Silent Gliss. Hand Operated Curtain Track Systems

Transcription

1 Hand Operated Curtain Track Systems

2 Application Chart Weight Range Specification Profile Profile Number Dimensions in mm Gliding Channel (mm) Standard Bending Radius (mm) Recess Profile Features / Options Wave Glider Cord Snake Wave Retrofit Glider Roller Glider Safety Glider Picture Hanging System Fitting Options Ceiling Fix Recess Fix Wall Fix Direct Fixing Fitting Surfaces Wood Concrete Suspended ceiling System

3 Specification Profile Profile Number Gliding Channel (mm) Standard Bending Radius (mm Features / Options Fitting Options Ceiling Fix Recess Fix Wall Fix Weight Range ) Dimensions in mm Recess Profile Wave Glider Cord Snake Wave Retrofit Glider Roller Glider Safety Glider Picture Hanging System Direct Fixing Fitting Surfaces Wood Concrete Suspended ceiling System W Systems 1003, 6130 and 6140 are also hand drawn tracks but with a rounded profile; please refer to the Decorative Curtain Poles section of the catalogue. 3

4 4

5 Hand Operated Curtain Track System 1060 Product Information Offered with Snake Wave only up to 4.71m. Hand operated curtain track for light weight curtains in domestic and contract applications. Easy fixing with hidden clamp to all kind of ceilings. Standard colours: anodised aluminium or white powder coated

6 Profile and Bending Information Bent for Snake Wave only. System Options Snake Wave Curtain Track System R / 0.5 Room side All dimensions in cm Precise bending techniques allow Silent Gliss to create a unique appearance of this system. The curtain glides smoothly along the tracks with astonishing effect. Max. system length with Snake Wave is 4.71m. Only applicable with glider cm + 40 cm 5.3 +/ cm 111 cm 151 cm A symmetric appearance of system with equal end distance is only possible if the profile is cut at the lengths shown in the examples above. Further symmetric cutting measurements: 191cm, 231cm, 271cm, 311cm, 351cm, 391cm, 431cm, 471cm Fitting Basic Information 10cm 25 30cm 25 30cm 10cm The fixing distances are meant as a guide only: they may vary in practice, depending on surface and curtain weight. 6

7 Fitting Information Ceiling fixing with clamp Clamp Fix track with at least one clamp 3060 every 300mm. Higher edge of profile to room side. Standard Accessories 1060 Profile 3060 Clamp 3061 Endcover 3085 Spring stop 3511 Glider Useful Measures 3060 Clamp Endcover

8 1060 8

9 Hand Operated Curtain Track System 1011 Product Information Hand operated curtain track for light curtains and nets Thin, elegant and bendable profile for recessing into timber ceilings Pre-drilled every 120mm Standard colour silver only Quick fixing to wood with 7550 centre tool Standard profile length 6m, (profile connector for longer lengths) Can be bent

10 Profile, Bending and Specification Information Min. radius 60mm 1011 Specification guide - download from Silent Gliss 1011 curtain track, hand-drawn, anodised aluminium, complete with gliders 3533 at 16/m. 1 end stop 3016 and 1 spring stop 3032 per length. Top fixed at 240mm. centres to prepared grooved timber or timber sofit prior to plastering....lm. Fitting Information Fixing points 10cm 60 80cm 60 80cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on surface and curtain weight. Silent Gliss Tool 7550 makes fitting to wood more efficient and eliminates damage to the track. A: Centre tool 7550 B: Screw 3019 / 12mm C: Screw 3025 / 18mm A B C The screws above are for fixing to wood When fixing to concrete, screws 2021 will be provided. Fitting Options CAD download through Silent Gliss website (password required) Recess fix in timber with single profile Recess fix in timber with two or multiple profiles The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. 10

11 Standard Accessories 1011 Profile 3016 Endstop 3019 Special screw - 12mm (standard for timber) 3032 Spring stop 3534 Glider 3533 in strip form 7002 Profile protector Optional Accessories 3017 Endstop 3025 Special screw (18mm) 3063 Connecting bridge 3070 Twist eye endstop 3071 Screw twist endstop 3511 Glider 3533 Glider 3548 Retrofit glider 3570 Rotating glider Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm 1011 Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 8.5mm 3068 Loop tape 3562 Standard tape 3571 Hook 3582 Hook 3599 Hook 11

12 Useful Measurements 3063 Connecting bridge

13 Hand Operated Curtain Track System 1012 Product Information Hand operated curtain track for light curtains and nets Especially suitable for trucks, boats, caravans, etc Thin, elegant and bendable ceiling fix profile with special concrete-fixing supports where appropriate Quick fixing to wood with special Silent Gliss 7550 centre tool Pre-drilled every 120mm Standard colour: silver Standard profile length 6m, (profile connector for longer lengths) Can be bent

