANUAL Toll Free 877-792-1775 Fax 877-792-0031 swsuncontrolpro.com sales@swsuncontrol.com 1 INTRODUCTION...3 1.1 Symbols used in this manual... 3 1.2 Personnel requirements...

More information

FEATURES & BENEFITS OF THE TOW PRO ELITE :

FEATURES & BENEFITS OF THE TOW PRO ELITE : To Protect & Preserve PRODUCT MANUAL & FITTING GUIDE tow pro elite TYPE: TAILORED FIT EACH TOW PRO ELITE COMES WITH THE FOLLOWING: 8mm thick body armour material QUICK ZIP SYSTEM to aid fitting 2 CLEAR

More information

HANG GLIDER (RECHARGEABLE)

HANG GLIDER (RECHARGEABLE) HANG GLIDER (RECHARGEABLE) 91192 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com IMPORTANT: If damage is caused due to

More information

Introduction...COMB-2 Design Considerations and Examples...COMB-3

Introduction...COMB-2 Design Considerations and Examples...COMB-3 SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant

More information

Antenna Tower Positioning System

Antenna Tower Positioning System Model 1052 Antenna Tower Positioning System User Manual (Antenna not included) ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design,

More information

It's time. After years of work

It's time. After years of work It's time. After years of work your airplane is complete and ready for its first flight. Almost. No aircraft, not even an amateur-built experimental aircraft, can legally fly unless it carries an airworthiness

More information

Runway Roughness Evaluation- Boeing Bump Methodology

Runway Roughness Evaluation- Boeing Bump Methodology FLIGHT SERVICES Runway Roughness Evaluation- Boeing Bump Methodology Michael Roginski, PE, Principal Engineer Boeing Airport Compatibility Engineering ALACPA XI Seminar, Santiago, Chile September 1-5,

More information

INSTALLATION INSTRUCTIONS for folding arm awnings

INSTALLATION INSTRUCTIONS for folding arm awnings Custom made Awnings and Blinds Item No 0757 INSTALLATION INSTRUCTIONS for folding arm awnings IMPORTANT INFORMATION BEFORE INSTALLING YOUR Updated 08/09/15 AN AWNING INSTALLATION IS A HOME IMPROVEMENT

More information

Termination Procedure LC 1.6mm & 2.0mm Connectors: 1060XX Series

Termination Procedure LC 1.6mm & 2.0mm Connectors: 1060XX Series Connector Piece Parts LC Simplex Connector Boot LC Duplex Connector LC Connector CriMp Tulolng LC Duplex Clip Boot 86001-0110, Rev. B USN30MFO/5/2010 Procedure Chart Procedure Tool Required Tool Part Number

More information

Door Bushing Replacement & Latch Adjustment Monaco Group Coaches

Door Bushing Replacement & Latch Adjustment Monaco Group Coaches Door Bushing Replacement & Latch Adjustment Monaco Group Coaches Contents Door Latch Adjustment & Repair... 1 Symptoms:... 1 Replacing the bushing VS. Adjusting the latch rods.... 1 How the bushing works....

More information

Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master

Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master 1. Assembly instructions 2. Attaching the plastic coated steel cables on the Ultimate frame

More information

GUIDELINES FOR THE AWARD OF MAAA WINGS MOP027

GUIDELINES FOR THE AWARD OF MAAA WINGS MOP027 MODEL AERONAUTICAL ASSOCIATION OF AUSTRALIA GUIDELINES FOR THE AWARD OF MAAA WINGS MOP027 APPROVED: MAAA President 09/03/2008 Table of Contents 1. PURPOSE...1 2. RESPONSIBILITIES...1 3. DEFINITIONS...1

More information

FABRIC LEG STRAP KIT FOR REUSABLE LATEX LEG BAGS

FABRIC LEG STRAP KIT FOR REUSABLE LATEX LEG BAGS FABRIC LEG STRAP KIT FOR REUSABLE LATEX LEG BAGS FOR USE WITH ALL UROCARE LATEX URINARY LEG BAGS UROCARE SPORT BAGS NOT INCLUDED. COMFORTABLE WASHABLE DURABLE & REUSABLE Item 6350 shown ELIMINATE BRUISING,

More information

BRJK11F2, BTJK11F2, BRJK07F2, BTJK07F2, kit

BRJK11F2, BTJK11F2, BRJK07F2, BTJK07F2, kit BRJK11F2, BTJK11F2, BRJK07F2, BTJK07F2, FRONT KITS: BRJK07F4, BTJK07F4 Jeep Wrangler JK BedRug/BedTred Interior Installation Instructions Congratulations on choosing the finest interior flooring kit available

More information

Location: 2. It shows on at least two more places an example of the principle of dichotomy,

Location: 2. It shows on at least two more places an example of the principle of dichotomy, Problem 1 - Requirements Discovery for a Mars formation flying mission (45 minutes, 24 points) Delft University of Technology Course: Systems Engineering & Technical Time: Management Techniques (AE3-S01)

More information