14 Profile, Bending and Specification Information Can only be bent to two radii - 60mm or 100mm Specification guide - download from (password required). Silent Gliss 1012 curtain track, hand-drawn, anodised aluminium, complete with gliders 3533 at 16/m. 2 endstops 3016 per length, top fixed to timber (by others) at 360mm. centres with special screw Lm. State colour. Fitting Information Fixing points 10cm 30 50cm 30 50cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on surface and curtain weight. Silent Gliss Tools 7550 makes fitting to wood more efficient and eliminates damage to the track. A: Centre tool 7550 B: Screw 3019 / 12mm C: Screw 3025 / 18mm A B C The screws above are for fixing to wood When fixing to concrete, screws 2021 will be provided. Fitting Options Ceiling fix to timber with single profile The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. 14

15 Ceiling fix to timber with two or multiple profiles The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. Fixing to concrete ceilings with support Concrete fixing support (std for concrete) The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. Standard Accessories 1012 Profile 3016 Endstop 3019 Special screw - 12mm (standard for timber) 3112 Concrete fixing support (std for concrete) 3534 Glider 3533 in strip form 7002 Profile protector 1012 Optional Accessories 3025 Special screw (18mm) 3032 Spring stop 3064 Connecting bridge 3070 Twist eye endstop 3071 Screw twist endstop 3511 Glider 3533 Glider 3548 Retrofit glider 3570 Rotating glider Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm 15

16 10433 Draw rod with hook, 125cm Draw rod with hook, 150cm Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 6.5mm 3068 Loop tape 3562 Standard tape 3571 Hook 3582 Hook 3599 Hook Useful Measurements 3064 Connecting bridge

17 Hand Operated Curtain Track System 1021 Product Information Discreet wall fix hand operated curtain track for light curtains and nets Widely used for aircraft, trucks, boats, caravans, etc Ideal for mounting directly on to window frames/doors or wooden batten Pre-drilled every 300mm Standard colours: silver, white. Standard profile lengths: 5m silver only, 6m all colours Can be bent

18 Profile, Bending and Specification Information Standard radius 100mm The standard radius is recommended for optimal operation. The minimum possible radius is 60mm. Specification Guide - download from Silent Gliss Extranet Silent Gliss 1021 curtain track, hand-drawn, anodised aluminium, complete with gliders 3533 at 16/m. and 2 stops 3016 per length, face fixed level with under-side timber batten (by others) at 300mm. centres with special screw Lm. Fitting Information Fixing points 10cm 30cm 30cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on surface and curtain weight. Fitting Options Face fix profile Fixing profile underneath The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. 18

19 Standard Accessories 1021 Profile 3016 Endstop 3534 Glider 3533 in strip form 6835A Special roundhead screw 12mm No. 4 Optional Accessories 3017 Endstop 3032 Spring stop 3070 Twist eye endstop 3071 Screw twist endstop 3511 Glider 3533 Glider 3548 Retrofit glider 3570 Rotating glider 3580 Side mounted glider/hook Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm 6835B Special roundhead screw 24mm No C Pozidrive screw 12mm No Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 7.5mm 3068 Loop tape 3562 Standard tape 3571 Hook 3582 Hook 19

20 3599 Hook

21 Hand Operated Curtain Track System 1025 Product Information Discreet ceiling fix track ideal for mounting preferably to wood Widely used for aircraft, trucks, boats, caravans For light curtains and nets Pre-drilled every 300mm Standard colours: silver, white, gold Standard profile lengths: 5m silver only, 6m all colours Can be bent

22 Profile, Bending and Specification Information Standard radius 100mm 1025 We recommend the standard radius for optimal operation, but the minimum possible radius is 60mm. Specification Guide - download from (password required). Silent Gliss 1025 curtain track, hand-drawn, anodised aluminium, complete with gliders 3533 at 16/m. nd 2 stops 3016 per length, top fixed to timber (by others) at 300mm. centres with special screw Lm. Fitting Information Fixing points 10cm 30cm 30cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on the surface and curtain weight. Fitting Options Ceiling fix to timber with single profile Ceiling fix to timber with two or multiple profiles The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. 22

23 Standard Accessories 1025 Profile 3016 Endstop 3534 Glider 3533 in strip form 6835A Special roundhead screw 12mm No. 4 Optional Accessories 3017 Endstop 3032 Spring stop 3070 Twist eye endstop 3071 Screw twist endstop 3511 Glider 3532 Glider 3533 Glider 3548 Retrofit glider 3570 Rotating glider 3580 Side mounted glider/hook Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm 6835B Special roundhead screw 24mm No C Pozidrive screw 12mm No.4 Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 7.5mm 3068 Loop tape 3571 Hook 3582 Hook 3599 Hook 23

24

25 Hand Operated Curtain Track System 1090 Product Information Wall or ceiling fix hand operated curtain track for light curtains Unobtrusive but deceptively strong Double fixing possible for two parallel curtains with single fixing screw Standard profile colours: white, silver (5m and 6m) Profile connector for longer lengths Can be bent

26 Profile, Bending and Specification Information Standard radius 200mm The standard radius is recommended for optimal operation. The minimum possible radius is 60mm. Specification Guide- download from the Silent Gliss website (password required) Silent Gliss 1090 curtain track, hand-drawn, anodised aluminium, complete with gliders 3533 at 16/m. and 2 enstops 3016 per length. Top fixed with nylon brackets 3176/face fixed with nylong brackets 3175, each screwed to timber/plugged and screwed to blockwork/concrete at 450mm. centres....lm. Bronze track, as above. Silent Gliss 1090W, as above except with powder coated white finished aluminium. Fitting Information Bracket positioning and fixing with brackets 3175 and cm 30 50cm 30 50cm 10cm The fixing distances are meant as a guide only: they may vary in practice, depending on surface and curtain weight A Installation: push track on bracket in direction indicated Removal: place screwdriver where indicated (A) and twist. Pull track away from bracket Fitting Options Ceiling fix with bracket Top fix bracket 26

27 Ceiling double fix with bracket 3113 / 3115 X (mm) X The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Wall fix with bracket Bracket Wall fitting with Smart Fix and bracket 3176 X (mm) X Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG (M4x12) for fixing bracket SG Wall fitting with Square Smart Fix and bracket X (mm) X Square Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG (M4x12) for fixing bracket SG Standard Accessories 18R Screw 25mm. No. 8 roundhead 1090 Profile 3016 Endstop 3175 Bracket 27

28 3534 Glider 3533 in strip form Optional Accessories 0516 Pelmet spacer 3071 Screw twist endstop 3096 Connecting bridge cm spacer for double fixing cm spacer for double fixing 3176 Top fix bracket 3548 Retrofit glider 3570 Rotating glider Draw rod with hook, 50cm Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 125cm Draw rod with hook, 150cm Draw rod with hook, 150cm Smart Fix, 60 mm set Smart Fix, 80 mm set Smart Fix, 100 mm set Smart Fix, 120 mm set Smart Fix, 150 mm set Smart Fix, 200 mm set Square Smart Fix, 60 mm set Square Smart Fix, 80 mm set Square Smart Fix, 100 mm set Square Smart Fix, 120 mm set Square Smart Fix, 150 mm set Square Smart Fix, 200 mm set 28

29 Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 7.5mm 3562 Standard tape 3582 Hook 3599 Hook Useful Measurements 0516 Pelmet spacer

30

31 Hand Operated Curtain Track System 3840W Product Information For use with Wave Standard heading system Purpose designed for ceiling fixing - neat attractive track Ideal for contract or domestic use Same appearance from both sides Standard length 6m, can be joined Standard colours: silver, white, gold, antique bronze, black For medium weight curtains Can be bent 3840W 31

32 Profile, Bending and Specification Information Standard radius 200mm Specification Guide - download from (password required). Silent Gliss 3840W curtain track, hand drawn, anodised aluminium, assembled complete with wave glider-cord 6345/6346. Top fix with special fixing clamp 3825/special fixing bracket 3832 at max 600mm. centres each screwed to timber/plugged and screwed to block/concrete.... Lm. How To Measure Stack depth Wave Standard a c Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) Stack width (b) 23 per metre of track + endpiece Min distance (c) 8 b per metre of track + endpiece per metre of track + endpiece W c a a = Stack depth b = Stack size c = Min. distance c Wave standard with roller gliders Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) per metre of track + endpiece Stack width (b) 21 per metre of track + endpiece 11 Min distance (c) per metre of track + endpiece 11 (dimensions in cm) Note: Minimum distance (c) includes a standard 3cm clearance (front and back). System Dimensions 32

33 System Options Wave Standard curtain heading system Wave is an exciting new contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant. When using the Wave curtain heading system please note the maximum recommended curtain weight is 2.5kg/m or 10kg/m with wave roller glider 6098W. The Wave standard components are: 6345 Glider Cord 60mm 6346 Glider Cord 80mm 6007 End stop The items listed below are all supplied at an additional cost as per the price list Wave hardware components for Enhanced Wave (80mm glider cord only) are: 2255 Adjustable brake 6364 Extension (used with 6365) 6365 Hanger (used with 6364) 6366 Carrier for draw rod Roller Gliders must be ordered separately 6098W Wave roller glider 80mm W Optional enhanced components to improve the presentation of the curtain: 3582 Hook 6349 Curtain tape 6363 Iron-on top hemming tape Lead weight for hem of curtain 50gr/m Fabric weight for side edge of curtain 3840W Fitting Information Bracket and profile Positioning 10 cm cm cm 10 cm These fixing distances are a guide only, they may vary in practice depending on surface and curtain weight. Handling of fixing clamp 3825 Higher edge of profile to the roomside. Clamp arm to the window. 33

34 Handling of fixing bracket 3832 Higher edge of profile to the roomside. Fitting Options Ceiling fix with clamp Clamp (35mm) Min. distance from wall when using Wave XL: 220mm. Ceiling fix with bracket Twist clamp 3840W Min. distance from wall when using Wave XL: 220mm. Ceiling fix with bracket Top fix bracket Min. distance from wall when using Wave XL: 220mm. 34

35 Wall fitting with Smart Fix and bracket 3826 x (mm) X Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG10492 (M4x8) for fixing bracket SG3826 Wall fitting with Square Smart Fix and bracket 3826 x (mm) X Square Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG10492 (M4x8) for fixing bracket SG3826 Wall fitting with Universal Smart Fix and bracket 3826 X (mm) X Universal Smart Fix ( mm) 3826 Top fix bracket 3840W Brackets feature thread for screw SG10492 (M4x8) for fixing bracket SG3826 Wall fix with bracket Bracket (62mm) Standard Accessories 3825 Clamp (35mm) 3841 Profile 3842 End cover 6064 Screw twist endstop 35

36 6083 Glider 6283 Roller glider 6345 Wave glider cord (60mm) 6346 Wave glider cord (80mm) 1148C Countersunk screw 6098W Wave roller glider cord (80mm) Optional Accessories 2216 Cord 3826 Top fix bracket 3832 Twist clamp 3836 Bracket (62mm) 6007 Endstop 6349 Wave curtain heading tape 6382 Limit stop 6394 Carrier Universal Smart Fix, 120 mm set Universal Smart Fix, 150 mm set Universal Smart Fix, 200 mm set Smart Fix, 60 mm set Smart Fix, 80 mm set Smart Fix, 100 mm set 3840W Smart Fix, 120 mm set Smart Fix, 150 mm set Smart Fix, 200 mm set Square Smart Fix, 60 mm set Square Smart Fix, 80 mm set Square Smart Fix, 100 mm set Square Smart Fix, 120 mm set Square Smart Fix, 150 mm set Square Smart Fix, 200 mm set Sewing and Wave Accessories 2216 Cord 2255 Adjustable brake 36

37 3582 Hook 6007 Endstop 6345 Wave glider cord (60mm) 6346 Wave glider cord (80mm) 6349 Curtain tape 6363 Top hemming tape 6364 Extension 6365 Hanger 6366 Wave carrier for draw rod 6391 Hanger 6392 Heading film 6393 Glider 6395 Extension 6398 Clip 6399 Carrier for Draw rod Lead weight 50 gr/m Fabric weight 6098W Wave roller glider cord (80mm) 3840W 37

38 3840W 38

39 Hand Operated Curtain Track System 6465 Product Information System designed for Snake Wave Curtain Track System. For light curtains in domestic and contract applications. Easy fixing with hidden clamp to all kind of ceilings. Standard colours: anodised aluminium or white powder coated. Supplied pre-bent and assembled, complete with curtain. Maximum system length 4.7m

40 Profile and Bending Information Bent For Snake Wave Only System Options Snake Wave Curtain Track System R / 0.5 Room side All dimensions in cm Precise bending techniques allow Silent Gliss to bend the track evenly within narrow parameters to create a unique Snake Wave appearance. The curtain glides smoothly along the track creating an astonishing effect. Max. system length with Snake Wave is 4.70m. Only applicable with glider cm + 48 cm / cm 133 cm 181 cm A symmetric appearance of system with equal endings is only possible if profile is cut at the length examples shown above. Further symmetric cutting measurements: 229cm, 277cm, 325cm, 373cm, 421cm, 469cm Fitting Information 10cm 25 30cm 25 30cm 10cm The fixing distances are meant as a guide only: they may vary in practice, depending on surface and curtain weight. 40

41 Fitting Options Ceiling fitting with clamp Clamp The distance indicated above refers to a fixing point at its closest point to the wall to permit the rotation of the clamp. Standard Accessories 3060 Clamp 6065 Twist eye endstop 6082 Glider 6465 Profile 6471 End cover 1148C Countersunk screw Useful Measures

42

43 Hand Operated Curtain Track System 1080 Product Information Versatile, sturdy hand-operated curtain track for domestic or contract use For medium weight curtains Elegant, particularly suited for deep curtain headings Standard colours: silver, brushed aluminium, white, gold, antique bronze, black and cream. Gold and brown brackets are available, otherwise use white Standard lengths: 5m (silver and white only), 6m (all colours). Profile connector for longer lengths Easy ceiling or wall fixing or can be suspended from hanger rods Wide variety of accessories for professional fitters Profile also used as picture hanging system and for pelmet/valance rails Can be bent

44 Profile, Bending and Specification Information Standard radius 100mm Arch radius 300mm Standard radius is recommended for optimal operation. Minimum possible radius is 60mm. Specification guide - download from (password protected). Silent Gliss 1080 curtain track, hand drawn, annodised aluminium complete with gliders 3533 at 16/m, 2 endcover/stops 3667 per length. Face fixed with nylon bracket 3630 each screwed to timber/plugged and screwed to blockwork/concrete at 600mm centres....lm. Bronze, gold and silver profile anodised aluminium. All other coloured track, powder coated finish. Fitting Information Bracket positioning and fixing with universal brackets 3603, 3630, 3655, cm 60 80cm 60 80cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on surface and curtain weight Installation: Roll track onto bracket in direction indicated Removal: 1. Press to release 2. Rotate forward for removal Fitting Options Ceiling fix with bracket Top fix bracket The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. 44

45 Ceiling fix with bracket 3603 and bracket arms X (mm) X Bracket arm 3603 Top fix bracket The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Batten thickness depends on length of screw. Suspended fix with bracket 3603 and hanger rod system 3639 X (m) X max 50 min Hanger assembly (complete) Top fix bracket Wall support 28 Wall fix with universal brackets 3630/3655/3660 X (mm) X Bracket 3655 Long universal bracket 3660 Extra long universal bracket Wall fitting with Smart Fix and bracket X (mm) X Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG (M4x8) for fixing bracket SG

46 Wall fitting with Square Smart Fix and bracket 3603 X (mm) X Square Smart Fix ( mm) 3603 Top fix bracket 3603 Top fix bracket Brackets feature thread for screw SG (M4x8) for fixing bracket SG Wall fitting with Universal Smart Fix and bracket 3603 X (mm) X Universal Smart Fix ( mm) 3603 Top fix bracket Brackets feature thread for screw SG (M4x12) for fixing bracket SG Standard Accessories 18R Screw 25mm. No. 8 roundhead 1080 Profile Glider 3533 in strip form 3630 Bracket 3667 Endcover (32mm) Optional Accessories 0516 Pelmet spacer 3016 Endstop 3017 Endstop 3070 Twist eye endstop 3071 Screw twist endstop 3533 Glider 3548 Retrofit glider 3570 Rotating glider 3602 Wall support 3603 Top fix bracket 46

47 3604 Corner piece 3606 Snap fastener 3618 Wall support 3620 Connecting bridge 3626 Return fixing bracket 3630 Bracket 3638 Re-inforced corner piece for pelmets 3655 Long universal bracket Draw rod with hook, 50cm Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 125cm Draw rod with hook, 150cm Draw rod with hook, 150cm Universal Smart Fix, 120 mm set Universal Smart Fix, 150 mm set Universal Smart Fix, 200 mm set Smart Fix, 60 mm set Smart Fix, 80 mm set Smart Fix, 100 mm set Smart Fix, 120 mm set Smart Fix, 150 mm set Smart Fix, 200 mm set Square Smart Fix, 60 mm set Square Smart Fix, 80 mm set Square Smart Fix, 100 mm set Square Smart Fix, 120 mm set Square Smart Fix, 150 mm set Square Smart Fix, 200 mm set Sets 3639 Hanger rod assembly 3697 Rod 1 47

48 3611 Stud Support with screw Track insert 1 Useful Information and Sewing Accessories Diagram uses standard 3533/3534 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3570 = 6.0mm 3548 = 7.5mm 3562 Standard tape 3571 Hook 3582 Hook 3599 Hook 6146 Hook 1080 Useful Measurements 0516 Pelmet spacer Connecting bridge

49 Hand Operated Curtain Track System 1200 Product Information Robust and versatile wall and ceiling fix hand operated curtain track For light to medium weight curtains Patented glider which glides on the profile edge, minimizing friction The quick-clip gliders 3933 can be easily added or removed without taking track down or apart Easy ceiling or wall fix to all surfaces Standard colour: white powder coated Metallic line colours available are silver anodised, black, anthracite, gunmetal, brushed aluminium and chrome effect Standard length of the profiles is 6m, with the exception of chrome, anthracite and brushed aluminium which are available in 4m lengths Can be bent

50 Profile, Bending and Specification Information Standard radius 100mm 1200 The standard radius is recommended for optimal operation. Specification Guide - download from (password required). Silent Gliss 1200 hand drawn curtain track in white powder-coated aluminium. Fix to wall with brackets 3175/ceiling with brackets 3176 every 30-50cm. Special gliders should be fitted at 14/m to run on back rims of channel so as to keep curtain heading upright. Fit with end covers 3986 at either end. Fitting Information Bracket positioning and fixing with 3175 and cm cm cm 10 cm The fixing distances are meant as guide a only: they may vary in practice depending on surface or curtain weight. A Installation: push track on bracket in direction indicated Removal: place screwdriver where indicated (A) and twist. Pull track away from bracket 1200 Quick-clip glider Easily clipped in and out of profile. 50

51 Fitting Options Ceiling fix with bracket Top fix bracket Wall fix with bracket Bracket Standard Accessories 18R Screw 25mm. No. 8 roundhead 1200 Profile 3175 Bracket 3933 Glider 3933 in strip form 3986 Endcover (white, black, grey and dark grey) Optional Accessories cm spacer for double fixing cm spacer for double fixing 3176 Top fix bracket 3942 Endstop 3945 Magnetic glider (part of set 3947) 3946 Magnetic glider (part of set 3947) Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm 51

52 Useful Information and Sewing Accessories Diagram uses standard 3933 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3945/3946 = 8mm 3562 Standard tape 3582 Hook 3599 Hook

53 Picture Hanging System 3600 Product Information Specially developed picture hanging system for the quick and precise hanging and moving of framed pictures Pictures can be moved vertically or horizontally without re-drilling the wall Suitable for domestic use as well as galleries, schools, banks, offices, etc. For pictures weighing up to 10kg Easy wall fixing with specially developed button-fix brackets Standard colours: silver, white, gold, bronze, black or cream Can be bent

54 Profile, Bending and Specification Information Standard radius 200mm Specification guide - download from (password required) Silent Gliss 3600 picture hanging system supplied made to measure and complete comprising anodised aluminium profile 1080 in satin silver or powder coated white as standard and hanging set Specially developed for the quick and precise hanging or moving of pictures. Profile optional in bronze, gold, black, cream, gunmetal and chrome effect. Maximum Weight per picture 10KG. Fitting Information Bracket 3606 fixing points 5 cm cm cm 5 cm Fix invisible snap fastener brackets approx. every 30-50cm. Click on and off snap fastener Hanging up of picture with Set 3600 Click-in hooks 3663 as shown on the picture. A B C A: Fixing cords with hooks 3663 B and C: Fixing cords by using existing frame hangers Adjust and fix cord by turning the plastic screw. 54

55 Fitting Options Direct to wall fixing of snap fastener bracket Snap fastener Standard Accessories Standard set 3600 Picture hanging set, containing 3634 Height adjuster Cord (ø 1.5mm) 5m 3663 Hook 4 Components 1080 Profile 3604 Corner piece 3605 End cover 3606 Snap fastener Height adjuster 3637 Cord (ø 1.5mm) 3657 Connecting bridge 3663 Hook Useful Measurements 3657 Connecting bridge 70 55

56

57 Hand Operated Curtain Track System 6021 Safety Track Product Information Wall fix safety track - unique gliders designed to separate from profile when a specific weight is applied (4-6kg) Discreet hand drawn curtain track for contract applications - ideal for hospital and schools Blue glider supplied for leading edge of curtain designed to separate at a higher weight (8-10kg) as more pressure is applied here when curtains are operated No gap between profile and wall For light to medium weight curtains White profile only Standard profile lengths available - 5m and 6m 6021 profile is not pre-drilled in order to prevent impairing appearance from the room Unique blue and yellow safety gliders for easy identification

58 Profile, Bending and Specification Information Cannot be bent Specification Guide - download from (password required). Silent Gliss 6021 hand operated curtain track in white powder coated aluminium. Fix track to wall with self drilling wood screws. Special gliders to run in pofile 6148 (10/m) amd 6149 (2/length). Fix with secure endcovers 6122 at either end. Safety System Key Parts Safety release function A B C A: Gliders can easily be clicked into profile B: Glider deforms under pressure C: Release under following pull weights: Glider 6148 (yellow for release between 4-6kg pull); Glider 6149 (blue for release between 8-10kg pull) : Endstop (with end glider 6148 in place) 6021/6290 system can assist in the prevention of self harm in hospitals, schools and psychiatric situations. Please see specific pull out weights on individual gliders. Please also note that the longer the individual track and the more gliders used, the cumulative total pull-out weight when in a stacked position will increase and therefore support more weight. A risk assessment of the area should always be carried out. 58

59 Fitting Information Maximum recommended fixing points Important: when installing system 6021 with the intention of reducing the opportunity of self harm, Silent Gliss recommend the following: 1 cm 30 cm max 30 cm max 1 cm - The first and final fixings must be no more than 1cm from either end of track. - If fixing to a baton, ensure the profile does not project past the edge of the baton. - If fixing to uneven wall surfaces (with or without batons), use a sealant or similar compound around the baton/track to ensure no gaps remain. Fitting Options Wall fix 28 Standard Accessories 6021 Profile 6122 Endstop 6148 Safety glider (yellow) 6149 Safety glider (blue) 6021 Optional Accessories 0688 Wood screw (self drilling) Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm 59

60 Useful Information and Sewing Accessories Diagram uses standard safety glider and is measured to the inside of the glider eye Hook 3599 Hook

61 Hand Operated Curtain Track System 6290 Safety Track Product Information Ceiling fix safety track - unique gliders designed to separate from profile when a specific weight is applied (4-6kg) Discreet hand drawn curtain track for contract applications - ideal for hospitals and schools Blue glider supplied for leading edge of curtain designed to separate at a higher weight (8-10kg) as more pressure is applied here when curtains are operated Profile is not pre-drilled in order to prevent impairing appearance from the room Profile fixed using self drilling screws. No gap between profile and ceiling For light to medium weight curtains White profile only Standard profile lengths available - 5m and 6m Unique blue and yellow safety gliders for easy identification

62 Profile, Bending and Specification Information 6290 Ceiling Fix Cannot be bent Specification Guide - download from (password required) Silent Gliss 6290 hand operated curtain track in white powder coated aluminium. Fix track to ceiling with self drilling wood screws. Special gliders to run in pofile 6148 (10/m) amd 6149 (2/length). Fix with secure endcovers 6122 at either end. Safety System Key Parts Safety Release Function A B C A: Gliders can easily be clicked into profile B: Glider deforms under pressure C: Release under following pull weights: Glider 6148 (yellow for release between 4-6kg pull); Glider 6149 (blue for release between 8-10kg pull) : Endstop (with end glider 6149 in place) /6290 system can assist in the prevention of self harm in hospitals, schools and psychiatric situations. Please see specific pull out weights on individual gliders. Please also note that the longer the individual track and the more gliders used, the cumulative total pull-out weight when in a stacked position will increase and therefore support more weight. A risk assessment of the area should always be carried out. 62

63 Fitting Information Maximum recommended fixing points Important: when installing system 6290 with the intention of reducing the opportunity of self harm, Silent Gliss recommend the following: 1 cm 30 cm max 30 cm max 1 cm - The first and final fixings must be no more than 1cm from either end of the track. - If fixing to a baton, ensure the profile does not project past the edge of the baton. - If fixing to uneven wall surfaces (with or without batons), use a sealant or similar compound around the baton/track to ensure no gaps remain. Fitting Options Ceiling fix with 6290 with single profile The final distance may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Ceiling fix with two or multiple profiles The final distance may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Standard Accessories 6122 Endstop 6148 Safety glider (yellow) 6149 Safety glider (blue) 6290 Profile Optional Accessories 0688 Wood screw (self drilling) Draw rod with hook, 50cm 63

64 10431 Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm Useful Information and Sewing Accessories Diagram uses safety glider measured to the inside of the glider eye Standard tape 3582 Hook 3599 Hook

65 Hand Operated Curtain Track System 6243 Product Information Single channel curtain track for medium to heavy weight contract applications. Thin and bendable recess profile with 5.4mm gliding channel. Minimum bending radius 25cm. Punched every 200mm. Supplied in white as standard. Standard profile length is 6m (connecting bridge available for longer lengths). Can be bent. Available with Wave curtain heading systems

66 Profile and Bending Information Min. radius 20cm Specification Guide Silent Gliss 6243 curtain track, hand-drawn, anodised aluminium, complete with gliders 6096 at 16/m. 1 end stop 6065 and 1 spring stop 6053 per length. Top fixed with punched holes every 200mm. Fitting Information Fixing points 10cm 40cm 40cm 10cm The fixing distances are meant as a guide only: they may vary in practice depending on surface and curtain weight. Stack Depth Wave Standard a c Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) Stack width (b) 23 per metre of track + endpiece Min distance (c) 8 b per metre of track + endpiece per metre of track + endpiece 10 c a c Wave standard with roller gliders 18 per metre of track + endpiece 11 a = Stack depth b = Stack size c = Min. distance Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) Stack width (b) 21 per metre of track + endpiece Min distance (c) per metre of track + endpiece 11 (dimensions in cm) Note: Minimum distance (c) includes a standard 3cm clearance (front and back). 66

67 System Options Wave Standard curtain heading system Wave is an exciting new contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant. When using the Wave curtain heading system please note that the maximum recommended curtain weight is 2.5kg/m or 10kg/m with wave roller glider 6098W The Wave Standard components are: 6345 Glider-cord 60mm 6346 Glider-cord 80mm 6007 End stop The items listed below are all supplied at an additional cost as per the price list: Wave hardware components for Enhanced Wave (80mm glider cord only) are: 2255 Adjustable brake 6364 Extension (used with 6365) 6365 Hanger (used with 6364) 6366 Carrier for draw rod Roller gliders 6098W must be ordered separately: W Optional enhanced components to improve the presentation of the curtain: 3582 Hook 6349 Wave curtain tape 6363 Iron on top hemming tape Lead weight for hem of curtain 50 gr/m Fabric weight for side edge of curtain 6243 Fitting Options CAD download through Silent Gliss e-catalogue Recess ceiling fix The final distances from the wall depend on curtain weight, make-up and any obstructions. The profile is punched every 200mm. Standard Accessories 0240 Screw 6053 Spring stop 67

68 6065 Twist eye endstop 6096 Glider 6083 in strip form 6243 Profile 7002 Profile protector Optional Accessories 2255 Adjustable brake 3067 Connecting bridge 3582 Hook 6057 Hook 6083 Glider 6086 Spring stop 6096 Glider 6083 in strip form 6345 Wave glider cord (60mm) 6346 Wave glider cord (80mm) 6349 Curtain tape 6363 Top hemming tape 6364 Extension 6365 Hanger 6366 Wave carrier for draw rod 6391 Hanger 6392 Heading film Glider 6395 Extension 6398 Clip 6399 Carrier for Draw rod Lead weight 50 gr/m Fabric weight 6098W Wave roller glider cord (80mm) 68

69 Hand Operated Curtain Track System 1280 Product Information Versatile hand operated curtain track system for contract and domestic applications For medium to heavy weight curtains Patented roller gliders glide on rim of front channel with very little friction for smooth and easy operation Standard profile colour: white Easy wall or ceiling fixing Available in 4m, 5m and 6m lengths Can be bent

70 Profile, Bending and Specification Information Standard radius 200mm 1280 The standard radius is recommended for optimal operation. The minimum possible radius is 150mm. Specification Guide- download from (password required). Silent Gliss 1280 hand drawn curtain track in white powder-coated aluminium. Use roller gliders 3922 at 10/m, fix to wall with brackets 3630/3660, ceiling with brackets 3603 every 300mm. Fit endcovers Fitting Information Bracket positioning and fixing with universal brackets 3603, 3630, 3655, cm cm cm 10 cm The fixing distances are meant as a guide only: they may vary in practice depending on the surface and curtain weight. 1 2 Installation: Roll track onto bracket in direction indicated Removal: 1. Press to release 2. Rotate forward for removal 1280 Quick-clip glider System 1280 is supplied with 3922 roller glider as standard, quick-clip glider 3933 is available as an optional accessory. 70

71 Fitting Options Ceiling fix with bracket Top fix bracket The final distances may be outside of the recommendations above depending on curtain heading, make-up and any obstructions. Wall fix with universal brackets 3630/3655/3660 X (mm) X Bracket 3655 Long universal bracket 3660 Extra long universal bracket Wall fitting with Smart Fix and bracket 3603 X X (mm) Brackets feature thread for screw SG (M4x8) for fixing bracket SG Smart Fix ( mm) Top fix bracket 1280 Wall fitting with Square Smart Fix and bracket 3603 X (mm) X Square Smart Fix ( mm) Top fix bracket Brackets feature thread for screw SG (M4x8) for fixing bracket SG

72 Wall fitting with Universal Smart Fix and bracket 3603 X (mm) X Universal Smart Fix ( mm) 3603 Top fix bracket Brackets feature thread for screw SG (M4x12) for fixing bracket SG Standard Accessories 18R Screw 25mm. No. 8 roundhead 1280 Profile 3630 Bracket 3922 Roller 3911 in strip form 3985 Endcover Optional Accessories 3603 Top fix bracket 3620 Connecting bridge 3660 Extra long universal bracket 3932 Spring stop Glider 3933 in strip form 3942 Endstop 3975 Overlap arm for pulling by hand Draw rod with hook, 50cm Draw rod with hook, 75cm Draw rod with hook, 100cm Draw rod with hook, 125cm Draw rod with hook, 150cm Universal Smart Fix, 120 mm set Universal Smart Fix, 150 mm set Universal Smart Fix, 200 mm set Smart Fix, 60 mm set Smart Fix, 80 mm set Smart Fix, 100 mm set 72

73 11203 Smart Fix, 120 mm set Smart Fix, 150 mm set Square Smart Fix, 60 mm set Square Smart Fix, 80 mm set Square Smart Fix, 100 mm set Square Smart Fix, 120 mm set Square Smart Fix, 150 mm set 3935A Overlap arm straight with S-hook A Overlap arm with s-hook 3949 Useful Information and Sewing Accessories Diagram uses standard 3922 glider and is measured to the inside of the glider eye. For optional gliders substitute dimensions below: 3945/3946 = 8mm 3933 = 8mm 3562 Standard tape 3582 Hook 3599 Hook 1280 Useful Measurements 3620 Connecting bridge

74

75

76 Silent Gliss Ltd Pyramid Business Park Poorhole Lane Broadstairs Kent CT10 2PT Great Britain Silent Gliss Global Ltd Pyramid Business Park Poorhole Lane Broadstairs Kent CT10 2PT Great Britain 76 Tel: +44 (0) Fax: +44 (0) Tel: +44 (0) Fax: +44 (0) SGGB_TB_HD_ /